Wacker Neuson PDI2A(I) Manuel utilisateur

Operator’s Manual

Notice d'emploi

Diaphragm Pump

Pompe à membrane

PDI2A, PDI3A,

PDT2A, PDT3A

Type PDI2A, PDI3A, PDT2A, PDT3A

Document

5000184808

Date 1215

Version 07

Language

EN

-FR

5000184808

Copyright notice

All rights, including copying and distribution rights, are reserved.

This publication may be photocopied by the original purchaser of the

machine. Any other type of reproduction is prohibited without express

written permission from Wacker Neuson Production Americas LLC.

Any type of reproduction or distribution not authorized by Wacker

Neuson Production Americas LLC represents an infringement of valid

copyrights. Violators will be prosecuted.

Trademarks

All trademarks referenced in this manual are the property of their

respective owners.

Manufacturer

Wacker Neuson Production Americas LLC

N92W15000 Anthony Avenue

Menomonee Falls, WI 53051 U.S.A.

Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957

www.wackerneuson.com

Original instructions

This Operator’s Manual presents the original instructions. The original

language of this Operator’s Manual is American English.

wc_tx001329gb_FM10.fm

3

PD2A / PD3A Foreword

Foreword

SAVE THESE INSTRUCTIONS—This manual contains important instructions for

the machine models below. These instructions have been written expressly by

Wacker Neuson Production Americas LLC and must be followed during installation,

operation, and maintenance of the machines.

Machine

documentation

■ From this point forward in this documentation, Wacker Neuson Production

Americas LLC will be referred to as Wacker Neuson.

■ Keep a copy of the Operator’s Manual with the machine at all times.

■ For spare parts information, please see your Wacker Neuson Dealer, or visit the

Wacker Neuson website at http://www.wackerneuson.com/.

■ When ordering parts or requesting service information, be prepared to provide

the machine model number, item number, revision number, and serial number.

Expectations

for

information in

this manual

■ This manual provides information and procedures to safely operate and

maintain the above Wacker Neuson model(s). For your own safety and to

reduce the risk of injury, carefully read, understand, and observe all instructions

described in this manual.

■ Wacker Neuson expressly reserves the right to make technical modifications,

even without notice, which improve the performance or safety standards of its

machines.

■ The information contained in this manual is based on machines manufactured

up until the time of publication. Wacker Neuson reserves the right to change any

portion of this information without notice.

■ The illustrations, parts, and procedures in this manual refer to Wacker Neuson

factory-installed components. Your machine may vary depending on the

requirements of your specific region.

CALIFORNIA

Proposition

65 Warning

Combustion exhaust, some of its constituents, and certain vehicle components

contain or emit chemicals known to the State of California to cause cancer and

birth defects or other reproductive harm.

Laws

pertaining to

spark

arresters

NOTICE: State Health Safety Codes and Public Resources Codes specify that in

certain locations spark arresters be used on internal combustion engines that use

hydrocarbon fuels. A spark arrester is a device designed to prevent accidental

discharge of sparks or flames from the engine exhaust. Spark arresters are

qualified and rated by the United States Forest Service for this purpose. In order to

comply with local laws regarding spark arresters, consult the engine distributor or

the local Health and Safety Administrator.

Machine Item Number Machine Item Number

PDT2A 5000620769 PDT3A 5000620773

PDI2A(I) 5000620772 PDI3A 5000620775

PDI3A(I) 5000620776

wc_tx001329gb_FM10.fm

4

Foreword PD2A / PD3A

Manufacturer’s

approval

This manual contains references to approved parts, attachments, and

modifications. The following definitions apply:

■ Approved parts or attachments are those either manufactured or provided by

Wacker Neuson.

■ Approved modifications are those performed by an authorized Wacker

Neuson service center according to written instructions published by Wacker

Neuson.

■ Unapproved parts, attachments, and modifications are those that do not

meet the approved criteria.

Unapproved parts, attachments, or modifications may have the following

consequences:

■ Serious injury hazards to the operator and persons in the work area

■ Permanent damage to the machine which will not be covered under warranty

Contact your Wacker Neuson dealer immediately if you have questions about

approved or unapproved parts, attachments, or modifications.

2015-CE-PD_en_Aug_FM10.fm

Manufacturer

Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,

Menomonee Falls, Wisconsin 53051 USA

Product

Product category

Product function

Item number

Net installed power

Measured sound power level

Guaranteed sound power level

PDT2A, PDT2, PDI2A(i)

PDT3A, PDT3, PDI3A, PDI3A(i)

Water Pump Units

To pump fluid

5000620769, 5000620772, 5000620773, 5000620775,

5000620776

PDT2A, PDI2A(i), PDT3A, PDI3A, PDI3A(i): 2.6 kW, PDT2, PDT3: 3.2 kW

PD2: 95 dB(A); PD3: 96 dB(A)

PD2: 97 dB(A); PD3: 98 dB(A)

Conformity Assessment Procedure

According to 2000/14/EC ANNEX V

Directives and Standards

We hereby declare that this product meets and complies with the relevant regulations and

requirements of the following directives and standards:

2006/42/EC, 2000/14/EC, EN 809:1998

Authorized Person for Technical Documents

Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6, 85084

Reichertshofen, Germany

EC Declaration of Conformity

Menomonee Falls, WI, USA,

Dan Domanski

Technical Director

For Wacker Neuson

Travis Pound

Manager, Product Engineering

For Wacker Neuson

Original Declaration of Conformity

Keith Herr

Vice President and Managing Director

For Wacker Neuson

Table of Contents

PD2A / PD3A

wc_bo5000184784_07_FM10TOC.fm

7

Foreword 3

EC Declaration of Conformity 5

1 Safety Information 9

1.1 Signal Words Used in this Manual ....................................................... 9

1.2 Machine Description and Intended Use ............................................. 10

1.3 Operating Safety ................................................................................ 11

1.4 Service Safety .................................................................................... 12

1.5 Operator Safety while Using Internal Combustion Engines ............... 14

2 Labels 15

2.1 Label Locations .................................................................................. 15

2.2 Label Meanings .................................................................................. 16

3 Lifting and Transporting 21

4 Operation 22

4.1 Preparing the Machine for First Use ................................................... 22

4.2 Hoses and Clamps ............................................................................. 22

4.3 Recommended Fuel ........................................................................... 23

4.4 Refueling the Machine ........................................................................ 24

4.5 Before Installing the Pump ................................................................. 25

4.6 Installing the Pump ............................................................................. 26

4.7 Starting ............................................................................................... 27

4.8 Stopping ............................................................................................. 28

4.9 Running the Pump .............................................................................. 29

4.10 Clearing Jams .................................................................................... 30

4.11 Emergency Shutdown Procedure ....................................................... 31

5 Maintenance 32

5.1 Maintaining the Emission Control System .......................................... 32

5.2 Periodic Maintenance Schedule ......................................................... 32

5.3 Servicing the Air Cleaner .................................................................... 34

5.4 Greasing the Connecting Rod Bearing ............................................... 35

5.5 Changing the Engine Oil .................................................................... 36

5.6 Cleaning the Sediment Cup ............................................................... 37

Table of Contents

PD2A / PD3A

wc_bo5000184784_07_FM10TOC.fm

8

5.7 Spark Plug ...........................................................................................38

5.8 Changing the Gearbox Oil ...................................................................39

5.9 Cleaning the Pump ..............................................................................40

5.10 Storage ................................................................................................41

5.11 Machine Disposal and Decommissioning ............................................42

6 Troubleshooting 43

7 Technical Data 45

7.1 Engine .................................................................................................45

7.2 Pump ...................................................................................................46

7.3 Sound Measurements .........................................................................46

7.4 Dimensions ..........................................................................................47

8 Emission Control Systems Information

and Warranty 49

8.1 Emission Control Systems Warranty Statement .................................49

9 AEM Safety Manual 51

wc_si000391gb_FM10.fm

9

PD2 / PD3 / PD2A / PD3A Safety Information

1 Safety Information

1.1 Signal Words Used in this Manual

This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE

signal words which must be followed to reduce the possibility of personal injury,

damage to the equipment, or improper service.

NOTICE: Used without the safety alert symbol, NOTICE indicates a situation

which, if not avoided, could result in property damage.

Note: A Note contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

► Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

► To avoid death or serious injury from this type of hazard, obey all safety

messages that follow this signal word.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

► To avoid possible death or serious injury from this type of hazard, obey all safety

messages that follow this signal word.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

► To avoid possible minor or moderate injury from this type of hazard, obey all

safety messages that follow this signal word.

wc_si000391gb_FM10.fm

10

Safety Information PD2 / PD3 / PD2A / PD3A

1.2 Machine Description and Intended Use

Machine

description

This machine is a diaphragm pump. The Wacker Neuson Diaphragm Pump

consists of a gasoline engine, a fuel tank, a handle, a set of wheels, and a

diaphragm pump with ports for fluid suction and discharge. The engine raises and

lowers the diaphragm via a connecting rod. The operator connects hoses to the

pump and routes them so that water and solids are drained from the work area and

discharged into an appropriate location.

Intended use

This machine is intended to be used for general de-watering applications. This

machine is intended for the pumping of clear water, or water containing solids up to

the size stated within the product specifications, and up to the flow, head, and

suction lift limits also stated within the product specifications.

This machine has been designed and built strictly for the intended use described

above. Using the machine for any other purpose could permanently damage the

machine or seriously injure the operator or other persons in the area. Machine

damage caused by misuse is not covered under warranty.

The following are some examples of misuse:

■ Pumping flammable, explosive, or corrosive fluids

■ Pumping hot or volatile fluids that result in pump cavitation

■ Operating the pump outside of product specifications due to incorrect diameter

hoses, incorrect length hoses, other inlet or outlet restrictions, or excessive

suction lift or head

■ Using the machine as a ladder, support, or work surface

■ Using the machine to carry or transport passengers or equipment

■ Operating the machine outside of factory specifications

■ Operating the machine in a manner inconsistent with all warnings found on the

machine and in the Operator’s Manual

This machine has been designed and built in accordance with the latest global

safety standards. It has been carefully engineered to eliminate hazards as far as

practicable and to increase operator safety through protective guards and labeling.

However, some risks may remain even after protective measures have been taken.

They are called residual risks. On this machine, they may include exposure to:

■ Heat, noise, exhaust, and carbon monoxide from the engine

■ Fire hazards from improper refueling techniques

■ Fuel and its fumes

■ Personal injury from improper lifting techniques

■ Projectile hazard from discharge

■ Crushing hazards from a tipping or falling pump

To protect yourself and others, make sure you thoroughly read and understand the

safety information presented in this manual before operating the machine.

wc_si000391gb_FM10.fm

11

PD2 / PD3 / PD2A / PD3A Safety Information

1.3 Operating Safety

Operator

training

Before operating the machine:

■ Read and understand the operating instructions contained in all manuals

delivered with the machine.

■ Familiarize yourself with the location and proper use of all controls and safety

devices.

■ Contact Wacker Neuson for additional training if necessary.

When operating this machine:

■ Do not allow improperly trained people to operate the machine. People

operating the machine must be familiar with the potential risks and hazards

associated with it.

Operator

qualifications

Only trained personnel are permitted to start, operate, and shut down the machine.

They also must meet the following qualifications:

■ have received instruction on how to properly use the machine

■ are familiar with required safety devices

The machine must not be accessed or operated by:

■ children

■ people impaired by alcohol or drugs

Application

area

Be aware of the application area.

■ Keep unauthorized personnel, children, and pets away from the machine.

■ Remain aware of changing positions and the movement of other equipment and

personnel in the application area/job site.

■ Identify whether special hazards exist in the application area, such as toxic

gases, or unstable ground conditions, and take appropriate action to eliminate

the special hazards before using the machine.

Be aware of the application area.

■ Do not operate the machine in areas that contain flammable objects, fuels, or

products that produce flammable vapors.

Safety

devices,

controls, and

attachments

Only operate the machine when:

■ All safety devices and guards are in place and in working order.

■ All controls operate correctly.

■ The machine is set up correctly according to the instructions in the Operator’s

Manual.

■ The machine is clean.

■ The machine’s labels are legible.

To ensure safe operation of the machine:

■ Do not operate the machine if any safety devices or guards are missing or

inoperative.

■ Do not modify or defeat the safety devices.

■ Do not use accessories or attachments that are not approved by Wacker

Neuson.

wc_si000391gb_FM10.fm

12

Safety Information PD2 / PD3 / PD2A / PD3A

Operating

guidelines

When operating this machine:

■ Ensure that the machine is on a firm, level surface and that it will not tip, roll,

slide, or fall while operating.

When operating this machine:

■ Do not pump volatile, flammable, or low-flash-point fluids.

■ Do not change hoses while the engine is running.

■ Do not attempt to move the machine while the engine is running.

Personal

Protective

Equipment

(PPE)

Wear the following Personal Protective Equipment (PPE) while operating this

machine:

■ Close-fitting work clothes that do not hinder movement

■ Safety glasses with side shields

■ Hearing protection

■ Safety-toed footwear

1.4 Service Safety

Service

training

Before servicing or maintaining the machine:

■ Read and understand the instructions contained in all manuals delivered with

the machine.

■ Familiarize yourself with the location and proper use of all controls and safety

devices.

■ Only trained personnel should troubleshoot or repair problems occurring with

the machine.

■ Contact Wacker Neuson for additional training if necessary.

When servicing or maintaining this machine:

■ Do not allow improperly trained people to service or maintain the machine.

Personnel servicing or maintaining the machine must be familiar with the

associated potential risks and hazards.

Precautions

Follow the precautions below when servicing or maintaining the machine.

■ Read and understand the service procedures before performing any service to

the machine.

■ All adjustments and repairs must be completed before operation. Do not

operate the machine with a known problem or deficiency.

■ All repairs and adjustments shall be completed by a qualified technician.

■ Turn off the machine before performing maintenance or making repairs.

wc_si000391gb_FM10.fm

13

PD2 / PD3 / PD2A / PD3A Safety Information

Personal

Protective

Equipment

(PPE)

Wear the following Personal Protective Equipment (PPE) while servicing or

maintaining this machine:

■ Close-fitting work clothes that do not hinder movement

■ Safety glasses with side shields

■ Hearing protection

■ Safety-toed footwear

In addition, before servicing or maintaining the machine:

■ Tie back long hair.

■ Remove all jewelry (including rings).

Machine

modifications

When servicing or maintaining the machine:

■ Use only accessories/attachments that are approved by Wacker Neuson.

When servicing or maintaining the machine:

■ Do not defeat safety devices.

■ Do not modify the machine without the express written approval of Wacker

Neuson.

Replacing

parts and

labels

■ Replace worn or damaged components.

■ Replace all missing and hard-to-read labels.

■ When replacing electrical components, use components that are identical in

rating and performance to the original components.

■ When replacement parts are required for this machine, use only Wacker

Neuson replacement parts or those parts equivalent to the original in all types of

specifications, such as physical dimensions, type, strength, and material.

Lifting and

transporting

When lifting the machine:

■ Make sure slings, chains, hooks, ramps, jacks, and other types of lifting devices

are attached securely and have enough weight-bearing capacity to lift or hold

the machine safely. See chapter Technical Data.

■ Remain aware of the location of other people when lifting the machine.

■ Make sure the transporting vehicle has sufficient load capacity and platform size

to safely transport the machine. See chapter Technical Data.

To reduce the possibility of injury:

■ Do not stand under the machine while it is being lifted or moved.

■ Do not get onto the machine while it is being lifted or moved.

Cleaning

When cleaning and servicing the machine:

■ Keep the machine clean and free of debris such as leaves, paper, cartons, etc.

■ Keep the labels legible.

When cleaning the machine:

■ Do not clean the machine while it is running.

■ Never use gasoline or other types of fuels or flammable solvents to clean the

machine. Fumes from fuels and solvents can become explosive.

wc_si000391gb_FM10.fm

14

Safety Information PD2 / PD3 / PD2A / PD3A

1.5 Operator Safety while Using Internal Combustion Engines

Operating

safety

When operating the pump:

■ Keep the area around exhaust pipe free of flammable materials.

■ Check the fuel lines and the fuel tank for leaks and cracks before starting the

engine.

When operating the pump:

■ Do not smoke while operating the machine.

■ Do not run the machine if fuel leaks are present or the fuel lines are loose.

■ Do not run the engine near sparks or open flames.

■ Do not touch the engine or muffler while the engine is running or immediately

after it has been turned off.

■ Do not operate a machine when its fuel cap is loose or missing.

■ Do not start the engine if fuel has spilled or a fuel odor is present. Move the

machine away from the spill and wipe the machine dry before starting.

Refueling

safety

When refueling the engine:

■ Clean up any spilled fuel immediately.

■ Refill the fuel tank in a well-ventilated area.

■ Replace the fuel tank cap after refueling.

When refueling the engine:

■ Do not smoke.

■ Do not refuel a hot or running engine.

■ Do not refuel the engine near sparks or open flames.

■ Do not refuel if the machine is positioned in a truck fitted with a plastic bed liner.

Static electricity can ignite the fuel or fuel vapors.

WARNING

Internal combustion engines present special hazards during operation and fueling.

Failure to follow the warnings and safety standards could result in severe injury or

death.

► Read and follow the warning instructions in the engine owner’s manual and the

safety guidelines below.

DANGER

Asphyxiation hazard. Using a pump indoors CAN KILL YOU IN MINUTES. Pump

exhaust contains carbon monoxide. This is a poison you cannot see or smell.

► NEVER use this pump inside a home or garage, EVEN IF doors and windows

are open. Only use OUTSIDE and far away from windows, doors, and vents.

► NEVER use a pump inside an enclosed area, such as a tunnel or a trench,

unless adequate ventilation is provided through such items as exhaust fans or

hoses.

wc_si000392gb_FM10.fm

15

PD2A / PD3A Labels

2 Labels

2.1 Label Locations

wc_gr007188

E

M

F

A

C

J

K

G

D

I

BL

wc_si000392gb_FM10.fm

16

Labels PD2A / PD3A

2.2 Label Meanings

A DANGER

Asphyxiation hazard.

■ Engines emit carbon monoxide.

■ Do not run the machine indoors or in an

enclosed area.

■ NEVER use inside a home or garage,

EVEN IF doors and windows are open.

Only use OUTSIDE and far away from

windows, doors, and vents.

■ Read the Operator’s Manual.

■ No sparks, flames, or burning objects near

the machine.

■ Stop the engine before refueling.

B NOTICE

Lifting point

C CAUTION

Grease connecting rod bearing monthly.

Read the Operator’s Manual.

STOPSTOP

178715178715

AVISO

AVIS

HINWEIS

wc_si000392gb_FM10.fm

17

PD2A / PD3A Labels

D WARNING

Pinch point! Do not operate without safety

guards. Read and understand the Operator’s

Manual.

E CAUTION

Read and understand the supplied

Operator’s Manual before operating this

machine. Failure to do so increases the risk

of injury to yourself and others.

F WARNING

Hot surface

G Guaranteed sound power level in db(A)

178714178714

wc_si000392gb_FM10.fm

18

Labels PD2A / PD3A

I Notice

Do not exceed 60 strokes per minute with the

diaphragm pump.

Read the Operator’s Manual.

J Notice

Use noncollapsible hose or pipe on suction

side of pump.

Read the Operator’s Manual.

K WARNING

Never pump volatile, flammable, or low-

flash-point fluids. These fluids could ignite or

explode.

Read the Operator’s Manual.

wc_si000392gb_FM10.fm

19

PD2A / PD3A Labels

L Certified Performance

Contractors Pump Bureau

A Bureau of AEM

The manufacturer of this pump certifies that

it was manufactured in accordance with the

standards of the Contractors Pump Bureau.

M

WARNING

Operation of this equipment may create sparks that can start fires around dry

vegetation. A spark arrester may be required. The operator should contact local

fire agencies for laws or regulations relating to fire prevention requirements.

WARNING

Operation of This Equipment May Create Sparks That Can Start Fires Around Dry

Vegetation. A Spark Arrestor May be Required. The Operator Should Contact Local

Fire Agencies For Laws or Regulations Relating to Fire Prevention Requirements.

Per CAL. PRC. CODE

wc_si000392gb_FM10.fm

20

Labels PD2A / PD3A

Notes

La page est en cours de chargement...

Wacker Neuson PDI2A(I) Manuel utilisateur

Ce manuel convient également à

Wacker Neuson PDI2A(I) Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents