Smooth Fitness CE-3.0 XT Manuel utilisateur

USER’S MANUAL

SMOOTH CE-3.0 XT ELLIPTICAL

USER WEIGHT LIMITATION: 300lbs(136kgs).

SERIAL NUMBER (found on frame):

Ver. 20121016

2

SMOOTH CE 3.0 XT ELLIPTICAL

PREASSEMBLY

For future service or related questions:

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth

Fitness.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Open the boxes:

You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes.

Check the Parts List for a full count of the number of parts included for this product to be assembled properly. If you are missing

any parts or have any assembly questions call your local dealer or contact us directly at 888-800-1167.

Gather your tools:

Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to assemble

the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.

Clear your work area:

Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free from

anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free

area around the unit for unobstructed operation.

Invite a friend:

Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when

assembling this product.

User Weight Limitation:

Please note that there is a weight limitation for this product. If you weigh more than 300lbs. it is not recommended that you use this

product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not intended to support users

whose weight exceeds this limit.

www.smoothfitness.com

3

POWER REQUIREMENTS

Power Requirements:

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC

SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE

PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT

THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and

noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of

treadmill damage, always use a surge protector (not included) with your treadmill.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a

UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an

electrical rating 120VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric

current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding

conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing

below.

GFCI outlets and GFCI / AFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI / AFCI

Circuit Breakers may cause this equipment to function improperly.

4

SMOOTH CE 3.0 XT ELLIPTICAL

POWER REQUIREMENTS

Alimentation :

UN MAUVAIS BRANCHEMENT DU CONNECTEUR DE MISE À LA TERRE DE L’ÉQUIPEMENT POURRAIT PROVOQUER UN

CHOC ÉLECTRIQUE. EN CAS DE DOUTE, CONSULTER UN ÉLECTRICIEN OU UN RÉPARATEUR QUALIFIÉ POUR SAVOIR

SI LE PRODUIT EST CORRECTEMENT MIS À LA TERRE. NE PAS MODIFIER LA FICHE FOURNIE AVEC LE PRODUIT. SI

ELLE N’ENTRE PAS DANS LA PRISE, FAIRE INSTALLER UNE PRISE APPROPRIÉE PAR UN ÉLECTRICIEN

PROFESSIONNEL.

Ce tapis roulant pourrait être gravement endommagé en cas de changement soudain de tension dans votre alimentation électrique.

Les conditions météorologiques ou la mise sous tension ou hors tension d’autres appareils électriques peuvent provoquer des

pointes de tension, des surtensions ou un brouillage. Pour réduire la possibilité que le tapis soit endommagé, toujours utiliser un

limiteur de surtension (non inclus) avec votre tapis roulant.

Il est possible d’acheter des limiteurs de surtension dans la plupart des quincailleries. Le fabricant recommande un limiteur de

surtension UL 1449 à prise unique comme suppresseur de tension transitoire (TVSS) ayant un taux de suppression de tension de

400 V ou moins et une tension électrique de 110 V C.A., 15 A.

Ce tapis roulant doit être mis à la terre pour réduire le risque de choc électrique. La mise à la terre fournit une voie de moindre

résistance au courant électrique en cas de mauvais fonctionnement du tapis roulant. Ce tapis roulant est équipé d’un cordon

électrique avec un conducteur de mise à la terre et une fiche de mise à la terre. Brancher toujours le cordon électrique dans un

limiteur de surtension et brancher le limiteur de surtension dans une prise appropriée, correctement installée et mise à la terre

conformément à tous les codes locaux et ordonnances.

Ce produit doit être utilisé avec un circuit nominal de 110 volts et à une fiche de mise à la terre qui ressemble à celle illustrée ci-

dessous.

Les prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre ne sont PAS recommandés pour ce produit. Les

prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre pourraient provoquer un mauvais fonctionnement de cet

équipement.

www.smoothfitness.com

5

SUPPLIED COMPONENTS

This list identifies the major components you will use to assemble this product.

Base Frame

Upright Tube

Console

Pedal Support Tube (L)

Long Connecting Bar

Pedal (L)

Pedal (R)

Pedal Support Tube (R)

Rear Stabilizer

Front Stabilizer

Fixed Handlebar

Action Handlebar (R)

Action Handlebar (L)

Pedal Support Tube (L)

Pedal Support Tube (R)

Stride Adjustor

Upright Tube Front Cover

Upright Tube Rear Cover

Power pack

Console Base

Action Arm Cover Front

Console Base Cover (L)

Pedal Support Tube Top (L/R)

Pedal Support Tube Bottom (L/R)

6

SMOOTH CE 3.0 XT ELLIPTICAL

SUPPLIED COMPONENTS

This list identifies the major components you will use to assemble this product.

Hardwar box

Hardware Pack List By step

Step 1

#19

Screw M8*1.25*72

2

#65

Washer 5/16*16*1.0

2

#20

Nylock nut M8*1.25

2

#21

Plastic cap 5/16

2

Step 2

#19

Screw M8*1.25*72

2

#65

Washer 5/16*16*1.0

2

#20

Nylock nut M8*1.25

2

#21

Plastic cap 5/16

2

Step 3

#18

Allen head bolt M8*1.25*15

4

Step 4

#18

Allen head bolt M8*1.25*15

6

Step 5

#122

Screw 5/32*5/8

4

#30

Screw M5*0.8*12

2

#12

Nylock nut M10*1.5

2

#17

Washer 10*22*3T

2

#122

Screw 5/32*5/8

8

#18

Allen head bolt M8*1.25*15

4

Action Arm Cover Rear

Console Base Cover (R)

Pedal Tube Cover

Top L/R

Pedal Tube Cover

Bottom L/R

Water Bottle Holder

Console Base Cover

Rear

Upright Post Cover (L)

Upright Post Cover (R)

www.smoothfitness.com

7

SUPPLIED COMPONENTS

This list identifies the major components you will use to assemble this product.

Hardware Pack List By Step cont.

Step 6

#18

Allen head bolt M8*1.25*15

2

#39

Washer 8*25mm

2

#46

Plastic flat round cap

2

#137

Protection cap

2

#138

Large screw

2

Step 7

#12

Nylock nut M10*1.5

4

#5

End cap

4

#14

Pedal tube shaft ∮17*97mm

2

#11

Washer 10*32*2T

4

Step 8

#18

Allen head bolt M8*1.25*15

8

Step 9

*

Alignment Bar

4

*

Allen Key

1

Step 10

#6

Screw M8*1.25*15

2

Step 11

#136

Screw M3.5*12mm

6

#134

Front cover

1

Step 12

E

4

#30

Screw M5*0.8*12

2

Step 13

#18

Allen head bolt M8*1.25*15

4

#65

Washer 5/16*16*1.0

4

#A

Washer M8

4

#122

Screw 5/32*5/8

8

Step 14

#122

Screw 5/32*5/8

4

#128

Screw M4*12

4

#92

Power ADAPTOR

1

MILLIMETERS

8

SMOOTH CE 3.0 XT ELLIPTICAL

COMPLETE PARTS LIST

Item No.

Description

Qty.

Part No.

1

Handlebar end cap

2

CE30XT-1

2

Handlebar grip

2

CE30XT-2

3

T-Bar grip

2

CE30XT-3

4

Hand pulse grip unit

2

CE30XT-4

5

End cap

4

CE30XT-5

6

Screw M8*1.25*15

2

CE30XT-6

7

Locking washer

2

CE30XT-7

8

Washer ∮25.4

2

CE30XT-8

9

Sleeve O.D. 25.4MM

4

CE30XT-9

10

Sleeve

8

CE30XT-10

11

Washer 10*32*2T

6

CE30XT-11

12

Nylock nut M10*1.5

9

CE30XT-12

13

Pedal tube shaft ∮17*70mm

2

CE30XT-13

14

Pedal tube shaft ∮17*97mm

2

CE30XT-14

15

Bearing 2203RS

4

CE30XT-15

16

Retainer R40

4

CE30XT-16

17

Washer 10*22*3T

2

CE30XT-17

18

Allen head bolt M8*1.25*15

38

CE30XT-18

19

Screw M8*1.25*72

4

CE30XT-19

20

Nylock nut M8*1.25

10

CE30XT-20

21

Plastic cap 5/16

4

CE30XT-21

22

Large square plastic cap

2

CE30XT-22

23

Rear foot cover

2

CE30XT-23

24

Front foot cover (middle)

2

CE30XT-24

25

Left roller holder

1

CE30XT-25

26

Right roller holder

1

CE30XT-26

27

Wheel

2

CE30XT-27

28

Screw M8*50

2

CE30XT-28

29

Screw M4*16mm

6

CE30XT-29

30

Screw M5*0.8*12

14

CE30XT-30

31

Screw M5*20

29

CE30XT-31

32

Screw M4*8

8

CE30XT-32

33

Bearing 6003

2

CE30XT-33

34

Bearing ∮17mm

4

CE30XT-34

35

Screw M6*15

1

CE30XT-35

36

Locking screw M8*1.25*30

1

CE30XT-36

37

Spacer 17*28*1.0

8

CE30XT-37

38

Screw M8*1.25*65

6

CE30XT-38

39

Washer 8*25mm

20

CE30XT-39

40

Screw M8*1.25*30

1

CE30XT-40

41

Nut M8

3

CE30XT-41

42

Spring 3.5mm*21mm

1

CE30XT-42

43

Console

1

CE30XT-43

44

P.U.Roller

2

CE30XT-44

45

Screw M5*15

4

CE30XT-45

46

Plastic flat round cap

2

CE30XT-46

47

Flywheel 250

1

CE30XT-47

48

Speed Sensor Cable

1

CE30XT-48

www.smoothfitness.com

9

COMPLETE PARTS LIST

Item No.

Description

Qty.

Part No.

94

Washer ∮35*∮12*Ｔ2.0

1

CE30XT-94

95

Washer ∮35*∮6*Ｔ2.0

1

CE30XT-95

96

Bearing 6001

6

CE30XT-96

97A

Toggle switch left

1

CE30XT-97A

97B

Toggle switch right

1

CE30XT-97B

98

Square moving arms (L)

1

CE30XT-98

99

Square moving arms (R)

1

CE30XT-99

100

Long connecting bar

2

CE30XT-100

101

Swinging axle plate

2

CE30XT-101

102

Second step tube left

1

CE30XT-102

103

Second step tube right

1

CE30XT-103

104

Step foot cover-Top

2

CE30XT-104

105

Step foot cover-Bottom

2

CE30XT-105

106

Pedal tube cover top (L)

1

CE30XT-106

107

Pedal tube cover bottom ( L )

1

CE30XT-107

108

Pedal tube cover top ( R )

1

CE30XT-108

109

Pedal tube cover bottom ( R )

1

CE30XT-109

110

Roller cover

2

CE30XT-110

111

Screw M5*8

3

CE30XT-111

112

Bearing 6002

4

CE30XT-112

113

Alum rail

2

CE30XT-113

114

Screw M10*1.5*80

1

CE30XT-114

115

AD - Base

1

CE30XT-115

116

Adjustor

1

CE30XT-116

117

AD - Knob M16*1.5

1

CE30XT-117

118

Adjustor cover

1

CE30XT-118

119

AD - Bar

1

CE30XT-119

120

AD - Board

1

CE30XT-120

121

Screw M5*5

4

CE30XT-121

122

Screw 5/32*5/8

24

CE30XT-122

123

Arm cover front

2

CE30XT-123

124

Arm cover rear

2

CE30XT-124

125

Rear cover for upright tube

1

CE30XT-125

126

Front cover for upright tube

1

CE30XT-126

127

Bottle holder

1

CE30XT-127

128

Screw M4*12

4

CE30XT-128

129

380 Pulley rim

2

CE30XT-129

130A

Left upright post cover

1

CE30XT-130A

130B

Right upright post cover

1

CE30XT-130B

131

Console bare

1

CE30XT-131

132A

Left console cover

1

CE30XT-132A

132B

Right console cover

1

CE30XT-132B

133

Front console cover

1

CE30XT-133

134

Front cover

1

CE30XT-134

135

Screw M4*16mm

1

CE30XT-135

10

SMOOTH CE 3.0 XT ELLIPTICAL

COMPLETE PARTS LIST

Item No.

Description

Qty.

Part No.

136

Screw M3.5*12mm

1

CE30XT-136

137

Protection cap

4

CE30XT-137

138

Large screw

6

CE30XT-138

139

Fan network

1

CE30XT-139

140

FAN

1

CE30XT-140

141

Cable for Fan

1

CE30XT-141

142

Fan control board

1

CE30XT-142

#A

Washer M8

4

CE30XT-#A

www.smoothfitness.com

11

ASSEMBLY

STEP 1: Attach the Front Support (Front Stabilizer)

NOTE: To make attaching the support easier place a large Styrofoam

block under the machine.

(A) Attach the front support to the base frame with the wheels facing

outward.

(B) Align the 2 bolt holes in the front support with the bolt holes in the main

frame.

(C) Secure the front support to the main frame by using 2 x #19 bolts

inserted through the bottom, 2 x # 65 washers 2 x 20 lock nuts and 2 x

#21 nut covers

(D) Tighten all bolts now.

#19

2

#65

2

#20

2

#21

2

12

SMOOTH CE 3.0 XT ELLIPTICAL

ASSEMBLY

STEP 2: Attach the Rear Support (Rear Stabilizer)

NOTE: To make attaching the support easier place a large Styrofoam

block under the machine.

(A) Attach the rear support to the base frame

(B) Align the 2 bolt holes in the rear support with the bolt holes in the main

frame.

(C) Secure the rear support to the main frame by using 2 x #19 bolts inserted

through the bottom, 2 x # 65 washers 2 x 20 lock nuts and 2 x #21 nut

covers

(D) Tighten all bolts now.

#19

2

#65

2

#20

2

#21

2

www.smoothfitness.com

13

ASSEMBLY

STEP 3: Attach the Stride Adjuster to the Upright Tube

! Caution Pinch Point: Do not pinch the wires between the frame!

(A) Lay the upright tube on the floor as shown below

(B) Locate and connect the stride adjuster signal wires. (The wire may be

inside the upright tube.

(C) Align the bolt holes in the stride adjuster and the upright.

(D) Secure the Stride adjuster to the upright by using 4 x #18 Allen head bolt.

(E) Hand tighten only do not tighten until step 9

#18

4

14

SMOOTH CE 3.0 XT ELLIPTICAL

ASSEMBLY

STEP 4: Attach the Upright Tube Assembly to the Base Frame

NOTE: This step is easier to complete with 2 people

! Caution Pinch Point: Do not pinch the wires between the frame!

(A) Hold the upright tube over the round base frame tube so that the data

cable can be connected prior to assembly

(B) After the data cable is connected slide the upright tube onto the round

base frame tube.

(C) Check to make sure the upright tube is facing the correct direction. (See

Fig. 4A)

(D) Secure the upright tube to the base frame by using 6 x #18 Allen head

bolts.

(E) Hand tighten all the bolts first Do not fully tighten these bolts until step 9.

#18

6

Facing towards the

back of the machine

Fig 4A

www.smoothfitness.com

15

ASSEMBLY

STEP 5: Attach the Pedal Tube Assembly

(A) Locate the left and right pedal tube assemblies (#74 and #75)

(B) Attach the front pedal covers top and bottom #104/#105 to the right pedal

by using 2x #122 screws and 1 x #30 screw. (See Fig.5A)

(C) Repeat the process for the left side pedal tube

(D) Attach the right pedal tube to the base frame crank arm (See Fig.5B)

(E) Secure the pedal tube to the base frame crank arm by using 1 x #17

washer and 1 x #12 M10 lock nut. Completely tighten with a wrench

(F) Repeat the process for the left side pedal tube

(G) Attach and secure the Rear pedal tube covers #108 and #109 to the right

pedal tube by using 4 x #122 screws.

(H) Repeat this process for the left side Using Rear pedal tube covers

#106/107 Tighten all fasteners now

(I) Insert the front right of the pedal tube #86 on to Action handle bar tube

#70 and secure them together by using 2 x #18 Allen head bolts (See Fig.

5C) Do not fully tighten these bolts. These should be tightened in step 9

(J) Repeat the process for the right side. Do not fully tighten these bolts.

These should be tightened in step

#122

12

#30

2

#12

2

#17

2

#18

4

Fig. 5A

Fig. 5C

Fig. 5B

16

SMOOTH CE 3.0 XT ELLIPTICAL

ASSEMBLY

STEP 6:Attach the Long Connecting Bars

(A) Place the two long connecting bars on to the swinging axel plate #101

and the opposite end on the stride adjuster. Be certain that the Long

connection bar is facing the correct direction (See Fig. 6A)

(B) Secure both long connecting bars to the swinging axel plates #101by

using 2x #18 Allen head bolts, 2x #39 M8 Washer.

(C) Completely tighten the #18 bolts and insert the plastic cap

(D) Secure the long connecting bars to the stride adjuster by using 2 x #138

large bolts. (See Fig. 6B)

(E) Completely tighten the large bolts and cover with 2 x #137 protective cap

#18

2

#39

2

#46

2

#137

2

#138

2

Front

Back

Fig. 6A

Fig. 6B

www.smoothfitness.com

17

ASSEMBLY

STEP 7:Attach the Second Pedal Support Tube Assembly

(A) Place the left second pedal support tube assembly on top of the pedal

support tube and align the rubber roller on the center of the #113

aluminum rail.

(B) Insert the “U” bracket over the preassembled #98 short square swing arm

(C) Insert the #14 small axel through the #102 “U” bracket and #98 short

square swing arm

(D) Secure the #14 small axel by using 2 x #11 washers and 2 x #12 lock

nuts.

(E) Completely tighten the large bolts and cover with 2 x #5 protective caps

(F) Repeat the process above for the right side.

NOTE: Due to the tight tolerance of part #102 and #98 it may be

easier to install put part #11 washer and #12 nut on one side of

the # 14 small axel and twist the axel through the part #102 and

#98.

#12

4

#5

4

#14

2

#11

4

18

SMOOTH CE 3.0 XT ELLIPTICAL

ASSEMBLY

STEP 8:Attach the Foot Pedals

(A) Locate and attach the right pedal to the second pedal support tube “foot

plate”.

(B) Secure the foot pedal to the foot plate by using 4x #18 Allen head bolts.

(C) Repeat the process for the left side.

#18

8

www.smoothfitness.com

19

ASSEMBLY

STEP 9:Roller Alignment

(A) Take the 4 alignment bars and place them on the aluminum rail on either

side of the rubber roller, with the orange marker facing towards the rear of

the machine (see Fig.9A) there should be 2 alignment rods on the left

side and 2 alignment rods on the right side.

(B) Both the left and right rollers should be in the center of the rods. If the

rollers are off center adjust the upright tube by slightly twisting it to the left

or right to align the rollers. (Fig. 9B)

(C) When the rollers are centered, tighten the bolts that were left loose in

steps 3, 4, and 5. (Fig. 9D)

(D) Recheck that all bolts are tight and rollers are centered

(E) Store the alignment rods for later use.

*

4

*

1

Fig .9A

Fig .9B

Fig .9D

Fig .9C

20

SMOOTH CE 3.0 XT ELLIPTICAL

ASSEMBLY

STEP 10:Attach the Console Base and Handlebars

(A) Place the console base #131 on top of the upright tube #68 and align the bolt

holes (See Fig. 10A)

(B) Secure the console base to the upright tube by using 3 x #18 Allen bolts.

Completely tighten the bolts now

(C) Attach the console base covers #132A and 132B around the console base and

secure the covers together by using 4 x #122 screws and 4 x #30 screws.

(See Fig.10B) Do not completely tighten these screws until step 11

(D) Feed the heart rate wire and toggle switch wires for the hand grips through the

small hole below the handlebar bracket then up through the top of the upright

tube. Lay the wires over the top of console base covers

(E) Attach and secure the handle bars to the handle bar bracket on the upright tube

by using 2 x #6 Allen head bolts. Completely tighten the bolts (See Fig 10C)

(F) Set both Left/Right upright post cover (#130A/#130B) to upright tube #68

tighten up both covers with four ( 4) screws (#135)

#18

6

#122

4

#30

2

#6

2

#135

4

Fig. 10A

Fig. 10B

Fig. 10C

NOTE: Parts 97A and 97B are

preassembled from the factory

Fig. 10D

La page est en cours de chargement...

Smooth Fitness CE-3.0 XT Manuel utilisateur

Smooth Fitness CE-3.0 XT Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents