ROSIERES RFN7870IN/1 Manuel utilisateur

Marque: ROSIERES

Modèle: RFN7870IN/1

Catégorie: Fours

Taper: Manuel utilisateur

Ce manuel convient également à

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

USINES DE ROSIÈRES - 30, rue Y. LACELLE - Rosières - 18400 - Lunery - France

Safety Indications

EN 02

• During cooking, moisture may condense inside the oven cavity or

on the glass of the door. This is a normal condition. To reduce this

effect, wait 10-15 minutes after turning on the power before putting

food inside the oven. ln any case, the condensation disappears when

the oven reaches the cooking temperature.

• Cook the vegetables in a container with a lid instead of an open tray.

• Avoid leaving food inside the oven after cooking for more than

15/20 minutes.

• WARNING: the appliance and accessible parts become hot during

use. Be careful not to touch any hot parts.

• WARNING: the accessible parts can become hot when the grill is in

use. Children should be kept at a safe distance.

• WARNING: ensure that the appliance is switched off before

replacing the bulb, to avoid the possibility of electric shocks.

• WARNING: in order to avoid any danger caused by the accidental

resetting of the thermal interruption device, the appliance should

not be powered by an external switching device, such as a timer, or

be connected to a circuit that is regularly switched on and off.

• Children under 8 should be kept at a safe distance from the

appliance if not continuously supervised.

• Children should not play with the appliance.

• The appliance can be used by those aged 8 or over and by those

with limited physical, sensorial or mental capacities, without

experience or knowledge of the product, only if supervised or

provided with instruction as to the operation of the appliance, in a

safe way with awareness of the possible risks.

• Cleaning and maintenance should not be carried out by

unsupervised children.

• Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and

cause the glass to shatter.

• The oven must be switched off before removing the removable

parts. After cleaning, reassemble them according the instructions.

EN 03

• Only use the meat probe recommended for this oven.

• Do not use a steam cleaner for cleaning operations.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact.

The socket must be suitable for the load indicated on the tag and

must have ground contact connected and in operation. The earth

conductor is yellow-green in colour. This operation should be carried

out by a suitably qualified professional. ln case of incompatibility

between the socket and the appliance plug, ask a qualified

electrician to substitute the socket with another suitable type. The

plug and the socket must be conformed to the current norms of the

installation country. Connection to the power source can also be

made by placing an omnipolar breaker between the appliance and

the power source that can bear the maximum connected load and

that is in line with current legislation. The yellow-green earth cable

should not be interrupted by the breaker. The socket or omnipolar

breaker used for the connection should be easily accessible when the

appliance is installed.

• The disconnection may be achieved by having the plug accessible

or by incorporating a switch in the fixed wiring in accordance with the

wiring rules.

• lf the power cable is damaged, it should be substituted with a cable

or special bundle available from the manufacturer or by contacting

the customer service department. The type of power cable must be

H05V2V2-F. This operation should be carried out by a suitably

qualified professional. The earth conductor (yellow-green) must be

approximately 10 mm longer than the other conductors. For any

repairs, refer only to the Customer Care Department and request the

use of original spare parts.

• Failure to comply with the above can compromise the safety of the

appliance and invalidate the guarantee.

• Any excess of spilled material should be removed before cleaning.

• A long power supply failure during an occurring cooking phase may

cause a malfunction of the monitor. ln this case contact customer

service.

• The appliance must not be installed behind a decorative door in

order to avoid overheating.

• When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity. The shelf must be inserted

completely into the cavity.

• WARNING: Do not line the oven walls with aluminium foil or single-

use protection available from stores. Aluminium foil or any other

protection, in direct contact with the hot enamel, risk melting and

deteriorating the enamel of the insides.

• WARNING: Never remove the oven door seal.

• CAUTION: Do not refill the cavity bottom with water during cooking

or when the oven is hot.

• No additional operation/setting is required in order to operate the

appliance at the rated frequencies.

• .WARNING: before initiating the automatic cleaning cycle:

- Clean the oven door;

- Remove large or coarse food residues from the inside of the oven

using a damp sponge. Do not use detergents;

- Remove all accessories and the sliding rack kit (where present); -Do

not place tea towels.

• ln ovens with meat probe it is necessary, before making the

cleaning cycle, close the hole with the nut provided. Always close the

hole with the nut when the meat probe is not used.

• During the pyrolytic cleaning process, surfaces can heat up more

than usual, children must therefore be kept at a safe distance.

EN 04

Summary

EN 05

General Instructions

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

3.1 Display description

3.2 Cooking modes

Use of the Oven

4.1 General notes on cleaning

4.2 Pyrolysis

4.3 Maintenance

• Instruction for removal

and cleaning of the side racks

• Removal of the oven window

• Removal and cleaning of the glass

door

• Changing the bulb

Oven Cleaning and Maintenance

5.1 F.A.Q.

Troubleshooting

1. General Instructions

We thank you for choosing one of our products. For the

best results with your oven, you should read this manual

carefully and retain it for future reference. Before installing

the oven, take note of the serial number so that you can

give it to customer service staff if any repairs are required.

Having removed the oven from its packaging, check that it

has not been damaged during transportation. If you have

doubts, do not use the oven and refer to a qualified

technician for advice. Keep all of the packaging material

(plastic bags, polystyrene, nails) out of the reach of

children. When the oven is switched on for the first time,

strong smelling smoke can develop, which is caused by the

glue on the insulation panels surrounding the oven heating

for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to dissipate before

putting food in the oven. The manufacturer accepts no responsibility in cases where the instructions

contained in this document are not observed.

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the model

you have purchased.

1.1 Safety Indications

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for example as

a heat source, is considered improper and therefore dangerous. The manufacturer cannot be held

responsible for any damage resulting from improper, incorrect or unreasonable usage.

The use of any electrical appliance implies the observance of some fundamental rules:

- do not pull on the power cable to disconnect the plug from the socket;

- do not touch the appliance with wet or damp hands or feet;

- in general the use of adaptors, multiple sockets and extension cables is not recommended;

- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.

1.2 Electrical Safety

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS. The

power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe these

instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a disconnector

with multiple poles, depending on the laws in force in the country of installation. The electrical supply should

be protected with suitable fuses and the cables used must have a transverse section that can ensure correct

supply to the oven.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-240

Vac power between the phases or between the phase and neutral. Before the oven is connected to the

electrical supply, it is important to check:

- power voltage indicated on the gauge;

- the setting of the disconnector.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of the

power supply.

WARNING

Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so

that the oven can be connected to this if it is removed from the space in which it is installed. The power cable

must only be substituted by technical service staff or by technicians with equivalent qualifications.

EN 06

1.3 Recommendations

After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.

Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium foil or

any other protection, in direct contact with the hot enamel, risks melting and deteriorating the enamel of the

insides. In order to prevent excessive dirtying of your oven and the resulting strong smokey smells, we

recommend not using the oven at very high temperature. It is better to extend the cooking time and lower the

temperature a little. In addition to the accessories supplied with the oven, we advise you only use dishes and

baking moulds resistant to very high temperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required to

rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation may

cause harm or injury to people, animals or belongings. The manufacturer cannot be held responsible for such

harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good ventilation

in the oven space to allow proper circulation of the fresh air required for cooling and protecting the internal

parts. Make the openings specified on last page according to the type of fitting.

1.5 Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding electric

and electronic appliances (WEEE). The WEEE contain both polluting substances (that can have a

negative effect on the environment) and base elements (that can be reused). It is important that

the WEEE undergo specific treatments to correctly remove and dispose of the pollutants and

recover all the materials. Individuals can play an important role in ensuring that the WEEE do not

become an environmental problem; it is essential to follow a few basic rules:

- the WEEE should not be treated as domestic waste;

- the WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the

old one can be returned to the vendor who must accept it free of charge as a one-off, as long as the appliance

is of an equivalent type and has the same functions as the purchased appliance.

SAVING AND RESPECTING THE ENVIRONMENT

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as

possible, because heat from the cavity disperses every time it is opened. For a significant energy saving,

switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the

residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat

dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed cooking"

programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time

slot.

1.6 Declaration of compliance

By placing the mark on the appliance, we are confirming compliance to all relevant European safety,

health and environmental requirements which are applicable in legislation for this product.

With this the Candy Hoover Group, declares that the appliance marked with co m p l i e s w i t h t h e

essential requirements of the Directive 2014/53/EU.

To receive a copy of the declaration of conformity, please contact the manufacturer at:

www.candy-group.com.

EN 07

2. Product Description

2.1 Overview

2.2 Accessories (According to model)

1 Metal grill

2 Drip pan

Holds baking trays and plates.

Collects the residues that drip during the cooking

of foods on the grills.

EN 08

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Turnspit

4. Metal grill

5. Teflon tray

6. Drip pan

7. Fan (behind the steel plate)

8. Meat probe

9. Oven door

3 Pastry tray

The pastry tray must be placed on the shelf. It is for

cooking small pastries like choux, biscuits,

meringues, etc...

Never place the pastry tray directly on the oven

bottom.

4 Led vision

Is an illumination system which replaces the

traditional « light bulb ». 14 LED (for non-pyrolitic

versions) or 10 High Power LED (for pyrolitic

versions) lights are integrated within the door.

These produce white high quality illumination

which enables to view the inside of the oven with

clarity without any shadows on all the shelves.

Advantages :

This system, besides providing excellent

illumination inside the oven, lasts longer than the

traditional light bulb its easier and to maintain and

most of all saves energy.

-Optimum view

-Long life illumination

-Very low energy consumption, -95% in

comparison with the traditional illumination High.

Meat-probe

Measures the internal temperature of food during

cooking. Insert the meat-probe into the hole on

the top of the cavity.

– Prepare the food and properly insert the meat

probe into the food. Do not preheat or start

cooking before properly inserting the meat probe.

Probe should be inserted into the food and

receptacle while the oven is still cool.

– Do not insert the meat probe in the frozen food.

– Do not leave the meat probe inside the oven

when it's not used: it could damage.

EN 09

No pre-heating is required for rotisserie cooking.

Cooking with the door closed. The energy

consumption is 90-95% less than traditional

system. When the oven is in use, any unused

accessories should be removed from the oven.

•Unscrew the hooks

•Put the spit into the meat

•Fix the meat with the hooks

•Tighten the screws

•Insert the spit into the motor hole

•Demount the handle before to start cooking.

Turnspit

Our technology and experience have brought a

feature typical of professional kitchens into the

home. A Multijet lateral ventilation system emit

microflows of hot air directly onto the food, at low

speeds, enveloping it completely.

This enables uniform cooking, reduced loss of

food moisture and simultaneous cooking on

different levels.

Pro/Exp'r Technology

Lateral wire grids

It located at both sides of the oven cavity. It holds

metal grills and drip pans.

2.3 First Use

PRELIMINARY CLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

EN 10

3. Use of the Oven

3.1 Display description

Cooking

duration

Cooking

end

Timer

Clock

set

Child

lock

WiFi

ON / OFF

EXTRA

The oven is switched on and off with this button.

If the oven is switched off, the display shows the clock. When

the oven is inactive, all the functions are available except the

cooking duration and end of cooking.

If the clock is not set, the oven does not work: the display

flashes, showing "12:00" and the only functioning key is

Extra. From the Extra key, the following functions can be set:

EN 11

FUNCTION HOW TO ACTIVATE

HOW TO

DEACTIVATE

WHAT IT DOES WHY IT IS NEEDED

COOKING

DURATION

NB: can only be set with an

active cooking programme.

Press EXTRA twice and set

the time using the “+” and

“-” keys, confirming by

pressing "SELECT".

The display shows “00:00”

if no cooking duration has

been inserted, otherwise

the display shows the time

remaining.

•To modify cooking before

the set time, press EXTRA

twice and regulate the

cooking time as required

using the “<” and “>”

keys, before pressing

SELECT" once more.

•To cancel the cooking

duration, reset the display

to “00:00”.

When a cooking programme

terminates , the oven

switches off while the display

shows "END" (the cooking

programme icon remains on)

until the On/Off button, the

only functioning key, is

pressed. When a c o o k i n g p

r o g r amme terminates, an

alarm will sound.

When the cooking time has

f i n i s h e d , t h e o v e n

automatically switches off

and the alarm sounds for a

few seconds.

NB: can only be set with an

active cooking programme.

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

The cooking duration is

automatically calculated.

END OF

COOKING

•This function is also used for

cooking that can be scheduled

in advance.

•If a cooking programme is set,

it will be lost if the "F" key is

pressed.

•If delayed cooking is set, the

oven switches off and the

display shows the current time

while the cooking programme,

cooking duration and end of

cooking icons are illuminated.

•If a cooking programme is set,

by pressing the “<” and “>” keys

you can see and modify the

temperature set: at the first t o

u c h , t h e o p e r a t i n g

temperature is shown while

another touch will allow you to

modify said temperature.

To modify the end of

cooking before the set

time, press EXTRA enough

times to illuminate the

icon, regulate the end of

cooking time as required

using the “<” and “>” keys

and confirm by pressing

"SELECT".

To cancel the end of

cooking time, reset the

display to “00:00”.

TIMER

•To modify the timer, press

EXTRA enough times to

i l l u m i n a te th e i c o n ,

regulate the cooking time

as required using the “<”

and “>” keys and confirm

by pressing "SELECT".

•This function activates an

alarm that sounds for a few

seconds when the set time

expires (this function does

not switch the oven off).

You can select a time

between 00:00 and 23:59.

• T h e di s p l ay shows

“00:00” if no time has been

inserted or the time

remaining if this has

already been set.

Press EXTRA enough times

to illuminate the icon and

use the “<” and “>” keys to

set the time, confirming by

pressing SELECT.

• The t imer funct ions

regardless of whether the

oven is switched on.

SETTING

THE CLOCK

•The alarm functions

regardless of whether the

oven is switched on.

•Switched on for the ﬁrst

time, the display

illuminates and sh

ows

"12:00".

•To modify the time, press

EXTRA enough times to

illuminate the icon and use

the “<” and “>” keys to set

the time, conﬁrming it by

pressing SELECT.

•It allows you to set the

time that appears on the

display.

•This function is useful

when there are children in

the house.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

activate this function: the

display will show ON; to

conﬁrm press SELECT.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

deactivate this function:

the display will show OFF;

to conﬁrm press SELECT.

•If the function is active

only the "Extra" button, to

deactivate the function,

and "On/Off" button can

be used.

CHILD

SAFETY

LOCK

W h e n a c o o k i n g

programme terminates,

the oven switches off while

the display shows "END"

(the cooking programme

icon remains on) until the

On/Off button, the only

functioning key, is pressed.

W h e n a c o o k i n g

programme terminates, an

alarm will sound.

EN 12

Pressing "Extra" on the timer display allows you to select the Wi-

Fi menu. In the Wi-Fi menu if you press the "< >" buttons you can select:

- Off: Wi-Fi is off; the oven is not controllable via the app.

- On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking

functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You

can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can

only be switched on via the app.

- Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to

reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5

minutes to complete the enrolment process. During this process the cooking functions, recipes and

temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".

You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it

can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and

then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset

procedure automatically.

- Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled

before this is possible.

If Wi-Fi is not configured it is only possible to choose between off and reset.

When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by

the user.

Wi-Fi Enrolment:

To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by

pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5

minutes to complete the enrolment process.

Wi-Fi icon

- icon not lit: Wi-Fi is off.

- Icon blinks 1 second on an 1 second off: the oven is accessible to your Wi-Fi network and ready to be enrolled.

If the enrolment has not been successful, the Wi-Fi icon will switch off after 5 minutes.

- Icon is permanently lit: the oven is connected to your Wi-Fi router.

- The icon blinks 3 seconds on and 1 second off: the oven is trying to connect to your Wi-Fi router.

- The icon blinks 1 second on and 3 seconds off: the oven is in read only mode.

WiFi (depends on the oven model)

ROSIERES E-PICURIEN:

For detailed information on HOW TO CONNECT your E-picurien appliance

and HOW TO USE IT effectively, go to www.rosieresepicurien.com.

WIRELESS PARAMETERS

Wi-Fi

IEEE 802.11b/g/n

2412÷2484

41.4

Technology

Standard

Frequency Band(s) [Mhz]

Maximum Power [mW]

LANGUAGE SETTING The language can be set when

the oven is switched off by pressing the Extra and Select

buttons simultaneously and for 3". The current language is

shown on the display and can be changed by pressing the

“<” or “>” keys, confirming it by pressing SELECT. Available

languages are: Italian, English, French and German.

SELECT Any selection must be confirmed. If not

confirmed within 15 seconds, the selection is cancelled.

By changing menu, any unconfirmed selection is lost.

“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still

hot, the display shows the current time alternating with the message “HOT” at 3" intervals.

EN 13

Product information for networked equipment

power consumption of the product in networked

standby if all wired network ports are connected and

all wireless network ports are activated:

2,0 W

How to activate wireless network port:

If the wifi icon is on or blinks the wifi module is on If

the oven is already enrolled : press "Extra" on the

timer display and select the Wi-Fi menu then press

the "<>" buttons, select On and press the select

button.

If the oven is not enrolled : follow procedure for

enrolling.

How to deactivate wireless network port:

If the wifi icon is off the wifi module is off To switch off

the wifi press "Extra" on the timer display and select

the Wi-Fi menu then press the "<>" buttons, select

Off and press the select button.

Grill

Oven box

Turnspit

Circular

heating element

Bottom heating element

Fan

Defost

Pyro

PRE-SETTED RECIPES When a recipe is selected the display shows “R” followed by the number of

the recipe and shows the correspondent way of cooking.

The available recipes are the following:

MEAT PROBE

RECOMMENDED TEMPERATURES

Meat

Rare

Medium rare

Medium

Well done

Salmon

Chicken

min 68

RECIPE

COOKING

METHOD

TEMPERATURE

COOKING

DURATION

R1- Lasagne

R2- Roast/Oven cooked chicken

R3- Crusted bream

R4- Baked potatoes

R5- Omelette

Static + fan

Static

150°

180°

160°

45’

40’

25’

Static + fan

180°

40’

45’

R6- Apple pie

Static + fan

180°

45’

NB: It is not possible to change neither the temperature nor the cooking duration.

MEAT PROBE (depends on the oven model) If the meat probe is identified, the display shows

"PROBE"; if the meat probe is inserted once a cooking programme is underway, the programme stops.

When a cooking programme is selected, the display shows the default temperature but is never higher

than 200°C: the selectable temperature is also limited to 200°C.

When the temperature is confirmed, by pressing "Select", the display shows “Ϙ 40°”: it is now possible

to select the meat probe target temperature, between 30°C and 90°C at 1°C intervals. When the meat

probe temperature is confirmed, press the "Select" key and the display shows “Ϙ” followed by the

actual temperature taken by the meat probe (1 degree intervals). As soon as the meat probe reaches

the set temperature, the cooking programme terminates. If a cooking programme is set with the meat

probe, by pressing the “-” and “+” keys you can see and modify the temperature of the meat probe: at

the first touch of one of the two keys, the display shows the meat probe target temperature, while at the

next touch you can change the selected temperature of the probe.

If the user changes the cooking programme, the meat probe temperature setting is reset. Repeat the

setting sequence to select a new target temperature. The meat probe cannot be used with pre-set

cooking or with the separating plate (if present) inside the oven: in this case the display shows“Ϙ NO”

and will not execute any command until the meat probe is removed. Defrost, grill, any program with

turnspit, pyrolysis and any programmed cooking are not allowed with the meat probe (they are not

shown on the menu).

EN 14

EN 15

T °C

default

180

220

210

200

210

ECO

T °C

range

40 ÷ 40

50 ÷ 240

50 ÷ 280

50 ÷ 230

150 ÷ 220

50 ÷ 240

ECO÷SUPER

L1 ÷ L5

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

PYROLYSIS

GRILL: use the grill with the door closed.

The top heating element is used alone and you can adjust the temperature. Five

minutes preheating is required to get the elements red-hot. Success is guaranteed for

grills, kebabs and gratin dishes. White meats should be put at a distance from the grill;

the cooking time is longer, but the meat will be tastier. You can put red meats and fish

fillets on the shelf with the drip tray underneath. The oven has two grill positions:

Grill: 2140 W Barbecue: 3340 W

GRILL + FAN : use the turbo-grill with the door closed.

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary for red meats but not for white meats. Ideal for cooking thick

food items, whole pieces such as roast pork, poultry, etc. Place the food to be grilled

directly on the shelf centrally, at the middle level. Slide the drip tray under the shelf to

collect the juices. Make sure that the food is not too close to the grill. Turn the food

over halfway through cooking.

MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish and

vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time with or

without the same preparation in one or more positions. This cooking method gives

even heat distribution and the smells are not mixed.

Allow about ten minutes extra when cooking foods at the same time.

CONVENTIONAL: Both top and bottom heating elements are used. Preheat the

oven for about ten minutes. This method is ideal for all traditional roasting and

baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil wrapped food

(papillotes), flaky pastry. Place the food and its dish on a shelf in mid position.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a few minutes without the

protein content of the food being changed or altered.

*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.

3.2 Cooking Modes

BOTTOM HEATING + FAN: The bottom heating element is used with the fan

circulating the air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté. It prevents food from drying and encourages rising in cakes, bread

dough and other bottom-cooked food. Place the shelf in the bottom position.

GRILL + TURNSPIT: use the turnspit with the door closed. The top heating element is

used with the turnspit rotating the food to be cooked. The heating temperature can be

adjusted as required. The turnspit is best used for medium-sized items. Ideal for

rediscovering the taste of traditional roast. No preheating is required for turnspit cooking.

L1 ÷ L5

GRILL+FAN+TURNSPIT: It is indicated for cooking the meat, particularly voluminous,

on the spit and it allows you to cook the food faster.

220

150 ÷ 220

EN 16

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

OVEN WINDOW SEAL

If dirty, the seal can be cleaned with a slightly damp sponge.

ACCESSORIES

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

DRIP PAN

After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in

hot water, using a sponge and washing-up liquid.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.

4.2 Pyrolysis

The oven is equipped with a pyrolyser cleaning system, which destroys food residues at high

temperature. The operation is carried out automatically by means of the programmer. The resulting

fumes are rendered “clean” by passing over a Pyrolyser wich starts as soon as cooking begins. As very

high temperatures are required by the Pyrolyser, the oven door is fitted with a safety lock. The pyrolyser

can be stopped at any time. The door cannot be opened until the safety lock is displayed.

NOTE : If a hob has been fitted above the oven, never use the gas burners or the electric hot-plates while

the Pyrolyser is working, this will prevent the hob from overheating.

TWO PYROLYTIC CYCLE are pre-set:

ECO PYROCLEAN : Cleans a moderately stained oven. Operates for a period of 90 minutes.

SUPER PYROCLEAN : Cleans a heavily stained oven. Operates for a period of 120 minutes.

Never use commercially available cleaning products on a Pyrolytic oven!

Tip : Carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of residual

heat, thus saving energy.

Before executing a pyrolytic cycle:

•Remove all the accessories from the oven because they are not able to tolerate the high temperatures

used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and the telescopic

guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat probe it is

necessary, before making the cleaning cycle , close the hole with the nut provided.

•Remove any large spillages or stains as it would take too long to destroy them. Also excessively large

amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic cycle.

•Close the oven door.

•Excess spillage must be removed before cleaning.

• Clean the oven door.

• Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use

detergents.

• Remove all accessories and the sliding rack kit (where present).

• Do not place tea towels.

Using the Pyrolitic cycle:

If a pyrolysis cycle is chosen the display shows “ECO”, that lasts 90 minutes, blinking; by the "<" and ">" it

is possible to change in “SUPER” that lasts 120 minutes.

If a pyrolysis is already started it is no more possible to change from “ ECO” to “SUPER” and vice versa.

It is not possible to modify a pyrolysis duration but ending time can be modified.

During pyrolysis the buzzer does not sound.

Pyrolysis is not available if separator or side grids or the meat probe are detected, and it is not

programmable via WiFi.

4.3 Maintenance

EN 17

INSTRUCTION FOR REMOVAL AND CLEANING OF THE SİDE RACKS

1. Unscrew the bolt in an anti-clockwise direction.

2. Remove the side racks by pulling them towards you

3. Clean the side racks in a dishwasher or with a wet sponge and then dry them immediately.

4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring they are fully

tightened

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

3. Replace the window by carrying out the procedure in reverse.

REMOVAL AND CLEANING OF THE GLASS DOOR

1. Open the oven door.

2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the second and third glass (if present)).

7. At the end of cleaning or substitution, reassemble the parts in reverse order.

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.

EN 18

LOW-E

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

EN 19

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

FR 20

Conseils De Securite

• Pendant la cuisson, de l’humidité peut se condenser à l’intérieur de la

cavité ou sur la vitre de la porte. Il s’agit d’un phénomène normal. Pour

réduire cet effet, attendez 10-15 minutes après avoir allumé l’appareil

avant de mettre les aliments au four. La condensation disparaîtra de

toutes façons dès que le four aura atteint la température de cuisson.

• Cuisez les légumes dans un récipient avec couvercle plutôt que dans

un ustensile ouvert.

• Évitez de laisser des aliments à l’intérieur du four plus de 15-20

minutes après cuisson.

• AVERTISSEMENT : L’appareil et ses parties accessibles chauffent

pendant l’utilisation.

Faites attention à ne pas toucher les parties chaudes.

• AVERTISSEMENT : Les parties accessibles peuvent devenir très

chaudes quand le grill est en marche. Les enfants doivent être tenus à

une distance de sécurité.

• AVERTISSEMENT : Vérifiez que l’appareil est éteint avant de remplacer

l’ampoule, pour éviter le risque de chocs électriques.

• AVERTISSEMENT : Afin d’éviter tout risque lié à la réinitialisation

accidentelle de l’interrupteur thermique, l’appareil ne doit pas être

alimenté par un dispositif de commutation externe, tel qu’une

minuterie, ou relié à un circuit régulièrement allumé et éteint.

• Les enfants de moins de 8 ans doivent rester à une distance de

sécurité de l’appareil s’ils ne sont pas surveillés en permanence.

• Les enfants ne doivent pas jouer avec l’appareil.

L’appareil peut être utilisé par des enfants de plus de 8 ans et par des

personnes dont les capacités physiques, sensorielles ou mentales sont

limitées, sans expérience ni connaissance du produit, uniquement s’ils

sont surveillés ou s’ils ont été informés de la manière d’utiliser l’appareil,

en toute sécurité et qu’ils comprennent les risques possibles.

• Le nettoyage et l’entretien ne doivent pas être effectués par des

enfants sans surveillance.

• N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs

métalliques acérés pour nettoyer les vitres des portes des fours, car cela

pourrait rayer la surface et provoquer la rupture de la vitre.

• Coupez le four avant de retirer les pièces amovibles.

La page charge ...

ROSIERES RFN7870IN/1 Manuel utilisateur

Marque: ROSIERES

Modèle: RFN7870IN/1

Catégorie: Fours

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: ROSIERES RFN7870IN/1 User manual

ROSIERES RFN7870IN/1 Manuel utilisateur

Ce manuel convient également à

ROSIERES RFN7870IN/1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents