SportsArt E845S Le manuel du propriétaire

E845S OWNER’S MANUAL CONTENTS

1. INTRODUCTION .............................................................................. 2

2. SAFETY PRECAUTIONS ................................................................ 3

3. LIST OF PARTS ............................................................................... 7

4. ASSEMBLE THE PRODUCT .......................................................... 9

STEP 1 Install the Frame .................................................................... 9

STEP 2 Install the Glide Rail ............................................................... 14

STEP 3 Install the Pedestal Covers .................................................... 15

STEP 4 Install the Foot Pedals .......................................................... 16

STEP 5 Move the Product into Place .................................................. 18

STEP 6 Level the Product ................................................................... 19

STEP 7 Ground Wire Installation ......................................................... 20

STEP 8 Beware of Moving Parts ......................................................... 21

5. UNDERSTAND THE E845S DISPLAY ............................................ 22

DISPLAY Overview .............................................................................. 22

DISPLAY Specications ....................................................................... 23

DISPLAY Windows ............................................................................... 23

DISPLAY Keys ...................................................................................... 23

6. OPERATE THE PRODUCT ............................................................. 25

OPERATION Quick Start ..................................................................... 25

OPERATION Start a Workout Program ............................................... 25

OPERATION Display ........................................................................... 26

OPERATION Cool Down ..................................................................... 26

OPERATION Review Summary .......................................................... 26

OPERATION Workout Programs ......................................................... 27

OPERATION User Preferences and Component Versions................... 29

7. ABOUT HEART RATE DETECTION ................................................ 31

HEART RATE Telemetry ...................................................................... 31

HEART RATE Contact ......................................................................... 31

8. GUIDELINES FOR EXERCISE ....................................................... 32

9. ACCESSORIES ............................................................................... 33

ACCESSORIES Entertainment Cap ...................................................... 34

ACCESSORIES MYE Wireless TV Audio_Channel Receivers ............. 35

10. MAINTENANCE ............................................................................. 37

MAINTENANCE Lubrication Procedure ............................................... 37

MAINTENANCE Cleaning the Glide Rails ............................................ 39

MAINTENANCE Messages .................................................................. 40

MAINTENANCE Schedule ................................................................... 41

MAINTENANCE Task List (Elliptical Trainers) ..................................... 42

MAINTENANCE One-Year Maintenance Log ...................................... 43

MAINTENANCE Electronics Block Diagram ........................................ 44

2

1. INTRODUCTION

Congratulations on your purchase of one of the nest exercise products on the

market today, the SportsArt E845S Elliptical trainer. Constructed of high quality

materials and designed for years of reliable usage, this product was made to

become an integral part of your commercial tness venue.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

L

R

3

2. SAFETY PRECAUTIONS

Your SportsArt elliptical trainer was designed and built for optimum safety. However

certain precautions apply whenever you use your elliptical trainer.

Please read the entire manual before assembly and operation. Also, please note the

following safety precautions:

● Please read the instructions carefully and install the elliptical trainer as instructed.

● Assemble and operate the elliptical trainer on a solid, level surface. DO NOT use

outdoors or near water.

● Never allow children on or near the elliptical trainer.

● Check the elliptical trainer before every use. Make sure all parts are assembled,

and all fasteners are tightened. DO NOT use the elliptical trainer if the unit is

disassembled in any way.

● Keep your hands away from moving parts.

● Wear proper workout clothing; DO NOT wear loose clothing. DO NOT wear

shoes with leather soles or high heels. Tie all long hair back. DO NOT go barefoot

on this product.

● Be careful when mounting and dismounting the unit.

● The elliptical trainer may or may not stop immediately if an object becomes caught

or impedes normal motion.

● Close supervision is necessary when this elliptical trainer is used by, on, or near

children, invalids, or disabled persons.

● Use this elliptical trainer only for its intended use as described in this manual.

● Never operate this elliptical trainer if it has been damaged in any way. If it is not

working properly, or has been dropped or damaged, contact your dealer.

● Keep all air ventilation areas free of blockage.

● Never drop or insert any object into any opening.

● DO NOT operate where aerosol (spray) products are being used or where oxygen

is being administered.

● The general user weight limit for this elliptical trainer is 205kg (450lb). Note that

at resistance level 40 this product meets standards for users of up to 150kg (330lb).

● This elliptical trainer is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of this elliptical trainer by a person responsible for their

safety.

● Children should be supervised to ensure that they do not play with the

elliptical trainer.

4

2. SAFETY PRECAUTIONS (CONTINUED)

Caution

If you feel any pain or abnormal sensation, STOP YOUR WORKOUT and

consult your physician immediately. Work within your recommended exer-

cise level. DO NOT work to exhaustion.

Before beginning any exercise program, you should consult with your doc-

tor. It is recommended that you undergo a complete physical examination.

DO NOT step onto the highest footplate. While holding onto supports for

stability, step onto the lowest footplate.

Note: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particu-

lar installation. If the user desires to correct such interference, it is at the

user’s own expense.

Warning

Heart rate monitoring systems may be inaccurate. Over exercise may

result in serious injury or death. If you feel faint, stop exercise immediately

and consult a medical physician.

5

2. CONSIGNES DE SÉCURITÉ IMPORTANTES

• Votre elliptique SportsArt a été conçu et fabriqué an d’assurer une sé-

curité optimale. Cependant certaines précautions s’appliquent chaque fois

que vous utilisez votre tapis de course.

• Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez

aussi noter les consignes de sécurité suivantes:

• Veuillez lire attentivement les instructions et installer l’elliptique selon

les instructions.

• Assemblez et faites fonctionner l’elliptique sur une surface solide et

plane; NE PAS l’utiliser à l’extérieur ou près de l’eau.

• En aucun cas, ne laissez des enfants à proximité ou sur l’elliptique.

• Vériez l’ elliptique avant chaque utilisation. Assurez-vous que toutes

les pièces sont assemblées et que tous les éléments de xation sont ser-

rés. NE PAS utiliser l’ elliptique si l’appareil est démonté de quelque façon.

• Gardez vos mains loin des pièces mobiles.

• Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de

vêtements amples. NE PORTEZ PAS de chaussures à semelles en cuir

ou à talons hauts. Attachez les cheveux longs. Ne marchez pas pieds nus

sur l’appareil.

• Soyez prudent lors du montage et démontage de l’appareil.

• L’ elliptique peut s’arrêter ou ne s’arrêter pas immédiatement si quelque chose

obstacle le mouvement.

• NE PAS utiliser d’accessoire non spéciquement recommandé par le

fabricant. Car cela pourraient provoquer des blessures ou entraîner une

panne de l’appareil.

• Une surveillance étroite est nécessaire quand l’elliptique est utilisé par

ou à proximité d’enfants, de malades ou de personnes handicapées.

• Utilisez l’ elliptique uniquement pour l’usage prévu dans ce manuel.

• N’utilisez jamais l’ elliptique s’il a été endommagé de quelque façon que

ce soit. S’il ne fonctionne pas correctement, ou s’il est tombé ou endom-

magé, contactez votre vendeur.

• Veillez à ce qu’aucun orice de ventilation ne soit obstrué.

• Ne faites jamais tomber ou n’insérez jamais d’objet dans les orices.

• NE PAS l’utiliser là où des produits aérosols (vaporisés) sont utilisés ou

lorsque de l’oxygène est administré.

• La limite de poids de l’utilisateur pour cet elliptique est de 205 Kgs (450

lbs). Remarquez que la résistance de 40 convient jusqu’à 150kgs (330

lbs).

• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec

l’elliptique.

6

2. CONSIGNES DE SÉCURITÉ (SUITE)

ATTENTION

Si vous ressentez une douleur ou si vous avez une sensation anormale,

ARRÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.

Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à

l’épuisement.

Avant de commencer un programme d’exercice, vous devriez consulter votre

médecin. Il est recommandé de faire un examen physique complet.

NE PAS monter sur l’étape plus haute. En maintenant sur les supports de stabilité,

monter sur l’ étape plus bas.

Remarque: Ce matériel a été testé et déclaré conforme aux normes des appareils

digitaux de, conformément à la partie 15 du Règlement de la FCC. Ces limites sont

conçues pour offrir une protection raisonnable contre les interférences nuisibles dans

une installation résidentielle. Cet appareil génère, utilise, et peut diffuser des signaux

radioélectriques, et, s’il n’est pas installé et utilisé conformément aux instructions,

peut provoquer des interférences nuisibles aux communications radio. Cependant,

il n’y a aucune garantie que des interférences ne se produiront pas dans une instal-

lation particulière.

Si l’utilisateur désire corriger les interférences, ces corrections seront à la charge de

l’utilisateur.

Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces et

au produit. Comme tels, les mots “gauche” et “droit” font respectivement référence

aux côtés gauche et droit de l’exerciseur. De même pour plus de concision, le

mot est utilisé dans certains cas où des rondelles, des vis et autres matériels sont

associés.

ATTENTION!

Les systèmes de surveillance de la fréquence cardiaque peuvent s’avérer imprécis.

Un entraînement excessif risque de nuire sérieusement à la santé ou d’entraîner la

mort. En cas d’étourdissement, arrêtez immédiatement l’entraînement.

7

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Main frame 1 A7 Left roller cover 2

A2 Stationary handlebar 1 A8 Support tube, left 1

A3

Pedestal covers, left

and right

1 A9 Support tube, right 1

A4

Stationary handlebar

cover, left

1 A10 Foot pedals 1

A5

Stationary handlebar

cover, right

1 A11 Hardware kit 1

A6 Right roller cover 2 A12 Glide rail cover 2

8

Components in the Hardware Kit

No. Name Qty. Specication Notes

10

Mushroom top inner hex screw 6 M10*P1.5*L25

Serrated washer 6 D20*d10.2*t2.0

11

Secondary guide roller bolt 2 D9.96*L54

Self-lubricating bushing 4

Secondary guide roller 2 D23*L45

12 Stride adjustment linkage cover 2

13

Hex nut 2 M10*P1.5

Stopper 2 Ø30-30

14 Phillips screw 4 M4*P0.7*L12

15 Mushroom top Phillips screw 9 M4*P0.7*L12

16 Phillips screw 2 M5*P0.8*L12

17 Phillips screw 2 M4*P0.7*L8

L-shaped Allen wrench 1 M4

L-shaped Allen wrench 1 M5

T-shaped Allen wrench 1 M6

Hex Phillips wrench 1 13*15

Double open-end wrench 1 14*15

Components on the Product

No. Name Specication Notes

31 Bevelled head hex screw M10*P1.5*L20

32 Phillips screw M4*P0.7*L8

33 Phillips screw M4*P0.7*L14

34

Inner hex screw 5/16"*L2-1/4" half

Flat washer D20*d8*t2.0

35

Mushroom top inner hex screw M8*P1.25*L25

Handlebar washer D18*d8.5*t2

36

Inner hex screw M6*P1.0*L15

Handlebar washer D20*d7*t2

37

Mushroom top inner hex screw M6*P1.0*L15

Flat washer D13*d6*t1

38 Mushroom top inner hex screw M5*P0.8*L16

3. LIST OF PARTS (CONTINUED)

9

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” is

used where screws, washers, and other hardware may be involved.

STEP 1 Install the Frame

Please follow instructions (a) through (h) to secure the pedestal.

(a) Remove the upper box and all packing material but leave the main frame

(A1) in the lower box for support.

(b) The screw A (10) is loosely attached before assembly. Raise the main

post or pedestal into position. Secure the pedestal hardware in sequence,

first D (31), then A (10), B and C (10) as shown below.

(c) Then, raise the stride support Assembly (1) and pedal carriage (2) of the

main frame (A1). Place the tip of the food pad surface on the ground (3).

Do this step on the other side of the unit as well.

(d) Tip the frame slightly to access glide rail E.

10

STEP 1 Install the Frame (Continued)

(e) A: Once slip the glide rail into (Part A), then place the pedal carriage

lightly on the glide rail support (Part B). Connect the secondary guide

roller (11) on the bottom of the glide rail. (Please note the direction to

insert the screw is from outside to inside)

B: Unsecure the bolts (32) (33) from the left/right roller covers (A6) (A7)

and then put the the left/right roller covers (A6) (A7) place and secure

them (32) (33) as shown below.

a

b

A

B

Warning: Consult the manual and follow all assembly

instructions carefully. Please note that incorrect assembly

may present a danger to the exercise, will damage the

elliptical and void the warranty.

11

STEP 1 Install the Frame (Continued)

(f) Put the stride linkage in place and use the bolt (34) and washer to secure

it onto the stride support assembly and then press the stride adjustment

linkage covers (12) into place as shown below. Complete steps (d), (e),

and (f) on the other side of the unit too.

12

STEP 1 Install the Frame (Continued)

(g) Secure stopper (13) on the front, bottom of both glide rails and then

remove the unit from the lower box.

13

STEP 1 Install the Frame (Continued)

(h) (1) Loosely secure bolts (35) (36) A and B on both support tube (A8)

(A9). At this point, donot tighten these bolts.

(2) With hardware (37) shown in illustration I, secure the stationary

handlebar (A2) at both sides and then tighten bolts (35) (36) at area

A and B.

(3) Secure the stationary handlebar covers (A4) (A5) with screws (14).

When securing the handlebar, make sure direction of screws (14) are

90-degree to the stationar handlebar (A2).

14

STEP 2 Install the Glide Rail

Follow instructions (a) through (c) to install the glide rail.

(a) Move part (A) of the glide rail to the upper left part of the flywheel within

the 90-degree indication. Hook the part B onto the glide rail.

(b) Turn part B clockwise as shown to a nearly horizontal position of the glide

rail covers (A12).

(c) Install part C onto part B. Use screws (15) (16) to fasten these parts

together.

15

STEP 3 Install the Pedestal Covers

Hold the pedestal covers in place. Use the screw driver provided to tighten

the screws (15) into the pedestal covers (A3).

16

STEP 4 Install the Foot Pedals

Follow steps (a) through (b) to secure the support tubes.

(a) There are rubber pads (A) on the foot pedals (A10). Fold the rubber pad

(A) up to access screws. Secure the foot pedals (A10) onto the plate of

main frame (A1) with screws (38) as shown.

(b) Press the rubber pads (A) onto foot pedals (A10) firmly by Inserting the

nibs on the rubber pads (A) through the holes in the foot pedals (A10).

Make sure that the nibs protrude through the foot pedals (A10). (Please

do not pull out the nibes in the middle.)

17

STEP 4 Install the Foot Pedals (Details)

Follow instructions (a) through (c) to install the details of the foot pedals.

(a) Make sure the middle nibs on the foot pedals (A10) in area L are firmly

placed into the middle holes on the foot pedals (A10). Pull the nibs through

the foot pedals (A10) until they fit snugly in place.

(b) Secure the front screws (shown as m1) on the foot pedals (A10). Insert

the front nibs into the holes on the foot pedals (A10) (shown as M). Pull

the front nibs in place securely.

(c) Secure the back screws (shown as n1) on the foot pedals (A10). Insert

the nibs into the holes on the foot pedals (A10) (shown as N). Pull the

nibs securely into place.

18

STEP 5 Move the Product into Place

There are two techniques for moving this product.

(a) One person: Grip the front base of the product and lift upward, then push

the product into location for use. Be careful to avoid pinching fingers

when setting the product down.

(b) Two people: Have one person grip the front base of the product while

the other person grips the support tubes (A8) (A9). With both people lifting

and stabilizing the unit, roll it into place for use. Be careful to avoid

pinching fingers when setting the product down.

(Note. Make sure grip the front base of the product as indicated by the arrows

to move the product into place.)

(b)

(a)

19

STEP 6 Level the Product

For the user’s safety and the proper functioning of the product, this elliptical

trainer must sit level on a flat floor. If necessary, adjust the levelers by following

instructions (a) through (c) below.

(a) Loosen the leveler nut.

(b) Rotate the leveler foot downward so it firmly touches the floor.

(c) To secure this position, secure the leveler nut upward against the product

frame.

(c)(b)(a)

A

B

20

STEP 7 Ground Wire Installation

Note: A ground wire and the following instructions are required by European

safety standards. The ground wire is not required by North American safety

standards.

To avoid electric shock and current leakage, this product has an exterior

ground wire. For your safety, connect this ground wire to the unit and to the

building ground. Installation instructions: Please use screws and washers to

secure one end of the ground wire to the product frame as shown and the

other end to the building electrical ground.

La page charge ...

SportsArt E845S Le manuel du propriétaire

SportsArt E845S Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents