VDLLPLx1
V. 02 – 08/09/2017 5 ©Velleman nv
Installation
The carrying construction must be able to support 10 times the weight
of the device for 1 hour without deforming.
Never stand directly below the device when it is being mounted,
removed or serviced. Have a qualified technician check the device once
a year and once before you bring it into service.
Install the device in a location with few passers-by that is inaccessible
to unauthorised persons.
Make sure there is no flammable material within a 0.5 m radius of the
device.
7. Operation
Do not use the device when damage to housing or cables is
noticed. Do not attempt to service the device yourself but contact
an authorised dealer.
1. Insert the plug of the included power supply into the power input [2]
located on the base of the warning light. The warning light will switch
on automatically.
2. Adjust the rotation speed with the speed adjustment knob [3]. Turn
left to decrease or right to increase.
3. Disconnect the power source after use.
8. Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1. Disconnect from the power source.
2. Let the device cool down.
Cleaning
Clean the warning light with a soft cloth.
Always be sure to dry all parts completely before plugging the unit back
in.
Cleaning frequency depends on the environment in which the unit
operates (i.e. smoke, fog residue, dust, dew).
Do not immerse the device in any liquid.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation
location (e.g. ceiling, suspension, trussing) should not be deformed,
modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections…
There are no user-serviceable parts.
Refer to an authorized dealer for service and/or spare parts.