DF-202 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 9

STEP 1 Main Frame and Seat Frame Installation ................................. 9

STEP 2 Weight Stack Installation .......................................................... 13

STEP 3 Apply the Weight Stack Sticker ................................................. 17

STEP 4 Cable Installation ...................................................................... 18

STEP 11 Seat Back/Bottom Installation ................................................. 29

STEP 12 Covers Installation .................................................................. 31

STEP 13 Storage Tray Installation ......................................................... 36

STEP 14 Level the Product .................................................................... 37

STEP 15 Secure the Product ................................................................ 38

STEP 16 Stack Fork Inspections .......................................................... 39

STEP 17 Unit Inspection ....................................................................... 40

5. OPERATION INSTRUCTION ............................................................ 41

OPERATION Operating the Product ..................................................... 41

OPERATION Exercising Instructions ..................................................... 44

MAINTENANCE One-Year Maintenance Log ....................................... 50

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 51

8. APPENDIXES ................................................................................... 52

APPENDIXES Exploded Diagram ........................................................ 52

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the DF-202

Abductor / Adductor machine. Constructed of high quality materials and designed for

years of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

3

2. SAFETY PRECAUTIONS

• Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes

• Keep away from moving parts. Moving parts may or may not stop immediately if

an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is not work-

• Do not use accessories or parts that are not specifically recommended by the

• Children 12 or younger should be supervised to ensure that they do not play on

or near the product.

• The user weight limit for this product is 227 kg, 500 lb.

• Maintenance and repair must be performed by trained service personnel

only. Improper maintenance would not only damage the machine, but

also may present a danger to the exerciser.

• Warning that any of the adjustment devices that could interfere with the user’s

*NOTE: Each machine provides a different resistance ratio of weight stack.

4

3. LIST OF PARTS

5

6

Box A - Main Frame Components

No. Name Qty. No. Name Qty.

A1 Weight stack top right cover 1 A10 Bracket 4

A2 Weight stack top left cover 1 A11 Rear cover 1

A9 Bracket 2

Box B - User Frame Components

No. Name Qty. No. Name Qty.

A21 Seat back 1 A26 Connector 1

A22

Leg cushion pivot

assembly

A23 Seat frame 1 A28 Ø50 Connecting board 1

A24 Seat bottom 1 A29 Floating pulley 1

A25 Connector 1

Round head inner hex screw 2 M6*P1.0*20

Bushing 2 D21.5*10.5

7

Hex head screw M10*P1.5*L30

Hex head screw M10*P1.5*L130

Spring washer M10

Washer D16*d10.2*t1.0

Nylon hex lock nut M10

Hex head screw M8*P1.25*L65

Washer D17*d8.3*t2

Nylon hex lock nut M8

Round head inner hex screw M8*P1.25*L18

Spring washer M8*t2.0

Washer D17*d8*t1.5

8

Components on the Product

9

16

17

STEP 3 Apply the Weight Stack Sticker

Note: Before applying weight plate stickers, please wipe the area clean, and

clean your hands before proceeding to the next step.

(a) Align and tape the cardboard to the upper left corner of the weight plate

(A40).

(b) Peel off the top half of the weight plate sticker (A41) backing. Leave the

clear outside margin in place on the sticker. Don’t peel off the margin.

(c) Press the numbered part of the weight plate sticker (A41) in place while

you peel off the clear margin of the sticker.

(d) Peel off the clear margin of the sticker.

18

STEP 4 Cable Installation

19

STEP 4 Cable Installation (Continued)

(a) Remove screws (51) (53) to remove rotator cover (50), left pulley cover

(52) and right pulley cover (54) as shown.

(b) Remove screws (56) to remove five pulley covers (55), pulley (57) and

20

(c) Cut off the zip tie to uncurl the cable in area C and insert the cable as

indicated by the arrows, first feeding the cable through the pulley in area

cable nut into the U bracket in area G and then secure them with pin (19),

washer (21) and cotter pin (20) in sequence as shown. And then loosely

secure the pulley covers (55) in area E and F with screws. (Note: DO

NOT tighten screws yet.)

Note: Make sure the pulley cover is secured properly as Fig. B shown.

Note: There are two pulleys in area D, install one back into place only in

this step.