Candy FCE 848 VX WF/E Manuel utilisateur

Catégorie
Micro-ondes
Taper
Manuel utilisateur
GB
FR
02
18
IT
ES
34
50
DE
66
CZ
82
PL
RU
98
114
PT
130
USER INSTRUCTIONS
OVENS
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES
MANUALE D’ISTRUZIONI
FORNO
INSTRUCCIONES DE USO
HORNOS EMPOTRABLES
BEDIENUNGSANLEITUNG
BACKOFEN
POKYNY PRO UŽIVATELE
TROUBY
INSTRUKJA OBSŁUGI
PIEKARNIKI DO ZABUDOWY
Инстукции для пользователей
Духовые шкафы
PIEKARNIKI DO ZABUDOWY
INSTRUKJA OBSŁUGI
CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy
Safety Indications
GB 02
WARNING: the appliance and accessible parts become hot during use.
Be carefulnottotouch anyhot parts.
The appliance can be used by those aged 8 or over and by those with
limited physical, sensorial or mental capacities, without experience or
knowledge of the product, only if supervised or provided with
instruction as to the operation of the appliance, in a safe way with
awareness of the possible risks.
Children under 8 should be kept at a safe distance from the appliance
if not continuouslysupervised.
Cook the vegetables in a container with a lid insteadof an open tray.
• During cooking, moisture may condense inside the oven cavity or on
the glass of the door. This is a normal condition. To reduce this effect,
wait 10-15 minutes after turning on the power before putting food
inside the oven. ln any case, the condensation disappears when the
ovenreachesthe cooking temperature.
WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoidthe possibility of electric shocks.
WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should not
be powered by an external switching device, such as a timer, or be
connected to a circuitthat is regularlyswitchedon and off.
Children should not play with the appliance.
Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
WARNING: the accessible parts can become hot when the grill is in
use. Children should be kept at a safe distance.
Cleaning and maintenance should not be carried out by unsupervised
children.
Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and cause
the glass to shatter.
The oven must be switched off before removing the removable parts.
Aftercleaning, reassemblethem according the instructions.
GB 03
Failure to comply with the above can compromise the safety of the
appliance and invalidatethe guarantee.
Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must have
ground contact connected and in operation. The earth conductor is
yellow-green in colour. This operation should be carried out by a
suitably qualified professional. ln case of incompatibility between the
socket and the appliance plug, ask a qualified electrician to substitute
the socket with another suitable type. The plug and the socket must be
conformed to the current norms of the installation country. Connection
to the power source can also be made by placing an omnipolar breaker
between the appliance and the power source that can bear the
maximum connected load and that is in line with current legislation.
The yellow-green earth cable should not be interrupted by the breaker.
The socket or omnipolar breaker used for the connection should be
easily accessible when the appliance is installed.
Only use the meat proberecommended for this oven.
Do not use a steamcleaner for cleaning operations.
• The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.
lf the power cable is damaged, it should be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department. The type of power cable must be
H05V2V2-F. This operation should be carried out by a suitably qualified
professional. The earth conductor (yellow-green) must be
approximately 10 mm longer than the other conductors. For any
repairs, refer only to the Customer Care Department and request the
use of original spareparts.
Any excess of spilled materialshould be removedbefore cleaning.
A long power supply failure during an occurring cooking phase may
cause a malfunction of the monitor. ln this case contact customer
service.
The appliance must not be installed behind a decorative door in order
toavoid overheating.
• When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity. The shelf must be inserted
completely into the cavity.
WARNING: Do not line the oven walls with aluminium foilor single-use
protection available from stores. Aluminium foil or any other
protection, in direct contact with the hot enamel, risk melting and
deteriorating the enamel of the insides.
WARNING: Neverremove the oven door seal.
CAUTION: Do not refill the cavity bottom with water during cooking or
when the oven is hot.
No additional operation/setting is required in order to operate the
appliance at the rated frequencies.
GB 04
General Instructions
6
1.1 Safety indications
1.2 Electrical safety
1.3 Recommendations
1.4 Installation
1.5 Waste management
1.6 Conformity declaration
2.1 Overview
2.2 Accessories
2.3 First use
Product Description
8
3.1 Display description
3.2 Cooking modes
Use of the Oven
9
4.1 General notes on cleaning
4.2 Self-cleaning oven with catalytic
4.3 Maintenance
• Removing and cleaning wire racks
• Removal of the oven window
• Removal and cleaning of the glass
door
Oven Cleaning and Maintenance
14
5.1 F.A.Q.
Troubleshooting
17
Summary
GB 05
1. General Instructions
NOTE: The oven functions, properties and accessories cited in this manual will vary, depending on the
model youhave purchased.
We thank you for choosing one of our products. For the
best results with your oven, you should read this
manual carefully and retain it for future reference.
Before installing the oven, take note of the serial
number so that you can give it to customer service staff
if any repairs are required. Having removed the oven
from its packaging, check that it has not been damaged
during transportation. If you have doubts, do not use
the oven and refer to a qualified technician for advice.
Keep all of the packaging material (plastic bags,
polystyrene, nails) out of the reach of children. When
the oven is switched on for the first time, strong
smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven
heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to
dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where
the instructionscontainedin this document are not observed.
1.1 Safety Indications
- Do not touchthe appliancewith wet or damp hands or feet;
The use of anyelectrical appliance implies the observance of some fundamental rules:
- Do not pull on the powercable to disconnect the plug fromthe socket;
- In case of malfunctionand/or poor operation,switch offthe appliance and do not tamper with it.
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for
example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot
be held responsiblefor anydamage resultingfrom improper, incorrector unreasonable usage.
- In generalthe use of adaptors,multiple socketsand extensioncables is not recommended;
1.2 Electrical Safety
Before connecting the oven tothe powersupply, ask a qualified electrician to check the continuity of the
power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other
problems caused by failure to connect the oven to the earth terminal or by an earth connection that has
defective continuity.
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of
installation. The manufacturer accepts no responsibility forany damage causedby the failureto observe
these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the country of installation. The
electrical supply should be protected with suitable fuses and the cables used must have a transverse
section thatcan ensure correctsupply to the oven.
The oven is supplied with a power cable that should only be connected to an electrical supply with 220-
240 Vac power between the phases or between the phase and neutral. Before the oven is connected to
the electricalsupply, it is important tocheck:
- The settingof the disconnector.
- Power voltageindicatedon the gauge;
WARNING
CONNECTION
The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of
the powersupply.
GB 06
1.3 Recommendations
Aftereach use of the oven,a minimum of cleaning will help keepthe oven perfectly clean.
Do not line the oven walls with aluminium foilor single-use protection available fromstores. Aluminium
foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the
enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong
smokey smells, we recommend not using the oven at very high temperature. It is better to extend the
cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,
weadvise you only use dishes and baking moulds resistant toveryhigh temperatures.
1.4 Installation
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required
to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The
installation instructions for professionally qualified personnel must be followed. Incorrect installation
may cause harm or injury to people, animals or belongings. The manufacturer cannot be held
responsiblefor such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internal parts. Make the openings specified on last pageaccording tothe type of fitting.
NOTE:As the oven could require maintenance work, it is advisable to keep another wall socket available
so that the oven can be connected to this if it is removed from the space in which it is installed. The
power cable must only be substituted by technical service staff or by technicians with equivalent
qualifications.
1.5 Waste management and environmental protection
This appliance is labelled in accordance with European Directive 2012/19/EU regarding
electric and electronic appliances (WEEE). The WEEE contain both polluting substances
(that can have a negative effect on the environment) and base elements (that can be
reused). It is important that the WEEE undergospecific treatments to correctly remove and
dispose of the pollutants and recover all the materials. Individuals can play an important
role in ensuring that the WEEE do not become an environmental problem; it is essential to
follow a fewbasic rules:
In many countries, domestic collections may be available for large WEEEs. When you buy a new
appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as
long as the appliance is of an equivalenttype and has the same functions as the purchased appliance.
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently
as possible, because heat from the cavity disperses every time it is opened. For a significant energy
saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and
use the residual heat thatthe ovencontinues to generate. Keep the seals clean and in order, toavoid any
heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed
cooking" programme makes energy saving more simple, moving the cooking process to start at the
reducedtarifftime slot.
SAVING AND RESPECTING THE ENVIRONMENT
- The WEEE should be taken to dedicated collection areas managed by the town council or a registered
company.
- The WEEE should not be treated as domestic waste;
1.6 Declaration of compliance
• By placing the mark on the appliance, we are confirming compliance to all relevant European
safety, health and environmentalrequirementswhich are applicable in legislationfor this product.
• Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address:www.candy-group.com.
GB 07
2. Product Description
2.1 Overview
2.2 Accessories (According to model)
Metal grill
1
Drip pan
2
Holds baking trays and plates.
Collects the residues that drip during the cooking
of foodson the grills.
GB 08
1. Control panel
2. Shelf positions
(lateral wire grid if included)
3. Metal grill
4. Drip pan
5. Fan (behind the steel plate)
6. Oven door
Led vision
3
-Optimum view
Is an illumination system which replaces the
traditional « light bulb ». 14 LED (for non-pyrolitic
versions) or 10 High Power LED (for pyrolitic
versions) lights are integrated within the door.
These produce white high quality illumination
which enables to view the inside of the oven with
clarity without anyshadows on all the shelves.
Advantages:
This system, besides providing excellent illumination
inside the oven, lasts longer than the traditional light
bulb its easier and to maintain and most of all saves
energy.
-Long life illumination
-Very low energy consumption, -95% in
comparison with the traditionalillumination High.
1
2
3
5
4
6
GB 09
2.3 First Use
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
PRELIMINARYCLEANING
3. Use of the Oven
3.1 Display description
Cooking
duration
Cooking
end Timer
Clock
set
Child
lock
WiFi
ON / OFF
EXTRA
The oven is switched on and off with this button.
If the oven is switched off, the display shows the clock. When
the oven is inactive, all the functions are available except the
cookingduration and end of cooking.
If the clock is not set, the oven does not work: the display
flashes, showing "12:00" and the only functioning key is
Extra.From the Extrakey, the followingfunctions can be set:
Lateral wire grids
4
It located at both sides of the oven cavity. It holds
metalgrills and drip pans.
GB 10
FUNCTION HOW TO ACTIVATE
HOW TO
DEACTIVATE
WHAT IT DOES WHY IT IS NEEDED
COOKING
DURATION
“-” keys, confirming by
been inserted, otherwise
NB: can only be set with an
activecookingprogramme.
PressEXTRAtwiceand set
the time using the “+” and
pressing"SELECT".
The displayshows“00:00”
if no cooking durationhas
the displayshowsthetime
remaining.
cooking time as required
duration, reset the display
•To modify cooking before
the set time, press EXTRA
twice and regulate the
using the “<” and “>”
keys, before pressing
SELECT" once more.
•To cancel the cooking
to “00:00”.
When a cooking programme
terminates , the oven
switches off while the display
shows "END" (the cooking
programme icon remains on)
until the On/Off button, the
only functioning key, is
pressed. When a c o o k i n g p
r o g r amme terminates, an
alarm will sound.
When the cooking time has
finished,theoven
automatically switches off
and the alarm sounds for a
fewseconds.
NB: can only be set with an
active cooking programme.
Press EXTRA enough times
to illuminate the icon, set
the end of cooking time
using the “<” and “>” keys
and confirm by pressing
"SELECT".
Press EXTRA enough times
to illuminate the icon, set
the end of cooking time
using the “<” and “>” keys
and confirm by pressing
"SELECT".
The cooking duration is
automatically calculated.
END OF
COOKING
•If a cooking programme is set,
by pressing the “<” and “>” keys
you can see and modify the
temperature set: at the first t o
uch,theoperating
temperature is shown while
another touch will allow you to
modify said temperature.
•If a cooking programme is set,
it will be lost if the "F" key is
pressed.
•This function is also used for
cooking that can be scheduled
in advance.
•If delayed cooking is set, the
oven switches off and the
display shows the current time
while the cooking programme,
cooking duration and end of
cookingiconsareilluminated.
To modify the end of
cooking before the set
time, press EXTRA enough
times to illuminate the
icon, regulate the end of
cooking time as required
using the “<” and “>” keys
and confirm by pressing
"SELECT".
To cancel the end of
cooking time, reset the
displayto“00:00”.
TIMER
by pressing"SELECT".
•To modify the timer, press
EXTRA enough times to
as required using the “<”
and “>” keysandconfirm
illuminate the icon,
regulate the cookingtime
•This function activatesan
You can select a time
between00:00and 23:59.
not switchthe ovenoff).
alarm that sounds for a few
secondswhen the set time
expires(thisfunctiondoes
Press EXTRA enough times
to illuminate the icon and
use the “<” and “>” keys to
set the time, confirming by
pressingSELECT.
The display shows
“00:00” if no time has been
inserted or the time
remaining if this has
alreadybeenset.
The timer functions
regardless of whether the
ovenisswitchedon.
SETTING
THE CLOCK
•The alarm functions
regardless of whether the
oven is switched on.
•Switched on for the first
time, the display
illuminates and sh
ows
"12:00".
•To modify the time, press
EXTRA enough times to
illuminate the icon and use
the “<” and “>” keys to set
the time, confirming it by
pressing SELECT.
•It allows you to set the
time that appears on the
display.
•This function is useful
when there are children in
the house.
•Press the EXTRA key
enough times to illuminate
the icon and then either
the “<” or “>” key to
activate this function: the
display will show ON; to
confirm press SELECT.
•Press the EXTRA key
enough times to illuminate
the icon and then either
the “<” or “>” key to
deactivate this function:
the display will show OFF;
to confirm press SELECT.
•If the function is active
only the "Extra" button, to
deactivate the function,
and "On/Off" button can
be used.
CHILD
SAFETY
LOCK
When a cooking
programme terminates,
the oven switches off while
the display shows "END"
(the cooking programme
icon remains on) until the
On/Off button, the only
functioning key, ispressed.
When a cooking
programme terminates, an
alarm will sound.
GB 11
- Iconis permanently lit: the oven is connected to your Wi-Fi router.
- On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking
functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You
can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can
only be switched on via the app.
- Iconnot lit: Wi-Fi is off.
- Off: Wi-Fi is off; the oven is not controllablevia the app.
- The icon blinks 1 second on and3 seconds off: theoven is in read only mode.
Pressing"Extra"on the timer displayallows you to select the Wi-
Fi menu.In the Wi-Fi menu if you pressthe "< >" buttons you canselect:
If Wi-Fi is not configuredit is onlypossible to choose between offand reset.
To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by
pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5
minutesto completethe enrolment process.
- Iconblinks 1 second on an 1 second off:the oven is accessible to your Wi-Fi networkand ready to be enrolled.
If the enrolmenthas not been successful,the Wi-Fi iconwill switch off after5 minutes.
When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by
the user.
- Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled
before thisis possible.
Wi-Fi Enrolment:
Wi-Fi icon
- Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to
reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5
minutes to complete the enrolment process. During this process the cooking functions, recipes and
temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".
You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it
can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and
then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset
procedure automatically.
- The icon blinks 3 seconds on and 1 second off:the ovenis trying toconnect to your Wi-Fi router.
WiFi (depends on the oven model)
Grill
Oven box
Turnspit
Circular
heating element
Bottom heating element
Fan
Defost
Pyro
LANGUAGE SETTING The language can be set when
the oven is switched off by pressing the Extra and Select
buttonssimultaneously and for3". The current language is
shown on the display and can be changed by pressing the
“<” or “>” keys, confirming it by pressing SELECT. Available
languagesare: Italian, English, Frenchand German.
SELECT Any selection must be confirmed. If not
confirmed within 15 seconds, the selection is cancelled.
Bychanging menu, any unconfirmedselection is lost.
“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still
hot, the displayshows the currenttime alternatingwith the message “HOT” at 3 intervals.
For detailed information about HOW TO CONNECT your simply-Fi appliance and
HOW TO USE it at its best, go to or visit the dedicatedhttp://www.candysimplyfi.com
CANDY SIMPLY-FI:
simply-Fi Customer Service website http://simplyfiservice.candy-hoover.com
Wi-Fi Parameters & Product Information for Networked Equipment
Technology
Standard
Frequency Band(s) [MHz]
Maximum Power [mW]
Wi-Fi
IEEE 802.11b/g/n
2412÷2484
41.4
Product information for networked equipment
How to activate wirelessnetworkport:
standby if all wired network ports are connected
Power consumption of the product in networked
andall wirelessnetwork ports areactivated:
How to deactivate wirelessnetworkport:
2,0 W
If the oven is already enrolled : press “Extra” on the
timer display and select the Wi-Fi menu then press
the “<>” buttons, select On and press the select
button.
Ifthe wifi iconis on orblinks the wifimodule is on
If the oven is not enrolled : follow procedure for
enrolling
Ifthe wifi iconis off thewifi module isoff
To switch off the wifi press “Extra” on the timer
display and select the Wi-Fi menu then press the
“<>”buttons,select Off andpressthe select button.
GB 12
GB 13
T °C
default
180
220
210
210
40
T °C
range
40 ÷ 40
50 ÷ 240
50 ÷ 280
50 ÷ 230
50 ÷ 240
Function
Dial
Function (Depends on the oven model)
LAMP: Turns on the oven light.
Allow about tenminutes extra when cookingfoodsat the same time.
CHALEUR PULSÉE: We recommend you use this method for poultry, pastries,
fish and vegetables. Heat penetrates into the food better and both the cooking
and preheating times are reduced. You can cook different foods at the same
time with or without the same preparation in one or more positions. This
cookingmethod giveseven heat distributionand the smells arenot mixed.
CONVENTIONAL : Both top and bottom heating elements are used. Preheat
the oven for about ten minutes. This method is ideal for all traditional roasting
and baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil
wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf in
mid position.
DEFROST: When the dial is set to this position. The fan circulates air at room
temperature around the frozen food so that it defrosts in a fewminutes without
the proteincontentof the foodbeing changed or altered.
*Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.
3.2 Cooking Modes
BOTTOM HEATING + FAN: The bottom heating element is used with the fan
circulatingthe air inside the oven. This method is ideal for juicy fruit flans, tarts,
quiches and pâté.
It prevents food from drying and encourages rising in cakes, bread dough and
other bottom-cooked food.
Place the shelf in the bottomposition.
L3
L1 ÷ L5
GRILL: Use the grill with the door closed.
Grill: 2140 W Barbecue: 3340 W
The top heatingelement is used alone and youcan adjust the temperature. Five
minutes preheating is required to get the elements red-hot. Success is
guaranteed for grills, kebabs and gratin dishes. White meats should be put at a
distance from the grill; the cooking time is longer, but the meat will be tastier.
You can put red meats and fish fillets on the shelf with the drip tray underneath.
The oven hastwo grill positions:
200 150 ÷ 220
GRILL + FAN: Use the turbo-grillwith the door closed.
The top heating element is used with the fan circulating the air inside the oven.
Preheating is necessary forred meats but not for white meats. Ideal for cooking
thick fooditems, whole pieces such as roast pork, poultry, etc. Place the food to
be grilled directly on the shelf centrally, at the middle level. Slide the drip tray
under the shelf to collect the juices. Make sure that the food is not too close to
the grill. Turn the food overhalfwaythroughcooking.
BOTTOM HEATING: Using the lower element. Ideal for cooking all pastry based
dishes. Use this for flans, quiches, tarts, pate and any cooking that needs more
heatfrom below.
210 50 ÷ 230
*
*
GB 14
4. Oven cleaning and maintenance
4.1 General notes on cleaning
The lifecycle of the appliance can be extendedthrough regularcleaning. Waitforthe ovento cool before
carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for
cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based
detergents (ammonia).
GLASS PARTS
If dirty, the seal canbe cleanedwith a slightly damp sponge.
ACCESSORIES
DRIP PAN
After using the grill, remove the pan from the oven. Pourthe hot fatinto a container and wash the pan in
hot water, using a spongeand washing-up liquid.
OVENWINDOW SEAL
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive
detergents.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan
in the dishwasheror use a commercial ovendetergent. Never put a dirty pan back intothe oven.
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To
remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse
with water.
4.2 Self-cleaning oven with catalytic
Special self-cleaning panels covered in a micro-porous coating are available as optional extras for all
models. If they arefitted,the ovenno longer needs to be cleaned byhand.
It is a good idea to use deep roasting trays to roast fatty foods such as joints of meat etc. and to put a tray
underneath the grill to catch surplus fat.If the walls of the oven are so thickly coated in grease that the
catalytic lining is no longer effective remove surplus grease with a soft cloth or sponge soaked in hot
water.
The fat that is splattered onto the sides of the oven during roasting is eliminated by the microporous
coatingwhich breaksthe fat downby catalysisand transforms it intogas.
Excessive splattering may nevertheless block the pores and therefore hinder self-cleaning. The self-
cleaning capacity may be restored by switching on the empty oven to maximum for about 10-20
minutes.
Do not use abrasive products, metal cleaning wads, sharp objects, rough cloths, or chemical products
and detergents thatmay permanently damagethe catalyticlining.
The lining mustbe porous forself-cleaning to be effective.
N.B.: All catalytic linings currently on the market have a working life of about 300 hours. They should
thereforebe replaced afterabout 300 hours.
4.3 Maintenance
REMOVINGAND CLEANING WIRE RACKS
1. Remove the wire racks by pulling them in the direction of the arrows (see below)
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
REMOVAL OF THE OVEN WINDOW
3. Afterthe cleaning process installthe wire racksin reverse order.
3. Replacethe window by carrying out the procedure in reverse.
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are
dried afterwards.
GB 15
On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the
left-handlateralhinge. In this way, the printed labelof the first glass will be inside the door.
1. Open the ovendoor.
2.3.4. Lock the hinges, remove the screwsand remove the upper metalcover bypullingit upwards.
REMOVAL AND CLEANING OF THE GLASS DOOR
5.6. Removethe glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the
secondand third glass (if present)).
7. Atthe end of cleaning or substitution, reassemblethe parts in reverse order.
GB 16
5. Troubleshooting
5.1 FAQ
PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up
The clock is not set Set the clock
The child lock is on
A cooking function and
temperature has not been set
Deactivate the child lock
Ensure that the necessary
settings are correct
The oven does not heat up
The oven does not heat up
GB 17
Steam and condensation on
the user interface panel
Clean with a microfiber
cloth the user interface
panel to remove the
condensation layer
No reaction of the touch
user interface
FR 18
Conseils De Securite
• Le nettoyage et l’entretien ne doivent pas être effectués par des enfants
sans surveillance.
Lappareil peut être utilisé par des enfants de plus de 8 ans et par des
personnes dont les capacités physiques, sensorielles ou mentales sont
limitées, sans expérience ni connaissance du produit, uniquement s’ils
sont surveillés ou s’ils ont été informés de la manière d’utiliser l’appareil,
en toute sécurité et qu’ils comprennent les risques possibles.
• AVERTISSEMENT : Les parties accessibles peuvent devenir très chaudes
quand le grill est en marche. Les enfants doivent être tenus à une distance
de sécurité.
• Les enfants de moins de 8 ans doivent rester à une distance de sécurité
de l’appareil s’ils ne sont pas surveillés en permanence.
Pendant la cuisson, de l’humidité peut se condenser à l’intérieur de la
cavité ou sur la vitre de la porte. Il s’agit d’un phénomène normal. Pour
réduire cet effet, attendez 10-15 minutes après avoir allumé l’appareil
avant de mettre les aliments au four. La condensation disparaîtra de toutes
façons dès que le four aura atteint la température de cuisson.
• Cuisez les légumes dans un récipient avec couvercle plutôt que dans un
ustensile ouvert.
• Évitez de laisser des aliments à l’intérieur du four plus de 15-20 minutes
après cuisson.
AVERTISSEMENT : Lappareil et ses parties accessibles chauffent pendant
l’utilisation.
Faites attention à ne pas toucher les parties chaudes.
AVERTISSEMENT : Vérifiez que l’appareil est éteint avant de remplacer
l’ampoule, pour éviter le risque de chocs électriques.
AVERTISSEMENT : Afin d’éviter tout risque lié à la réinitialisation
accidentelle de l’interrupteur thermique, l’appareil ne doit pas être
alimenté par un dispositif de commutation externe, tel qu’une minuterie,
ou relié à un circuit régulièrement allumé et éteint.
Les enfants ne doivent pas jouer avec l’appareil.
FR 19
La fiche du câble d’alimentation et la prise d’alimentation doivent être
conformes aux normes en vigueur dans le pays d’installation.
Le conducteur jaune et vert de mise à la terre ne doit pas être bloqué par
le disjoncteur. La prise d’alimentation ou le disjoncteur multipolaire utilisé
pour le branchement doit rester à tout moment accessible après
installation de l’appareil.
Le câble d’alimentation requis est le H05V2V2-F.
Il est possible de brancher l’appareil à la prise d’alimentation en installant
entre l’appareil et la prise d’alimentation un disjoncteur multipolaire qui
supporte la charge électrique maximale, conformément aux lois en
vigueur.
Le débranchement doit se faire à l’aide soit de la prise d’alimentation,
soit d’un interrupteur installé sur le circuit électrique fixe, conformément
aux normes électriques.
Utilisez uniquement la sonde à viande recommandée pour ce four.
Si le câble d’alimentation est endommagé, il doit être remplacé par un
câble ou un faisceau de câbles spécial disponible auprès du fabricant ou du
service après-vente.
N’utilisez pas un nettoyeur à vapeur pour le nettoyage.
Coupez le four avant de retirer les pièces amovibles.
Après le nettoyage, remontez-les selon les instructions.
N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs
métalliques acérés pour nettoyer les vitres des portes des fours, car cela
pourrait rayer la surface et provoquer la rupture de la vitre.
Branchez le câble d’alimentation sur une prise de courant qui supporte le
voltage (le courant et la charge sont indiqués sur l’étiquette) et vérifiez la
présence d’une mise à la terre. La prise d’alimentation doit supporter la
charge indiquée sur l’étiquette et être dotée d’une mise à la terre en état
de fonctionnement. Le conducteur de mise à la terre est jaune et vert.
Cette opération doit être exécutée par le personnel qualifié. En cas
d’incompatibilité entre la prise d’alimentation et la fiche du câble de
l’appareil, demandez à un électricien professionnel de remplacer la prise
d’alimentation par un dispositif compatible.
Éliminez les éclaboussures importantes avant de procéder au nettoyage.
Cette opération doit être exécutée par le personnel qualifié. Le
conducteur de mise à la terre (jaune et vert) doit être environ 10 mm plus
long que les autres conducteurs. Pour toutes réparations, contactez le
service après-vente en insistant sur l’utilisation de pièces de rechange
d’origine.
AVERTISSEMENT : Ne recouvrez pas les parois du four avec du papier
aluminium ou une protection jetable disponible dans les magasins. Le
papier d’aluminium ou toute autre protection, en contact direct avec
l’émail chaud, risque de fondre et de détériorer l’émail de la cavité
intérieure.
• Aucune autre opération ni aucun autre réglage ne sont requis pour faire
fonctionner l’appareil aux fréquences nominales.
Le non-respect des consignes ci-dessus peut compromettre la sécurité
de l’appareil et annuler la garantie.
Une coupure de courant prolongée durant une phase de cuisson peut
engendrer un dysfonctionnement de l’écran. Dans ce cas, veuillez
contacter le service après-vente.
Lappareil ne doit pas être installé derrière une porte décorative, pour
éviter la surchauffe.
Pour introduire la grille dans le four, vérifiez que le butoir est dirigé vers le
haut et au fond de la cavité. La grille doit être complètement insérée dans
la cavité.
PRUDENCE : Ne remplissez pas le fond de la cavité avec de l’eau pendant
la cuisson ou lorsque le four est chaud.
AVERTISSEMENT : N’enlevez jamais le joint de la porte du four.
FR 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148

Candy FCE 848 VX WF/E Manuel utilisateur

Catégorie
Micro-ondes
Taper
Manuel utilisateur