Maytag MDG2706AWW Le manuel du propriétaire

Marque: Maytag

Modèle: MDG2706AWW

Catégorie: Sèche-linge électriques

Taper: Le manuel du propriétaire

M_ AG

MD-1

Important Safety

Instructions ................ 1-2

Using the Controls

Auto Dry Models .............. 3-4

Sensor Models ................ 5-6

Electronic Controls ............ 7-9

Troubleshooting ............. 14

Operating Tips .............. 10

Service & Warranty .......... 15

Accessories ................ 10

Guide d'utilisation

et d'entretien ............... 16

Care & Cleaning ............ 1 1

Guia de uso y cuidado ....... 32

Form No. Y81904 A Part No. 2206672 www.maytag.com Litho U.S.A. _2006 Maytag Appliances Sales Co.

ImportnntSnfet¥Instructions

What You Need to Know About

Safety Instructions

Warning and Important Safety Instructions appearing in

this guide are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining or operating appliance.

Always contact the manufacturer about problems or

conditions you do not understand.

Recognize Safety Symbols, Words,

Labels

ImportnntSnfet¥Instructions

1. Read all instructions before using the appliance.

2. To avoid the possibility of fire or explosion:

a. Do not dry items that have been previously

cleaned in, washed in, soaked in, or spotted

with gasoline, dry-cleaning solvents, other

flammable or explosive substances as they give

off vapors that could ignite or explode. Any

material on which you have used a cleaning

solvent, or which is saturated with flammable

liquids or solids, should not be placed in the

dryer, until all traces of these flammable liquids

or solids and their fumes have been removed.

There are many highly flammable items used in

homes, such as: acetone, denatured alcohol,

gasoline, kerosene, some liquid household

cleaners, some spot removers, turpentine, waxes

and wax removers.

b. Items containing foam rubber (may be labeled

latex foam) or similarly textured rubber-like

materials must not be dried on a heat setting.

Foam rubber materials when heated, can under

certain circumstances produce fire by

spontaneous combustion.

3. Do not allow children or pets to play on, in, or in

front of the appliance. Close supervision is

necessary when the appliance is used near

children and pets.

/4. Before the appliance is removed from service or

discarded, remove the door to the drying

compartment.

5. Do not reach into the appliance if the drum is

moving.

6. Do not install or store this appliance where it will

be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance

or attempt any servicing unless specifically

recommended in published user-repair instructions

that you understand and have the skills to carry out.

9. Do not use fabric softeners or products to

eliminate static unless recommended for dryer use

10.

11.

12.

13.

by the manufacturer of the fabric softener or

product.

Clean the lint screen before or after each load.

Keep the area around the exhaust opening and

surrounding areas free from lint accumulation, dust

and dirt.

The interior of the dryer and exhaust duct should be

cleaned periodically by qualified service personnel.

This appliance must be properly grounded. Never

plug the appliance cord into a receptacle which is

not grounded adequately and in accordance with

local and national codes. See installation

instructions for grounding this appliance.

1/4. Do not sit on top of the clothes dryer.

Important Safety

Notice & Warning

The California Safe Drinking Water and Toxic

Enforcement Act of 1986 (Proposition 65) requires the

Governor of California to publish a list of substances

known to the State of California to cause cancer or

reproductive harm, and requires businesses to warn

customers of potential exposures to such substances.

Users of this appliance are hereby warned that the

burning of gas can result in low-level exposure to

some of the listed substances, including benzene,

formaldehyde, and soot, due primarily to the

incomplete combustion of natural gas or liquid

petroleum (LP) fuels. Exhaust ducts should be kept

free of obstructions and properly exhausted dryers will

minimize exposure.

Note: Because of continuing product

improvements, Maytag reserves the right to change

specifications without notice. For complete details,

see the Installation Instructions packed with your

product before selecting cabinetry, making cutouts

or beginning installation.

SAVE THESE INSTRUCTIONS

UsingtheControls-AutoDryModels

Select Temperature

In order to select the correct temperature, turn the

Temperature control to one of four choices; Regular,

Medium (select models], Delicate or Air Fluff.

Regular Sturdy cottons or labels marked

Tumble Dry.

Medium For wrinkle-free/permanent press

(select models] synthetics, lightweight cottons

labeled Tumble Dry Medium.

Delicate For heat sensitive items labeled

Tumble Dry Low or Tumble Dry

Medium.

Air Fluff Items which need freshening.

Load tumbles with room

temperature air. Use the Time

Dry/Air Fluff cycle.

Select Options

Extended Tumble Cselect models)

Extended Tumble is provided to minimize wrinkles in

the Auto Dry Wrinkle Control cycle. This feature

provides an extra 60 minutes of unheated tumble

action at the end of the cycle. Clothes can be removed

any time during this portion of the cycle.

The additional 60 minutes of unheated tumbling can

be canceled by turning the switch to Off.

End of Cycle Signal

When the cycle is complete, a signal will sound. On

select models, the End of Cycle Signal can be turned

down or Off.

Remove load immediately to reduce wrinkling.

Temperature

Delicate

Air Fluff

r_eavy Duty / SuperSIze Capac [y / Quiet Sedes 10

Select Cycle

To select a cycle, rotate the control dial to the desired

setting. When using an Auto Dry cycle, the control dial

should point between More Dry and Less Dry for most

loads.

Loads of larger or bulkier size may require the More

Dry setting to completely dry the load. The Less Dry

setting is best suited for lightweight fabrics or for

leaving some moisture in the clothing at the end of the

cycle.

Auto Dry Regular

The Auto Dry Regular cycle is designed to dry most

cottons and linens. At the end of the cycle, the clothes

are cooled for approximately 10 minutes to reduce

wrinkling.

Auto Dry Wrinkle Control

The Auto Dry Wrinkle Control cycle is designed to dry

wrinkle-free cottons, synthetic fabrics, double knits and

permanent press fabrics automatically. At the end of

the cycle, the clothes are cooled for approximately 25

minutes to reduce wrinkling. If the load is not removed

from the dryer and Extended Tumble (select models]

has been selected, the cycle will advance to Extended

Tumble which provides additional unheated tumbling

time. (See Step 2].

Signd

Less Dry Auto Dry

Auto Dry Normal Dry Off SC

Mo_eD_ Wrinkle Co ntrol

Regular 4o

30 Extended Tumble

Time Dry

/ tocy4_ Air Fluff

off

40 70

50 6(

Push to Start

_'_off

lOG

Extended

80 Tumble

.... /

Cycles and options may vary by modeL

Time Dry/Air Fluff

This cycle can be used to regulate the drying time. Use

with Air Fluff, Delicate, Medium (select models) or

Regular temperature settings. For timed drying, turn

the control dial until the pointer points to the proper

time setting in the Time Dry/Air Fluff cycle.

I Note: Using the Air Fluff temperature setting will

require a longer drying time.

Damp Dry (select models)

Damp Dry is located on the Time Dry/Air Fluff section

of the dial. It is designed to partially dry items and can

be used with any temperature selection. Damp Dry will

provide 20 minutes of tumbling time, followed by

10 minutes of cool-down tumbling.

Push the Control Dial in

to Start

Push the control dial in to start the dryer. The dryer

door must be closed for the dryer to start.

Note: The dial can be turned in either direction to

select a cycle. Once started, the dial will not

advance at a specific rate during the Auto Dry

cycles. At first the dial may not advance at all.

Toward the end of the cycle (when the load begins

to dry), the dial will advance at a more regular rate

and much more quickly. This is normal operation.

UsingtheControls-SensorModels

Select Temperature

In order to select the correct temperature, turn the

Temperature control to one of four choices; Regular,

Medium, Low or Air Fluff.

Regular Sturdy cottons or labels marked

Tumble Dry.

Medium For wrinkle-free/permanent press

synthetics, lightweight cottons or

items labeled Tumble Dry Medium.

Low For heat sensitive items labeled

Tumble Dry Low or Tumble Dry

Medium.

Air Fluff Items which need freshening.

Load tumbles with room

temperature air. Use the Time

Dry/Air Fluff cycle.

Select Options

Extended Tumble

Extended Tumble is provided to minimize wrinkles in

the Sensor Wrinkle Control cycle. This feature provides

an extra 60 minutes of unheated tumble action at the

end of the cycle. Clothes can be removed any time

during this portion of the cycle.

The additional 60 minutes of unheated tumbling can

be canceled by turning the knob to Off or opening the

door.

End of Cycle Chime

When the cycle is complete, a chime will sound. The

End of Cycle Chime can be turned off by turning the

selector knob to Off.

Remove load immediately to reduce wrinkling.

Temperature

Chime

lOW M_dJU[/1

A[_"Fluff

Commercial Ouality Stainless Steel Tumbler t Sup

Select Cycle

To select a cycle, rotate the control dial to the desired

setting. When using a Sensor Wrinkle Control cycle, the

control dial should point between More Dry and Less

Dry for most loads.

Loads of larger or bulkier size may require the More

Dry setting to completely dry the load. The Less Dry

setting is best suited for lightweight fabrics or for

leaving some moisture in the clothing at the end of the

cycle.

Sensor Regular

The Sensor Regular cycle is designed to dry most

cottons and linens. At the end of the cycle, the clothes

are cooled to reduce wrinkling.

Sensor Wrinkle Control

The Sensor Wrinkle Control cycle is designed to dry

wrinkle-free cottons, synthetic fabrics, double knits and

permanent press fabrics automatically. At the end of

the cycle, the clothes are cooled. If the load is not

removed from the dryer and Extended Tumble has

been selected, the cycle will advance to Extended

Tumble which provides additional unheated tumbling

time. (See Step 2).

Extended Tumble

rSize Capacity / Quiet SerBes100 / 12 Cvdes

_essDr_ Sensor

Sensor Wrinkle Control

Re_.ular _

Off 3o Extended Tumble

Cool Down

Time Dry _° _'°

Air Fluff Pushtos_

........ /

Cycles and options may vary by model

Time Dry/Air Fluff

This cycle can be used to regulate the drying time. Use

with Air Fluff, Low, Medium or Regular temperature

settings. For timed drying, turn the control dial until the

pointer points to the proper time setting in the Time

Dry/Air Fluff cycle.

Note: Using the Air Fluff temperature setting will

require a longer drying time.

Damp Dry (select models)

Damp Dry is located on the Time Dry/Air Fluff section

of the dial. It is designed to partially dry items and can

be used with any temperature selection. Damp Dry will

provide 20 minutes of tumbling time, followed by

10 minutes of cool-down tumbling.

Push the Control Dial in

to Start

Push the control dial in to start the dryer. The dryer

door must be closed for the dryer to start.

Note: The dial can be turned in either direction to

select a cycle. Once started, the dial will not

advance at a specific rate during the Sensor cycles.

At first the dial may not advance at all. Toward the

end of the cycle (when the load begins to dry), the

dial will advance at a more regular rate and much

more quickly. This is normal operation.

UsingtheControls-|lectronicControls

Select Temperature

Auto Temp [preferred setting)

When Auto Temp is selected, the dryer will

automatically select the most appropriate drying

temperature based on the cycle and dryness settings

selected.

If you prefer not to use Auto Temp. turn the

temperature selector knob to the desired setting.

Regular Sturdy cottons or labels marked

Tumble Dry.

Medium For wrinkle-free/permanent press

synthetics, lightweight cottons or

items labeled Tumble Dry Medium.

Low For heat sensitive items labeled

Tumble Dry Low or Tumble Dry

Medium.

Air Fluff Items which need freshening.

Load tumbles with room

temperature air. Use the Time

Dry/Air Fluff cycle.

Select Options [if desired)

End of Cycle Chime

When the cycle is complete, an audible chime will

sound. The chime will sound intermittently during

Wrinkle Prevent. On select models, the volume of the

chime can be adjusted. To turn the Chime off, turn the

Chime selector knob to Off.

Wrinkle Prevent

Wrinkle Prevent provides approximately 95 minutes of

intermittent tumbling in unheated air at the end of the

cycle to reduce wrinkling. Set the Wrinkle Prevent

switch On to activate this feature (select models).

Some models automatically provide 30 minutes of

Wrinkle Prevent at the end of the Wrinkle Control cycle

only.

Temperature

Medium

Requ_ar

Auto TemD

Chime

Off On

Commercial Ouall_y Stainless Steel Tumbler ] SuoerS

Select Dryness Setting

To select the dryness level, turn the Dryness Settings

knob to the desired setting.

Most loads will use the Normal dry setting. Loads of

larger or bulkier size may require the More dry setting

to completely dry the load.

The Less dry setting is best suited for lightweight

fabrics or for leaving some moisture in the load at the

end of the cycle. Damp dry is designed to partially dry

items. Use for items that lay flat or hang to dry.

Select Cycle

To select a cycle, rotate the cycle selector dial to the

desired cycle. The indicator light by the cycle name will

illuminate.

The dryer cycles are Sensor Dry cycles. Sensor Dry

automatically senses the moisture in the load and

shuts the dryer off when the selected dryness level

(Damp dry to More dry) is reached.

FabricSelection

DrynessSettings sensorDry

Jeans

Less Normal

_ Wdnk[e Control

_More

De[icates c

Regular

Refresh

6o Time Dry

50 Air Fluff

ii 20

Power

Off

_eCapadty Ouiet Sedes 200 / 12 Cvdes

Dryinq Pause

"__LyQe Status Push to Stale - Push to Stoo

Off

Wrinkle

Prevent

.... /

Cycles and options may vary by model.

Refresh (select models)

Delicates

The Refresh cycle is designed to release wrinkles from

items that are clean and dry but only slightly wrinkled,

such as from a crowded closet or suitcase or from

sitting in the dryer too long after the cycle has ended.

Refresh can be used with any temperature selection.

Note: If the dryer detects moisture in the load when

Refresh is selected, the dryer will automatically switch

to the Wrinkle Control cycle which may extend the

cyc e time.

Regular

The Regular cycle is designed to dry loads such as

towels and underwear.

The Delicates cycle is designed to dry heat-sensitive

items at the low drying temperature.

Time Dry/Air Fluff

The Time Dry cycle can be used to regulate the drying

time. Use with any temperature setting. For timed

drying, turn the cycle selector dial to the number of

minutes desired. An indicator light will illuminate by

the setting.

Note: Using the Air Fluff temperature setting will I

require a longer drying time.

Jeans (select models)

The Jeans cycle is designed to reduce wrinkling and

tangling in loads of jeans.

Wrinkle Control

The Wrinkle Control cycle is designed to dry wrinkle-

free cottons, synthetic fabrics, knits and permanent

press fabrics automatically.

Select models will automatically advance into Wrinkle

Prevent which provides an extra 30 minutes of

unheated tumble action at the end of the cycle.

Start the Dryer

After setting the cycle and desired options, press the

cycle selector dial to start the dryer. To pause the

cycle, press cycle selector dial again or by opening

the door. To restart the cycle, press cycle selector dial

and cycle will resume from the point of interruption.

Power Off

Turn the cycle selector dial to Power Off to cancel

the cycle and stop the dryer.

On dryer models with optional Wrinkle Prevent, the

additional 95 minutes of unheated tumbling can be

canceled by turning the switch to Off or by opening

the door.

UsingtheControls-ElectronicControls

Features

Cycle Status Lights

The Drying light will illuminate and remain lit until the

dryer enters the cool down portion of the cycle. When

the dryer is in the cool down portion of the cycle, the

Cool Down light will illuminate.

The Wrinkle Prevent and Complete light will illuminate

when the dryer has moved into the Wrinkle Prevent

portion of the cycle. On some models, Wrinkle Prevent

will automatically follow the Wrinkle Control cycle.

The Complete light will illuminate when the cycle is

complete. The light will remain illuminated until the

dryer door is opened or selector dial is moved.

If the dryer is paused during a cycle, the Pause light

will illuminate until the cycle is resumed or the dryer is

turned off.

OperutingTips

Clean the Lint Filter

• After each load.

• To shorten drying time.

• To operate more energy efficiently.

i Note: Do not operate the dryer without the lint

filter in place.

Load the Dryer Properly

• Place only one washload in the dryer at a time.

• Mixed loads of heavy and lightweight clothes will dry

differently. Lightweight clothes will dry, while heavy

clothes may be damp.

• Add one or more similar items to the dryer when only

one or two articles need drying. This improves the

tumbling action and drying efficiency.

• Overloading restricts tumbling action, resulting in

uneven drying as well as excessive wrinkling of some

fabrics.

• When drying large, bulky items such as a blanket or

comforter, it may be necessary to reposition the load

during the cycle to ensure even drying.

[]

Accessories

Optional Drying Rack

Select dryer models are equipped with a drying rack.

The drying rack is useful for drying items that require

no tumble drying, such as tennis shoes, sweaters,

stuffed toys or other delicate items.

Note: The Drying Rack, part no. 504105, is

available when not included with your dryer. See

your dealer or call 1-877-232-6771 to order.

Care& Cleaning

Control Panel

Clean with a soft, damp cloth. Do not use abrasive

substances.

Tumbler

Remove any stains such as crayon, ink pen or fabric

dye from new items (such as towels or jeans) with an

all-purpose cleaner. Then tumble old towels or rags to

remove any excess stain or cleaning substance. Once

these steps are done, stains may still be visible, but

should not transfer to subsequent loads.

Cabinet

Wipe off any marks with soap and water. Use an

appliance wax once a year if desired.

Dryer Exhaust System

Inspect and clean once a year to maintain optimum

performance. The outside exhaust hood should be

cleaned more frequently to ensure proper operation.

(Refer to the Installation Instructions for more

information.)

Special Laundry Tips

Please follow the care label or manufacturer's instructions for drying special items. If care label instructions are not

available, use the following information as a guide.

Bedspreads and • Follow the care label instructions or dry on the Regular cycle.

Comforters • Be sure the item is thoroughly dry before using or storing.

• May require repositioning to ensure even drying.

Blankets • Dry only one blanket at a time for best tumbling action.

• Be sure the item is thoroughly dry before using or storing.

• Select the Wrinkle Control cycle to help minimize wrinkling.

• Dry in small loads for best results and remove as soon as possible.

• Select the Regular cycle for soft, fluffy diapers.

• Select the Regular cycle and a Delicate temperature setting.

• Place a clean pair of sneakers in the dryer with the item to fluff the down comforters, etc.

Adding a couple of dry towels shortens dry time and absorbs moisture.

Curtains and

Draperies

Cloth Diapers

Down-Filled

Items Oackets,

sleeping bags,

comforters, etc._)

Foam Rubber

(rug hacks,

stuffed toys,

certain shoulder

pads, etc.)

Pillows

Plastics

(shower curtains,

outdoor furniture

covers, etc.)

• Do not dry on a heat setting. Select the Time Dry/Air Fluff (no-heat) cycle.

• ,_ WARNING - Drying a rubber item with heat may damage it or be a fire hazard.

• Do not dryer-dry kapok or foam pillows.

• Select the Regular cycle.

• Add a couple of dry towels and a pair of clean sneakers to help the tumbling action and

to fluff the item.

• Select the Time Dry/Air Fluff cycle on a Delicate or Air Fluff temperature depending on

the care label instructions.

ReversingtheDoor

Reversing the Door

Follow these steps to reverse the door:

1. Remove four hinge-attaching screws.

2. Remove all nine screws from door and hinges.

3. Pull bottom of door liner out (A), then pull down

(B), removing door liner from door panel.

4. Rotate door panel 180° as shown.

5. Remove door strike from door liner and reinstall on

opposite side.

6. Insert liner under flange on bottom of door (A),

then push top of door liner into place (B).

7. Reinstall nine screws removed in Step 2.

8. Using screwdriver, remove two door plugs and

reinstall on opposite side of door opening.

9. Reinstall four hinge attaching screws removed in

Step 1.

DryerExhnustTips

Do DON'T

Let a poor exhaust system

cause slow drying.

Let your dryer exhaust

the air easily.

DON'T

Restrict your dryer with a

poor exhaust system.

Use 4 inch

diameter rigid

metal duct. Tape all

joints, including at the dryen

Never use lint-trappingscrews.

DON'T

Use plastic, thin foil, or

non-metal flexible duct.

Keep duct runs as straight

as possible.

El I i

DON'T ( I I I

Use longer than necessary

duct runs with many

elbows.

Do [

Clean all old ducts before installing

your new dryer. Be sure vent flap

opens and closes freely. Inspect

and clean the exhaust system

annually.

DON'T

Allow crushed or clogged

ducts and vent.

Troubleshooting

Doesn't Run

Doesn't Heat

Doesn't Dry

Properly

Is Noisy

Control Knob

Advances

Slowly

[select models)

Dries Unevenly

• Be sure the door is shut.

• Check to make sure the electrical cord is plugged in.

• Check fuse or reset circuit breaker.

• Push the control dial in again if the door was opened during the cycle.

• Check fuse or reset circuit breaker.

• Select a heat setting, not air fluff.

• Check that the gas supply is on for gas dryers.

• Clean the lint filter and exhaust duct.

• Dryer timer may have moved into the cool-down portion of the cycle.

Check all of the above, plus...

• Check the exhaust hood outside the house, make sure it opens and closes freely.

• Check exhaust system for lint buildup. Ducting should be inspected and cleaned annually.

• Use rigid 4" metal exhaust duct.

• Do not overload. 1 wash load = 1 dryer load.

• Sort heavy items from lightweight items.

• Large, bulky items like blankets or comforters may require repositioning to ensure even

drying.

• Check the washer to be sure it is draining properly to extract water from the load.

• Clothes load is too small to tumble properly. Add a few towels.

• Check the load for objects such as coins, nails, etc. Remove promptly from dryer.

• It is normal to hear the dryer gas valve or heating element cycle on and off during the

drying cycle.

• The dryer should be level and installed on a solid floor.

• A clicking noise may be the timer advancing.

• It is normal for the dryer to hum due to the high velocity of air moving through the dryer

drum and exhaust system.

This is normal operation for an Auto Dry or Sensor cycle, especially at the beginning of

cycle. Once the load begins to dry, the control knob will start to advance. The rate of

advancement will be slow at the beginning of the cycle because there is more moisture in

the load. As the load becomes more dry, the control knob will advance more quickly.

Seams, pockets and other similar heavy areas may not be completely dry when the rest of

the load has reached the selected dryness level. This is normal. Select the More Dry

setting if desired.

If one heavy item is dried with a lightweight load, such as one towel with sheets, it is

possible that the heavy item will not be completely dry when the rest of the load has

reached the selected dryness level. Sort heavy items from lightweight items for best drying

results.

Has an Odor • Household odors such as from painting, varnishing, strong cleaners, etc. may enter the

dryer with the surrounding room air. This is normal as the dryer draws the air from the

room, heats it, pulls it through the tumbler and exhausts it to the outside. When these

odors are present in the air, ventilate the room completely before using the dryer.

Service& Wurru,t¥

CUSTOMER'S SOLE AND EXCLUSIVE

REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR

AS PROVIDED HEREIN. IMPLIED

WARRANTIES, INCLUDING WARRANTIES

OF MERCHANTABILITY OR FITNESSFOR

A PARTICULAR PURPOSE,ARE LIMITED

TO ONE YEAR ORTHE SHORTEST

PERIOD ALLOWED BY LAW. MAYTAG

CORPORATION SHALL NOT BE LIABLE

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES. SOME STATESAND

PROVINCES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL

DAMAGES, OR LIMITATIONS ON THE

DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS,SO

THESE EXCLUSIONS OR LIMITATIONS

MAY NOT APPLY TOYOU. THIS

WARRANTY GIVESYOU SPECIFIC LEGAL

RIGHTS AND YOU MAY ALSO HAVE

OTHER RIGHTS,WHICH VARY STATETO

STATEOR PROVINCE TO PROVINCE.

What is Not Covered By These Warranties

1. Conditions and damages resulting from any of the following:

a. Improper installation, delivery, or maintenance.

b. Any repair, modification, alteration, or adjustment not authorized by the

manufacturer or an authorized servicer.

c. Misuse, abuse, accidents, unreasonable use, or acts of God.

d. Incorrect electric current, voltage, electrical and/or gas supply.

e. Improper setting of any control.

2. Warranties are void if the original serial numbers [lave been removed, altered,

or cannot be readily determined.

3. Light bulbs, water filters and air filters.

4. Products purchased for commercial or industrial use.

5. Tile cost of service or service call to:

a. Correct installation errors. For products requiring ventilation, rigid metal

ducting must be used.

b. Instruct the user on the proper use of the product.

c. Transport tile appliance to and from the servicer.

6. Any food loss due to refrigerator or freezer product failures.

7. Expenses for travel and transportation for product service in remote locations.

8. Outside of tile United States and Canada this warranty does not apply.

Contact your dealer to determine if another warranty applies.

9. Consequential or incidental damages sustained by any person as a result of

any breach of these warranties. Some states do not allow the exclusion or

limitation of consequential or incidental damages, so the above exclusion may

not apply.

If You Need Service

First see the Troubleshooting section in your Use and Care Guide or call the

dealer from whom your appliance was purchased or call Maytag Services, LLC,

Customer Assistance at 1-800-688-9900 USA and 1-800-688-2002 Canada to

locate an authorized servicer.

Be sure to retain proof of purchase to verify warranty status. Referto WARRANTY

for further information on owner's responsibilities for warranty service.

If the dealer or service company cannot resolve the problem, write to Maytag

Services, LLC,Attn: CAIR_ Center, P.O.Box 2370,Cleveland,TN 37320-2370,or call

1-800-688-9900 USA and 1-800-688-2002 Canada. U.S.customers using

TTY for deaf, hearing impaired or speech impaired,call 1-800-688-2080.

User'sguides, service manualsand parts information are available from Maytag

Services, LLC,Customer Assistance.

Notes: When writing or calling about a service problem, please include:

a. Your name, address and telephone number;

b. Model number and serial number;

c. Name and address of your dealer or servicer;

d. A clear description of the problem you are [laving;

e. Proof of purchase (sales receipt).

M_ Y AG

MD-1

Table des mati_res

Importantes consignes

de s6curit6 ............... 17-18

Utilisation des commandes

ModUles & s6chage automatique ...19-20

ModUles avec capteur ............ 21-22

Commandes 61ectroniques ........ 23-25

Fonctionnement .............. 26

Inversion de porte ........... 28

Conseils pour 1'6vacuation

de I'air ..................... 29

Recherche des pannes ........ 30

Accessoires ................ 26

Nettoyage et entretien ........ 27

Garantie et service

apr_s-vente ................. 31

Guia de uso y cuidado ....... 32

Importnntesconsignesdesecurit6

Ce qu'il faut savoir _ propos

des consignes de s_curitd

Les consignes de securite et les mises en garde presentees

dans ce guide ne couvrent pas toutes les situations

possibles. Faire preuve de jugement, de prudence et

d'attention Iors de I'installation, de I'entretien et de

rutilisation de I'appareil.

Lorsque survient un probleme ou une situation inhabituelle,

toujours communiquer avec le fabricant.

Reconnaissez les _tiquettes, phrases

ou symboles sur la securite

Importnntesconsignesdesecurit6

1. Lire toutes les instructions avant d'utiliser I'appareil.

2. Pour eviter les risques d'incendie ou d'explosion :

a. Ne pas secher d'articles qui ont auparavant ete

nettoyes ou laves a I'aide d'essence, de solvants de

nettoyage a sec ou d'autres produits explosifs ou

inflammables, ou qui en sont imbibes ou eclabousses,

car ces substances produisent des vapeurs qui

peuvent s'enflammer ou exploser. Tout tissu sur lequel

des solvants de nettoyage ont ete utilises ou qui sont

satures de liquides ou solides inflammables ne doit

pas etre mis dans la secheuse avant que toute trace

et toute vapeur de ces liquides ou solides ne soient

completement eliminees. De nombreux produits

extremement inflammables sont communement

utilises a la maison, entre autres racetone, I'alcool

denature, ressence, le kerosene, certains produits de

nettoyage menagers, les detachants, la terebenthine,

les cires et les decapants de cire.

b. Les articles contenant du caoutchouc mousse

(l'etiquette indique parfois : mousse de latex) ou tout

materiau de texture similaire ne doivent pas etre

seches sur un cycle utilisant de I'air chaud. Lorsqu'ils

sont exposes a la chaleur, ces materiaux peuvent,

dans certaines conditions, s'enflammer par un

phenomene de combustion spontanee.

3. Ne pas permettre aux enfants ou aux animaux familiers

de jouer sur I'appareil, a I'interieur ou en face de celui-ci.

Une supervision etroite est necessaire Iorsque I'appareil

est utilise a proximite d'enfants ou d'animaux familiers.

4. Avant de mettre rappareil hors service ou au rebut,

retirer la porte du compartiment de sechage.

5. Ne pas mettre la main ou le bras dans rappareil si le

tambour est en mouvement.

6. Ne pas installer ou remiser I'appareil dans un endroit or)

il est expose aux intemperies.

7. Ne pas modifier les mecanismes de commande.

8. Ne pas reparer ou remplacer une piece de rappareil ou

proceder a un depannage, saul si les instructions

publiees le recommandent et que la personne effectuant

la reparation les comprend et possede les connaissances

voulues pour les executer.

9. Ne pas utiliser d'assouplissant textile ni de produit visant

reduire I'electricite statique saul si le fabricant de ces

produits recommande leur usage dans la secheuse.

10. Nettoyer le filtre a charpie avant et apres chaque utilisation.

11. I_viterraccumulation de charpie, de poussiere et de

salete directement autour du conduit d'evacuation et

dans toute la zone environnante.

12. Faire nettoyer regulierement I'interieur de la secheuse et

du conduit d'evacuation par des techniciens qualifies.

13. Cet appareil doit etre correctement mis a la terre. Ne

jamais brancher le c_ble electrique de I'appareil sur une

prise murale non mise a la terre conformement aux

codes Iocaux et nationaux. Voir les instructions

d'installation pour la mise a la terre de cet appareil.

14. Ne pas s'asseoir sur la secheuse.

Mesures de s curitd

importantes

En application de la Ioi californienne concernant la salubrite

de I'eau et la protection contre les substances chimiques

California Safe Drinking Water and Toxic Enforcement Act de

1986 (Proposition 65), le gouverneur de Californie est tenu de

publier une liste des substances reconnues par I'etat de

Californie comme etant cancerigenes ou pouvant etre cause

d'infertilite, et les commerces et industries sont tenus

d'avertir les consommateurs des risques potentiels

d'exposition a de telles substances.

Enconsequence, les utilisateursde rappareil sont avertisque la

combustion de gaz peut entrainer une faible exposition

certaines dessubstances nomenclaturees par I'etat deCalifornie,

dont le benzene,le formaldehydeet lasuie, principalementen

raisond'une combustion incomplete de gaz naturel ou de gazde

petrole liqudie (GPL).Lesconduits d'evacuation ne doivent pas

etre obstrueset rexposition a cos substances peut etre reduite

en assurant une evacuationd'air adequate.

Remarque: En raison des am61iorations apport6es

r6gulierement _ ses produits, Maytag se r6serve le droit

de modifier les sp6cifications sans pr_avis. Pour de plus

amples renseignements, consulter les instructions

d'installation incluses avec votre appareil avant de choisir

des meubles de rangement, de faire du d6coupage ou de

commencer I'installation.

CONSERVER CES INSTRUCTIONS

Utilisutiondescommundes- Modeles

S lection de la temperature

Afin de selectionner la temperature adequate, tourner le

selecteur de temperature a rune des trois positions suivantes :

Regular (ordinaire), Medium (moyen, certains modeles)

Delicate (delicat) ou Air Fluff [gonflant).

Regular

Normal

Medium

iVloyen

(certains

modeles)

Delicate

Delicat

Air Fluff

Gonflant

Coton resistant ou etiquettes marquees

Sechable en secheuse.

Pour les tissus synthetiques infroissables/a pli

permanent, les cotons legers dont I'etiquette

indique secher en secheuse a temperature

moyenne.

Pour les articles qui ne supportent pas la

chaleur dont I'etiquette indique Secher en

secheuse a temperature douce ou Secher en

secheuse a temperature moyenne.

Articles devant etre rafraichis. Le linge seche

la temperature ambiante. Choisissez le cycle

de sechage minute/gonflant.

S lection des options

Extended Tumble (culbutage prolonge,

certains modbles)

Cette option permet de reduire le froissement au minimum

Iorsque le cycle Auto Dry Wrinkle Control est selectionn& Le

linge continue a culbuter a froid pendant 60 minutes a lafin

du cycle. On peut enlever le linge a tout moment de cette

portion du cycle.

II est possible d'annuler les 60 minutes supplementaires de

culbutage a froid en mettant le selecteur sur Off (arret).

End of Cycle Signal

(signal de fin de cycle)

Une lois le cycle termine, la secheuse produit un signal

sonore. Sur certains modeles, le signal sonore peut etre

baisse ou Off.

Enlever le linge immediatement pour reduire le froissement.

Temperature

Delicate

Air Fluff _'_

_teavy Duty / SuperSize Capacity / Quiet Series 10

S lection du cycle

Pour selectionner un cycle, tourner le selecteur au reglage

desire. L'utilisation d'un cycle de Auto Dry [sechage

automatique) signifie que le selecteur doit pointer entre More

Dry (plus sec] et Less Dry [moins sec] pour la plupart des

charges.

Les plus grosses charges necessitent parfois le reglage

More Dry pour secher completement. II est preferable de

secher le linge au reglage Less Dry Iorsque les tissus sont

plus legers ou que le linge doit rester legerement humide

la fin du cycle.

Auto Dry Regular (sechage automatique

des tissus ordinaires)

Le cycle de sechage automatique ordinaire est con_u pour

secher la plupart des articles en coton et le linge de maison.

,&,la fin du cycle, les vetements refroidissent pendant environ

10 minutes pour reduire les faux plis.

Auto Dry Wrinkle Control (antifroissement

sechage automatique)

Ce cycle est prevu pour le sechage automatique des cotons,

tissus synthetiques, tricots doubles et autres tissus

infroissables. A la fin du cycle, les vetements sont refroidis

pendant 25 minutes environ pour reduire les faux plis. Si la

charge n'est pas enlevee de la secheuse et qu'un Extended

Tumble (culbutage prolonge, certains modeles) a ete choisi,

le cycle avance jusqu'a Culbutage prolonge pour un

supplement de culbutage sans chaleur (voir etape 2).

La page charge ...

Maytag MDG2706AWW Le manuel du propriétaire

Marque: Maytag

Modèle: MDG2706AWW

Catégorie: Sèche-linge électriques

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MDG2706AWW Owner's manual
español: Maytag MDG2706AWW El manual del propietario

Maytag MDG2706AWW Le manuel du propriétaire

Maytag MDG2706AWW Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents