Frigidaire 318200929 Manuel utilisateur

Marque: Frigidaire

Modèle: 318200929

Catégorie: Cuisinières

Taper: Manuel utilisateur

Ce manuel convient également à

Oven 318200929

318200929 (0407) Rev. A

ElectricElectric

Electric

Wall Oven

Single and Double

Warranty ................ Back Cover

Before You Call

...........................................14-15

Adjusting Your

Oven Temperature ................ 13

Solutions to

Common Problems

Care & Cleaning...............10-13

Cooking Informations ......... 7-9

Setting Oven Controls ........... 6

Before Setting

Oven Controls......................... 6

Features at a Glance .............. 5

Important Safety Instructions ... 3-4

Welcome .................................. 2

Welcome & Congratulations

Versión en español

Si desea obtener una copia en español

de este Manual del Usuario, sírvase

escribir a la dirección que se incluye a

continuación. Solicite la P/N

318200924E.

Spanish Use & Care Manual

Electrolux Home Products

P. O. Box 212378

Augusta, GA 30917

Congratulations on your purchase of a new appliance! At Electrolux Home

Products, we are very proud of our product and are completely committed to

providing you with the best service possible. Your satisfaction is our number one

priority.

We know you’ll enjoy your new appliance and Thank You for choosing our product.

We hope you consider us for future purchases.

PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual contains general operating instructions for your appliance

and feature information for several models. Your product may not have all the

described features. The graphics shown are representative. The graphics on your

appliance may not look exactly like those shown. These instructions are not

meant to cover every possible condition and situation that may occur. Common

sense and caution must be practiced when installing, operating and maintaining

any appliance.

Please record your model and serial numbers below for future reference.

Model Number:

Serial Number:

Purchase Date:

Product Registration

The PRODUCT REGISTRATION CARD should

be filled in completely, signed and returned to

Electrolux Home Products.

Questions?

1-800-944-9044

(United States)

1-866-294-9911

(Canada)

Please attach sales receipt

here for future reference.

Serial Plate Location

Single Wall Oven

Serial Plate Location

Double Wall Oven

Serial Plate Location

Read all instructions before using this appliance.

Save these instructions for future reference.

This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all

instructions given.

This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.

This symbol will help alert you to situations that may cause bodily injury or property damage.

Important Safety Instructions

• Never modify or alter the construction of the appliance

by removing panels, wire covers, or any other part of

the product.

• Remove the oven door from any unused appliance if it

is to be stored or discarded.

Stepping, leaning, sitting or pulling down

on the door of this appliance can result in serious injuries

and may also cause damage to the appliance. Do not allow

children to climb or play around the appliance.

• Storage in or on Appliance—Flammable materials

should not be stored in an oven. This includes paper,

plastic and cloth items, such as cookbooks, plasticware

and towels, as well as flammable liquids. Do not store

explosives, such as aerosol cans, in or near the appliance.

Do not use the oven for storage.

Do not store items of interest to children in

the cabinets above an appliance. Children climbing on the

appliance to reach items could be seriously injured.

• Do not leave children alone—Children should not be

left alone or unattended in the area where an appliance

is in use. They should never be allowed to sit or stand on

any part of the appliance.

• DO NOT TOUCH INTERIOR OVEN ELEMENTS OR

INTERIOR SURFACES OF THE WALL OVEN UNTIL

THEY HAVE COOLED. The oven heating elements may be

hot even though the elements are dark in color. Areas near

the elements may become hot enough to cause burns.

During and after use, do not touch, or let clothing or other

flammable materials touch these areas until they have had

sufficient time to cool. Among these areas are the oven

vent openings, the surfaces near these openings, oven

door and window.

• Wear Proper Apparel—Loose-fitting or hanging

garments should never be worn while using the

appliance. Do not let clothing or other flammable materials

contact hot surfaces.

Never use your appliance for warming or

heating the room.

• Remove all tape and packaging wrap before using the

appliance. Destroy the carton and plastic bags after

unpacking the appliance. Never allow children to play

with packaging material. Do not remove the wiring label and

other literature attached to the back of the wall oven. Do not

remove model/serial number plate.

• Proper Installation—Be sure your appliance is properly

installed and grounded by a qualified electrician or

installer in accordance with the National Electrical

Code ANSI/NFPA No. 70 (U.S.A.) or CSA C22.1, PART 1

(Canada)—latest editions and local code requirements.

Install only per installation instructions provided in the

literature package for this appliance.

Ask your dealer to recommend a qualified technician and an

authorized repair service. Know how to disconnect the

electrical power to the appliance at the circuit breaker or fuse

box in case of an emergency.

Electronic controllers can be damaged by

cold temperatures. When you use your appliance for the

first time, or if it has not been used for a long period of

time, make sure that it has been exposed to a temperature

above 0°C/32°F for at least 3 hours before connecting it to

the power supply.

• User Servicing—Do not repair or replace any part of the

appliance unless specifically recommended in the

manuals. All other servicing should be done only by a

qualified technician to reduce the risk of personal injury and

damage to the appliance.

• All wall ovens can tip.

• Injury to persons could result.

• Install anti-tip bracket packed with

wall oven.

• See Installation Instructions.

To reduce the risk of tipping, the wall

oven must be secured by properly

installed anti-tip bracket provided with

the wall oven. Refer to the Installation

Instructions for proper anti-tip bracket

installation.

• Do Not Use Water or Flour on Grease Fires—Smother

the fire with a pan lid, or use baking soda, a dry

chemical or foam-type extinguisher.

• When heating fat or grease, watch it closely. Fat or

grease may catch fire if allowed to become too hot.

• Use Only Dry Pot holders—Moist or damp pot holders

on hot surfaces may result in burns from steam. Do not

let the pot holders touch the hot heating elements. Do not

use a towel or other bulky cloth instead of a pot holder.

• Do Not Heat Unopened Food Containers—Build-up of

pressure may cause the container to burst and result in

injury.

IMPORTANT—Do not attempt to operate the appliance

during a power failure. If power fails, always turn off the

appliance. If the appliance is not turned off and the power

resumes, it will begin to operate again. Once the power

resumes, reset the clock and oven function.

IMPORTANT INSTRUCTIONS FOR USING

YOUR OVEN

• Use Care When Opening an Oven Door—Stand to the

side of the appliance when opening the door of a hot oven.

Let hot air or steam escape before you remove or replace

food in the oven.

• Keep Oven Vent Ducts Unobstructed. The wall oven is

vented at the center trim depending of the model. Touching

the surfaces in this area when the wall oven is operating

may cause severe burns. Also, do not place plastic or heat-

sensitive items near the oven vent. These items could melt

or ignite.

• Placement of Oven Racks. Always place oven racks in

desired location while oven is cool. Remove all utensils

from the rack before removing rack. If rack must be moved

while oven is hot, use extreme caution. Use pot holders and

grasp the rack with both hands to reposition. Do not let pot

holders contact the hot oven element or interior of the oven.

• Do not use the broiler pan without its insert. The broiler

pan and grid allow dripping fat to drain and be kept away

from the high heat of the broiler.

• Do not cover the broiler grid or oven bottom with

aluminum foil. Exposed fat and grease could ignite.

• Do not touch a hot oven light bulb with a damp cloth.

Doing so could cause the bulb to break. Disconnect the

appliance or shut off the power to the appliance before

removing and replacing the bulb.

• Protective liners—Do not use aluminum foil to line the

oven bottom. Only use aluminum foil as recommended in

this manual. Improper installation of these liners may result

in risk of electric shock, or fire.

IMPORTANT INSTRUCTIONS FOR CLEANING

YOUR OVEN

• Clean the appliance regularly to keep all parts free of

grease that could catch fire. Exhaust fan ventilation

hoods and grease filters should be kept clean. Do not allow

grease to accumulate. Greasy deposits in the fan could

catch fire. Refer to the hood manufacturer's instructions for

cleaning.

• Cleaners/Aerosols—Always follow the manufacturer's

recommended directions for use. Be aware that excess

residue from cleaners and aerosols may ignite causing

damage and/or injury.

SELF-CLEANING OVEN MODELS

• Clean in the self-cleaning cycle only the parts of the

appliance listed in this Owner's Guide. Before using the

self-cleaning cycle of the appliance, remove the broiler pan

and any utensils stored in the appliance.

• Do not clean the oven door gasket. The door gasket is

essential for a good seal. Care should be taken not to rub,

damage or move the gasket.

• Do not use oven cleaners. No oven cleaner or oven liner

protective coating of any kind should be used in or around

any part of the appliance

The health of some birds is extremely sensitive

to the fumes given off during the self-clean cycle of any wall

oven. Move birds to another well ventilated room.

Important Safety Instructions

SAVE THESE INSTRUCTIONS

Features At A Glance

Features will vary according to model

Your Electric

Wall Oven

Features

At A Glance

Upper Oven

Lower Oven

Electronic Oven Controls with Clock and Kitchen

Timer (Features will vary according to model)

Oven

Vent

Broil

Element

Adjustable

Oven Racks

Glass Front Oven Door with

Large Window Opening

Broil Pan

Dual or Single Interior Oven Lights

depending on your model

Large 1 Piece Door Handle

Manual or Self-Clean Oven

depending on your model

Broil Pan Insert

Electronic Oven

Controls with Clock

and Kitchen Timer

(Features will vary

according to model)

Broil Pan

Dual or Single Interior Oven Lights

depending on your model

Self-Clean Oven

depending on your model

Broil Pan Insert

Upper Oven

Vent

Broil

Element

Adjustable Oven Racks

Glass Front Oven Door with

Large Window Opening

Large 1 Piece Door Handle

Manual or Self-Clean Oven

depending on your model

Single Wall Oven

Double Wall Oven

Before Setting Oven Controls

Setting Oven Controls

Some models are equipped with a blower which runs in baking

and self-cleaning mode to keep all internal components at a cool temperature.

The blower may keep running even if the oven has been turned off, until the

components have cooled down.

Oven Vent Location

The ovens are vented at the center trim. When the oven is on, warm air is released through

the vent. This venting is necessary for proper air circulation in the oven and good baking

results.

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS

COOL (PRIOR TO OPERATING THE OVEN).

Always use

oven mitts when using the oven.

To remove an oven rack, pull the rack forward until it stops.

Lift up front of rack and slide out.

To replace an oven rack, fit the rack onto the guides on the

oven walls. Tilt the front of the rack upward and slide the

rack back into place.

UpperOven

LowerOven

Single and Upper Oven

Vent Location

Lower Oven

Vent Location

Air Circulation in the Oven

If using 1 rack, place in center of oven. If using multiple racks, stagger

cookware as shown.

For best air circulation and baking results allow 2-4" (5-10 cm) around the

cookware for proper air circulation and be sure pans and cookware do not touch

each other, the oven door, sides or back of the oven cavity. The hot air must

circulate around the pans and cookware in the oven for even heat to reach

around the food.

Refer to the Electronic Oven Control Guide for oven settings.

Multiple Oven Racks

1 Oven Rack

Cooking Informations

Oven Baking

For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc... There is no need to

preheat the oven for roasting meat or baking casseroles.

The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.

Baking

Problems

Cookies and bis-

cuits burn on the

bottom.

Cakes too dark on

top or bottom.

Cakes not done in

the center.

Cakes not level.

Foods not done

when cooking time

is up.

Causes

• Cookies and biscuits put into

the oven before the preheating

time is completed.

• Oven rack overcrowded.

• Dark pan absorbs heat too fast.

• Cakes put into the oven before

preheating time is completed.

• Rack position too high or low.

• Oven too hot.

• Incorrect pan size.

• Pan not centered in oven.

• Wall oven not level.

• Pan too close to oven wall or

rack overcrowded.

• Pan warped.

• Oven too cool.

• Oven overcrowded.

• Oven door opened too fre-

quently.

Corrections

• Allow oven to preheat to the selected temperature be-

fore placing food in oven.

• Choose pan sizes that will permit 5.1 cm to 10.2 cm (2”

to 4”) of air space on all sides when placed in the oven.

• Use a medium-weight aluminum baking sheet.

• Allow oven to preheat to the selected temperature be-

fore placing food in the oven.

• Use proper rack position for baking needs.

• Set oven temperature 25°F/12°C lower than recom-

mended.

• Set oven temperature 25°F/12°C lower than recom-

mended.

• Use pan size suggested in recipe.

• Use proper rack position and place pan so there is 5.1

cm to 10.2 cm (2” to 4”) of space on all sides of pan.

• Place a marked glass measuring cup filled with water

on the center of the oven rack. If the water level is un-

even, refer to the installation instructions for leveling

the wall oven.

• Be sure to allow 5.1 cm to 10.2 cm (2” to 4”) of clear-

ance on all sides of each pan in the oven.

• Do not use pans that are dented or warped.

• Set oven temperature 25°F/12°C higher than suggested

and bake for the recommended time.

• Be sure to remove all pans from the oven except the

ones to be used for baking.

• Open oven door only after shortest recommended bak-

ing time.

Baking Problems and Solutions Chart

Broiling

Broiling is a method of cooking tender cuts of meat by direct heat under the broil element

of the oven.

Preheating

Preheating is suggested when searing rare steaks. (Remove the broiler pan before

preheating. Foods will stick if placed on hot metal.) To preheat, set the control(s) to BROIL

as instructed in the Owner's Guide. Wait for the element to become red-hot, usually about

2 minutes. Preheating is not necessary when broiling meats well-done.

To Broil

Broil on side until the food is browned; turn and cook on the second side. Season and

serve. Always pull rack out to the "stop" position before turning or removing food.

Determine Broiling Times

Broiling times vary, so watch the food closely. Time not only depends on the distance from element, but on the thickness and

aging of meat, fat content and doneness preferred. The first side usually requires a few minutes longer than second. Frozen

meats also require additional time.

Broiling Tips

The broiler pan and its grid allow dripping grease to drain and be kept away from the

high heat of the broiler.

DO NOT use the pan without its grid. DO NOT cover the grid with foil. The

exposed grease could ignite.

Should an oven fire occur, close the oven door and turn off the

oven. If the fire continues, throw baking soda on the fire or use fire extinguisher. DO

NOT put water or flour on the fire. Flour may be explosive.

Broiler Clean-Up Tips:

To make cleaning easier, line the bottom of the broiler pan with aluminum foil. DO NOT cover the broiler grid with foil.

To prevent grease from baking on, remove the broiler pan from the oven as soon as cooking is completed. Use hot pads

because the broiler pan is extremely hot. Pour off grease. Soak the pan in HOT, soapy water.

Clean the broiler pan as soon as possible after each use. If necessary, use soap-filled steel wool pads. Heavy scouring may

scratch the grid.

Broiler Pan

Grid

Cooking Informations

Broil Stop PositionBroil Stop Position

Cooking Informations

Convection Cooking (some models)

The convection oven uses a fan located in the rear wall of the oven to circulate heated air around the food to be cooked. The

controlled air flow pattern quickly seals the food surface retaining the natural juices and flavour. This method of cooking enables

you to obtain the best culinary results when baking, thawing, dehydrating and roasting foods.

Convection notes:

1. Batch cooking is more convenient with better results.

2. Defrosting is quicker in convection mode when compared to regular radiant cooking.

3. Remember to use tested recipes with times adjusted for convection baking/roasting when using the convection mode. Times

may be reduced by as much as 30% when using the convection feature.

Convection Roasting (some models)

When convection roasting, use the broiler pan and grid, and the roasting rack. The broiler pan will catch grease spills and the

grid will help prevent spatters. The roasting rack will hold the meat.

To prevent food from contacting the broil element

and to prevent grease spattering, DO NOT use the roasting rack

when broiling.

1. Place oven rack on next-bottom rack position.

2. Place the grid in the broiler pan. The roasting rack fits on the grid

allowing the heated air circulate under the food for even cooking

and helps to increase browning on the underside. Make sure the

roasting rack is securely seated on the grid in the broiler pan. DO

NOT use the broiler pan without the grid or cover the grid with

aluminum foil.

3. Position food (fat side up) on the roasting rack.

4. Place the broiler pan on the oven rack. Note: Always pull rack out

to the stop position before removing food.

NOTE: For best convection roasting result, always use the broiler

pan, grid and roasting rack.

Roasting Rack

Broiler Pan

Broiler Pan Grid

Care & Cleaning

(Cleaning Chart)

Surfaces

Aluminum (Trim Pieces)

& Vinyl

Painted and Plastic Parts,

Body Parts, and Decorative

Trim

Stainless Steel, Chrome,

Control Panel, Decorative

Trim

Porcelain Enamel Broiler

Pan and Insert, Door Liner,

Body Parts

Oven Racks

Oven Door

How to Clean

Use hot, soapy water and a cloth. Dry with a clean cloth. Do not scour or use all-purpose

cleaners, ammonia, powdered cleaners or commercial oven cleaner. They can scratch

and discolor aluminum.

For general cleaning

, use hot, soapy water and a cloth.

For more difficult soils and built-

up grease

, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60

minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these

materials; they can scratch.

Before cleaning the control panel,

turn all controls to OFF. Clean using hot, soapy

water and a dishcloth. Rinse with a clean water using a dishcloth. Be sure to squeeze

excess water from the cloth before wiping the panel.

Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water

and a cloth. Do not use cleaners with high concentrations of chlorides or

chlorines. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are

especially made for cleaning stainless steel. Always be sure to rinse the cleaners

from the surface as bluish stains may occur during heating that cannot be removed.

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1

solution of clear water and ammonia.

If necessary

, cover difficult spots with an

ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a

damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a

clean cloth. Remove all cleaners or the porcelain may become damaged during future

heating. DO NOT use spray oven cleaners.

Oven racks may be removed or left in the oven during the Self-Clean cycle for

cleaning. If removed, clean by using a mild, abrasive cleaner following manufacturer's

instructions. Rinse with clean water and dry.

If the racks are cleaned in the Self-Clean cycle, their color will turn slightly blue and

the finish will be dull. After the Self-Clean cycle is complete, and the oven has

cooled, rub the sides of the racks with wax paper or a cloth containing a small

amount of salad oil (this will make the racks glide easier into the rack positions).

Use soap & water to thoroughly clean the top, sides and front of the oven door. Rinse

well. You may use a glass cleaner on the outside glass of the oven door. DO NOT

immerse the door in water. DO NOT spray or allow water or the glass cleaner to

enter the door vents. DO NOT use oven cleaners, cleaning powders or any harsh

abrasive cleaning materials on the outside of the oven door.

DO NOT clean the oven door gasket. The oven door gasket is made of a woven

material, on Self-Cleaning models, which is essential for a good seal. Care should be

taken not to rub, damage or remove this gasket.

DO Hand

Clean Frame

DO Hand

Clean Door

DO NOT

Hand Clean

Oven Door

Gasket

Care & Cleaning

During the self-cleaning

cycle, the outside of the wall oven can

become very hot to the touch. DO NOT

leave small children unattended near

the appliance.

The health of some birds

is extremely sensitive to the fumes given

off during the self-clean cycle of any wall

oven. Move birds to another well

ventilated room.

DO NOT line the oven

walls, racks, bottom or any other part of

the appliance with aluminum foil. Doing

so will destroy heat distribution, produce

poor baking results and cause permanent

damage to the interior (aluminum foil will

melt to the interior surface of the oven).

DO NOT force the oven

door open. This can damage the

automatic door locking system. Use

caution when opening the door after the

Self-Cleaning cycle is completed. The

oven may still be VERY HOT.

Self-Cleaning Oven

A Self-Cleaning oven cleans itself with high temperatures (well above cooking

temperatures) which eliminate soils completely or reduces them to a fine

powdered ash you can wipe away with a damp cloth.

Adhere to the following cleaning precautions:

• Allow the oven to cool before cleaning.

• Wear rubber gloves when cleaning any exterior parts of the oven manually.

• DO NOT clean the oven door gasket. The woven material of the oven door

gasket is essential for a good seal. Care should be taken not to rub, damage

or remove the gasket.

• DO NOT use any cleaning materials on the oven door gasket. Doing so could

cause damage.

• Remove the broiler pan and insert, all utensils and any aluminum foil.

These items cannot withstand high cleaning temperatures.

• Oven racks do not have to be removed, if they are not removed during the

Self-Clean cycle their color will turn slightly blue and the finish will be dull. If

left in, after the cycle is complete and the oven has cooled, rub the sides of

the oven racks with wax paper or a cloth containing a small amount of salad

oil (this will make the racks glide easier into the rack position).

• Remove any excessive spillovers in the oven cavity before starting the

Self-Cleaning cycle. To clean, use hot, soapy water and a cloth. Large

spillovers can cause heavy smoke or fire when subjected to high

temperatures. DO NOT allow food spills with a high sugar or acid content

(such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the

surface as they may leave a dull spot even after cleaning.

• Clean any soil from the oven frame, the door liner outside the oven door

gasket and the small area at the front center of the oven bottom. These

areas heat sufficiently to burn soil on. Clean with soap and water.

NOTE: Prior to setting the Self-Clean cycle, any spills remaining on the oven

bottom should be removed.

Some models have an exposed Bake element in the lower oven cavity. On these

models the bake element is designed to be tilted up using your hand from the

front of the bake element. This will allow easier access to the oven bottom for

cleaning. Be careful not to raise the element more than 4 or 5 inches from the

resting position.

The oven bake and broil elements may appear to have cooled after

they have been turned OFF. The elements may still be hot and burns may

occur if these elements are touched before they have cooled sufficiently.

What to Expect during Cleaning:

While the oven is in operation, the oven heats to temperatures much higher than those

used in normal cooking. Sounds of metal expansion and contraction are normal. Odor

is also normal as the food soil is being removed. Smoke may appear through the oven

vent.

If heavy spillovers are not wiped up before cleaning, they may flame and cause more

smoke and odor than usual. This is normal and safe and should not cause alarm. If

available, use an exhaust fan during the self-cleaning cycle.

Note: See additional cleaning

information for the oven door in the

General Care & Cleaning section.

To Set the Self-Clean Cycle

Refer to the Oven Control Guide for Self-Clean Cycle settings.

DO Hand

Clean Frame

DO Hand

Clean Door

DO NOT Hand Clean

Oven Door Gasket

Self-Cleaning (some models)

Cleaning the Manual Clean Oven (Regular oven models only)

Porcelain has a smooth finish and is a type of glass fused to metal. Oven cleaners can be used on all interior oven surfaces.

REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE.

REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.

Adhere to the following cleaning precautions:

• Allow the oven to cool before cleaning.

• Wear rubber gloves when cleaning the appliance manually.

General Cleaning

Remove soils using hot, soapy water. Do not allow food spills with a high sugar or acid content (such as milk, tomatoes,

saukerkraut, fruit juices or pie filling) to remain on the surface as they may cause a dull spot even after cleaning.

To Remove Heavy Soil

1. Allow a dish of ammonia to sit in the oven overnight or for several hours with the oven door closed. Clean softened spots

using hot, soapy water. Rinse well with water and a clean cloth.

2. If soil remains, use a soap-filled scouring pad or a nonabrasive cleaner. If necessary, use an oven cleaner following

manufacturer's instructions. DO NOT mix ammonia with other cleaners.

Adhere to the following precautions when using oven cleaners:

1. DO NOT spray on the electrical controls or switches because it could cause a short circuit and result in sparking or fire.

2. DO NOT allow a film from the cleaner to build up on the temperature sensing bulb; it could cause the oven to heat improperly.

(The bulb is located in the rear of the oven.) Carefully wipe the bulb clean after each oven cleaning, being careful not to move

the bulb. A change in its position could affect how the oven bakes. Avoid bending the bulb and capillary tube.

3. DO NOT spray any cleaner on the oven door trim or gasket, handles or any exterior surfaces of the appliance, wood or painted

surfaces. The cleaner can damage these surfaces.

To Clean the Oven Bottom

Clean using hot, soapy water, a mild abrasive cleanser, a soap-filled abrasive pad or oven cleaner following manufacturer's

instructions.

Ammonia must be rinsed before operating the oven. Provide adequate ventilation.

DO NOT line the oven walls, bottom, racks or any other part of the appliance with aluminum foil. Doing so will

destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt

to the interior surface of the oven).

Care and Cleaning of Stainless Steel (some models)

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the

appearance of stainless steel parts. Please refer to chart provided at beginning of the Care & Cleaning section in this Use &

Care Manual.

Care & Cleaning

Removing and Replacing the Oven Door

The door is heavy. For safe, temporary storage, lay the door flat

with the inside of the door facing down.

To Remove Oven Door:

1. Open the door to the fully opened position.

2. Pull up the lock located on both hinge supports and engage it in the hinge

lever hooks (Figure 1). You may have to apply a little downward pressure on

the door to pull the locks fully over the hinge lever hooks.

3. Grab the door by the sides and pull the bottom of the door up and toward you

to disengage the hinge supports. Keep pulling the bottom of the door toward

you while rotating the top of the door toward the appliance to completely

disengage the hinge levers (Figure 2).

4. To clean oven door, follow the instructions provided in the General Care &

Cleaning table.

To Replace Oven Door:

1. Grab the door by the sides; place the hinge supports in the hinge slots. Open

the door to the fully opened position.

2. Disengage the lock from the hinge lever hooks on both sides (Figure 3).

Note: Make sure the hinge supports are fully engaged before unlocking the hinge

levers.

3. Close the oven door.

Special Door Care Instructions

Most oven doors contain glass that can break.

Read the following recommendations:

1. Do not close the oven door until all the oven racks are fully in place.

2. Do not hit the glass with pots, pans, or any other object.

3. Scratching, hitting, jarring or stressing the glass may weaken its structure

causing an increased risk of breakage at a later time.

Changing the Oven Light

On some models an interior oven light will turn automatically when the oven

door is opened. The oven light may be turned on when the door is closed by

using the oven light switch located on the control panel. On some models,

the lamp is covered with a glass shield held in place by a wire holder. THE

GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.

To replace the light bulb:

CAUTION: BE SURE THE OVEN IS COOL.

1. Turn the power off at the main source.

2. Wear a leather-faced glove for protection against possible broken glass.

3. Replace bulb with 40-watt appliance bulb only.

4. For models with glass shield, press holder on one side to release glass

shield, change bulb and be sure to replace the glass shield.

Lock in normal position

Figure 3

Hinge lever

Lock engaged for door removal

Figure 1

HINGE SLOT - Door removed

from the oven

Figure 2

Hinge lever hook

Hinge

support

OCCURRENCE

Oven Control Beeps and Displays any F

code (for exemple F11).

-F8- is displayed.

Installation.

Entire oven does not operate.

POSSIBLE CAUSE/SOLUTION

Electronic control has detected a fault condition. Push CLEAR pad to clear the display

and stop the display from beeping. Reprogram the oven. If a fault reoccurs, record the fault

number, push the CLEAR pad and contact an authorized servicer.

The door was left open and controls set for self-cleaning cycle. Close the door and push

both upper and lower oven CLEAR pads.

Place oven rack in center of oven. Place a level on the oven rack. Contact installing agent

if rack and cabinet cutout flooring are not level.

Kitchen cabinet misalignment may make oven appear to be not level. Be sure cabinets

are square and level. Contact cabinet maker to correct problem.

When the oven is first plugged in, or when the power supply to the oven has been

interrupted, the display will flash. The oven cannot be programmed until the clock is set.

Be sure electrical cord is securely connected into the electrical junction box.

Cord/plug is not installed and/or connected. Cord is not supplied with oven. Contact your

dealer, installing agent or authorized servicer.

Service wiring not complete. Contact your dealer, installing agent or authorized servicer.

Power outage. Check house lights to be sure. Call your local electric company.

Short in cord/plug. Replace cord/plug.

Controls are not set properly. See instructions under Setting Oven Controls to set the

controls.

Care & Cleaning

To remove the “hidden bake” cover:

1. In order to remove the “hidden bake” cover, pull the back edge with one

hand about 1/2" inch and lift up the “hidden bake” cover with both hands.

(See picture)

2. When re-installing the “hidden bake” cover, be sure to put it all the way to

the back of the oven and lay it down on the 2 shoulder screws. Then push

the front edge of the cover in its place below the front bracket.

To have easier access to the "hidden bake" cover, you can remove the oven

door by following the instructions on previous page.

IMPORTANT:

Always replace the “hidden bake” cover before the next use.

Before you call

Solutions to Common Problems

For instructions on how to adjust the oven temperature refer to the electronic oven control guide.

Adjusting Your Oven Temperature

Before you call

Solutions to Common Problems

OCCURRENCE

Entire oven does not operate.

Oven light does not work.

Oven smokes excessively during

broiling.

Poor baking results.

Self-cleaning cycle does not work.

Soil not completely removed after self-

cleaning cycle is completed.

Flames inside oven or smoke from

vent.

POSSIBLE CAUSE / SOLUTION

House fuse has blown or circuit breaker has tripped immediately following installation.

House fuse may not be fully engaged. Check fuse and screw or engage circuit breaker

securely.

House fuse has blown or circuit breaker has tripped after the oven has been

installed and previously operating. Call an authorized servicer.

Burned-out or loose bulb. Follow the instructions under Changing Oven Light to replace

or tighten the bulb.

Oven door is closed. Door should be open during broiling.

Meat too close to the broiler unit. Reposition the rack to provide more clearance between

the meat and the broiler. Preheat broil element for quick searing operation.

Meat not properly prepared. Remove excess fat from meat. Slash remaining fatty edges

to prevent curling, but do not cut into the lean.

Grid on broiler pan wrong side-up. Grease does not drain into broiler pan. Always place

the grid on the broiler pan with the ribs up and the slots down to allow grease to drip into

the pan.

Broiler pan used without grid or grid cover with foil. DO NOT use the broiler pan without

the grid or cover the grid with foil.

Oven needs to be cleaned. Grease has built up on oven surfaces. Regular cleaning is

necessary when broiling frequently. Old grease or food spatters cause excessive

smoking.

Many factors affect baking results. See Baking for hints, causes and corrections. See

Adjusting Oven Temperature.

Make sure the oven door is close.

Controls not set properly. Follow instructions.

Self-cleaning cycle was interrupted. Stop time must be set 2-4 hours past the start time.

Follow steps under "To Stop or Interrupt a Self-Cleaning Cycle" in the Timer Control Guide.

On a dual cavity model, one oven is in operation. If one oven is set for any mode, the second

oven cannot be set to CLEAN.

Failure to clean bottom, from top of oven, frame of oven or door area outside oven seal.

These areas are not in the self-cleaning area, but get not enough to burn on residue. Clean

these areas before the self-cleaning cycle is started. Burned on residue can be cleaned

with a stiff nylon brush and water or a nylon scrubber. Be careful not to damage the oven

gasket.

Excessive spillovers in oven. Set the self-clean cycle for longer cleaning time.

Excessive spillovers in oven. This is normal, especially for high oven temperatures, pie

spillovers or for large amounts of grease on bottom of oven. Wipe up excessive spillovers.

LIMITED WARRANTY

* NORMAL

RESPONSIBILITIES

OF THE CONSUMER

EXCLUSIONS

IF YOU NEED

SERVICE

This warranty applies only to products in ordinary household use, and the consumer is responsible for

the items listed below:

1. Proper use of the appliance in accordance with instructions provided with the product.

2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in

accordance with all local plumbing, electrical and/or gas codes.

3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose

connections or defects in house wiring.

4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which

are not a part of the appliance when it was shipped from the factory.

5. Damages to finish after installation.

6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).

This warranty does not cover the following:

1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES

RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.

Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation

or exclusion may not apply to you.

2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary

household use. The consumer shall pay for such service calls.

3. Damages caused by services performed by servicers other than Electrolux Home Products, Inc., Electrolux Canada

Corp., or their authorized servicers; use of parts other than genuine Electrolux parts; obtained from persons other

than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.

4. Products with original serial numbers that have been removed or altered and cannot be readily determined.

Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the warranty

period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This

written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service

under this warranty must be obtained by contacting Electrolux Home Products, Inc. or Electrolux Canada Corp.

FULL ONE-YEAR

WARRANTY

LIMITED WARRANTY

(Applicable to the

State of Alaska)

THROUGH OUR AUTHORIZED

SERVICERS WE WILL:

Pay all costs for repairing or replacing any parts of this

appliance which prove to be defective in materials or

workmanship.

All of the provisions of the full and limited warranties above

and the exclusions listed below apply.

WARRANTY

PERIOD

One year from original

purchase date.

Time periods listed above.

THE CONSUMER WILL BE

RESPONSIBLE FOR:

Costs of service calls that are listed under NORMAL

RESPONSIBILITIES OF THE CONSUMER.*

Costs of the technician's travel to the home and any costs

for pick up and delivery of the appliance required because

of service.

2004_02

This warranty only applies in the 50 states of the U.S.A., Puerto Rico, and Canada. Product features or specifications as described or illustrated are subject to change without

notice. All warranties are made by Electrolux Home Products, Inc. or Electrolux Canada Corp.

In the U.S.A., your appliance is warranted by Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. We authorize

no person to change or to add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed

by us or an authorized servicer.

USA

800•944•9044

Electrolux Home Products, Inc.

P.O. Box 212378

Augusta, GA 30917

Canada

866•294•9911 (English or French)

Electrolux Canada Corp.

6150 McLaughlin Road

Mississauga, Ontario, Canada

L5R 4C2

Your Wall Oven is protected by this warranty

318200929 (0407) Rev. A

Bienvenue ............................... 2

Garantie ................................. 16

Avant de faire appel au

service après-vente

........................................... 14-15

Ajustement de la

température du four ............. 13

Entretien et

nettoyage.......................... 10-13

Informations

de cuisson ............................ 7-9

Réglage des commandes

du four...................................... 6

Avant l’utilisation

du four...................................... 6

Caractéristiques

de l'appareil ............................. 5

Mesures de sécurité

importantes .......................... 3-4

Solutions aux problèmes courants

Four encastré

électriqueélectrique

électrique

Simple et Double

Emplacement de la

plaque de série

Emplacement de la

plaque de série sur les

modèles simples.

Emplacement de la

plaque de série sur

les modèles doubles.

Bienvenue et félicitations

Versión en español

Si desea obtener una copia en español

de este Manual del Usuario, sírvase

escribir a la dirección que se incluye a

continuación. Solicite la P/N

318200924E.

Spanish Use & Care Manual

Electrolux Home Products

P. O. Box 212378

Augusta, GA 30917

Des questions?

1-800-944-9044

(États-Unis)

1-866-294-9911

(Canada)

Apposez ici votre reçu pour toute

référance future.

Félicitations, vous venez d’acheter un nouveau four à encastrer! Chez Electrolux

Home Products, nous sommes très fiers de nos produits et nous nous engageons

à vous fournir le meilleur service possible. Vous satisfaire constitue la première

de nos priorités.

Nous savons que votre nouveau four à encastrer vous plaira et nous vous

remercions d’avoir choisi nos produits. Nous espérons que vous nous ferez

confiance pour vos futurs achats.

LISEZ ATTENTIVEMENT CES INSTRUCTIONS ET CONSERVEZ-LES

PRÉCIEUSEMENT

Ce manuel donne des instructions générales pour votre appareil et des

renseignements s’appliquant à plusieurs modèles. Votre appareil peut ne pas

avoir toutes les caractéristiques décrites. Les figures montrées dans ce manuel

sont représentatives et peuvent ne pas illustrer identiquement les caractéristiques

de votre appareil. Les instructions données dans ce guide ne couvrent pas toutes

les conditions et situations possibles. Faites preuve de bon sens et de prudence

lors de l’installation, de l’emploi et de l’entretien de tout appareil ménager.

Inscrivez ci-dessus le modèle et le numéro de série de votre appareil.

Numéro de modèle:

Numéro de série:

Date d’achat:

Enregistrement de l’appareil

Enregistrer l’appareil

La CARTE D’ENREGISTREMENT doit

être remplie en entier et retournée à

Electrolux Canada Corp.

• Entretien par l'usager—Ne réparez pas ou ne

remplacez pas des pièces de l'appareil à moins d'une

recommandation précise dans les guides. Toutes les

réparations doivent être faites par un technicien qualifié,

afin de réduire les risques de blessure et de dommage à

l'appareil.

• Ne modifiez jamais l'appareil, que ce soit en enlevant

des panneaux, protège-fils, ou toute autre pièce.

• Enlevez la porte de tout appareil inutilisé qui doit être

entreposé ou mis aux rebuts.

Il peut être dangereux pour les

personnes ou dommageable pour l'appareil de monter,

s'appuyer, ou s'asseoir sur la porte de l'appareil. Ne

permettez pas aux enfants de grimper ou de jouer autour de

l'appareil.

• Rangement dans ou sur l'appareil—Ne rangez pas dans

le four des matériaux inflammables. Ceci inclus papiers,

plastiques, tissu, livres de cuisine, objets en plastique et

torchons, ainsi que des liquides inflammables. N'y déposez

pas ou ne rangez pas des produits explosifs comme une

bombe aérosol. Les produits inflammables pourraient

exploser, allumer un feu ou causer des dommages

matériels.

N'utilisez pas l'appareil pour

entreposer des articles.

Ne rangez pas des articles pouvant

intéresser les enfants dans les armoires au-dessus de

l'appareil.

• Ne laissez pas les enfants seuls ou sans surveillance

dans un lieu ou un appareil fonctionne. Ne les laissez

jamais s'asseoir ou se tenir debout sur une pièce

quelconque de l'appareil.

• NE TOUCHEZ PAS AUX ZONES SITUÉES PRÈS DES

ÉLÉMENTS OU AUX ÉLÉMENTS À L'INTÉRIEUR DU

FOUR. Les éléments du four peuvent être encore chauds

même si leur couleur est foncée. Les surfaces près des

éléments peuvent devenir suffisamment chaudes pour

causer des brûlures. Pendant et après l'utilisation du four,

• Enlevez tout le ruban et le matériau d'emballage avant

d'utiliser l'appareil. Détruisez le cartonnage et les sacs

en plastique après le déballage de l'appareil. Ne laissez

jamais les enfants jouer avec le matériau d'emballage.

N'enlevez pas l'étiquette de câblage et les autres

instructions se trouvant à l'arrière du four encastré.

N'enlevez pas la plaque signalétique qui comprend le

numéro de modèle et de série.

• Installation—Assurez-vous que l'appareil est

correctement installé et mis à la terre par un technicien

qualifié conformément à la dernière édition de la

norme ANSI/NFPA No.70 du National Electrical Code

aux États Unis ou à la dernière édition de la norme

ACNOR C22.1 du code d'électricité du Canada, partie 1

et aux codes locaux qui s'appliquent. N'installez

l'appareil que selon les instructions d'installation fournies

dans la documentation.

Demandez à votre marchand de vous recommander un

technicien qualifié ainsi qu'un centre de réparation autorisé.

Sachez comment couper le courant électrique de l'appareil à

la boîte de fusibles ou au coupe-circuit en cas d'urgence.

Les températures froides peuvent

endommager le contrôleur électronique. Si c'est la

première fois que vous faites fonctionner l'appareil, ou

qu'il n'a pas été utilisé depuis longtemps, assurez-vous

que celui-ci a été exposé à une température au dessus de

0°C/32°F pendant au moins 3 heures avant de mettre

l'appareil sous tension électrique.

• Tous les fours à encastrer peuvent se

renverser.

• Il peut en résulter des blessures.

• Installez les supports anti-

renversement fournis avec l'appareil.

• Voyez les instructions d'installation.

Lisez ces instructions avant d’utiliser l’appareil.

Conservez ces instructions pour références futures.

Ce guide contient des instructions et symboles de sécurité importants. Veuillez faire particulièrement attention à ces symboles

et suivre les instructions données. Voici une brève explication de ces symboles.

Ce symbole vous prévient des situations qui risquent d'entraîner de graves blessures, la mort ou des

dommages matériels.

Ce symbole vous prévient des situations pouvant entraîner des blessures ou dommages matériels.

Mesures de sécurité importantes

Pour reduire le risque de renversement du four, celui-

ci doit être correctement fixé par des supports anti-

renversement, fournis avec le four. Reportez-vous aux

instructions d'installation pour connaître l'installation

des supports anti-renversement.

de la retirer. Pour déplacer une grille lorsque le four est

chaud, soyez extrêmement prudent. Utilisez des gants

isolants et tenez la grille fermement avec les deux mains

pour la remettre en place. Ne touchez pas l'élément chaud

ou l'intérieur du four avec les gants isolants.

• Ne vous servez pas de la lèchefrite sans utiliser le

couvercle qui l'accompagne. Le couvercle permet à la

graisse de s'égoutter au fond de la lèchefrite, à l'abri de la

chaleur intense du gril.

• Ne recouvrez pas le couvercle de la lèchefrite de papier

d'aluminium. L'huile et la graisse qui s'y accumulent

peuvent prendre feu.

• Ne touchez pas l'ampoule du four avec un linge mouillé

pendant qu'elle est chaude. Si vous le faites, elle risque

de se briser. Débranchez l'appareil ou coupez le courant

avant d'enlever l'ampoule et de la remplacer.

INSTRUCTIONS IMPORTANTES POUR LE

NETTOYAGE DE VOTRE FOUR

• Nettoyez régulièrement votre four pour enlever la

graisse sur toutes ses parties, car cette graisse risque

de prendre feu. Le ventilateur d'évacuation de la hotte et

les filtres de graisse doivent demeurer propres en tout

temps. Ne laissez pas la graisse s'y accumuler. Les

accumulations de graisse dans le ventilateur pourraient

prendre feu. Reportez-vous aux instructions du fabricant

sur le nettoyage de la hotte.

• Nettoyants/Aérosols—Suivez toujours les

recommandations du fabricant, quant à leur utilisation.

Sachez que les résidus excessifs de nettoyeurs et

d'aérosols risquent de prendre feu et de causer des

dommages et/ou des brûlures.

FOURS AUTONETTOYANTS:

• Ne nettoyez dans le cycle autonettoyant que les parties

du four énumérées dans le présent Guide de

l'utilisateur. Avant d'utiliser le cycle autonettoyant,

enlevez la lèchefrite et tout ustensile se trouvant dans le

four.

• Ne nettoyez pas le joint d'étanchéité de la porte. Ce joint

d'étanchéité est essentiel à une bonne étanchéité. Veillez à

ne pas le frotter, l'endommager ou le déplacer.

• N'utilisez pas de nettoyeur commercial pour four. Vous

ne devez utiliser aucun nettoyeur commercial pour four, ni

aucun enduit protecteur à l'intérieur ou sur toute partie du

four.

Certains oiseaux sont très vulnérables aux

gaz dégagés lors du nettoyage des fours auto-nettoyants; ils

doivent être placés dans un autre pièce, bien aérée.

Mesures de sécurité importantes

éviter de toucher à ces endroits avec des tissus, vêtements

ou autres matériaux inflammables jusqu'à ce que le four ai eu

le temps de refroidir. Ces endroits incluent entre autres la

sortie de la bouche d'aération, la porte du four et le hublot.

• Portez des vêtements appropriés—Ne portez jamais des

vêtements amples ou flottants en utilisant cet appareil.

Ne laissez pas les matériaux inflammables et les vêtements

venir en contact avec des surfaces chaudes.

N'utilisez jamais votre appareil pour

réchauffer ou chauffer une pièce.

• N'éteignez pas de feu de friture avec de l'eau ou de la

farine—Éteignez les feux avec un couvercle, ou du

bicarbonate de soude, ou avec un extincteur à poudre

sèche ou à mousse.

• En chauffant de l'huile ou de la graisse, restez près de

l'appareil. La graisse ou l'huile peuvent prendre feu si elles

devenaient trop chaudes.

• N'utilisez que des gants isolants secs—Des gants

isolants mouillés ou humides en contact avec des

surfaces chaudes peuvent causer des brûlures par la

vapeur . Ne laissez pas les gants isolants toucher les

éléments. Ne vous servez pas de torchon ni de chiffon à la

place d'un gant isolant.

• Ne chauffer pas des contenants non ouverts—

L'accumulation de pression peut faire exploser le

contenant et blesser.

IMPORTANT—N'essayez pas de faire fonctionner

l'appareil pendant une panne de courant. Lorsqu'il se

produit une panne de courant, éteignez toujours le four. Si

ce dernier n'est pas éteint, il recommencera à chauffer lorsque

le courant reviendra. Les aliments laissés sans surveillance

pourraient prendre feu ou se détériorer.

INSTRUCTIONS IMPORTANTES POUR

L'UTILISATION DE VOTRE FOUR

• Soyez prudent en ouvrant la porte du four—Tenez-vous

sur le côté de l'appareil pour ouvrir la porte d'un four chaud.

Laissez d'abord l'air chaud ou la vapeur s'échapper avant de

retirer ou de placer des aliments dans le four.

• Ne bloquez pas les orifices d'aération. La ventilation du

four se fait par la moulure centrale. Toucher les surfaces de

cette zone pendant le fonctionnement du four peut causer de

graves brûlures. De plus, ne placez aucun objet en plastique

ou conducteur de chaleur à proximité de l'évent. Il risque de

fondre ou de prendre feu.

• Installation des grilles du four. Disposez toujours les

grilles à l'emplacement désiré lorsque le four est froid.

Enlevez tous les ustensiles qui se trouvent sur la grille avant

La page est en cours de chargement...

Frigidaire 318200929 Manuel utilisateur

Marque: Frigidaire

Modèle: 318200929

Catégorie: Cuisinières

Taper: Manuel utilisateur

Ce manuel convient également à

Oven 318200929

Télécharger le PDF

rapport

dans d''autres langues

English: Frigidaire 318200929 User manual

Frigidaire 318200929 Manuel utilisateur

Ce manuel convient également à

Frigidaire 318200929 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents