Electrohome EAJUK500 Manuel utilisateur

Marque: Electrohome

Modèle: EAJUK500

Catégorie: Lecteur CD

Taper: Manuel utilisateur

Thank you for your purchase of this Electrohome product. Please read this instruction

manual carefully before using product to ensure proper use. Keep this manual in a safe

place for future reference.

www.electrohome.com

Instruction Manual

PLEASE RETAIN ORIGINAL

PACKAGING FOR

WARRANTY PURPOSES

EAJUK500

- 2 -

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET

UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong is provided for your safety. If the provided plug does not t into you outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and point

where they exit from the apparatus.

11. Only use attachments / accessories specied by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14. This appliance shall not be exposed to dripping or splashing water and no object lled with liquids such as vases shall

be placed on the apparatus.

15. Do not overload wall outlet. Use only power source as indicated.

16. Use replacement parts as specied by the manufacturer.

17. The product may be mounted to a wall only if recommended by the manufacturer.

18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE,

REFER TO QUALIFIED USER PERSONNEL.

The lightning ash with arrowhead symbol, within an equilateral traingle, is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sucient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

- 3 -

CLASS 1

LASER PRODUCT

APPAREIL À LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM

• Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters,

on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to

constant vibration and/or humid or moist areas.

• Do not attempt to clean this unit with chemical solvents as this might damage the nish. Use a clean dry cloth.

• Operate controls and switches as described in the manual. Before turning on the power, make certain that power cord is

properly installed.

• Store your CDs in a cool area to avoid damage from heat.

• When moving the unit, be sure to rst disconnect the power cord.

FCC INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT

Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit o when not in use

or move it away from the aected radio/television tuner.

NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in

the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television operation

(which can be determined by turning the equipment o), the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

WARNING - DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2

hours and can lead to death.

Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it

away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

- 4 -

Important Safety Instructions ..................................................................................................................... 2

What’s Included ........................................................................................................................................... 4

Buttons and Connections ............................................................................................................................. 5

Preparation for Use .....................................................................................................................................10

Power Source ......................................................................................................................................10

Battery Backup ....................................................................................................................................10

Operation ...................................................................................................................................................11

Basic Function ....................................................................................................................................11

Setting the Clock ................................................................................................................................11

Setting the Timer ...............................................................................................................................11

Sleep ..................................................................................................................................................12

Volume Control ..................................................................................................................................12

Mute ..................................................................................................................................................12

EQ ......................................................................................................................................................12

Radio Operation .................................................................................................................................13

Using Earphones ................................................................................................................................14

Charging your USB device ..................................................................................................................14

Using External Speakers .....................................................................................................................14

USB & SD Card Operation ....................................................................................................................14

CD Player ............................................................................................................................................15

Recording ........................................................................................................................................... 17

Care and Maintenance................................................................................................................................18

Specications .............................................................................................................................................18

Electrohome Warranty ...............................................................................................................................19

Notes ..........................................................................................................................................................20

WHAT’S INCLUDED

• RCA Auxiliary Cable

• 3.5mm Auxiliary Cable

• Lighting System Remote Control

• Jukebox Remote Control

• External Power Adapter

• Instruction Manual

• 1 Year Warranty

• Lifetime Customer Support

TABLE OF CONTENTS

- 5 -

Main Unit – Front

1. VOLUME – TOUCH PLATE

2. VOLUME + TOUCH PLATE

3. FRONT PANEL

4. MAGNETIC PANEL (LEFT)

5. USB CHARGING PORT

6. AUX INPUT

7. MAGNETIC PANEL (RIGHT)

8. EARPHONE INPUT

9. SPEAKER

The USB CHARGING PORT is ONLY to CHARGE your USB device, not for playback .

BUTTONS AND CONNECTIONS

- 6 -

BUTTONS AND CONNECTIONS

Main Unit – Control Panel

1. LIGHT BUTTON

2. SD CARD INPUT

3. PRESET +

4. PRESET –

5. STANDBY LED

6. SENSOR

7. VOLUME CONTROL KNOB

8. LCD DISPLAY

9. REC/ERASE

10. FUNCTION

11. USB INPUT

12. POWER BUTTON

13. PROGRAM

14. UP/F.F.

15. TIMER

16. DOWN/F.R.

17. CD DRAWER

18. REPEAT/ST

19. CD OPEN/CLOSE

20. PLAY/PAUSE

21. STOP

1 2

4 5 6 7

18 19

The USB INPUT is ONLY to PLAYBACK AND RECORD using your USB device.

- 7 -

Jukebox Remote Control

1. POWER STANDBY

2. EQ

3. PRESET +

4. RECORD

5. PRESET –

6. PLAY/PAUSE

7. DOWN/FAST REWIND

8. RANDOM

9. ID3

10. STOP

11. 0-9 NUMBER KEYS

12. CD OPEN CLOSE

13. MUTE

14. SLEEP

15. VOLUME

16. FUNCTION

17. VOLUME

18. UP/FAST FORWARD

19. PROGRAM

20. REPEAT

21. TIMER

22. MONO/STEREO

The remote controls can be stored on one of the front magnetic panels of the cabinet,

as indicated on page 5, provided that a metal battery has been tted.

BUTTONS AND CONNECTIONS

- 8 -

Lighting Remote Control

1. SPEED –

2. SPEED +

3. GREEN

4. RED

5. LIGHT GREEN

6. ORANGE

7. STATIC CYAN

8. DARK YELLOW

9. LIGHT BLUE

10. YELLOW

11. INCREASE GREEN

12. INCREASE RED

13. DECREASE GREEN

14. DECREASE RED

15. PLAY/PAUSE

16. NO FUNCTION

17. BLUE

18. WHITE

19. DARK BLUE

20. COLOUR CHANGE

21. PURPLE

22. STROBE

23. PINK

24. CASCADING COLOUR

25. INCREASE BLUE

26. FAST COLOUR CHANGE

27. DECREASE BLUE

28. DIY (USER COLOUR SET)

The remote controls can be stored on one of the front magnetic panels of the cabinet,

as indicated on page 5, provided that a metal battery has been tted.

Using the DIY function:

To create your own custom colour, press the DIY Key. Then press and hold the selected colour

and

keys to adjust the colour ratio of Red, Green and Blue. Once the colour adjustment is complete, you can

press and hold the DIY key for ve seconds to store the colour. The LED will ash once to illustrate that

the colour has been stored. When you re-enter DIY mode, the stored colour will be programmed.

BUTTONS AND CONNECTIONS

- 9 -

Main Unit – Back

MAIN POWER /

ALIMENTATION PRINCIPALE

AUX IN / ENTRÉE AUX.

R / D

R / D +

R / D –

L / G +

L / G –

DC 15V / CC 15V

EXT. SPEAKER /

HAUT-PARL. EXT. (4Ω)

SPEAKER /

HAUT-PARL.

INT. EXT.

L / G

ON /

MARCHE

OFF /

ARRÊT

3 4

1. EXTERNAL FM ANTENNA

2. AUX IN INPUT

3. BATTERY BACKUP

4. MAIN POWER

5. DC POWER INPUT

6. SPEAKER INT./EXT. SWITCH

7. EXTERNAL SPEAKER OUTPUT

BUTTONS AND CONNECTIONS

- 10 -

PREPARATION FOR USE

POWER SOURCE

1. Unwind the external power supply at the back of unit and connect it to power adaptor AC inlet.

2. The power adaptor DC cord connects to main unit of the DC INPUT JACK.

3. Connect the external power supply to the wall socket.

POWER UP YOUR UNIT

• This system goes into STANDBY MODE automatically and the LCD screen will

appear as shown on the right.

• Press POWER /

to power on the unit, LCD backlight will light up. When out

of STANDBY MODE, the LED is OFF and the LCD screen will appear as shown on

the right.

BATTERY BACKUP

The BATTERY BACKUP system is to maintain your clock and alarm settings during a power outage. In the

event of a power outage, the BATTERY BACKUP will save your time and alarm settings until the power is

restored. To utilize the BATTERY BACKUP, you must install two AAA batteries. THE BATTERY BACKUP WILL

NOT OPERATE UNLESS BATTERIES ARE INSTALLED.

To install batteries, follow the instructions below:

1. Remove the BATTERY COMPARTMENT COVER from the back

of the unit.

2. Insert two new AAA batteries. Follow the diagram inside the

battery cover to ensure that the batteries are properly inserted

with correct polarity as shown inside the battery cover.

3. Reinstall the BATTERY COMPARTMENT COVER.

WARNING

• Alkaline batteries are recommended.

• Place batteries based on the polarity shown inside the battery compartment.

• DO NOT mix dierent types of batteries and DO NOT mix new and exhausted batteries.

• DO NOT use rechargeable batteries and DO NOT charge non-rechargeable batteries.

• Batteries must be inserted with correct polarity.

• When not using the unit for a prolonged period of time, please remove the batteries to avoid

possible damage caused by leaking batteries.

• DO NOT short circuit the supply terminals of the batteries.

• Exhausted batteries must be removed from the unit.

• DO NOT throw batteries into the re. They may explode.

REAR OF

JUKEBOX

- 11 -

BASIC FUNCTION

1. Press FUNCTION /

FUNC

to select from:

2. When the unit is on, press POWER /

to switch the unit o. LCD backlight

will be turned o and the LCD screen will show "GOOD BYE" for 2 seconds,

then the STANDBY LED is turned on.

SETTING THE CLOCK

After connecting the system to the power supply, set the clock rst.

1. Press POWER /

to switch the unit to STANDBY MODE.

• The display shows the time.

• 12:00 ashes by default if you have not set the clock.

2. In STANDBY MODE, press PROGRAM /

ONCE to select a12 hour clock

(AM will appear on the display) and PRESS the PROGRAM /

button to

select the 24 hour clock.

3. Press and hold PROGRAM /

until the HOUR digits start ashing.

4. Press the FF /

or FR / button repeatedly to change the HOUR to the desired time.

5. Press PROGRAM /

again to conrm. The MINUTE digits will start ashing.

6. Press the FF /

or FR / button repeatedly to set the minutes to the desired time.

7. Press PROGRAM /

again to conrm. The time will stop ashing, and the clock is set.

SETTING THE TIMER

The unit can be used as an alarm clock, whereby the selected source (CD, TUNER,

USB, SD CARD OR PHONO) will start playing at a preset time. PLEASE BE SURE

TO SET THE CLOCK TO THE CORRECT TIME BEFORE USING THE TIMER.

1. In STANDBY MODE, press and hold TIMER /

for more than 1 second, the

" icon and "TURN ON" message start ashing. Press

TIMER /

again on the remote to set when the timer comes ON.

2. Press FF /

or FR / repeatedly to set hours.

3. Press TIMER / on the remote to enter minutes setting mode.

4. Press FF /

/ or FR / repeatedly to set minutes.

OPERATION

In the STANDBY MODE, the tone, sound settings, tuner presets and the volume level (up to a maximum

volume level of 30) will be stored in the unit’s memory.

FM CD USB

AUX CARD

- 12 -

OPERATION

5. Press TIMER / again to set when the timer turns OFF. The " " icon

and "TURN OFF" message start ashing. Press TIMER /

on the remote

again to begin timer setting.

6. Press FF / or FR / repeatedly to set hours.

7. Press TIMER / on the remote to enter minutes setting mode.

8. Press FF /

/ or FR / repeatedly to set minutes.

9. Press TIMER /

or POWER / to turn the timer OFF.

SLEEP

You can set a certain period of time after which the system will switch to STANDBY MODE.

On the remote control, press SLEEP /

repeatedly to select the desired time period options (in minutes):

• Display shows in sequence: SLEEP 90, 80, 70, 60, 50, 40, 30, 20, 10

• Display shows the selected option briey and returns to its previous status.

To deactivate the sleep timer, press SLEEP /

again to "00" or Press POWER /

to switch the unit into STANDBY MODE.

VOLUME CONTROL

To adjust the VOLUME, you can press the VOLUME UP / / VOLUME DOWN / button on the remote

control, turn the VOLUME CONTROL KNOB on the front panel or press lightly on the TOUCH SENSITIVE

PLATES behind the chrome embellishments on the top of the jukebox (see diagram pg. 5). The LEFT button

DECREASES the volume, the RIGHT button INCREASES the volume.

MUTE

You can temporarily switch o the sound without switching o the unit.

1. Press MUTE /

on the remote control to switch the sound OFF, playback

will continue without sound.

2. To switch the sound ON , you can:

• press MUTE / again;

• adjust the volume controls;

• change the source

Press EQ /

on the remote control to select the desired EQ mode. There are 5 preset EQ modes:

- 13 -

RADIO

Antenna

For FM reception, the unit is equipped with an FM WIRE ANTENNA, move the wire until the reception is

clear and with no interferences.

FM Tuning

1. Press the FUNCTION /

button to set the unit to FM mode.

2. Auto Tuning – Press and hold FF /

or FR / until frequency begins to scroll through the

stations and automatically tunes to a station with sucient reception. If a station is received in stereo,

(ST) is shown. Repeat step 3 if necessary until you nd the desired station.

3. Manual Tuning – Press FF /

or FR / briey and repeatedly until a station is located.

Programming radio stations

You can store up to a total of 20 radio stations (FM) in the memory; manually or

automatically (Autostore).

1. Tune to your desired station

2. Press PROGRAM /

to activate programming, MEMORY and P01 will start to ash on the screen.

3. Press PRESET + /

or PRESET – / to allocate a number from

1 to 20 stations.

4. Press PROGRAM /

to conrm, display shows the preset number waveband

and the frequency of the preset station.

5. Repeat steps 1-4 to store other stations to listen to a preset station. Press PRESET + /

PRESET – /

once or more until the desired preset station in displayed. To listen to a preset station

Press PRESET + /

or PRESET – / once or more until the desired preset station in displayed.

Automatic programming radio stations

Automatic programming will station preset 1, from this preset number upwards, former programmed

tuner stations will be erased. Press and hold the PROGRAM /

button until AUTO appears.

• MEMORY will start ashing on the screen

• Available stations are programmed

• After all of the stations are programmed, the last preset station will play.

OPERATION

- 14 -

Using earphones (not included)

For private listening, plug your earphones into the

EARPHONE INPUT on the front panel of the jukebox.

The speakers will be disconnected when headphones

are plugged in.

Charging your USB device

To charge your USB device, pull down the front panel as

shown on the diagram to the right. Connect your USB device

to the Charging Port. You can use the shelf as a stand to

support your USB device while is it charging.

Using external speakers (not included)

With your new jukebox, you have the option of adding external speakers. The SPEAKER OUTPUTS for

external speakers are located on the back of the radio. Along with the speaker outputs, there is a switch

labeled INT./EXT. When using EXTERNAL SPEAKERS, the switch must be switched to the EXT. position. This

turns o the internal speakers in the radio and redirects the power to the external speakers. If you decide

not to use the external speakers, be sure the switch is set to INT.

USB & SDCARD OPERATION

USB operation

1. Press the FUNCTION /

button to set the unit to USB mode.

2. Plug-in the USB storage device in the USB INPUT on the Control Panel. READ is displayed as the system

scans the contents of USB device.

3. Track no. 1 of root folder (Folder 1) will playback automatically after nish

reading USB device contents.

4. Press FF /

or FR / once or repeatedly until the desired track number

appears in the display.

5. Press and hold FF /

or FR / to move within the track currently playing.

6. Press PRESET + /

or PRESET – / to select desired album.

7. Press STOP / to stop playback.

EARPHONE

INPUT

USB CHARGING

PORT

The USB CHARGING PORT ONLY CHARGES your USB device

when BATTERY IS LOW. Do not charge your device if

battery is completely depleted.

The USB INPUT is ONLY for PLAYBACK & RECORD using your USB device.

OPERATION

- 15 -

SD-Card operation

1. Press the FUNCTION /

button to set the unit to CARD mode.

2. Insert SD-Card into the card slot. “READ” is displayed as the system scans the contents of SD card.

3. Track no. 1 of root folder (Folder 1) will be playback automatically after nish reading SD card

contents.

4. Press FF /

or FR / once or repeatedly until the desired track number appears in display.

5. Press and hold FF / or FR / to move within the track currently playing.

6. Press PRESET + /

or PRESET – / to select desired album.

7. Press STOP /

to stop playback.

NOTE

• USB connector does not support connection with USB extension cable .

• This unit is not designed for communication with computer directly.

• Not all USB memory devices and SD cards will be compatible with this audio system

USB Specication:

• USB 2.0 Full speed, HOST (USB HUB is not supported) Corresponding Flash memory

• Compatible with MPEG Audio 1, 2, 2.5

• Compatible with Layer 1, 2, 3

• Compatible with Bit rate: 128 – 320 Kbps

• Subfolder nest : 8 levels

• Number of track / titles ; max 999

• Support ID3 tag V2.0

CD PLAYER

Playing a CD

1. Press the FUNCTION /

to set the unit to CD mode.

2. Press CD OPEN / CLOSE /

to open the CD compartment.

3. Insert a disc with the printed side facing up. Press CD OPEN / CLOSE / again to close the

compartment, READ is displayed as the CD player scans the contents of a disc.

IMPORTANT – Do not disconnect the USB device during USB mode, as this may damage the external device

or its les. Please power o rst or press another Mode before safely disconnecting the USB device.

OPERATION

- 16 -

4. Track no. 1 will playback automatically after it nishes reading the CD disc contents.

5. Press FF /

or FR / once or repeatedly until the desired track number appears in the display.

6. Press and hold FF /

or FR / to move within the track currently playing.

7. Press STOP /

to stop playback.

8. Press CD OPEN / CLOSE /

to open the CD compartment to remove/change the disc.

CD-MP3 disc playback

1. Press the FUNCTION /

to set the unit to CD mode.

2. Insert CD-MP3 format disc. Press CD OPEN / CLOSE /

again to close

the compartment. READ is displayed as the CD player scans the contents

of a disc.

3. Track no. 1 of root folder (Folder 1) will playback automatically after it n

ishes reading the CD-MP3 disc contents.

4. Press FF /

or FR / once or repeatedly until the desired track number

appears in the display.

5. Press and hold FF /

or FR / to move within the track currently playing.

6. Press PRESET + /

or PRESET – / to select the desired album.

7. Press STOP /

to stop playback.

PROGRAMMING TRACKS

You may store up to 20 tracks in the desired sequence.

1. When the CD player is stopped, press PROGRAM /

to start programming.

MEMORY and P0-01 start ashing on the screen.

2. Press FF /

or FR / once or repeatedly until the desired track number

appears in the display.

• For MP3: press PRESET + /

or PRESET – / to select the desired album.

3. Press PROGRAM /

to conrm, display shows stored track no. and

next position.

4. Repeat steps 2 and 3 to select and store all desired tracks. FULL is displayed if

you attempt to program more than 20 tracks.

5. Press PLAY/PAUSE to play the program.

Erasing the program

You can erase the contents of the memory by:

• Pressing STOP /

once if player is stopped, or twice during playback;

• Press POWER /

• Select another sound source

• Open the CD door

OPERATION

- 17 -

RECORDING From CD to SD/USB

The system is capable of converting entire CD discs to MP3 format and copy to a USB storage device or SD

card. It can also copy one single MP3 track to and from a USB/SD card.

1. In CD playback mode, press REC /

to start ripping to a USB/SD card (default to USB if both devices

are detected), playback will stop and skip back to the beginning of the current track, system will then

scan the contents of the USB/SD card and create a folder to store the MP3 track. Resume CD playback

and continue ripping from the starting point. The corresponding target device USB / CARD will start to

ash on the screen.

2. Press STOP /

to exit CD ripping.

MP3 copying

1. In CD-MP3, USB or SD card playback mode, press REC /

to start MP3 copying from a CD to a USB/

SD card, or from a USB to SD card or vice versa. Playback will stop and system will scan the contents of

the USB/SD card and create folder to store the MP3 track.

2. REC will be displayed on the screen

3. Message COPY 01 will be displayed, the proportional copied percentage will be shown on the

decimal number.

4. The target device USB or CARD will start to ash on the screen, the decimal number will be in

increments from 01 as MP3 copying starts, the process will stop as it reaches 100.

5. Current MP3 will be playback from beginning.

From AUX to SD/USB

The system is capable of converting an audio signal from AUX input to MP3 format and store it in a USB

storage device or SD card (defaults to USB if both devices are detected).

1. Press FUNCTION /

once or more to select AUX.

2. Press REC /

to start ripping, the system will scan the contents of the USB / SD card and create a

folder to store the MP3 track.

3. The REC and RIPP TO messages are displayed, AUX will start ashing on the screen.

4. The target device USB or CARD will start ashing on the screen as ripping begins.

5. Press STOP /

to exit AUX ripping.

IMPORTANT – The message NO FUNCT will be displayed if any key is pressed during the AUX ripping

process. The message NO DEV will be shown if neither USB or SD card is detected. The message FULL will be

displayed if not enough memory available in the target device.

OPERATION

- 18 -

CARE AND MAINTENANCE

CARING FOR COMPACT DISCS

• Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your ngers to

come in contact with the shiny, unprinted side of the compact disc.

• Do not attach adhesive tape, stickers, etc. to the compact disc label.

• Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive

cleaners to clean the compact disc. If necessary, use a CD cleaning kit.

• If a disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched).

• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer

edge of the compact disc. Never wipe in circular motions.

• Compact Discs should be stored in their cases after each use to avoid damage.

• Do not expose compact discs to direct sunlight, high humidity, high temperatures or dust, etc. Prolonged

exposure or extreme temperatures can warp the compact disc.

• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink,

may damage the surface.

Frequency Range FM 87.5 - 108 MHz

USB Port 2.0 Full Speed 512MB - 4GB (Support FAT16, FAT32)

Antennas External FM antenna wire

Power Source AC 120-240V DC15V 8A

Speaker Size 6 1/2” Dynamic Speakers x 2

Ohm 4 Ohm / Speaker

Watt 40W / Speaker

Tweeter Size 2 1/2” Tweeters x 2

Ohm 8 Ohm / Tweeter

Watt 10W / Tweeter

Total Audio Power Output 100 Watt Total

DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS

ELECTROHOME® WARRANTY

Thank you for choosing ELECTROHOME® Consumer Electronics Products!

ELECTROHOME gives the following express warranty to the original consumer purchaser or gift recipient for this ELECTROHOME product, when

shipped in its original container and sold or distributed by ELECTROHOME or by an Authorized ELECTROHOME Dealer: ELECTROHOME warrants that

this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such defects should be found in this

product within the applicable warranty period, ELECTROHOME shall, at its option, repair or replace the product as specied herein. Replacement

parts furnished in connection with this warranty shall be warranted for a period equal to the unexpired portion of the original equipment warranty.

This warranty shall not apply to:

A. Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as

outlined in the owner’s manual.

B. Any ELECTROHOME product tampered with, modied, adjusted or repaired by any party other than ELECTROHOME or ELECTROHOME’s

Authorized Service Centres.

C. Damage caused or repairs required as a result of the use with items not specied or approved by ELECTROHOME, including but not limited

to head cleaning tapes and chemical cleaning agents.

D. Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but not

limited to earphones, remote controls, AC adapters, batteries, stylus, trays, lters, cables, paper, cabinet, cabinet parts, knobs, buttons,

baskets, stands and shelves.

E. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.

F. Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid

spillage.

G. Any product received without appropriate model, serial number and CSA /cUL /cULus /cETL /cETLus markings.

H. Any products used for rental or commercial purposes.

I. Any installation, setup and/or programming charges.

Should this ELECTROHOME product fail to operate during the warranty period, warranty service may be obtained upon delivery of the ELECTROHOME

product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized ELECTROHOME Service Centre. In-home

warranty service may be provided at ELECTROHOME’s discretion on any ELECTROHOME television with the screen size of 40” or larger. This warranty

constitutes the entire express warranty granted by ELECTROHOME and no other dealer, service centre or their agent or employee is authorized to

extend, enlarge or transfer this warranty on behalf of ELECTROHOME. To the extent the law permits, ELECTROHOME disclaims any and all liability

for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of prots resulting from a defect in material

or workmanship relating to the product, including damages for the loss of time or use of this ELECTROHOME product or the loss of information. The

purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of defects, in the manner and

period of time described herein, constitute complete fulllment of all obligations and responsibilities of ELECTROHOME Electronics to the purchaser

with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.

1 YEAR PARTS & LABOUR WARRANTY PERIODS

TO OBTAIN THE NAME AND ADDRESS OF THE NEAREST AUTHORIZED ELECTROHOME SERVICE CENTRE OR FOR MORE INFORMATION ON THIS

WARRANTY

Contact ELECTROHOME Support by:

• Support: www.electrohome.com/support

• Website: www.electrohome.com

• By mail: ELECTROHOME Customer Service, 4080 Montrose Road, Niagara Falls, ON

L2H 1J9

ELECTROHOME is a registered trade-mark of Circus World Displays Limited 01.2014

PLEASE RETAIN

ORIGINAL PACKAGING

FOR WARRANTY