Bluetti AC180P Manuel utilisateur

Marque: Bluetti

Modèle: AC180P

Taper: Manuel utilisateur

Ci-dessous, vous trouverez de brèves informations sur AC180P. Cette station d'alimentation portable offre une sortie CA de 1800 W, une batterie LiFePO4 de 1152 Wh et plusieurs ports de sortie CC, y compris USB-A, USB-C et un port allume-cigare. Elle prend en charge une entrée CA maximale de 1440 W et une entrée CC de 500 W. Elle peut être rechargée via une prise murale, des panneaux solaires, d'un port allume-cigare de voiture et d'un générateur. Il est également compatible avec l'application BLUETTI.

AC180P

Portable Power Station

User Manual

Please read this manual carefully before use and keep it for future reference.

Warning

1. Charge the unit before ﬁrst use.

2. Do not use solar panels with open circuit voltage higher than 60V. Solar input voltage range

for the unit is DC 12V~60V.

3. Charge the unit when the SoC drops below 5%. If the SoC drops to 0, power off the unit and

charge it for at least 30mins before restarting.

4. The unit is for off-grid use only. Do not connect its AC output to the grid.

5. If not used for more than 3 months, charge the unit to 40%~60% SoC and store it with the

power off. For optimum battery life, discharge and charge the unit every 3 months.

6. This product must be grounded before operation.

Connect a grounding cable (recommended 14AWG 1.5mm2/105oC/yellow-green color) to the

grounding terminal of AC180P. Fasten the grounding screw (M5*10) to ﬁx the cable.

Thank You!

Thank you for making BLUETTI a part of your family.

From the very beginning, BLUETTI has tried to stay true to a sustainable future

through green energy storage solutions for both indoor and outdoor use while

delivering an exceptional eco-friendly experience for our homes and our world.

That's why BLUETTI makes its presence in 70+ countries and is trusted by

millions of customers across the globe.

Franch

Germany

Netherlands

Safety Instructions

General Safety

Handling

Storage and Usage

What’s In The Box

Product Overview

Diagram

Speciﬁcations

Operating Instructions

Buttons

LCD Screen

Charging

Discharging

BLUETTI App

Appendix

FAQs

Troubleshooting

Abbreviations

FCC Warning

Important Instructions

Contents

1.1

1.2

1.3

3.1

3.2

4.1

4.2

4.3

4.4

4.5

5.1

5.2

5.3

5.4

5.5

1. Safety Instructions

Read this manual for instructions on the proper use and safety information for the unit.

Follow the warnings and instructions marked on the unit and its accessories.

Pay attentionto the "Instruction", "Caution", "Warning" and "Danger" symbols in this

manual, and follow theinstructions carefully to avoid injury or damage.

The Safety Requirements provided herein are for illustrative purposes that include but

are not limited to those listed in this manual. Actual operation shall comply with all

applicable safety standards.

If you have any questions, feel free to contact BLUETTI support or your local BLUETTI dealers.

1.1. General Safety

• Always operate or store the unit in the conditions speciﬁed in this manual.

• The installation and ambient conditions must comply with the regulations in the

relevant international, national or regional standards.

• Unauthorized disassembly, alteration of the equipment or modiﬁcation of the software

code is not allowed.

BLUETTI shall not be liable for the following circumstances:

• Equipment damage caused by force majeure, such as earthquake, ﬁre, storm, ﬂood,

mudslide, etc.

• Damage or loss during transportation.

• Damage caused by storage conditions that do not meet the requirements speciﬁed in

this manual.

• Damage to the hardware or data of the equipment due to customer negligence,

improper operation or intentional damage.

• Damage to the system caused by a third party or the customer, including handling

and installation that does not meet the requirements speciﬁed in this manual.

• This product is not suitable for providing electrical service for equipment and machines

that are highly dependent on the reliability of electrical power supply and that involve

personal safety, such as atomic energy, aviation, medical, etc. Poweroak will not be held

responsible for any personal safety accidents, ﬁre accidents, equipment failures, etc.

caused by using this product to supply power to the above equipment and machines.

• Damage caused by adjustment, alteration or removal of identiﬁcation marks.

To avoid danger, please regulate the operation in the following manner

• Do not install, use and maintain the unit in adverse weather conditions such as

lightning, rain, snow and strong breezes (including but not limited to handling and

operating the unit, plugging and unplugging signal connections to outdoor facilities,

working at height, outdoor installations, etc.).

JUST POWER ON 05

• The transportation, wiring and maintenance shall comply with all applicable laws,

regulations and standards.

• User-provided materials and tools required shall meet the requirements speciﬁed in

applicable laws, regulations and relevant standards.

• Always turn off the power sourcebeforestartingany electrical work.

• Do not clean the unit with water.

• Do not disassemble,modify, tamper with or repairthe unit on your own.

• Regularly inspect the unit and its accessories for damage or deterioration.

• Use a tester to check for the presence of dangerous voltage before touching any

conductor or terminal.

• If the unit’s shell is cracked during transportation or use, do not use it and contact

BLUETTI support or your local BLUETTI dealers.

• Use a dry powder extinguisher if the unit catches ﬁre.

• In case of ﬁre, EVACUATE the building or affected area immediately, activate the closest

FIRE ALARM system and CALL 9-1-1 or your local emergency phone number.

• Use genuine cables and accessories provided by BLUETTI.

• Keep the unit away from heat sources or high temperatures, and do not expose it to

direct sunlight.

• Do not store the unit with ﬂammable liquids, gases, or explosive materials.

• Make sure the area where you are using the unit is well ventilated and spacious.

• Do not block or cover the vents of the unit as this may cause irreversible damage to it.

• Use the unit for its intended purpose and avoid stacking objects on top of it during

storage or use.

• Do not move the unit during operation as the vibrations and shocks associated with

movement may cause damage to the internal hardware.

• In case of malfunction, turn off the unit immediately and contact BLUETTI support or

your local BLUETTI dealers if this manual cannot adequately explain the malfunction to

you.

• Do not place the unit on an unstable or inclined surface.

• Do not insert foreign objects into any port and vent of the unit.

• Keep away from children and pets.

• This product must be grounded before operation.

Connect a grounding cable (recommended 14AWG 1.5mm2/105oC/yellow-green

color) to the grounding terminal of AC180P. Fasten the grounding screw (M5*10) to ﬁx

the cable.

Legal and Regulatory Requirements

JUST POWER ON06

1.2.Handling

Use mechanical assistance as needed (e.g. trolleys and adjustable height workbenches).

1.3. Storage and usage

• When not using the unit for over 3 months, charge it to 40% to 60% SoC to keep it in

optimal condition.

• Before storing the unit, power it off and remove all electrical connections from it.

• Store the unit in a cool and dry place. The ideal temperature range is 1o0C to 300C. The

unit can be safely charged and discharged at temperatures of -200C to 400C. However,

it’s NOT recommended to store the unit in harsh temperatures for extended periods of

time.

• Fully cycle the unit every 6 months to maintain the battery’s health.

If the SoC drops to 0 (during operation or upon startup), take the following

actions to safely restart the unit:

1)Shut down immediately.

2)Charging within 48 hours.

3)Battery should be kept at an ambient temperature of 50C to 350C for 24 hours before

charging.

It is recommended to charge the unit via an AC source. If charging via solar energy,

ensure that your solar system provides an output of more than 100W.

BLUETTI shall not be liable for any equipment damage caused by the violation of above

instructions.

Recommended number of people based on the weight of product

Weight

<18kg

18kg~32kg

32kg~55kg

>55kg

Number of people

4 or a cart

JUST POWER ON 07

2. What’s In The Box

Item Picture Qty.

Portable Power

Station 1

AC Charging Cable

(16AWG, 1800mm) 1

Car Charging Cable

(16AWG, 720mm) 1

Solar Charging Cable

(16AWG, 1500mm) 1

Standard Packaging

User Manual 1

Grounding screw

(M5*10)

JUST POWER ON08

Cigarette Lighter to Clamp Cable

(Charging lead-acid battery via

the cigarette lighter port)

Cigarette Lighter to 5521 Cable

(For 12V devices with 5521 port,

such as routers, cameras, etc.)

Lead-acid battery charging cable

(DC7909)

Item Picture

TYPE-C Cable

(5A/100W, 2m)

Optional

(Available on ofﬁcial BLUETTI website)

JUST POWER ON 09

3. Product Overview

BLUETTI AC180P is a portable power station with 1800W pure sine wave inverter and

1152Wh LiFePO4 battery, perfect for camping, van life and more. In addition to 4 AC

output ports and 5 USB ports (4 USB-A and 1 USB-C), it also has a 12V/10A cigarette

lighter port for your vehicle devices and a wireless charging pad to run compatible

electronics, your phone, headphone, Bluetooth speaker, just to name a few. As for

recharging, AC180P takes up to 1440W AC input and 500W DC input, so you’re able to

fully charge it in a few hours. It also supports BLUETTI app control - with the Bluetooth

connectivity, you can monitor everything that's happening inside and optimize your

power usage to your preference.

DC Input

DC Power Button

LCD Screen

Power Button

AC Power Button

Wireless Charging Pad

AC Output

Grounding Pole(Grounding screw: M5*10)

AC Input Fuse

AC Input

Cigarette Lighter Port

USB-C Port

USB-A Port

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

⑬

3.1 Diagram

3 764 52

JUST POWER ON10

3.2 Speciﬁcations

Area

Battery Capacity

Cell Type

Net Weight

Dimensions (L*W*H)

Charging Temperature

Storage Temperature

Working Humidity

1440Wh

LiFePO4

About 16kg/35.27lbs

340mm 247mm 317mm/13.39in×9.72in×12.48in

0oC40oC/32°F~104°F

-20oC40oC/-4°F~104°F

10% 90%

Model AC180P

Discharging Temperature

-20°C 40°C (35°C 40°C: @1500W Max.)

-4°F~104°F (95°F~104°F: @1500W Max.)

(When SOC is 100%, the discharge power at 35°C~40°C can be

greater than 1500W, but it may trigger over temperature protection)

Power

Voltage

Current

Frequency

1800W in total

50/60Hz

Cigarette Lighter Port

USB-C (Type-C)

Wireless Charging

12VDC/10A

5/9/12/15/20VDC, 3A; 20VDC, 5A (Built-in eMarker chip)

5W/7.5W/10W/15W

100VAC

18A

120VAC

15A

220VAC

8.2A

230VAC

7.8A

AC Output

DC Output

50/60Hz

1440W Max. @10oC30oC50°F~86°F

Voltage

Max. Current

Frequency

Power

Interface

Power

Voltage

DC7909

500W/10A Max.

12V-60VDC

100VAC

15A

120VAC

15A

220VAC

10A

230VAC

10A

AC Input

DC Input

UPS Switching time ≤20ms

Test the function before use to avoid risk of data loss.

USB-A 5VDC/3A 15W in total

USB-A

JP US CN EU/UN/AU

JUST POWER ON 11

4. Operating Instructions

4.1.1. Power ON/OFF

• Press the PWR button to start the AC180P. When AC180P is on, press this button to

turn on/off the LCD screen. Press and hold the button for more than 2 seconds to turn

off the AC180P.

• Press the DC power button to turn on/off the DC output (cigarette lighter, USB,

wireless charging).

• Press the AC power button to turn on/off the AC output.

4 .1.2.Settings

• Setting mode: When the screen is on and the AC output is off, press and hold the AC

and DC power buttons for about 2 seconds to enter Setting mode.

• Frequency switching: The current output frequency (50Hz/60Hz) is displayed in the

lower right corner of the screen. Under Setting mode, press the AC power button to

switch the frequency.

• Power Lifting mode: The Power Lifting mode is disabled by default. To enable it, press

and hold the AC power button for about 2s in Setting Mode, or turn it on directly in the

BLUETTI app. When enabled, the icon is displayed on the screen. In this mode, the

AC180P can run high drain pure resistive loads* (≤2700W) while its rated output power

remains 1800W.

Note: The Power Lifting mode is not available when charging AC180P via an AC source

like a wall outlet or generator. The AC source will bypass the inverter and supply power

directly to connected AC loads.

4.1 Buttons

BLUETTI AC180P has PWR button, AC power button and DC power button.

* Include heaters, irons or any other devices consisting of heating elements only.

DANGER: This device is intended to be used indoors only. Do not use outdoors.

JUST POWER ON12

• Grid Enhancement mode: By default, the Grid Enhancement mode is disabled. Please

turn it on directly in the BLUETTI app. This mode ensures that the AC180P has a stable

and continuous AC input, as it allows AC180P to adapt to voltage ﬂuctuations and

waveform distortion of an AC source.

Note: Turn off the Grid Enhancement mode when using AC180P as a UPS. In this

mode, the UPS takes longer to switch over and may be unable to provide instant

emergency power to connected devices.

• ECO mode: When operating on ECO mode, the AC/DC output will automatically turn

off if the AC180P is bearing low or no load for a while.

When enabled, the ECO icon is displayed on the screen. Under Setting mode, press the

DC power button turn it

• Press the AC and DC power buttons at the same time to exit Setting mode.

Note: If you do not perform any operation in 1 minute, AC180P will exit Setting mode

automatically and no changes will be saved.

• Check the error code: Press the AC and DC power buttons at the same time for about 2

seconds, and then hold the AC power button to check the current error code (e.g. E001).

Output

AC output

DC output

Power

15W-30W

5W-10W

Duration

1, 2, 3, 4 hours

JUST POWER ON 13

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

⑬

⑭

4.2. LCD Screen

1 2 3 4 5 6 7

12 13 14 15 16 17 18 19

DC Input

Bluetooth

Wireless charging

Fan

ECO Mode

Turbo charging

Low voltage alert

Input power

Battery capacity

Output power

AC frequency

Temperature anomaly alert

Short circuit alert

Overload alert

Remaining time indicator

Power Lifting mode

AC indicator

DC indicator

AC input connected

⑮

⑯

⑰

⑱

⑲

JUST POWER ON14

4.3 Charging

AC180P supports four charging methods: AC, solar, car(cigarette lighter) and generator.

4.3.1. AC Charging (Wall Outlet)

Simply plug the AC180P into the standard wall outlet and start charging.

Startup

Shutdown

Overload

Short circuit

Charging

Turbo Charging

ECO mode enabled

Battery low

Abnormal temperature

AC Input

DC Input

Bluetooth connected

AC output enabled

DC output enabled

Power Lifting mode enabled

ﬂashes

displays

ﬂashes

displays

LCD Instructions

LCD lights up

LCD lights off

AC180P supports Turbo/Standard/Silent charging modes. It’s set to standard charging by

default, while the Turbo and silent modes can be enabled in BLUETTI app. BLUETTI’s AC

charging mode guide is as follows:

1) Turbo charging comes in handy when you need AC180P to be replenished in short time.

2) Standard charging is more friendly to AC180P’s battery.

3) Silent charginggives you quiet, low-power operation for long battery life.

JUST POWER ON 15

4.3.2.Solar Charging

Connect the solar panels (in series or parallel) to AC180P via the solar charging cable.

Note: Please make sure your solar panels comply with:

Voc: 12V-60V Input Current: 10A Max. Input Power: 500W Max.

4.3.3.Car Charging

Connect the AC180P to vehicle’s 12V cigarette lighter port via the car charging cable.

4.3.4.Generator Charging

Connect the AC180P to generator via the AC charging cable.

Warning: The open circuit voltage of solar panels cannot exceed 60V, otherwise it will

damage the device(Note:It’s not covered in the warranty)

Warning: Cigarette lighter must be completely plugged in, otherwise it may cause safety risks.

JUST POWER ON16

4.4 Discharging

The operation time of AC180P is subject to many factors, such as ambient temperature,

discharge rate, battery capacity, altitude, load characteristics, etc.

4.4.1.AC Output

AC180P has 4 AC output ports (2 ports for EU version), providing a total of up to 1800W

AC power. It also can handle a surge of 2700W.

4.4.2.DC Output

• 12V/10A cigarette lighter port

• USB-C (PD 100W)

• USB-A (30W in total, 15W Max.)

• Wireless charging pad (15W Max.)

4.4.3.Estimated Operation Time

Depending on the connected power loads, there are two different scenarios to calculate

the operation time of AC180P.

• If the AC180P is applied to a high power load, such as a 600W product.

Operation time (estimated) = Battery capacity (Wh) × DoD × η ÷ (load power)

• If applied to a small power load like a 40W product.

Operation time (estimated) = Battery capacity (Wh) × DoD × η ÷ (load power+self-con-

sumption of AC180P)

Note:

1) The self-consumption of AC180P is about 15W.

2) Load power and operation time are measured in watts and hours.

3) DoD refers to depth of discharge. AC180P works at 90% DoD for longer battery life. η is

the conversion efﬁciency of the inverter, which is larger than 85% for AC180P.

E.g. If you have a 40W refrigerator, you can run it for about 20 hours.

Operation time = 1440Wh x 90% x 85% ÷ (40W+15W) ≈20 hours.

Note: Low temperature and excessive loads could greatly impact the battery capacity

and reduces its normal operation time.

JUST POWER ON 17

4.5 BLUETTI App

Scan the QR code below or search "BLUETTI" in the App Store or Google Play to download

the BLUETTI app.

AC180P supports Bluetooth connection. Once connected, the AC180P can be accessed and

controlled on a mobile phone or other smart devices. For more details, please refer to

BLUETTI APP INSTRUCTIONS.

JUST POWER ON18

5. Appendix

How do I know whether my devices will work well with this product?

Please evaluate the total constant load of your devices. If it doesn't exceed the Max.

output power of AC180P (1800W), you can use this power station to run your devices.

Note: Some devices with built-in motor/compressor may start at 2-4 times the rated

power, which can easily overload the AC180P.

Can I use third-party solar panels to charge this product?

Yes, you can. Make sure your solar panels have an open circuit voltage of 12V-60V

and have the MC4 connectors. Please do NOT mix different types of solar panels.

Note: Time required for one full charge depends on weather condition, the sunshine

intensity and the angle of solar panels.

Can it charge and discharge at the same time?

A: Yes. It supports pass-through charging. AC180P comes with the premium

LiFePO4 battery and proprietary Battery Management System to ensure that it can

charge and discharge at the same time.

What is ECO mode and can I turn it off?

ECO mode helps save power, and you can turn it on or off on the screen. When

operating on ECO mode, the AC/DC output will automatically turn off if the AC180P

is bearing low or no load for a while. You can set the power threshold of AC output

and DC output to 15-30W /5-10W, respectively, for 1, 2, 3, or 4 hours.

Why is the charging power often too low?

AC180P has a built-in intelligent BMS that automatically adjusts the charging power

in response to the battery temperature and SoC, thus protecting the battery and

extending its service life.

Can I make the AC180P less noisy when charging?

Yes. Select “Silent” for AC charging in the BLUETTI app. Please refer to 4.3.1 AC

Charging for more details.

When should I use the Grid Enhancement mode?

This mode is handy when charging the AC180P via an unstable AC source, such as

an unreliable grid or generator.

E.g. If you change the generator's output while charging the AC180P, the voltage dip

will also cause the charge to fail.

5.1 FAQs

Q1:

Q2:

Q7:

Q3:

Q4:

Q5:

Q6:

JUST POWER ON 19

5.2 Troubleshooting

Error Code Error Description

Inverter overload

Inverter short circuit

Cigarette lighter overtemperature

Charging temperature too high

Charging temperature too low

Discharging temperature too high

Discharging temperature too low

PV Input overvoltage

E001

E003

E065

E068

E085

E086

E087

E088

E033

Others

Troubleshooting

Check if the power of connected

devices is too high.

Check if the connected devices are

damaged.

Check if the power of connected

devices is too high.

Wait for the battery to cool down

before charging.

Recommended charging

temperature: 0oC~40oC.

Wait for the battery to cool down

before discharging.

Recommended discharging

temperature: -20oC~40oC.

Ensure the PV input voltage is in

the range of 12V~60VDC.

Contact BLUETTI technical support.

Wait a few minutes and try again.

Cigarette lighter output short circuit

JUST POWER ON20

La page est en cours de chargement...

Bluetti AC180P Manuel utilisateur

Marque: Bluetti

Modèle: AC180P

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Bluetti AC180P User manual

Bluetti AC180P Manuel utilisateur

Bluetti AC180P Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents