Breville BES990BSSUSC Mode d'emploi

the Oracle

‰

Touch

Instruction Book - BES990

2

BREVILLE

RECOMMENDS

SAFETY FIRST

At Breville we are very safety

conscious. We design and

manufacture consumer

products with the safety of you,

our valued customer, foremost

in mind. In addition we ask

that you exercise a degree of

care when using any electrical

appliance and adhere to the

following precautions.

IMPORTANT

SAFEGUARDS

READ ALL

INSTRUCTIONS BEFORE

USE AND SAVE FOR

FUTURE REFERENCE

• Carefully read all

instructions before

operating and save for

future reference.

• Do not touch hot surfaces.

Use handles or knobs as

advised in this instruction

book.

• To protect against ﬁre,

electric shock and injury

to persons do not immerse

the power cord, plug, or

appliance itself in water or

other liquids.

• Close supervision is

necessary when any

appliance is used by or near

children.

2 Breville recommends safety ﬁrst

7 Components

9 Oracle Touch Features

10 Assembly

11 Functions

17 Tips

19 Care & Cleaning

23 Troubleshooting

27 French

Contents

3

• If the appliance is to be:

- left unattended

- cleaned

- moved

- assembled or

- stored

Always switch off the

appliance by pressing the

POWER button to off and

unplug from the power

outlet.

• Always allow the appliance

to cool before cleaning,

moving or storing.

• It is recommended to

regularly inspect the

appliance and power cord.

Do not use the appliance

if there is damage to the

power cord or plug, or after

the appliance malfunctions

or has been damaged in

any way.

Immediately stop use and

call Breville Consumer

Support.

• The use of accessory

attachments not

recommended by Breville

may result in ﬁre, electric

shock or injury to persons.

• Do not let the power cord

hang over the edge of a

table or counter-top, or

touch hot surfaces.

• Do not place the appliance

near the edge of a table or

counter-top. Ensure the

surface is level, clean and

free of water and other

substances.

• Do not place the appliance

on or near a hot gas or

electric burner. Do not

place it in, or allow it to

come in contact with a

heated oven.

• This appliance is

recommended for

household use only. Do

not use this appliance for

anything other than its

intended use. Do not use

outdoors. Do not use in

moving vehicles or boats.

4

SPECIFIC

INSTRUCTIONS

FOR BES990

• It is recommended to plug

the espresso machine into

a properly grounded and

dedicated circuit, separate

from other electrical

appliances.

• Avoid contact with moving

parts.

• Check bean hopper for

presence of foreign objects

before using.

• Use only cold water in

the water tank. Do not

use any other liquids. Do

not use highly ﬁltered,

demineralized or distilled

water as this may affect

the taste of the coffee and

how the espresso machine

operates.

• Ensure the portaﬁlter

is ﬁrmly inserted and

secured into the group

head before starting an

extraction. Never remove

the portaﬁlter during the

extraction process.

• Use caution after milk

texturing as the auto purge

function will purge hot

steam when the steam

wand is lowered.

• Caution must be used

during descaling as hot

steam may be released.

Before descaling, turn

off the machine, allow

to cool for at least 1 hour

and ensure the drip tray is

empty and fully inserted.

For instructions, refer

to 'Descale', page 22.

• Do not attempt to open

or service the espresso

machine.

• For any maintenance other

than cleaning, call Breville

Consumer Support or

visit a Breville Authorized

Servicer.

5

SHORT CORD

INSTRUCTIONS

Your Breville appliance is

ﬁtted with a short power

cord to reduce personal

injury or property damage

resulting from pulling,

tripping or becoming

entangled with a longer

cord. Longer detachable

power cords or extension

cords are available and may

be used if care is exercised.

If an extension cord is used,

(1) the marked electrical

rating of the cord set or

extension cord should

be at least as great as the

electrical rating of the

appliance, (2) the cord

should be arranged so

that it will not drape over

the counter-top or table

where it can be pulled

on by children or tripped

over unintentionally and

(3) the extension cord

must include a 3-prong

grounding plug.

CALIFORNIA

PROPOSITION 65:

(Applicable to California

residents only).

This product contains

chemicals known to the

State of California to cause

cancer, birth defects or other

reproductive harm.

BREVILLE ASSIST

®

PLUG

Your Breville appliance

comes with a unique

Assist

®

Plug, conveniently

designed with a ﬁnger hole

to ease removal from the

power outlet.

6

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

CSA DUTY CYCLE

MARKING

The Canadian Standards

Authority requires any

appliances capable of

drawing over 1500W to be

marked with a ‘duty cycle’

in minutes. For the BES990,

this ‘duty cycle’ represents

the maximum time for

which the appliance will

draw over 1500W during

any 2 hour period of

use. It does not indicate

the appliance is unsafe

for continuous use or is

required to be switched off

at certain intervals during

normal use.

7

Components

A. Integrated conical burr grinder

with removable ½lb bean hopper

B. Top-ﬁll 84 ﬂ.oz (2.5L) removable water

tank with integrated water ﬁlter and backlit

level indicator

C. Grind size dial

adjust grind size to suit your coffee beans

D. Touch screen control panel

displays current settings and provides

touch interface

E. Grind outlet

with auto grind, dose & tamp function

F. Heated 58mm group head with

embedded element

G. 58mm full stainless steel portaﬁlter

H. Drop down swivel foot

lifts the machine upwards for

easy maneuverability

I. Heated cup warming tray

J. Cool touch steam wand

with integrated temperature sensor for

automatic frothing

K. Dedicated hot water outlet

delivers hot water for Americano

and pre-heating cups

L. Descale access point

M. Tool storage tray

houses accessories when not in use

N. Removable drip tray

with Empty Me! indicator

G

H

E

D

F

B

C

A

J

L

N

M

K

I

8

A

E

F

I

G

H

J

D

C

K

L

M

B

A. Stainless steel milk jug

B. 2 cup ﬁlter basket

C. 1 cup ﬁlter basket

D. Water ﬁlter holder with ﬁlter

E. Cleaning disc

F. Mini grinds bin

G. Grinder burr brush

H. Grind outlet brush & tamp

removal magnet

I. Cleaning tool for steam wand tip

J. Two allen keys

K. Steam wand cleaning powder

L. Water hardness test strip

M. Espresso cleaning tablets

ACCESSORIES

9

COLOR TOUCH SCREEN

CONTROL PANEL

Swipe & Select from the drinks menu. Adjust

your coffee strength, milk texture or milk

temperature, then save it as your personal

favorite.

HANDS FREE AUTOMATIC

GRIND, DOSE & TAMP

Automatically grinds, doses and tamps the

required amount of coffee, mess free.

GRIND SIZE DIAL

Adjustable grind settings from ﬁne to coarse

for optimal espresso extraction.

STAINLESS STEEL CONICAL BURRS

Maximize ground coffee surface area for a full

espresso ﬂavor.

AUTOMATIC HANDS FREE

MILK TEXTURING

Automatically textures milk to the selected

temperature and style from silky smooth

latté to creamy cappuccino. Automatic purge

removes residual milk from the steam wand

when returned to the downward position.

SIMULTANEOUS COFFEE & STEAM

Two stainless steel boilers each dedicated to

espresso and steam for simultaneous milk

texturing and espresso extraction.

PRECISION CONTROL

Electronic PID Temperature Control

Electronic temperature control delivers precise

water temperature for optimum espresso ﬂavor.

Actively Heated Group Head

Commercial size 58mm group head with

embedded element for thermal stability during

extraction.

Regulated Extraction Pressure

Over pressure valve (OPV) limits maximum

pressure for optimal espresso ﬂavor.

Low Pressure Pre-Infusion

Gradually increases water pressure to gently

expand grinds for an even extraction.

Dual Pumps

Dedicated Italian made espresso and steam

boiler pumps.

Programmable Shot Temperature

Adjust water temperature to achieve optimal

espresso ﬂavor depending on coffee origin and

degree of roast.

ADDITIONAL FEATURES

Auto Start

Switches machine on at a speciﬁed time.

Auto Off

Switches machine off after a speciﬁed time

from 0.5 to 8 hours.

Oracle Touch

Features

10

Assembly

BEFORE FIRST USE

Machine Preparation

Remove and discard all labels and packaging

materials attached to your espresso machine.

Ensure you have removed all parts and

accessories before discarding the packaging.

Remove the water tank located at the back of

the machine by pulling down the water tank

handle. Remove the plastic bag containing the

water ﬁlter and water ﬁlter holder. Clean parts

and accessories (water tank, portaﬁlter, ﬁlter

basket, jug) using warm water and a gentle dish

washing liquid. Rinse well then dry thoroughly.

TIP

To easily manoeuvre your machine, use the

drop down swivel foot located under the drip

tray. When turned to UNLOCK, the swivel

foot drops down & lifts the machine upwards,

making it easier to access the removable water

tank or reposition the machine to another

location.

INSTALLING THE WATER FILTER

• Remove the water ﬁlter and water ﬁlter holder

from the plastic bag.

• Soak the ﬁlter in a cup of water for 5 minutes

then rinse under cold running water.

• Wash the ﬁlter holder with cold water, taking

speciﬁc care to rinse the stainless steel mesh.

Soak filter for 5 minutes Rinse filter & mesh

• Insert the ﬁlter into the two parts of the ﬁlter

holder.

Place filter into

filter holder

• To install the assembled filter holder into the

water tank, align the base of the ﬁlter holder

with the adapter inside the water tank. Push

down to lock into place.

• Fill the water tank with cold water before

sliding back into position at the back of the

machine and locking into place.

NOTE

DO NOT use highly ﬁltered, demineralized or

distilled water in this machine. This may affect

the taste of the coffee and how the machine

operates.

11

Functions

FIRST USE

1. Press POWER button to turn the machine

on.

2. Follow the instructions on screen to guide

you through ﬁrst use setup.

3. After completing setup, the machine will

tell that it is ready to use.

Select the guide to find out more about your Oracle Touch

or to exit and proceed to your drink selection

Guide

Your Oracle is now ready to use

The machine is now in STANDBY mode.

4. Touch "Guide" and the machine will guide

you step by step to make your ﬁrst coffee.

Touch the



and go to the Drinks Menu or

<

to repeat the Setup. To repeat the Guide at

any time, go to Settings Menu.

NOTE

If your water hardness is either 4 or 5 when

tested, we strongly recommend you change to

an alternate water source.

Filtered, bottled spring or mineral water will

extend both the life of your built-in filter and

descale intervals as well as superior taste.

Please ensure to test the water hardness of the

alternative water source you've chosen and

input into the machine accordingly. Avoid

using overly filtered water, like RO water

unless some mineral content is being added

back to the ﬁnal water. Never use distilled

water, or water with no or low mineral content

as this will affect both the taste and the

functioning of your machine.

GRINDING OPERATION

Insert bean hopper into position on-top of the

machine. Turn dial to lock into place.

Fill hopper with fresh beans.

TIP

We recommend quality 100% Arabica beans

with a 'Roasted On' date stamped on the bag,

not a 'Best Before' or 'Use By' date. Coffee beans

are best consumed between 5–20 days after

the 'Roasted On' date. Stale coffee may pour too

quickly from the portaﬁlter spouts and taste

bitter and watery.

12

DRINK SELECTION

To enter Drinks Menu screen, touch the Home icon . Swipe & select your drink.

Touch the 'Help & Tip' icon

to see Oracle Touch Guide.

Americano

Select your drink

Espresso

Latte Flat White

Cappuccino

NOTE

Please keep the touch screen dry and clean to ensure that the machine functions properly.

DRINK SCREEN

In this screen, you can adjust your drink by touching the oval shaped buttons. You cannot adjust

the Grind Size by touching the button, use the dial on the side of the machine.

65º 08

MilkGrind

20

Cappuccino

Brew

Single

Hot Water

'Home' icon 'Setting' icon

Milk froth levelGrind size

Adjust using the

dial on the side

of the machine

Milk temperatureBrew setting: touch this button to scroll

Espresso - single shot / double shot /

custom extraction time

Americano - small / medium / large

Drink chosen

13

SELECTING GRIND SIZE

We recommend you start at No. 30 and adjust

as required to control espresso ﬂow rate.

There are 45 grind size settings (No.1 – ﬁnest,

No. 45 – coarsest) to enable you to select the

right grind size for your coffee beans and

achieve the perfect espresso extraction.

To select grind size, rotate the grind size dial

counter-clockwise to increase grind coarseness

or clockwise to increase grind ﬁneness.

SELECTING YOUR FILTER BASKET

Insert the correct Filter Basket into the

Portaﬁlter for the number of coffees or

strength you are making.

Use the 1 Cup Filter Basket for making a single

cup or a weaker tasting espresso.

Use the 2 Cup Filter Basket for making 2 cups

or a stronger tasting espresso, usually for mugs

or larger cups.

NOTE

When switching between the 1 Cup & 2 Cup

Filter Baskets, you may need to adjust the grind

size to ﬁne tune your extraction.

AUTO GRIND DOSE & TAMP

Align portaﬁlter handle with the INSERT

position on the grind outlet. Lift to insert

portaﬁlter into the grind outlet and rotate

to the center position.

GRIND OUTLET

GROUP HEAD

CENTER

POSITION

GRIND OUTLET

To start the auto grind, dose & tamp function,

touch the Grind button on the display.

Grinding will commence.

When the auto grind, dose & tamp function is

complete, rotate the portaﬁlter handle to the

INSERT position and lower to remove.

ESPRESSO EXTRACTION

Align portaﬁlter handle with the INSERT

position on the group head. Lift to insert

portaﬁlter into the group head and rotate

towards the LOCK TIGHT position until

resistance is felt.

Touch the 'Brew' button on the display to start

extraction. You can switch between single shot,

double shot or Custom by touching the 'Single',

'Double' or Custom button. The duration times

are preset, but can be customized.

Brew

Double

Brew

Single

Brew

Custom

22

s

MANUAL OVERRIDE

Press and hold the 'Brew' button (approx 2secs)

to enter manual extraction mode. Touch the

Brew button to start the extraction, touch the

Brew button to stop the extraction.

2 Cup

Filter Basket

1 Cup

Filter Basket

14

TEXTURING MILK

Different brands and types of milk and milk

alternatives will texture differently. You may

need to adjust the froth level accordingly.

Start with fresh cold milk. Fill milk jug to

below the spout position. Lift steam wand

and insert into milk jug. Lower steam wand,

ensuring it is fully down. The milk jug should

rest on the drip tray and milk should cover the

steam wand seal.

MIN

MAX

MILK MUST

COVER THIS

SEAL

To start, touch the 'Milk' button. The screen

will display the temperature of the milk as it

heats. Milk texturing will stop automatically

when the selected milk temperature is reached.

Lift steam wand to remove milk jug. Wipe the

wand & tip with a clean damp cloth. Lower

steam wand to the down position and the wand

will automatically purge.

NOTE

Prior to texturing milk, it is recommended to

momentarily purge the steam wand by ﬁrst

touching the 'Milk' button. Touching the button

again will stop steam delivery.

MANUAL MILK TEXTURING

Auto milk texturing and auto shut-off are

disabled during manual milk texturing mode.

Lift the steam wand. Press and hold the 'Milk'

Button (approx 2secs) to enter manual mode.

Start frothing by touching the button.

When desired temperature is reached, touch

the Milk Button to stop.

Wipe the wand & tip with a clean damp cloth.

Lower steam wand to the down position and

the wand will automatically purge.

CAUTION: BURN HAZARD

Pressurized steam can still be released, even

after machine has been switched off.

Children must always be supervised.

AMERICANO

There are 3 preset Americano settings – small,

medium and large.

Grind dose & tamp your porta-ﬁlter & insert

into the group head. Position your cup

underneath the porta-ﬁlter spouts & the hot

water spout. Espresso will be extracted ﬁrst, the

hot water is delivered automatically after the

espresso.

PRESET

CUP SIZE

AMOUNT

BREWED

Small Approx. 6oz / 180ml

Medium Approx. 8oz / 240ml

Large Approx. 12oz / 360ml

The brewed amounts are approximate only.

Actual amounts may vary due to the coffee

bean roast, blend and freshness as well as

the selected grind size. These factors affect

extraction rate and shot volume.

15

HOT WATER

The HOT WATER function can be used to pre-

heat cups or add hot water manually.

To start & stop hot water, touch 'Hot Water' on

the screen.

Hot water limit is approximately 90 seconds.

Depending on the size of your cup, you may

need to touch the 'Hot Water' button to stop

pouring.

NOTE

You cannot run hot water and extract espresso

at the same time.

ADDING NEW DRINK

Touch 'Add New' in the menu screen to create

a customized drink. You can adjust parameters

based on a standard style and

save your own.

Add New

+

Alternatively, after manually adjusting

parameters touch the small icon

to save

the current setting.

SETTINGS

To enter settings menu, touch the icon

on the upper right on the screen.

Quick Start Guide

Machine will guide you on screen, step by step

to make an actual coffee.

Auto Start

Auto Start is optional. It allows you to program

the speciﬁc time when the machine will

automatically turn on.

Time and Date

Time and Date is optional. You can set time

and date.

Clean Cycle

The Cleaning Cycle cleans the shower screen

and back-ﬂushes the group head.

A pop-up message will let you know when it

is time for cleaning.

Descale Cycle

Descaling prevents excess mineral and scale

build-up. A pop-up message will let you know

when it is time for descaling.

Brew Temperature

It allows you to adjust the recommended

extraction temperature.

Default Milk Temperature

It allows you to adjust default temperature on

all milk base drinks.

Water Hardness

It is to test water to set how often you need to

descale the machine.

Auto Off

This function sets how long the machine will

stay turned on before it automatically turns off.

Screen Brightness

You can adjust brightness of your touch screen.

Work Light Brightness

You can adjust brightness of your work light.

Sound Volume

You can adjust volume for alerts and reminders.

Demo Mode

It is for on-screen Oracle Touch demonstration

sequence.

Factory Reset

Use this function to reset all programmable

values back to the factory settings and delete all

custom drinks.

16

ADJUSTING CONICAL BURRS

Some types of coffee may require a wider grind range to achieve an ideal extraction or brew. A

feature of the built-in grinder is the ability to extend this range with an adjustable upper burr.

We recommend making only one adjustment at a time.

Move adjustable

top burr,

1 number,

coarser or finer

Remove wire

handle from

both sides of

the burr

Align the

number with

the handle

opening

8877 9

Insert wire

handle from

both sides of

the burr

10

F

I

N

E

C

O

A

R

S

E

F

I

N

E

C

O

A

R

S

E

4

5

6

7

8

F

I

N

E

C

O

A

R

S

E

F

I

N

E

C

O

A

R

S

E

Replace & lock

hopper

Remove beans Run grinder until empty Unlock & remove

hopper

Remove upper

burr

Unlock hopper

1 2 3 4 5

6

Push upper

burr firmly into

position

11

12

Lock upper burr

13

Insert hopper

14

Lock hopper

TRANSPORTING AND STORING

We recommend draining both boilers completely before transporting the machine or storing

for an extended period of time. Refer to the Descale section for the step by step instructions.

This procedure is also intended as an anti-freeze measure in the event the machine is exposed

to extreme cold temperatures.

17

Tips

PRE-HEATING

Heating your cup or glass

A warm cup will help maintain the coffee’s

optimal temperature. Pre-heat your cup by

rinsing with hot water from the hot water outlet

and place on the cup warming tray.

Heating the portaﬁlter and ﬁlter basket

A cold portaﬁlter and ﬁlter basket can

reduce the extraction temperature enough to

signiﬁcantly affect the quality of your espresso.

Always ensure the portaﬁlter and ﬁlter basket

are pre-heated with hot water from the hot

water outlet before initial use.

NOTE

Always wipe the ﬁlter basket and portaﬁlter dry

before dosing with ground coffee as moisture

can encourage ‘channeling’ where water by-

passes the ground coffee during extraction.

THE GRIND

When grinding coffee beans for espresso, the

grind size should be ﬁne but not too ﬁne. The

grind size will affect the rate at which the water

ﬂows through the ground coffee in the ﬁlter

basket and the taste of the espresso.

If the grind is too ﬁne (looks like powder and

feels like ﬂour when rubbed between ﬁngers),

the water will not ﬂow through the coffee even

when under pressure. The resulting espresso

will be OVER-EXTRACTED, dark in color and

bitter in ﬂavor.

If the grind is too coarse the water will ﬂow

through the ground coffee in the ﬁlter basket

too quickly. The resulting espresso will be

UNDER-EXTRACTED, lacking in color and

ﬂavor.

AUTOMATIC GRINDING,

DOSING & TAMPING

• Ensure hopper is ﬁlled with fresh coffee

beans. Never put pre-ground coffee in the

hopper.

• After automatic grinding, dosing & tamping,

wipe any excess coffee from the rim of the

ﬁlter basket to ensure a proper seal in the

group head is achieved.

• To adjust tamping height, please use the

allen key provided. Pull the tamping fan

down from the grind outlet, and then

loosen the fan coupling inside by rotating it

counterclockwise. You can adjust the length

of the coupling by loosening the fastener

with the allen key and rotating the coupling

to the desired length.

PURGING THE GROUP HEAD

Before placing the portaﬁlter into the group

head, run a short ﬂow of water through the

group head by touching the 'Brew' button.

Allow water to ﬂow for 5 seconds, then touch

the 'Brewing' button again to stop the ﬂow

of water. This will purge any ground coffee

residue from the group head and stabilize the

water temperature prior to extraction.

EXTRACTING ESPRESSO

• As a guide, the espresso will start to ﬂow

within 8-12 seconds (this includes pre-

infusion time) and should be the consistency

of warm dripping honey.

• If the espresso starts to ﬂow before

8 seconds, the grind is too coarse. This is

an UNDER-EXTRACTED shot. Adjust the

grind size slightly ﬁner.

• If the espresso starts to ﬂow after 12 seconds,

then the grind is too ﬁne. This is an OVER-

EXTRACTED shot. Adjust the grind size

slightly coarser.

A great espresso is about achieving the

perfect balance between sweetness, acidity

and bitterness.

18

The ﬂavor of your coffee will depend on many

factors, such as the type of coffee beans, degree

of roast, freshness, coarseness or ﬁneness of

the grind.

Experiment by adjusting these factors just one

at a time to achieve the taste of your preference.

EXTRACTION GUIDE

EXTRACTION

TYPES

GRIND

SHOT

DURATION

OVER-EXTRACTED

(bitter • astringent)

Too

Fine

Over

40secs

BALANCED Optimum

Between

25-35secs

UNDER-EXTRACTED

(underdeveloped • sour)

Too

Coarse

Less than

20secs

HINTS & TIPS

If machine runs continuously for 30 minutes,

allow machine to cool for 3 minutes before

each use.

TEXTURING MILK

• Always start with fresh cold milk.

• Fill milk jug to below the spout position. At

a minimum, there should be enough milk to

cover the steam wand seal.

• To remove any condensed water from the

system, ensure the steam wand is in the down

position over the drip tray then touch the

Milk button, allow steam to ﬂow for a few

seconds, then touch the Milk button to stop.

• When texturing milk automatically, ensure

the steam wand is fully down.

HINTS & TIPS

For optimum milk texturing performance it

is critical that the holes around the steam tip

are clear. Even partially blocked holes may

affect the ability of the steam wand to produce

sufﬁcient foam.

Always wipe the wand and tip with a damp

cloth BEFORE returning the wand to the down

position. Wiping the wand will remove the

majority of milk and allow the automatic

purge feature to more effectively remove any

residual milk.

After texturing is complete

• Tap the jug on the counter-top to collapse

any bubbles.

• Swirl the jug to polish and re-integrate

the texture.

• Pour milk directly into the espresso.

• The key is to work quickly, before the milk

begins to separate.

For manual texturing

• Lift the steam wand and insert the steam tip

0.4-0.8 inch / 1-2 cm below the surface of the

milk close to the right hand side of the jug at

the 3 o’clock position. Enter manual frothing

mode by pressing and holding the 'Milk'

button (approx 2secs), and then start frothing

by touching the button.

• Keep the tip just under the surface of the

milk until the milk is spinning clockwise,

producing a vortex (whirlpool effect).

• With the milk spinning, slowly lower the jug.

This will bring the steam tip to the surface of

the milk & start to introduce air into the milk.

You may have to gently break the surface of

the milk with the tip to get the milk spinning

fast enough.

• Keep the tip at or slightly below the surface,

continuing to maintain the vortex. Texture

the milk until sufﬁcient volume is obtained.

• Lift the handle of the jug to lower the tip

beneath the surface, but keep the vortex

of milk spinning. Use the touch screen

to monitor the milk temperature. We

recommend 131°F-149°F / 55°C–65°C.

• Touch the Milk button to stop steaming

BEFORE lowering the jug and taking the tip

out of the milk.

19

COFFEE BEAN HINTS & TIPS

• Fresh, quality coffee beans will give you the

best possible extraction.

• We recommend quality 100% Arabica beans

with a ‘Roasted On’ date stamped on the bag,

not a ‘Best Before’ or ‘Use By’ date.

• Coffee beans are best consumed between

5-20 days after the ‘Roasted On’ date. Ideally

only grind directly before the extraction to

Maximize ﬂavor.

• Buy coffee beans in small batches to reduce

the storage time.

• Store coffee beans in a cool, dark and dry

container. Vacuum seal if possible.

COLOR TOUCH SCREEN DISPLAY

Please keep the touch screen dry and clean to

ensure that the machine functions properly.

CLEANING CYCLE

• A message for cleaning will be displayed to

indicate when a cleaning cycle is required

(approx. 200 shots). Or you can start cleaning

cycle by choosing 'Clean Cycle' in 'Settings'.

The cleaning cycle cleans the shower screen

and back-ﬂushes the group head.

• Follow the instruction on the touch screen.

INSTALLING THE WATER FILTER

• Discard the used water ﬁlter. Soak a new ﬁlter

in a cup of water for 5 minutes, then rinse

under cold running water.

• Wash the ﬁlter holder with cold water, taking

speciﬁc care to rinse the stainless steel mesh.

• Insert the ﬁlter into the two parts of the ﬁlter

holder.

• To install the assembled ﬁlter holder into the

water tank, align the base of the ﬁlter holder

with the adapter inside the water tank. Push

down to lock into place.

• Fill the water tank with cold water before

sliding back into position at the back of the

machine and locking into place.

NOTE

Visit the Breville website or call Breville

Consumer Support to purchase water ﬁlters.

Care & Cleaning

20

CLEANING CONICAL BURRS

Regular cleaning helps the burrs achieve consistent grinding results which is especially important

when grinding for espresso.

13

Replace & lock

hopper

Remove beans Run grinder until empty Unlock & remove

hopper

Remove upper

burr

Unlock hopper

1 2 3 4 5

6

Clean lower

burr with

burr brush

Remove tamping

fan with tamp

removal magnet

Clean upper

burr with

burr brush

7 88 9

Clean grind

outlet with grind

outlet brush

10

Replace tamping

fan by hand

11

Push upper

burr firmly into

position

12

Lock upper burr

14

Insert hopper

15

Lock hopper

Burr brush

Tamp removal

magnet

Grind outlet

brush

La page charge ...

Breville BES990BSSUSC Mode d'emploi

Ce manuel convient également à

Breville BES990BSSUSC Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents