Midea MRT18S2AWW Mode d'emploi

Top-Freezer

Refrigerator

version A - 12 - 2019

MODEL NUMBER MRT18S2AWW

MRT18S2ABB

MRT18S2ASS

USER MANUAL

en

Warning:

Before using this product,

please read this manual carefully

and keep it for future reference.

The design and speciﬁcations

are subject to change without

prior notice for product

improvement. Consult with your

dealer or manufacturer for

details.

Power supply: 115 V

Frequency: 60Hz

Capacity: 18 cu. ft.

www.midea.com

Dear user

THANK YOU and CONGRATULATIONS on your purchase of this

high-quality Midea product. Your Midea refrigerator is designed

for reliable, trouble-free performance. Please take a moment to

register your new refrigerator.

Register your new refrigerator at www.midea.com under the

Support tab.

For future reference, record your product model and serial

numbers located on the back of the refrigerator above the

compressor compartment.

Model Number________________________________________

Serial Number_________________________________________

REFRIGERATOR SAFETY .................................................................3

OPERATION REQUIREMENTS .........................................................6

Location Requirements ..........................................................................6

Electrical Requirements .........................................................................7

PARTS AND FEATURES ...................................................................8

INSTALLATION ...................................................................................9

Unpack ..........................................................................................................9

Move to Final Location ...........................................................................9

Level Refrigerator ...................................................................................10

Reverse the Door Swing ......................................................................10

Ice Maker Installation Instructions (Optional) ............................ 13

BEFORE USE .................................................................................... 18

Waiting Period ......................................................................................... 18

Cleaning ..................................................................................................... 18

REFRIGERATOR USE....................................................................... 19

General ....................................................................................................... 19

Controls .....................................................................................................20

REFRIGERATOR CARE ....................................................................22

Cleaning .................................................................................................... 22

Moving ....................................................................................................... 22

Storage ...................................................................................................... 23

TROUBLESHOOTING ......................................................................23

General ...................................................................................................... 23

3

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

Error Codes .............................................................................................. 25

WARRANTY ..................................................................................... 26

REFRIGERATOR SAFETY

YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY

IMPORTANT

To prevent injury to the user or other people and property damage, the

instructions shown here must be followed. Incorrect operation due to

ignoring of instructions may cause harm or damage, including death.

The level of risk is shown by the following indications.

CAUTION

WARNINGWARNING

WARNING

This symbol indicates the possibility of dangerous voltage

constituting a risk of electrical shock is present that could

result in death or serious injury.

This symbol indicates the possibility of injury or damage to

property.

This symbol indicates the possibility of death or serious

injury.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

GENERAL APPLIANCE SAFETY

•

Read all safety warnings, instructions, illustrations and speciﬁcations

provided with this appliance. Failure to follow all instructions listed

below may result in electric shock, ﬁre and/or serious injury.

•

Save all warnings and instructions for future reference.

ELECTRICAL SAFETY

•

Plug into a grounded 3 prong outﬁt.

•

Do not remove ground plug.

•

Do not use an adapter.

•

Unplug the power cord by holding the plug, never by pulling the

cord.

•

DO NOT turn the appliance on or off by plugging or unplugging the

power cord.

•

DO NOT use an extension cord.

•

Unplug the refrigerator before cleaning or defrosting.

4

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

Grounding requirement

•

This refrigerator must be grounded. This refrigerator is equipped with

a grounding plug. The plug must be inserted into an outlet that is

properly installed and grounded.

•

Improper use of the grounding plug can result in a risk of electric

shock. Consult a qualiﬁed electrician or service person if the

grounding instructions are not completely understood or if doubt

exists as to whether the refrigerator is properly grounded.

LOCATION SAFETY

•

This refrigerator is intended to be used in household and similar

environments.

•

Install in accordance with the manufacturer’s instructions.

•

This refrigerator should not be recessed or built-in an enclosed

cabinet. It is designed for freestanding installation only.

WARNING - Keep ventilation openings, in the refrigerator, clear of

obstruction.

•

DO NOT install near any heat sources, such as radiators, heat

registers, stoves, other cooking appliances or in direct sunlight.

•

DO NOT store or use gasoline or any ﬂammable liquids inside or in

the vicinity of this refrigerator.

USE AND CARE SAFETY

•

Flammable refrigerant used. Follow handling instructions carefully.

Risk of ﬁre or explosion due to puncture of refrigerant tubing.

•

Flammable refrigerant used. Do not use mechanical devices to

defrost freezer. Do not puncture refrigerant tubing.

•

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

•

Keep key away from children.

•

Children should be supervised to ensure that they DO NOT play with

the appliance.

•

DO NOT touch the interior of the freezer with wet hands. This could

result in frostbite.

•

Clean only with a damp cloth. Use nonﬂammable cleaner.

SERVICE SAFETY

•

Disconnect power before servicing.

•

Flammable refrigerant used. To be repaired only by trained service

personnel. Do NOT puncture refrigerant tubing.

5

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

•

Refer all servicing to qualiﬁed service personnel. Do not repair or

replace any part of this appliance unless speciﬁcally recommended

in this manual. Servicing is required when the appliance has been

damaged in any way, such as the power supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the

appliance, the appliance has been exposed to rain or moisture, does

not operate normally, or has been dropped.

•

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent, or similarly qualiﬁed person, in order

to avoid a hazard.

•

If component part is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualiﬁed persons in order

to avoid a hazard.

•

Replace all parts and panels before operating.

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY

State of California Proposition 65 Warnings:

WARNING: Cancer and Reproductive Harm

-www.P65Warnings.ca.gov.

PROPER DISPOSAL

WARNING

Suffocation Hazard

Before you throw away your old refrigerator:

•

Remove the door or lid so that children cannot hide or get trapped

inside your old appliance.

•

Leave any shelves in place so that children may not easily climb

inside.

•

Failure to follow these instructions can result in death or brain

damage.

IMPORTANT: Flammable gas and refrigerant used. It is the consumer’s

responsibility to comply with Federal and Local regulations when

disposing of this product. Refrigerants must be evacuated by a licensed,

EPA certiﬁed refrigerant technician in accordance with established

procedures.

6

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

OPERATION REQUIREMENTS

LOCATION REQUIREMENTS

WARNING

Explosion and Fire Hazard

•

Keep ﬂammable materials and vapors, such as gasoline, away from

appliance.

•

Failure to do so, can result in death, explosion or ﬁre.

This refrigerator is designed to be freestanding only, and should not be

recessed or built-in.

•

Place your refrigerator on a ﬂoor that is level and strong enough to

support the refrigerator when it is fully loaded.

•

Place your refrigerator where there is access to the required electrical

connection. See “Electrical Requirements.”

•

Locate the refrigerator away from direct sunlight and sources of heat,

such as a stove, heater or radiator.

NOTES:

– Direct sunlight may affect the acrylic coating and heat sources may

increase electrical consumption.

– Extremely cold temperatures may also prevent the refrigerator from

performing properly.

•

Avoid locating the refrigerator in areas with high humidity.

•

Adequate air circulation is required for efﬁcient operation. Maintain the

recommended clearance to ensure adequate air circulation.

RECOMMENDED CLEARANCE

a

a 3" (7.6 cm)

Clearance at the

top, back and

both sides of

the refrigerator

NOTE: If you place the refrigerator next to a ﬁxed wall, allow sufﬁcient

space on the hinge-side for the door to swing open.

7

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

ELECTRICAL REQUIREMENTS

WARNING

Electrical Shock Hazard

•

Plug into a grounded 3 prong outlet.

•

Do not remove the ground prong from the power cord plug.

•

Do not use an adapter.

•

Do not use an extension cord.

•

Failure to do so can result in death, ﬁre or electrical shock.

IMPORTANT: A 115 Volt, 60 Hz., AC only, 15-amp fused, grounded electrical

supply is required.

•

Use an electrical outlet that accepts the grounding prong.

NOTE: The power cord is equipped with a 3-prong (grounding) plug

which mates with a standard 3-prong (grounding) electrical outlet.

•

We recommend that the refrigerator be plugged into an electrical

circuit serving ONLY this appliance.

•

Use an electrical outlet that cannot be turned off with a switch or pull-

chain.

•

DO NOT use an extension cord.

a

b

c

a 3-prong plug

b 3-prong receptacle

c Receptacle box cover

8

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

PARTS AND FEATURES

a

b

c

d

e

g

f

a

e

a Shelves ( 3 - wire shelf,

1 - glass

shelf)

b Freezer control

c Refrigerator control

d Crisper drawers (2)

e Door bins (6)

f Dairy bin

g Leveling feet (3 - bottom front)

Wheels ( 2 - bottom front,

2 - bottom back)

SPECIFICATIONS

Dimension (WxDxH)

Weight

29" x 30" x66"

(75 x 78.5 x 169.2 cm)

Power requirements 115 V ~ 60 Hz

Power cord length 66.9" (170 cm)

166 lbs. (75.5 kg)

9

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

INSTALLATION

UNPACK

WARNING

Fire or Explosion Hazard

•

Do not puncture refrigerant tubing.

•

Follow handling instructions carefully.

•

Flammable refrigerant used.

•

Failure to do so can result in death, explosion or ﬁre.

IMPORTANT: Remove ALL exterior and interior packing materials

including the foam packing between the exterior condenser and the

refrigerator cabinet.

MOVE TO FINAL LOCATION

WARNING

Fire or Explosion Hazard

•

Do not puncture refrigerant tubing.

•

Follow handling instructions carefully.

•

Flammable refrigerant used.

•

Failure to do so can result in death, explosion or ﬁre.

IMPORTANT:

•

If the refrigerator has been in a horizontal position for any period of

time, wait 24 hours to allow the refrigerant to settle before plugging in

the refrigerator.

•

When moving the refrigerator, DO NOT tilt it beyond 45° from upright.

NOTE: Tilting the refrigerator more than 45° could damage the

compressor and the sealed system.

10

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

LEVEL REFRIGERATOR

IMPORTANT: Level the refrigerator for proper operation and to avoid

cooling, frost and moisture problems that can occur when the door does

not close properly.

1. Move the refrigerator to its ﬁnal location. See “Move to Final Location.”

2. Place a carpenter's level on the top of the refrigerator cabinet.

3. Adjust the two leveling feet, (one foot located at each of the two front

corners of the refrigerator cabinet) until the refrigerator is level.

NOTE: The leveling feet are easier to adjust if you have someone push

against the top front of the refrigerator to take some w

feet.

To Raise - Turn the leveling feet clockwise.

To Lower - Turn the leveling feet counterclockwise.

REVERSE THE DOOR SWING

List of tools to be provided by the user

Phillips-head

Screwdriver

Putty knife

Flat-head

Screwdriver

" socket and

ratchet

Masking tape

1. Unplug your refrigerator and remove all food from the door shelves.

Remove all food from the inner door liner.

Tape the freezer door in place with masking tape.

Parts included with the hinge kit

Top left

hinge (1)

Center left

hinge (1)

Extra hole

caps (2)

Left top

hinge cover

(1)

Upper door

self-locking

block (1)

Left door-

open stopper

(1)

11

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

2. Remove the left cover plate and the right top hinge cover, then

unscrew screws and remove the right top hinge. Keep the screws to

reuse.

Left cover plate Right top hinge cover

3. Lift the freezer door up and away from your refrigerator.

4. Unscrew screws of middle hinge, remove the hinge, then lift the

refrigerator door up and away from your refrigerator. Save the screws

to reuse.

Center hinge

5. Unscrew screws of the bottom hinge, then remove the bottom hinge

from the bottom right side of the refrigerator.

6. Unscrew the hinge shaft from the right side of the bottom hinge and

move it to the left side, then secure the bottom hinge to the bottom

left side of the refrigerator, using the screws you removed previously.

Reattach the bottom hinge

Hinge shaft

Remove the bottom hinge

Hinge shaft

7. Remove the sleeves from the top right of doors and hole cap from top

left of doors, and assemble them on the opposite sides.

12

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

8. Remove the refrigerator door stopper and install it on the other side of

the door. Remove the freezer door self-locking block and stopper save

them to reuse take out the left self-locking block and stopper from the

accessory bag in the refrigerator and installed on the left of door.

Self-locking

Stopper

Hole cap

Stopper

Sleeves

9. Put down the refrigerator door bottom hinge vertically, take out the

middle hinge of the other side from the accessory bag then assemble

the middle hinge on.

Attach the left center hinge

13

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

10. Put down the freezer door on the middle hinge vertically, then take out

the top hinge and cover of other side from accessory bag, assemble

top hinge, hinge cover and hole cover.

Top hinge

Hole cover

(The picture above is only for reference. The actual conﬁguration will

depend on the physical product.)

ICE MAKER INSTALLATION INSTRUCTIONS

(OPTIONAL)

The refrigerator is ready for ice maker installation, if you need ice maker,

optional icemaker kit model # IM1800MD is available from your retailer.

Tools Required:

•

  copper supply line with shut off valve

•

  brass compression nut and ferrule

•

Minimum/Maximum inlet water pressure, 138/827 kPa (20/120 PSIG).

Connect to potable water supply only.

The copper tubing and shut off valve are available in a kit from your

local hardware or plumbing supply store. Coil enough tubing at the

back of the unit to allow movement for cleaning.

WARNING

Unplug the refrigerator. To eliminate the danger of electric shock during

installation, you must unplug the refrigerator from its electrical outlet.

14

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

12. Box cover - Qty 1

10. Water Valve - Qty 1

13. Mounting box - Qty 1

Tools Required:

Putty Knife Pliers

 " inch Socket Wrench Needle Nose Pliers or Nut Driver

Adjustable Wrench Knife

Flat Screw Driver

1. Disconnect the unit from the electrical supply.

2. Remove ice tray rack from freezer.

3. Move the freezer shelf to the next position.

15

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

4. In order to remove the plug, you

need to squeeze the two ends

and pull the plug out, or need to

use the tools such as a ﬂat screw

driver or needle nose plier.

Plug

5. Carefully Remove the plugs /

label from inside the freezer

compartment using a putty knife.

Label

6. Peel away the label covering the

ice-maker installation hole.

Remove

Label

7. Using a pair of needle nose pliers,

remove the foam from the hole.

Remove and

Discard Foam

8. Insert the water inlet tube into

the small hole on the back of

the refrigerator. Rotate the hose

while inserting until the ﬂat

surface of the hose is secure

against the back of the

refrigerator.

16

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

9. Slide the hose through the hole of the

security bracket and the foam insulation

pad, with the pad facing the rear of the

refrigerator and afﬁx the hose security

bracket and foam insulation pad in place

using the two (2) screws provided.

10. Push the water supply hose into the water

inlet hose as far as it will go and tighten the

Nylon compression nut onto the water inlet

hose until it is secure/tight.

Then tighten the nut until it is secure but DO

NOT overtighten using a wrench.

(11)Water

Inlet Tube

(3)Water

Tubing

11. Install the leveling bracket to the bottom

of the ice maker assembly with the screw

provided.

DO NOT TIGHTEN.

This bracket will be tightened later in this

installation.

Leveling

Bracket(7)

Screw(6)

12. Start two (2) long ice maker mounting

screws into the freezer wall.

Turn each screw ﬁve turns clockwise.

(5) Ice Maker

Mounting Screws

13. With the ice maker in one hand, plug the

wiring harness connector into the connector

mounted on the top freezer panel.

Make sure the connection is tight and secure.

Wiring Harness

Connector

17

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

14. Mount the ice maker assembly on to

the two (2) screws installed in

step # 11.

Tighten the screws.

Be sure that the water inlet tube is

securely inside the ﬁll cup.

Screw(5)

Fill Tube

15. Adjust the leveling bracket to ensure

the ice maker assembly is totally level.

The ice maker will be level when the

gap between the freezer wall and the

ice maker assembly is the same at the

top and bottom.

Once completely level, tighten the

leveling bracket screw.

(1) Ice Maker

(6)Screw

(7)Bracket

Top

Bottom

16. Reinstall the freezer shelf below the

ice maker assembly.

Set the ice container below the ice

maker assembly.

(2) Ice

Container

17. Connect the wiring harness to the

water valve as shown.

Ensure the connection is secure.

(10) Water valve

18. Install the mounting box on the

connecting terminal of the water

valve and the wiring harness. After

the cover is closed, ﬁx the box cover

and the mounting box ﬁrmly with

screws.

(12) Box cover

(13) Mounting box

18

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

19. Locate the factory punched holes at

the lower right panel on the rear of the

refrigerator.

20. Push up the white plastic ring at the bottom

of the valve until it doesn't move, then insert

the water pipe into it and loosen the plastic

ring.

(3) Plastic Water

Supply Tubing

21. Secure the plastic water tubing to the rear

of the refrigerator cabinet with the two (2)

plastic clamps provided.

** NOTE **

Clean the area of the back of the unit where

you will be placing the plastic clamp with

household cleaner, ammonia or alcohol to

provide a clean surface for the adhesive to

adhere to.

(9) Plastic Clamp

BEFORE USE

WAITING PERIOD

•

Before plugging the refrigerator into a grounded 3-prong electrical

outlet, allow it to stand upright for approximately 2 hours.

NOTE: This reduces the possibility of a malfunction in the cooling

system from improper handling during transportation.

CLEANING

1. Wash the refrigerator interior using a soft cloth dampened with a

baking soda solution (2 tablespoons baking soda mixed with 1 quart of

warm water).

2. Using a soft cloth, thoroughly dry all surfaces.

19

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

REFRIGERATOR USE

GENERAL

•

The storage life of frozen foods varies and the recommended storage

time should not be exceeded.

WARNING

Electrical Shock Hazard

•

Plug into a grounded 3 prong outlet.

•

Do not remove the ground prong from the power cord plug.

•

Do not use an adapter.

•

Do not use an extension cord.

•

Failure to do so can result in death, ﬁre or electrical shock.

1. Plug in your refrigerator. Wait for 30 minutes, and then open the

refrigerator door to determine if the refrigerator is working properly.

2. Place frozen food into the refrigerator as quickly as possible after

purchase. If there are instructions on the package, carefully follow

these instructions regarding storage times.

ENERGY SAVING TIPS

•

Allow hot foods to cool to room temperature before placing them in

the refrigerator. Foods that freeze too slowly may lose quality or spoil.

•

Overloading the refrigerator forces the compressor to run longer.

•

Wrap foods properly and wipe containers dry before placing them in

the refrigerator. This cuts down on frost build-up inside the refrigerator.

•

Do not line refrigerator storage shelves with aluminum foil, wax paper

or paper toweling. Liners interfere with cold air circulation, making the

refrigerator less efﬁcient.

•

Organize and label food to reduce door openings and extended

searches. Remove as many items as needed at one time, and then

close the door as soon as possible.

•

Do NOT add a large amount of unfrozen food to the refrigerator at one

time. This will lower the cooling efﬁciency of the refrigerator.

20

Refrigerator

Safety

Operating

Requirements

Parts and

Features

Installation

Refrigerator

Use

Refrigerator

Care

Troubleshooting

Before

Use

CONTROLS

a

b

c

d

g

f

e

a Setting button

b LED1 COOL indicator

c LED2 indicator

d LED3 indicator

e LED4 indicator

f LED5 COOLEST indicator

g LED6 Standby mode

DISPLAY

Once initially powered on, the display screen (including the key light) is on

full display for 3 seconds.

and then the refrigerator default setting is medium, and the LED 3

indicator will be illuminated.

Normal operation display

In case of a failure, the appropriate LED light show in combination the

failure code (in recycling display).

In case of no failures, the actual operation position of refrigerator will be

on display.

TEMPERATURE SETTING

Each time the temperature setting is pressed once, the temperature

setting changes one time.

After the temperature setting has been completed, the refrigerator will

run according to the set value after 25s.

From left to right, the temperature is lower.

The order of coldness settings is as follows:

LED1 LED2 LED3 LED4 LED5

La page charge ...

Midea MRT18S2AWW Mode d'emploi

Midea MRT18S2AWW Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents