brondell FreshSpa easy bidet Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

Owners Manual FS-10/FreshSpa
Table of Contents
Product Features ................Page 2
Parts List ........................Page 3
Conguration ...................Page 4
Installation .....................Page 5
Operation ......................Page 9
Maintenance ....................Page 10
Warranty .......................Page 11
Contact .........................Page 13
FreshSpa Feature List:
Hygienic retractable nozzle
Self cleaning nozzle feature
Ambient temperature bidet wash
Nozzle positioning (3 settings)
Adjustable water pressure
All brass internal valve
High quality metal 7/8” T-valve
High quality braided metal hose
Anti-bacterial ABS material with full body panel
Backow prevention valve
No electricity or batteries required
Easy installation and adjustable toilet t
All accessories included for standard installation
1 year warranty
2
Parts List
3
1 ea small rubber washer
Bidet attachment
with turn dial control
Adjustable brackets
T-valve connector Bidet hose
2 ea large rubber washers
1 ea small rubber
washer with raised lip
4
Conguration
5
Installation
Before Installation:
Check Water Supply Line: Check the water supply line that
connects the toilet tank ll valve to the water shuto valve at
the wall. If it is a rigid pipe, you will need to purchase a exible
water supply hose to replace it before installing the FreshSpa.
The length of the hose may vary and the top connection size
should be 7/8” Ballcock to connect to the T-valve that you will
install under the toilet tank and the bottom connection will vary
(most common are 3/8” and1/2”female compression).
1) Remove existing toilet seat
a. Lift hinge covers and use athead or Phillips head screwdriver
to remove the mounting bolts. Alternatively, you may need to
loosen mounting bolts underneath the seat.
b. Remove the toilet seat and set the seat, mounting bolts and
hardware aside.
2) Turn o water supply valve and
ush toilet
a. Turn o water supply at the wall to
stop ow of water.
b. Flush toilet and hold down handle
to completely empty toilet tank.
c. Disconnect water supply hose from
the ll valve under the toilet tank.
3) Connect 7/8” T-Valve to Water
Supply Line and Fill Valve Under
Toilet Tank.
a.Install the 7/8” T-valve with the
small rubber washer with raised lip
to the incoming water connection on
the bottom of your toilet tank. Be sure
to place the at edge of the rubber
washer into the T-Valve against the
metal with the raised lip facing the
toilet tank connection.
b. Connect the cold water supply line
coming from the wall to the bottom
of the T-valve using the small at
rubber washer (if needed).
Step 2a
Installation
6
Step 2c
Step 3a & 3b
4) Connect Bidet Hose to T-Valve
a. Connect one end of the metal Bidet
Hose to the remaining open side of
the installed 7/8” T-valve.
5) Install Bidet Attachment on Toilet
a. Place large rubber washers over the
open bolt holes in the toilet xture.
b. Place bidet attachment over
washers so the nozzle is as close to
the back of the toilet bowl as it will go.
This will vary by toilet.
c. Make sure the adjustable brackets
line up with the holes in the toilet
xture. You may need to move the
adjustable brackets accordingly to
line up properly.
d. Replace the toilet seat on top of
bidet attachment and secure using
original toilet seat hardware. Make
sure to tighten so that the bidet
attachment and seat do not move.
Step 5
Installation
7
6) Connect Bidet Hose to Bidet Attachment
a. Connect open end of bidet hose to the
brass connection on the bottom side of
the bidet attachment.
7) Turn on Water Supply & Check for Leaks
a. Open the main water supply valve slowly and check for
leaks.
b. Wait 5-10 minutes, check again and if there are no leaks
continue.
Note: if there is any leaking, check all rubber washers and make
sure all water connections are tight and secure. If necessary,
you can use plumbers tape for any leaking connections.
Installation
Step 6a
8
Operation
Using the FreshSpa
To clean the bidet nozzle, turn the control dial towards the “Nozzle
Cleaning” position and water should wash over the nozzle.
For the general bidet wash function, turn the dial towards the
Wash” position.
The further the dial is turned, the higher the water pressure will be.
To lower the water pressure, turn the nozzle back towards the center.
For a front wash function, women may need to tilt & bend forward
slightly in order for the spray to hit the appropriate areas.
1
2
3
Nozzle positioning
There are 3 dierent nozzle
positions that you can easily
adjust by gently pulling the
end of the nozzle forward
or backwards. Once desired
position is set, the nozzle will
remain in that position until
manually moved.
9
Maintenance
To clean the nozzle, gently pull down on the head of the nozzle, and
use a toothbrush or soft cloth and mild detergent (such as dish soap)
to clean the nozzles. You may also unscrew the nozzle tip cap for a
more thorough cleaning or use a toothpick if any nozzle holes are
plugged with hard water buildup.
To clean the bidet, use a mild cleaner such as Simple Green or Windex
spray to clean the FreshSpa. Do not scrub or use harsh, abrasive
products to clean the FreshSpa, which may scratch the product.
10
Warranty
Brondell products are backed by some of the most comprehensive warranties
in the industry. Brondell warrants that the FreshSpa shall be free from defects
in material and workmanship under normal use and service.
FreshSpa One-Year Limited Warranty
100% Coverage of all parts and labor for the entire product for the rst year
from original date of purchase
Exclusions and Limitations
1. BRONDELL warrants its products to be free from manufacturing defects under
normal use and service. This warranty is extended only to the ORIGINAL PURCHASER.
2. BRONDELLs obligations under this warranty are limited to repairs or replacement,
at BRONDELLs option, of products or parts found to be defective, provided that
such products were properly installed and used in accordance with instructions.
BRONDELL reserves the right to make such inspections as may be necessary in order
to determine the cause of the defect. BRONDELL will not charge for labor or parts in
connection with warranty repairs for the rst full year from date of purchase on all
products except those that may be subject to commercial use limitations.
3. BRONDELL is not responsible for the cost of removal, return (shipping) and/or
reinstallation of products. This warranty does NOT apply to:
Damage or loss which occurs during shipment.
Damage or loss sustained through any natural or manmade causes beyond the
control of BRONDELL, including but not limited to re, earthquake, oods, etc.
Damage or loss resulting from sediments or foreign matter contained in a water system.
Damage or loss resulting from negligent or improper installation including
installation of a unit in a harsh or hazardous environment.
Damage or loss resulting from removal, improper repair, modication of the
product, or improper maintenance including damage caused by chlorine or
chlorine related products.
Damage or loss resulting from acts which are not the fault of Brondell or which
the Product is not specied to tolerate.
11
Warranty
4. This warranty gives you specic legal rights. You may have other rights which vary
from state to state.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR
OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE
REMEDY AVAILABLE TO THE PURCHASER. BRONDELL SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, FOR
CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE PURCHASER OR FOR
LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF REPAIRS
BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES,
INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION
OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE
LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
How to Obtain Service
To obtain repair service under this warranty, you must contact an authorized
BRONDELL Service Center to obtain an RMA (Return Merchandise Authorization)
number. Proof of purchase in the form of a copy of your original receipt must
accompany the returned unit for the warranty to be valid. Take or ship the unit pre-
paid to the closest Brondell authorized service center along with your RMA number
and proof of purchase.
To obtain your RMA number and locate the BRONDELL Service Center location
nearest you, call 1-888-542-3355.
12
Contact
For questions, contact
Brondell Customer Service:
1-888-542-3355
Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
Phone: 1-888-542-3355
Web: www.brondell.com
13
Manual del propietario
Características del producto .....Página 2
Lista de piezas ..................Página 3
Conguración ..................Página 4
Instalación ......................Página 5
Funcionamiento ................Página 9
Mantenimiento .................Página 10
Garantía ........................Página 11
Contacto…………………………Página 13
bidé fácil
Lista de características:
Boquilla higiénica retráctil
Función de autolimpieza de la boquilla
Lavado de bidé a temperatura ambiente
Posicionamiento de la boquilla (3 posiciones)
Presión de agua adaptable
Válvula interna toda realizada en bronce
Válvula T de 7/8 in toda realizada en bronce
Manguera de metal trenzado de alta calidad
Material ABS antibacterial con panel completo
Válvula de no retorno
No requiere energía eléctrica ni baterías
Fácil instalación y ajustable al inodoro
Todos los accesorios para una instalación estándar incluidosño
1 año de garantía
2
Lista de piezas
3
Accesorio para el bidé
con perilla de control
Soportes ajustables
Conector de válvula T Manguera de bidé
Unión de goma
grande de 2 ea
Unión de goma
pequeña de uno
Unión de goma con
reborde pequeña de uno
Conguration
4
Asiento de
inodoro
Pernos
Bidé
Manguera
de bidé
7/8" Conector
de válvula T
Tuercas
Inodoro
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

brondell FreshSpa easy bidet Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à