ROSIERES RFAZ8573IN RC Manuel utilisateur

Marque: ROSIERES

Modèle: RFAZ8573IN RC

Catégorie: Fours

Taper: Manuel utilisateur

PROPERTY OF

CL N° REV. DATE

SPECIFICATION

1/1

MODIFY DESCRIPTION

MODIFIED BY

BASE CODE

TREATMENT

MATERIAL

DATE SIGNATURE

DRAWN

CHECKED

FOR

WEIGHT SCALE

SIZE

NAME

(LOCAL LANGUAGE)

PART CODE

SHEET

REPLACE No ORIGIN CL No Class Specification

RELEASE LEVEL

WITHOUT OUR WRITTEN CONSENT IS FORBIDDEN

OF EU DIRECTIVE 2002/95/CE + AMENDMENTS

MATERIALS IN COMPLIANCE WITH REQUIREMENTS

------------

29.01.2019

KULLANMA KILAVUZU R HOFTE03

XXXXX

29.01.2019

USER MANUAL R HOFTE03

ROSIERES OVEN

GENERAL TOLERANCE

ISO 2768 - m

SC 000-000

PRODUCTION RELEASED

------------

42828478

70 gr/m

PAPER TECHNICAL DATA SHEET / KAĞIT MALZEMESİ

55013

03.05.19 Logo revize edildi./Logo has been revised. Y.GÜLTÜRK

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

USINES DE ROSIÈRES - 30, rue Y. LACELLE - Rosières - 18400 - Lunery - France





Safety Indications

EN 02

•Children under 8 must be kept at a safe distance from the appliance if

not continuously supervised.

•Do not use rough or abrasive materials or sharp metal scrapers to clean

the oven door glasses, as they can scratch the surface and cause the glass

toshatter.

• During cooking, moisturemay condense inside the oven cavity or on the

glass of the door. This is a normal condition. To reduce this effect, wait 10-

15 minutes after turning on the power before putting food inside the

oven. In any case, the condensation disappears when the oven reaches

the cooking temperature.

• Cook the vegetables in a container with a lid insteadof an open tray.

• Avoid leaving food inside the oven after cooking for more than 15/20

minutes.

• WARNING: the appliance and accessible parts become hot during use.

Be careful not to touch any hot parts.

•WARNING: the accessible parts can become hot when the oven is in use.

Childrenmust be kept ata safe distance.

- Clean the ovendoor;

- Remove all accessories and the sliding rackkit (where present);

- Do not place teatowels

•WARNING: before initiating the automatic cleaning cycle:

• In ovens with meat probe it is necessary, before making the cleaning

cycle, close the hole with the nut provided. Always close the hole with the

nut when the meat probeis not used.

- Remove large or coarse food residues from the inside of the oven using a

damp sponge. Do not use detergents;

•WARNING: ensure that the appliance is switched off before replacing

the bulb, to avoid the possibility of electric shocks.

•Children must not play with the appliance. The appliance can be used by

those aged 8 or over and by those with limited physical, sensorial or

mental capacities, without experience or knowledge of the product, only

if supervised or provided with instruction as to the operation of the

appliance, in a safe way with awarenessof the possible risks.

•Cleaning and maintenance should not be carried out by unsupervised

children.

•The oven must be switched off before removing the removable parts

and, after cleaning, reassemble them accordingthe instructions.

•Only use the meat probe recommendedfor this oven.

EN 03

•Do not use a steam cleaner for cleaning operations.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The

socket must be suitable for the load indicated on the tag and must be

having the earth contact connected and in operation. The earth

conductor is yellow-green in colour. This operation should be carried out

by a suitablyqualified professional. In case of incompatibility between the

socket and the appliance plug, ask a qualified electrician to substitute the

socket with another suitable type. The plug and the socket must be

conformed tothe current norms of the installation country. Connection to

the power source can also be made by placing an omnipolar breaker

between the appliance and the power source that can bear the maximum

connected load and that is in line with current legislation. The yellow-

green earth cable should not be interrupted by the breaker. The socket or

omnipolar breaker used for the connection should be easily accessible

when the appliance is installed.

•The disconnection may be achieved by having the plug accessible or by

incorporating a switch in the fixed wiring in accordance with the wiring

rules.

•If the power cable is damaged, it must be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department.

•The type of powercable must be H05V2V2-F.

•During the pyrolytic cleaning process, surfaces can heat up more than

usual, children must therefore be kept at a safe distance.

The shelf must be inserted completely into the cavity

•WARNING: Do not line the oven walls with aluminum foil or single-use

protection available from stores. Aluminum foil or anyother protection, in

direct contact with the hot enamel, risk melting and deteriorating the

enamel of the insides.

•The appliance must not be installed behind a decorative door in order to

avoid overheating.

•When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity.

•WARNING: Never remove the ovendoor seal.

•Failure to comply with the above can compromise the safety of the

appliance and invalidate the guarantee.

•Any excess of spilled material should be removedbefore cleaning.

• No additional operation/setting is required in order to operate the appliance

at the rated frequencies.

Summary

EN 04

General Instructions

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

3.1 Display description

3.2 Cooking modes

Use of the Oven

4.1 General notes on cleaning

4.2 Pyrolysis

4.3 Maintenance

• Removal of the oven window

• Changing the bulb

• Removal and cleaning of the glass

door

Oven Cleaning and Maintenance

5.1 F.A.Q.

Troubleshooting

1. General Instructions

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructions contained in this document are not observed.

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the

model you havepurchased.

1.1 Safety Indications

- do not touchthe appliance with wet or damp hands or feet;

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsible foranydamageresultingfrom improper, incorrect or unreasonable usage.

- do not pull on the power cable to disconnect the plug fromthesocket;

The use of anyelectricalapplianceimplies the observance of some fundamental rules:

- in case of malfunction and/orpoor operation,switch offtheappliance and do nottamperwith it.

- in general the use of adaptors, multiplesockets and extensioncablesis not recommended;

1.2 Electrical Safety

- the setting of the disconnector.

WARNING

- power voltageindicatedon the gauge;

Before connecting the oven to the powersupply, ask a qualified electrician to check the continuityof the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the power supply.

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufactureracceptsno responsibility forany damage caused by the failuretoobserve

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section that can ensure correctsupplytothe oven.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is

connectedtotheelectricalsupply, it is important to check:

EN 05

1.3 Recommendations

Do not line the oven walls with aluminium foil or single-use protectionavailable from stores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

weadvise you only use dishes and baking moulds resistant toveryhigh temperatures.

Aftereach use of the oven,a minimum of cleaning will help keepthe ovenperfectly clean.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsiblefor such harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internalparts. Make the openings specified on last page accordingtothe type of fitting.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as the applianceis of an equivalent type and has the same functions as the purchasedappliance.

- the WEEE should not be treatedas domestic waste;

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). It is importantthat the WEEE undergo specific treatments to correctly removeand

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a fewbasic rules:

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residual heat that the ovencontinues togenerate.Keeptheseals clean and in order, toavoid any

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reducedtariff time slot.

- the WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

SAVING AND RESPECTINGTHE ENVIRONMENT

1.6 Declaration of compliance

The parts of this appliance thatmaycomeinto contactwith foodstuffs comply with the provisionsof EEC

Directive89/109.

By placing the mark on this product,we are confirming compliance to all relevant European safety,

health and environmental requirementswhich areapplicablein legislation forthisproduct.

EN 06

2. Product Description

2.1 Overview

2.2 Accessories (According to model)

Metal grill

Drip pan

Holds baking trays and plates.

Collects the residues that drip during the cooking

of foodson the grills.

EN 07

No pre-heating is required for rotisserie cooking.

Cooking with the door closed. The energy

consumption is 90-95% less than traditional

system. When the oven is in use, any unused

accessories should be removed from the oven.

•Unscrewthe hooks

•Putthe spit into the meat

•Fix the meat with the hooks

•Tightenthe screws

•Insert the spit into the motor hole

•Demountthe handle before tostart cooking.

Turnspit

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Turnspit

4. Metal grill

5. Drip pan

6. Fan (behind the steel plate)

7. Meat probe

8. Oven door

9. Separator

Meat-probe

-Prepare the food and properly insert the meat

probe into the food. Do not preheat or start cooking

before properly inserting the meat probe. Probe

should be inserted into the food and receptacle

while the oven is still cool.

Measures the internal temperature of food during

cooking. Insert the meat-probe into the hole on the

topof the cavity.

-Donotinsert the meat probeinthefrozen food.

-Do not leave the meat probe inside the oven when

it's not used: it could damage.

Led vision

This system, besides providing excellent

illumination inside the oven, lasts longer than the

traditionallightbulb its easier and to maintain and

mostof all saves energy.

-Optimum view

Advantages :

Is an illumination system which replaces the

traditional « light bulb ». 14 LED (for non-pyrolitic

versions) or 10 High Power LED (for pyrolitic

versions) lights are integrated within the door.

These produce white high quality illumination

which enables to view the inside of the oven with

clarity without any shadows on all the shelves.

-Long lifeillumination

-Very low energy consumption, -95% in comparison

with the traditional illumination High.

Our technology and experience have brought a

feature typical of professional kitchens into the home.

A Multijet lateral ventilation system emit microflows of

hot air directly onto the food, at low speeds,

enveloping it completely.

This enables uniform cooking, reduced loss of food

moisture and simultaneous cooking on different levels.

Never leave the separator inside the oven when

the Pyrolyticmodeis on.

The separator divides oven into two cavities. It

separates upper and lower cavity when you want

to use oven in dual mode. It must be used in third

shelf.

Pro/Exp'r Technology

Separator

EN 08

2.3 First Use

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

PRELIMINARYCLEANING

EN 09

3. Use of the Oven

3.1 Display description (full touch double cavıty)

1. On/Off

2. Extra Functions

3. Arrow (-)

4. Select/Stop

5. Arrow (+)

6. Cavity

7. Cooking functions

3 4

When you select a cavity, you need to set the desired cooking function by pressing the F key and

then press SELECT to confirm the choice.

It is now possible to set the cooking temperature by pressing the " <" and ">" keys, confirming your

selection by pressing SELECT. Following this procedure the oven starts to cook.

ON/OFF: The oven is switched on and off with this button

EXTRA: If the ovenisswitchedoff, the display showsthe clock. When theovenis inactive, all

If you want to use the oven as a single cavity one, you have to remove the separator.

Press F to select the desired cooking function and confirm by pressing SELECT. Set the temperature

by pressing the "<" and ">" keys and confirm the selection by pressing SELECT. Following this

procedure the oven starts to cook.

NOTE: when a cavity is selected, all the information relating to cooking functions, temperature and

time refer to the cavity that was selected previously.

the functions are availableexcept the cookingduration and end of cooking.

If the clock is not set, the ovendoes not work: the display flashes, showing "12:00"

and the only functioningkey isExtra.From the Extra key, the followingfunctionscanbe set:

CAVITY: When the separator is placed inside the oven, you can select the lower or upper cavity by

pressing the button.

EN 10

FUNCTION HOW TO ACTIVATE

HOW TO

DEACTIVATE

WHAT IT DOES WHY IT IS NEEDED

COOKING

DURATION

NB: can only be set with an

activecooking programme.

the timeusing the “+”and

“-” keys, confirmingby

pressing"SELECT".

The display shows “00:00”

if no cooking durationhas

been inserted, otherwise

the display shows the time

remaining.

PressEXTRA twice and set

•To modify cooking before

twice and regulate the

cooking time as required

•To cancel the cooking

duration, reset the display

to “00:00”.

the set time, press EXTRA

using the “<” and “>”

keys, before pressing

SELECT" once more.

When a cooking programme

terminates , the oven

switches off while the display

shows "END" (the cooking

programme icon remains on)

until the On/Off button, the

only functioning key, is

pressed. When a c o o k i n g p

r o g r amme terminates, an

alarm will sound.

When the cooking time has

finished,theoven

automatically switches off

and the alarm sounds for a

fewseconds.

NB: can only be set with an

active cooking programme.

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

The cooking duration is

automatically calculated.

END OF

COOKING

•This function is also used for

cooking that can be scheduled

in advance.

•If a cooking programme is set,

it will be lost if the "F" key is

pressed.

•If delayed cooking is set, the

oven switches off and the

display shows the current time

while the cooking programme,

cooking duration and end of

cookingicons are illuminated.

•If a cooking programme is set,

by pressing the “<” and “>” keys

you can see and modify the

temperature set: at the first t o

uch,theoperating

temperature is shown while

another touch will allow you to

modify said temperature.

To modify the end of

cooking before the set

time, press EXTRA enough

times to illuminate the

icon, regulate the end of

cooking time as required

using the “<” and “>” keys

and confirm by pressing

"SELECT".

To cancel the end of

cooking time, reset the

displayto “00:00”.

TIMER

•To modify the timer, press

EXTRA enough times to

by pressing "SELECT".

as required using the “<”

and “>” keys and confirm

illuminate the icon,

regulate the cookingtime

alarm that sounds for a few

secondswhen the set time

You can select a time

between00:00 and 23:59.

not switch the oven off).

expires(this function does

•This function activates an

Press EXTRA enough times

to illuminate the icon and

use the “<” and “>” keys to

set the time, confirming by

pressingSELECT.

• The display shows

“00:00” if no time has been

inserted or the time

remaining if this has

alreadybeen set.

• The timer functions

regardless of whether the

ovenis switched on.

SETTING

THE CLOCK

•The alarm functions

regardless of whether the

oven is switched on.

•Switched on for the ﬁrst

time, the display

illuminates and sh

ows

"12:00".

•To modify the time, press

EXTRA enough times to

illuminate the icon and use

the “<” and “>” keys to set

the time, conﬁrming it by

pressing SELECT.

•It allows you to set the

time that appears on the

display.

•This function is useful

when there are children in

the house.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

activate this function: the

display will show ON; to

conﬁrm press SELECT.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

deactivate this function:

the display will show OFF;

to conﬁrm press SELECT.

•If the function is active

only the "Extra" button, to

deactivate the function,

and "On/Off" button can

be used.

CHILD

SAFETY

LOCK

When a cooking

programme terminates,

the oven switches off while

the display shows "END"

(the cooking programme

icon remains on) until the

On/Off button, the only

functioning key, is pressed.

When a cooking

programme terminates, an

alarm will sound.

MEAT PROBE

RECOMMENDED TEMPERATURES

Meat

Rare

Medium rare

Medium

Well done

Salmon

Chicken

min 68

When the temperature is confirmed, by pressing "Select", the display shows “ 40°”: it is now possible

to select the meat probe target temperature, between 30°C and 90°C at 1°C intervals. When the meat

probe temperature is confirmed, press the "Select" key and the display shows “” followed by the

actual temperature taken by the meat probe (1 degree intervals). As soon as the meat probe reaches

the set temperature, the cooking programme terminates. If a cooking programme is set with the meat

probe, by pressing the keys you can see and modify the temperature of the meat probe: at

the first touch of one of the two keys, the display shows the meat probe target temperature, while at the

nexttouchyou can change the selectedtemperature of the probe.

"<" and ">"

If the user changes the cooking programme, the meat probe temperature setting is reset. Repeat the

setting sequence to select a new target temperature. The meat probe cannot be used with pre-set

cooking or with the separating plate (if present) inside the oven: in this case the display shows“ NO”

and will not execute any command until the meat probe is removed. Defrost, grill, any program with

turnspit, pyrolysis and any programmed cooking are not allowed with the meat probe (they are not

shown on the menu).

MEAT PROBE (depends on the oven model) If the meat probe is identified, the display shows

"PROBE". When a cooking programme is selected, the display shows the default temperature but is

neverhigher than 200°C: the selectabletemperature is also limited to 200°C.

SELECT: Any selection must be confirmed. If not confirmed within 15 seconds, the selection is

cancelled.By changing menu, any unconfirmed selection is lost.

“HOT” ICON: When a cooking programme finishes or when the oven switches off, if the oven is still hot,

the displayshowsthe currenttime alternating with the message“HOT” .

LANGUAGE SETTING: The language can be set when the oven is switched off by pressing the Extra and

Select buttons simultaneously and for 3". The current language is shown on the display and can be

changed by pressing the “<” or “>” keys, confirming it by pressing SELECT. Available languages are:

Italian,English, Frenchand German.

EN 11

3.2 Cooking Modes

EN 12

The cooking methods suggested are set out in the table below. A temperature is also suggested for each

cookingmethod. This canbe modified within a pre-determined range.

SINGLE MODE

To use the Single Mode, removethe seperatorfrom the oven.

You can choose all the functions below with Single Mode.

*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.

220

210

180

210

200

220

ECO

Off

Bottom+Fans

Bottom+Top

+Fans

Circular Heating

Element +Fans

Grill

Grill+Fans

Grill+Turnspit

Defrost

Pyro

Pre-set

tempe-

rature °C

Function Dial

Function

(Depends on to the oven model)

Grill+Turnspit

+Fans

ECO: 90min

SUPER: 120min

Both top and bottom heating elements are in use. This method is ideal for all

traditional roasting and baking.When cooking red meat, roast beef, leg of lamb,

game,breador foilwrappedfoods.

Both top and bottom heating elements are used in conjunction with the fan, which

circulates hot air throughout the oven.We recommend this method for poultry,

pastries, fish and vegetables. By using this method better heat penetration is

achieved and cooking and preheating times are also reduced. The fan cooking

option allows you to cook different foods together at different positions in the oven

all at the same time, providing even heat distribution but without the risk of

mingling tastes and smells. When cooking different foods at the same time allow a

further 10 minutes.

Air that has been heated is blown by the fan onto the different levels. It is ideal for

cooking different types of food at the same time (e.g. meat and fish) without mixing

tastes and smell. It cooks very gently and is ideal for sponge cakes, pasties, etc.

The combinationof the bottom heating element and fanis ideal for fruit flans, tarts,

quiches and pastries. It prevents food from becoming too dry and encourages

breaddough to rise. Place the shelf in the bottomposition in the oven.

Using the top heating element. Success is guaranteed for mixed grills, kebabs and

gratin dishes. The grill should be pre-heated to a high temperature for 5 minutes.

White meats should always beplaced at some distance from the grill element, the

cooking time is slightly longer but the meat will be more succulent. Red meat and

fish fillets can be placed directly onto the shelf with the drip tray placed beneath on

lowershelf position.

The top heating element is used in conjunction with the fan which circulates the

hot air around the oven. Pre heating is recommended for red meats but is not

necessary for white meats. Grilling is ideal for cooking thicker food items such as

pork or poultry. Food to be grilled should be placed directly at the centre of the

middle shelf. By sliding the drip tray underneath the shelf it will ensure that any

juices are collected. For best results always make sure that the food is not too close

tothe grill element and turn the food over half way through the cooking time.

Use the turnspit with the door closed.

The top heating element is used with the turnspit rotating the food to be cooked.

The heating temperature can be adjusted as required. The turnspit is best used

for medium-sized items.

Ideal for rediscovering the taste of traditional roast. No preheating is required for

turnspit cooking.

The advantage of using the top oven element at the same time as the fan and

rotisserie is that the food is evenly cooked, preventing it from becoming dry and

tasteless. The rotisserie is programmed to continue rotating for approximately five

minutes after cooking, making full use of the residual oven heat.No preheating is

requiredfor rotisserie cooking.

PYROLYSIS

When the dial is set to this position. The fan circulateshot air around the frozen food

so that it defrosts in a few minutes without the protein content of the food being

changed or altered.

The temperatureis preset in 40°C constant, no regulation is possible.

160

Bottom

Using the lower element. Ideal forcooking all pastry based dishes. Use this for flans,

quiches, tarts, pâté and any cooking that needs moreheat from below.

Upper Cavity

Pre-set

tempe-

rature °C

Function Dial

Function

(Depends on to the oven model)

Air that has been heated is blown by the fan onto the different levels. It is ideal for

cooking different types of food at the same time (e.g. meat and fish) without mixing

tastes and smell. It cooks very gently and is ideal for sponge cakes, pasties, etc.

Circular Heating

Element +

Upper Fan

Grill

Using the top heating element. Success is guaranteed for mixed grills, kebabs and

gratin dishes. The grill should be pre-heated to a high temperature for 5 minutes.

White meats should always beplaced at some distance from the grill element, the

cooking time is slightly longer but the meat will be more succulent. Red meat and

fish fillets can be placed directly onto the shelf with the drip tray placed beneath on

lowershelf position.

The top heating element is used in conjunction with the fan which circulates the

hot air around the oven. Pre heating is recommended for red meats but is not

necessary for white meats. Grilling is ideal for cooking thicker food items such as

pork or poultry. Food to be grilled should be placed directly at the centre of the

middle shelf. By sliding the drip tray underneath the shelf it will ensure that any

juices are collected. For best results always make sure that the food is not too close

tothe grill element and turn the food over half way through the cooking time.

Grill+Fan

Lower Cavity

160

Pre-set

tempe-

rature °C

Function Dial

Function

(Depends on to the oven model)

160

Circular Heating

Element +

Lower Fan

Air that has been heated is blown by the fan onto the different levels. It is ideal for

cooking different types of food at the same time (e.g. meat and fish) without mixing

tastes and smell. It cooks very gently and is ideal for sponge cakes, pasties, etc.

Bottom

Using the lower element. Ideal forcooking all pastry based dishes. Use this for flans,

quiches, tarts, pâté and any cooking that needs more heat and radiation from

below.

The combinationof the bottom heating element and fanis ideal for fruit flans, tarts,

quiches and pastries. It prevents food from becoming too dry and encourages

breaddough to rise. Place the shelf in the bottomposition in the oven.

Bottom+

Lower Fan

EN 13

180

190

EN 14

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliance canbe extendedthrough regular cleaning. Waitfor the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

After using the grill, remove the pan from the oven. Pourthe hot fat into a container and washthe pan in

hot water, using a sponge and washing-up liquid.

DRIP PAN

ACCESSORIES

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasher or use a commercialoven detergent. Never put a dirty pan back into the oven.

If dirty, theseal can be cleaned with a slightly damp sponge.

OVENWINDOW SEAL

4.2 Pyrolysis

NOTE: If a hob has been fitted above the oven, never use the gasburnersor the electric hot-plates while

the Pyrolyser is working, this will prevent the hob from overheating.

SUPER PYROCLEAN : Cleans a heavilystained oven.Operates for a period of 120 minutes.

The oven is equipped with a pyrolyser cleaning system, which destroys food residues at high

temperature. The operation is carried out automatically by means of the programmer. The resulting

fumes are rendered “clean” by passing over a Pyrolyser wich starts as soon as cooking begins. As very

high temperatures are required by the Pyrolyser, the oven door is fitted with a safety lock. The pyrolyser

canbe stoppedatanytime. The door cannot be opened untilthe safety lock is displayed.

TWO PYROLYTIC CYCLEare pre-set:

ECOPYROCLEAN : Cleans a moderately stained oven.Operatesfor a period of 90 minutes.

•Remove all the accessories from the oven because they are not able to tolerate the high

temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and

the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat

probeit is necessary, beforemaking thecleaning cycle , close the hole with the nut provided.

•Close the oven door.

•Excessspillage must be removed beforecleaning.

•Remove any large spillages or stains as it would take too long to destroy them. Also excessively

large amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic

cycle.

• Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use

detergents.

Never use commerciallyavailable cleaning productson a Pyrolyticoven!

• Clean the ovendoor.

Tip : Carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of residual

heat,thus saving energy.

• Removeall accessories and the sliding rackkit (wherepresent).

• Do not place tea towels.

Before executing a pyrolytic cycle:

Using the Pyrolitic cycle:

If a pyrolysisis alreadystartedit is no morepossible to change from “ ECO” to “SUPER” and vice versa.

If a pyrolysis cycle is chosen the display shows“ECO”, that lasts 90 minutes, blinking; by the it

is possible to change in “SUPER” that lasts120 minutes.

"<" and ">"

It is not possibletomodify a pyrolysisduration but ending time canbe modified.

During pyrolysis the buzzer does not sound.

Pyrolysis is not available if separator or side grids or the meat probe are detected, and it is not

programmable via WiFi.

4.3 Maintenance

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

3. Replace the window by carrying out the procedure in reverse.

EN 15

2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.

1. Disconnect the oven from the mains supply.

3. Once the defective bulb is replaced,replace the glass cover.

CHANGING THE BULB

LOW-E

REMOVAL AND CLEANINGOF THE GLASS DOOR

1. Open the ovendoor.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the second and third glass (if present)).

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-handlateral hinge. Inthis way, the printedlabel of the first glass will be inside the door.

7. Atthe end of cleaningor substitution,reassemblethe parts in reverse order.

2.3.4. Lock the hinges,remove the screws and removethe upper metal coverby pulling it upwards.

EN 16

5.1 FAQ

Troubleshooting

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

EN 17

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

FR 18

Conseils De Securite

• Nous vous conseillons de faire la cuisson des légumes dans un

récipient aveccouvercle pas sur un plateau.

• Pendant la cuisson de l’humidité peut se créer dans la cavité ou sur la

surface de la porte. Le cas décrit est normal. Si on veut reduire cet effet, il

faut laisser réchauffer le four 10-15 minutes avant d’introduire les

aliments. L’humidité va disparaître grâce à la juste température de cuisson.

• Une fois que la cuisson est terminée, nous vous conseillons de ne pas

laisser les aliments à l’intérior de la cavité pour plus de 15/20 minutes.

• Utiliser seulement la sonde de température recommandée pour ce

four.

• Ne pas utiliser de nettoyants abrasifs ou de racloirs métalliques tranchants

pour nettoyer la vitre de la porte du four car ils peuvent rayer la surface,

entrainant des risques d'explosion.

• Brancher le câble d’alimentation sur une prise de courant qui supporte

le voltage ; le courant et la charge sont indiqués sur l’étiquette ; vérifier la

présence d’une mise à la terre. La prise d’alimentation doit supporter la

charge indiquée sur l’étiquetteet être dotée d’une mise à la terre en état

• ATTENTION : les parties accessibles peuvent devenir très chaudes

quand le four est en marche. Les enfants doivent être tenus à une

distance de sécurité.

• En cours d'utilisation l'appareil devient chaud. Des précautions doivent

être prises pour éviter de toucher les éléments chauds à l'intérieur du

four.

• Les enfants ne doivent jouer avecl'appareil.

•Le four doit être éteint avant d'enlever la protection et après le

nettoyage, la protection doit être replacéen respectant les instructions.

• Le nettoyage et l'entretien par l'utilisateur ne doit pas être fait par des

enfants sans surveillance.

• AVERTISSEMENT: L'appareil et les parties accessibles deviennent

chauds pendant l'utilisation. Des précautions doivent être prises pour

éviterde toucher les éléments chauffants.

• Cet appareil n'est pas destiné à être utilisé par des personnes (y

compris les enfants) dont les capacités physiques, sensorielles ou

mentales sont réduites, ou ayant un manque d'expérience et de

connaissances, à moins qu'elles n'aient été formées à l'utilisation de

l'appareil,par une personne responsablede leur sécurité.

AVERTISSEMENT: Les parties accessibles peuvent devenir chaudes

pendantl'utilisation. Les jeunes enfantsdoivent être tenusà l'écart.

• Ne pas utiliser de nettoyants vapeur pour le nettoyage.

FR 19

• Aucun réglage/opération supplémentaire n’est requis pour faire

fonctionner l’appareil aux fréquences nominales.

de fonctionnement. Le conducteur de mise à la terre est jaune et vert.

Cette opération doit être exécutée par du personnel qualifié. En cas

d’incompatibilité entre la prise d’alimentation et la fiche du câble de

l’appareil, demander à un électricien professionnel de remplacer la prise

d’alimentation par un dispositif compatible. La fiche du câble

d’alimentation et la prise d’alimentation doivent être conformes aux

normes en vigueur dans le pays d’installation. Il est possible de brancher

l’appareil à la prise d’alimentation en installant un disjoncteur multipolaire

qui supporte la charge électrique maximale, conformément aux lois en

vigueur, entre l’appareil et la prise d’alimentation. Le conducteur jaune et

vert de mise à la terre ne doit pas être bloqué par le disjoncteur. La prise

d’alimentation ou le disjoncteur multipolaire utilisé pour le branchement

doit rester à tout moment accessible lors de l’installation de l’appareil.

• En introduisant le plateau dans le four, s’assurer que le stop est dirigé

vers le haut et au fondde la cavité.

• Le débranchement doit se faire en accédant à la prise d’alimentation

ou en prévoyant un interrupteur sur le circuit électrique fixe, conforme

aux normes électriques.

• AVERTISSEMENT : Ne retirez jamais le joint de la porte du four.

• Pendant le nettoyage à pyrolyse, les surfaces peuvent devenir

beaucoup plus chaude que d’habitude, les enfants doivent donc être

tenusà une distance de sécurité.

• Le câble d’alimentation requis est le H05V2V2-F.

• Tout produit déverséen quantité doit être éliminé avant le nettoyage.

• Ne pas installer l’appareil derrière une porte décorative, pour éviter la

surchauffe.

•Le non-respect des consignes ci-dessus peut compromettre la sécurité

de l’appareilet annuler la garantie.

Le plateau doit complètement être inséré dans la cavité

• Si le câble d’alimentation est endommagé, il doit être remplacé par un

câble ou un faisceau de câbles spécial disponible auprès du fabriquant

ou en contactant le service après-vente.

• AVERTISSEMENT : Ne tapissez pas les parois du four avec du papier

aluminium ou un autre matériau de protection jetable en vente dans le

commerce. Tout papier aluminium ou autre matériau de protection qui

entrerait au contact direct de l'émail chaud risquerait de fondre et de

détériorer l'émail intérieurdu four.

La page charge ...

ROSIERES RFAZ8573IN RC Manuel utilisateur

Marque: ROSIERES

Modèle: RFAZ8573IN RC

Catégorie: Fours

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: ROSIERES RFAZ8573IN RC User manual

ROSIERES RFAZ8573IN RC Manuel utilisateur

ROSIERES RFAZ8573IN RC Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents