SportsArt P752 Le manuel du propriétaire

Catégorie
Fitness, gymnastique
Taper
Le manuel du propriétaire

Ce manuel convient également à

P751/P752 OWNER’S MANUAL CONTENTS
1. INTRODUCTION ................................................................................ 2
2. SAFETY PRECAUTIONS .................................................................. 3
3. LIST OF PARTS ................................................................................. 4
4. ASSEMBLE THE PRODUCT ............................................................. 9
STEP 1 Cover Support Plate and the Connector Installation ................ 9
STEP 2 Handle Installation ................................................................... 13
STEP 3 Weight Stack Installation ......................................................... 14
STEP 4 Cable Installation .................................................................... 18
STEP 5 Leg Cushion Pivot Assembly Installation ................................ 24
STEP 6 Seat Back and Seat Bottom Installation .................................. 26
STEP 7 Apply the Weight Stack Sticker ................................................ 27
STEP 8 Front Cover and Rear Cover Installation ................................. 28
STEP 9 Top Covers Installation ............................................................ 29
STEP 10 Storage Tray Installation ........................................................ 30
STEP 11 Cable Adjustment .................................................................. 31
STEP 12 Stack Fork Inspections .......................................................... 32
5. OPERATION INSTRUCTION ............................................................ 33
6. MAINTENANCE ................................................................................ 34
MAINTENANCE Schedule .................................................................... 35
MAINTENANCE Task List .................................................................... 36
MAINTENANCE One-Year Maintenance Log ....................................... 37
7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 38
2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the P751/P752
Abduction/Adduction machine. Constructed of high quality materials and designed for
years of reliable performance, this product was made for full commercial use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of
this product will help ensure that exercisers obtain their tness goals safely and
successfully.
P751
P752
3
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain precau-
tions apply during the use of this product. Please note the following safety precau-
tions:
Please read the entire manual before assembly and operation. Make sure the
product is installed and operated as instructed in this manual.
Assemble and operate the product on a solid, level surface. Do not use outdoors
or near water, including pools and saunas.
Check the product before every use. Make sure all parts are assembled, and all
fasteners are tightened. Do not use the product if it is disassembled in any way.
Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes
with leather soles or high heels. Tie all long hair back. Do not go barefoot on this
product.
Keep away from moving parts. Moving parts may or may not stop immediately if
an object becomes caught or impedes normal motion.
Use this product only for its intended purpose as described in this manual.
Be careful when mounting and dismounting the unit.
Never operate this product if it has been damaged in any way. If it is not work-
ing properly, or has been dropped or damaged, contact a service technician for
repairs.
Do not use accessories that are not specifically recommended by the manufac-
turer. Such parts might cause injuries or cause the unit to fail.
This product is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or by people who are otherwise defi-
cient in product knowledge or experience. If such people use this product, they
should be given training and be supervised at all times by someone responsible
for their safety.
Children should be supervised to ensure that they do not play on or near the
product.
The user weight limit for this product is 227 kg, 500 lb.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-
OUT and consult your physician immediately. Work within your recommended ex-
ercise level. DO NOT work to exhaustion. Before beginning any exercise program,
you should consult with your doctor. It is recommended that you undergo a complete
physical examination.
*NOTE: Regarding the decaled resistance on the unit weight stack, the actual weight
being lifted is configured at a ratio of 1:1. Example: If the stack fork is engaged at
60KG (132LB) at the weight stack, the actual pulling weight is 60KG (132LB).
4
3. LIST OF PARTS
Box A
5
Box B
Box C
P752
6
Box A - Main Frame Components
No. Name Qty. No. Name Qty.
A1
Weight stack top right
cover
1 A9 Cover bracket 4
A2
Weight stack top left
cover
1 A10 Cover support plate A 2
A3 Main frame 1 A14 Rear cover 1
A4 Cover support plate B-2 1 A15 Front cover 1
A5 Cover support plate B-1 1 A16 Bracket 2
A6 Storage tray 1 A17 Bracket 4
A7 Stack fork 1
A8 Weight stack rod 1
Box B - User Frame Components
No. Name Qty. No. Name Qty.
A20 Seat back 1 A24 Connector B 1
A21 Seat bottom 1 A25 Connector A 1
A22 Seat frame 1 A26
Ø50 Connecting board
A
2
A23
Leg cushion pivot
assembly
1
Box C - Weight Plates Components
No. Name Qty. No. Name Qty.
A30 5kg/11lb weight plate 12 A32
Weight plate sticker
(65kg~100kg/143lb
~220lb)
1
A31
Weight plate sticker
(10kg~60kg/22lb
~132lb)
1
7
Components on the Product
No. Name Specication Notes
30
Mushroom top inner hex screw M6*P1.0*L12
Spring washer M6
Flat washer D20*d6.3*t1.5
Pulley cover
Pulley
31
Mushroom top inner hex screw M6*P1.0*L12
Spring washer M6
Flat washer D20*d6.3*t1.5
Cover
Axle D15*L26
Pulley D126*20
32
Mushroom top inner hex screw M6*P1.0*L12
Flat washer D20*d6.3*t1.5
Components in the Hardware Kit
No. Name Qty. Specication Notes
10 Screw socket 8 SGN-07
11 Mushroom top inner hex screw 12 M6*P1.0*L12
12 Mushroom top Phillips screw 8 M5*L15
13 Mushroom top Phillips screw 10 M5*P0.8*L8
14 Ronund head Phillips screw 6 M6*P1.0*L12
16
Round head inner hex screw 2 M6*P1.0*20
Bushing 2 D21.5*10.5
17
Hex head screw 4 M10*P1.5*L130
Spring washer 4 M10
Washer 8 D16*d10.2*t1.0
Nylon hex lock nut 4 M10
L-shaped Allen wrench 2 (M4)
L-shaped Allen wrench 1 (M5)
L-shaped Allen wrench 1 (M6)
L-shaped Allen wrench 1 (M8)
Open end wrench 2 (13*17)
Phillips-head screw driver 1
8
Components on the Product
No. Name Specication Notes
33 Upper stack carriage set
34
Hex head screw M8*P1.25*L65
Flat washer D17*d8.3*t2
PU tube D12*d8*L51
Nylon hex lock nut M8
35 Guide rod
36
Round head inner hex screw M8*P1.25*L18
Spring washer M8*t2.0
Flat washer D17*d8*t1.5
37
Mushroom top inner hex screw M6*P1.0*L12
Flat washer D13*d6*t1.0
38
Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
39 Mushroom top inner hex screw M8*P1.25*L15
40
Mushroom top inner hex screw M6*P1.0*L12
Flat washer D20*d6.3*t1.5
41 Bevelled head Phillips screw M5*L8
42
Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
Washer D18*d8.5*t2
43
Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
Flat washer D22*d8.2*t2
44
Hex head screw M8*P1.25*L25
Flat washer D22*d8.2*t2
Rubber Bumper
45
Hex head screw M10*P1.5*L30
Spring washer M10
Washer D16*d10.2*t1.0
Hex lock nut M10
46
Pin D7.8*L40.5
Bushing D12.9*d8*4
Flat washer D17*d8.3*t1
Cotter pin
47 Bushing D20*d15.1*L9.8
9
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual
the words “left” and “right” are used to refer to the product and its parts. As
such, these designations correspond to the “left” and “right” sides of a person
in position to exercise on this product. Also, for brevity, the word “screws” or
“nuts” is used where washers and other hardware may be involved.
STEP 1 Cover Support Plate and the Connector Installation
10
(a). Insert the screw sockets (10) into place in the main frame (A3) as
shown, and then use the screws (11) (12) to secure the brackets (A16)
(A17) in place.
(Note: The bracket (A16) must be secured to the top of maim frame as
shown.)
(a)
11
(b). Use the screws (13) to secure the cover support plates (A10) to the
straight frame of the main frame (A3) and then secure the cover
support plates (A4) (A5) to the both side of the curved frame as shown.
(Note: The cover support plates must be secured outside of the bracket
(A16) (A17).)
(b)
12
(c). Use the screws (17) to secure the connecting board A (A26) to the
connector B (A24) and the main frame (A3).
(d). Use the screws (17) to secure the connecting board (A26) to the
connector B (A24) and the seat frame (A22).
(e). Use the screws (45) to secure the connector A (A25), the main frame
(A3) and the seat frame (A22) as shown.
(c)
(d)
(e)
13
(b)
(a)
STEP 2 Handle Installation
(a). Remove the pin set (46) from the seat frame (A22).
(b). Set the handle in place of the seat frame (A22) as shown and then
install the pin set (46) back into place.
14
STEP 3 Weight Stack Installation
15
(a). Hold the upper stack carriage set (33), and then cut the zip tie. Gently
lower the upper stack carriage set (33) into place as shown.
(b). Remove the screws (34). Set the guide rod (35) downward into place as
shown.
(c). Tilt the guide rod (35) backward and then lift the upper stack carriage
set (33) off the guide rods as shown. Carefully set the upper stack
carriage set (33) aside.
(c)
(a)
(b)
16
(d). Loosen and remove the screws (36) from the stack fork (A7) and insert
the weight stack rod (A8) into the central mounting position of the upper
stack carriage set (33). Use the screws (36) to secure the stack fork
(A7) into place of the upper stack carriage set (33) as shown.
(Note: Remove the stack fork first before assembling.)
(e). Insert and lower the (5 kg/11lb) weight plates (A30) into place on the
guide rods (35) one at a time. Once complete, slide down the upper
stack carriage set (33) on top of the weight stack.
(Note: The convex side of weight plate should face up and the stack
fork (A7) points toward the front.)
* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the
optional weight plates first before the (5 kg/11lb) weight plates (A30).
(e)
(d)
17
(f). Tilt the guide rods (35) back into place and then lift them up to their
mounting position, and then secure the assembly with the screws (34).
(f)
18
STEP 4 Cable Installation
P752
19
(a). Insert the cable nut as indicated by the arrows onto the weight stack
rod (A8) at least 15-20mm deep as shown.
(b). Loosen and remove the screws (37) and the cable route cover from the
seat frame (A22) as shown.
(a)
(b)
20
(c). Loosen and remove the screws (30) from the pulley in area A, the
screws (31) from the pulley in area B and the screws (32) or bushing
(47) from the pulley in area C as shown.
A
B
C
(c)
C
A
B
P752
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

SportsArt P752 Le manuel du propriétaire

Catégorie
Fitness, gymnastique
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues