Smooth Fitness 5.65S Manuel utilisateur

USER’S MANUAL

5.65S MOTORIZED TREADMILL

USER WEIGHT LIMITATION: 300lbs(135kgs).

SERIAL NUMBER (found on frame):

2 5.65S TREADMILL

PRECAUTIONS

For future service or related questions:

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Precautions:

WARNING:

To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions

and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are

adequately informed of all warnings and precautions.

 Use the treadmill only as described in this manual.

 Place on a level surface, with 6 feet (2 mX1m space) of clearance behind it. Do not place the treadmill on any surface that

blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

 When choosing a location for the treadmill be sure that the location and position permit access to a plug.

 Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near

water.

 Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

 Keep children under the age of 12 and pets away from the treadmill at all times.

 The treadmill should not be used by persons weighing more than 300LBS (135 Kgs).

 Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.

Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both

men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in

sandals.

 When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same

circuit.

 Always straddle the belt and allow it to start moving before stepping onto the belt.

 Always examine your treadmill before using to ensure all parts are in working order.

 Allow the belt to fully stop before dismounting.

 Never insert any object or body parts into any opening.

 Follow the safety information in regards to plugging in your treadmill.

 Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not

operate the treadmill with a damaged or frayed power cord.

 Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an

authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these

instructions will void the treadmill warranty.

 Never leave the treadmill unattended while it is running.

 Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.

 Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from

children.

www.smoothfitness.com

3

PRECAUTIONS

Pour réparations futures ou questions connexes :

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Précautions:

AVERTISSEMENT : Pour réduire les risques de brûlures, d’incendie, de choc électrique ou de blessures aux personnes, lire les

précautions importantes et l’information suivantes avant de se servir du tapis roulant. Il revient au propriétaire de s’assurer que tous

les utilisateurs de ce tapis ont bien été informés de tous les avertissements et précautions.

 Utiliser le tapis seulement comme il est décrit dans ce manuel.

 Le placer sur une surface plane, en laissant 2 m (6 pi) d’espace libre en arrière. Ne pas placer le tapis roulant sur une

surface qui bloque les ouvertures d’air.

 Pour protéger le plancher ou un tapis de dommages, placer un petit tapis sous le tapis roulant.

 Choisir pour le tapis roulant un emplacement et une position qui permettent d’avoir accès à une prise murale.

 Garder le tapis roulant à l’intérieur, à un endroit sans humidité ni poussière. Ne pas mettre le tapis roulant dans un garage,

sur une terrasse couverte ou près de l’eau.

 Ne pas faire fonctionner le tapis roulant pendant la vaporisation de produits aérosol ou l’administration d’oxygène.

 Ne pas laisser les enfants de moins de 12 ans et les animaux s’approcher du tapis roulant.

 Le tapis roulant ne doit pas être utilisé par des personnes pesant plus de 300 lbs (135 kg).

 Il ne doit jamais y avoir plus d’une personne sur le tapis à la fois. Porter des vêtements d’exercice appropriés pour utiliser

le tapis roulant. Ne pas porter de vêtements lâches qui pourraient être pris dans le tapis roulant. Les vêtements de soutien

athlétiques sont recommandés tant pour les hommes que pour les femmes. Porter toujours des chaussures d’athlétisme.

Ne pas être pieds nus, ou porter seulement des chaussettes ou des sandales lors de l’utilisation du tapis roulant.

 Brancher le cordon d’alimentation dans un circuit avec mise à la terre. Aucun autre appareil ne doit être sur le même

circuit.

 Toujours enjamber le tapis et le laisser commencer à rouler avant de monter dessus.

 Toujours examiner votre tapis roulant avant de l’utiliser pour s’assurer que toutes les pièces fonctionnent correctement

.

 Laisser le tapis s’arrêter complètement avant de descendre.

 Ne jamais insérer d’objets ou de parties du corps dans une ouverture.

 Suivre les directives de sécurité en ce qui concerne le branchement de votre tapis roulant.

 Garder le cordon d’alimentation éloigné des roues inclinées et ne pas faire passer le cordon d’alimentation sous votre

tapis roulant. Ne pas faire fonctionner le tapis roulant si le cordon d’alimentation est endommagé ou effiloché.

 Débrancher toujours le tapis roulant avant de le nettoyer ou de le réparer.

 Toute réparation au tapis doit être effectuée par un réparateur agréé, à moins d’autorisation ou de directives contraires du

fabricant. Le non-respect de ces instructions annulera la garantie du tapis roulant.

 Ne jamais laisser le tapis roulant sans surveillance lorsque la clé de sécurité est insérée.

 Utiliser la « clé de sécurité » pour faire fonctionner le tapis roulant et s’assurer qu’elle est accrochée aux vêtements des

utilisateurs

 Retirer la « clé de sécurité » et la ranger dans un endroit sûr lorsque le tapis roulant n’est pas en fonction. Garder la « clé

de sécurité » hors de la portée des enfants

4 5.65S TREADMILL

POWER REQUIREMENTS

Power Requirements:

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC

SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE

PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT

THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and

noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of

treadmill damage, always use a surge protector (not included) with your treadmill.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a

UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an

electrical rating 120VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric

current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding

conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing

below.

GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers

may cause this equipment to function improperly.

www.smoothfitness.com

5

POWER REQUIREMENTS

Alimentation :

UN MAUVAIS BRANCHEMENT DU CONNECTEUR DE MISE À LA TERRE DE L’ÉQUIPEMENT POURRAIT PROVOQUER UN

CHOC ÉLECTRIQUE. EN CAS DE DOUTE, CONSULTER UN ÉLECTRICIEN OU UN RÉPARATEUR QUALIFIÉ POUR SAVOIR

SI LE PRODUIT EST CORRECTEMENT MIS À LA TERRE. NE PAS MODIFIER LA FICHE FOURNIE AVEC LE PRODUIT. SI

ELLE N’ENTRE PAS DANS LA PRISE, FAIRE INSTALLER UNE PRISE APPROPRIÉE PAR UN ÉLECTRICIEN

PROFESSIONNEL.

Ce tapis roulant pourrait être gravement endommagé en cas de changement soudain de tension dans votre alimentation électrique.

Les conditions météorologiques ou la mise sous tension ou hors tension d’autres appareils électriques peuvent provoquer des

pointes de tension, des surtensions ou un brouillage. Pour réduire la possibilité que le tapis soit endommagé, toujours utiliser un

limiteur de surtension (non inclus) avec votre tapis roulant.

Il est possible d’acheter des limiteurs de surtension dans la plupart des quincailleries. Le fabricant recommande un limiteur de

surtension UL 1449 à prise unique comme suppresseur de tension transitoire (TVSS) ayant un taux de suppression de tension de

400 V ou moins et une tension électrique de 110 V C.A., 15 A.

Ce tapis roulant doit être mis à la terre pour réduire le risque de choc électrique. La mise à la terre fournit une voie de moindre

résistance au courant électrique en cas de mauvais fonctionnement du tapis roulant. Ce tapis roulant est équipé d’un cordon

électrique avec un conducteur de mise à la terre et une fiche de mise à la terre. Brancher toujours le cordon électrique dans un

limiteur de surtension et brancher le limiteur de surtension dans une prise appropriée, correctement installée et mise à la terre

conformément à tous les codes locaux et ordonnances.

Ce produit doit être utilisé avec un circuit nominal de 110 volts et à une fiche de mise à la terre qui ressemble à celle illustrée ci-

dessous.

Les prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre ne sont PAS recommandés pour ce produit. Les

prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre pourraient provoquer un mauvais fonctionnement de cet

équipement.

6 5.65S TREADMILL

BEFORE YOU BEGIN

Open the boxes:

Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists

on page 7 for a full count of the parts included. If you are missing any parts or have any questions contact us

directly at 888-800-1167

Gather your tools:

Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit

properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.

Clear your work area:

Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is

free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a

comfortable amount of free area around the unit for unobstructed operation.

Invite a friend:

Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another

person when assembling this product.

User Weight Limitation:

Please note that there is a weight limitation for this product. If you weigh more than 300LBS (Approx. 135 Kgs). It is

not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown

here. This product is not intended to support users whose weight exceeds this limit.

Care and maintenance:

The safety level can be maintained only if it is examined for damage and wear.

Replace any defective components immediately and stop all use of the equipment until repaired.

Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.

Dismount from the equipment only after all parts have stopped.

Always check the wear and tear components like pulley, belts, etc.…To prevent injury.

There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately

by actuating the emergency stop for emergency dismount.

www.smoothfitness.com

7

SUPPLIED COMPONENTS / SUPPLIED HARDWARE

This list identifies the major components you will use to assemble this product.

No. Description Qty.

A1

Treadmill Base

1

A2 Console Assembly 1

565-302 Left Upright 1

565-301 Right Upright 1

565-306 Left Protective Cover 1

565-307 Right Protective Cover 1

Hardware Kit

565-303 M8x15mm Bolt 12

565-305 M8 Washer 6

565-304 M8 Curve Washer 6

565-308 M4x15mm Bolt 2

565-309 M4x12mm Bolt 2

A 5mm Allen Key 1

B 6mm Allen Key 1

565-209 Safety Key 1

C Silicone Lubricant 1

565-204 Bottle Holder 1

565-205 M5x15mm Bolt 2

Millimeters

A

1 302 301

A

2

306 307

305

308304 303

B

229

A

309

C

204

205

8 5.65S TREADMILL

COMPLETE PARTS LIST

Part No. Description Qty.

5.65S-1

565S-101

Running Deck Frame 1

565S-102

Front Roller 1

565S-103

Rubber Cushion 6

565S-104

Running Deck 1

565S-105

Running Delt 1

565S-106

Rear Roller 1

565S-107

Motor Control Board 1

565S-108

Upper Motor Cover 1

565S-109

Inductance

1

565S-110

Wave

Filter 1

565S-111

Front Mobile Wheel 2

565S-112

Brass

Pillar 4

565S-113

Base Frame 1

565S-114

Speed Sensor 1

565S-115

On-off Switch 1

565S-116

M8*30mm Bolt 2

565S-117

Power Breaker 1

565S-118

End

Cap-2 2

565S-119

Running Deck Frame End Cap 2

565S-120

M8 Spring Washer 2

565S-121

Drive Belt 1

565S-122

Left Roller Cover 1

565S-123

Right Roller Cover 1

565S-124

Side Rein 2

565S-125

Stud-1 2

565S-126

Washer, Stud 2

565S-127

M8*15mm Bolt 2

565S-128

M3*6mm

Bolt 4

565S-129

Lower Locking Tube 1

565S-130

Upper Locking Tube 1

565S-131

Lower Motor Cover 1

565S-132

Rear Wheel 2

565S-133

M4*6mm

Bolt 2

565S-134

Incline Motor 1

565S-135

DC Motor 1

565S-136

Lift Arm 1

565S-137

Adjustment Pad 2

565S-138

M8*15mm Bolt 4

565S-139

M3*6mm Bolt 2

565S-140

M8*40mm Bolt 2

www.smoothfitness.com

9

COMPLETE PARTS LIST

Part No. Description Qty.

565S-141

M8*40mm 3

565S-142

M8 Nut 2

565S-143

M10*45mm Bolt 1

565S-144

M10 Nut 1

565S-145

M8 Spring Washer 5

565S-146

M8*15mm Bolt 2

565S-147

Ring

Core 2

565S-148

M8*140mm Bolt 1

565S-149

M8 Nut 2

565S-150

5/16"*135mm Bolt 1

565S-151

Lower Console Wire 1

565S-152

M8 Spring washer 1

565S-153

M4*10mm

-1 Bolt 8

565S-154

M4*10mm-2 Bolt 4

565S-155

Power Cord 1

565S-156

Washer, Stud 2

565S-157

M8*30mm Bolt 1

565S-58

M8*70mm Bolt 3

565S-159

M6*15mm Washer 8

565S-160

Bolt M8*25mm

8

565S-161

Wire Clip 4

565S-162

M5*12mm Bolt 4

565S-163

Air Shock 1

565S-164

M8*15mm Bolt 2

565S-165

M8*55mm Bolt 1

565S-166

M8*60mm Bolt 1

565S-167

M4*15mm Bolt 2

565S-168

Fixing Bracket, Motor 1

565S-169

Electric

Wire Cover 1

565S-170

Stud-2 2

565S-171

Horizontal Adjustment 2

565S-172

Spacer 2

565S-173

Bushing 4

565S-174

M4*10mm Bolt 7

565S-175

Rubber Cushion -2 2

565S-176

Rubber Cushion -3 2

10 5.65S TREADMILL

COMPLETE PARTS LIST

Part No. Description Qty.

565S-2

565S-201 Console Frame 1

565S-202 Console Housing 1

565S-203 M4x12mm Bolt 14

565S-204 Bottle Holder 1

565S-205 M5x15mm Bolt 2

565S-206 M4x15mm Bolt 5

565S-207 Handle Pulse Sensor 2

565S-208 M4x25mm Bolt 2

565S-209 Stud 2

565S-210 Ring Core 1

565S-211 Console Insert 1

565S-212 Fixing Bracket, left speaker 1

565S-213 Fixing Bracket, right speaker 1

565S-214 Panel, console 1

565S-215 M3x6mm Bolt 5

565S-216 Hand Pulse PCB 1

565S-217 Sensor 1

565S-218 Fan 1

565S-219 Speaker 2

565S-220 M3x30mm Bolt 4

565S-221 Handle Grip Foam 2

565S-222 Receiver 1

565S-223 Handle Button 2

565S-224 M4x12mm Bolt 4

565S-225 Handle Button Sticker 2

565S-226 Net of speaker (left) 2

565S-227 Net of speaker (right) 1

565S-228 Soft Touch Keypad 1

565S-229 Safety Key 1

565S-230 Console Wire 1

565S-231 Handle Button Wire 2

565S-232 Receiver Wire 1

565S-233 Hand Pulse Wire 2

565S-234 Data Updated Wire 1

565S-235 Audio Jack 1

www.smoothfitness.com

11

COMPLETE PARTS LIST

Part No. Description Qty.

565S-3

565S-301 Right Upright 1

565S-302 Left Upright 1

565S-303 M8x15mm Bolt 12

565S-304 M8 Curve Washer 6

565S-305 M8 Washer 6

565S-306 Left Protective Cover 1

565S-307 Right Protective Cover 1

565S-308 M4x15mm Bolt 2

565S-309 M4x12mm Bolt 2

12 5.65S TREADMILL

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED

www.smoothfitness.com

13

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

14 5.65S TREADMILL

PARTS DIAGRAM

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

www.smoothfitness.com

15

ASSEMBLY

–

PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.

STEP1: Assemble Console Mast to Base Frame.

NOTE: Make sure all wires are recessed into the frame. DO NOT trap or

pinch. DO NOT tighten any bolts until STEP2.

When attaching the Right

upright (310) first attach the Lower Console Wire to the

fish wire in the upright. This will allow you to pull the data cable up through the

upright during installation

1). Attach Left and Right Uprights into base frame, and secure using the 6 x

M8x15mm Bolt (303) with 4 x M8 Curve Washer (304), 2 x M8 Washer (305).

303 X6

305 X2

304 X4

Bolts should be hand tight only

Green plastic wrap

Clear plastic wrap

303

305

303

304

151

Caution Wire

Pinch Point

16 5.65S TREADMILL

ASSEMBLY

STEP2: Attach Console to Left and Right Uprights

1). Connect the Upper Console Wire (230) from the console set to Lower Console

Wire (151) in the right upright, Then place the excess wire and the connectors

into right upright.

2). Place the entire console set onto the uprights, and secure the left side using 3

x M8x15mm Bolt (303) with 2 x M8 Washer (305) and 1 x M8 Curve Washer

(304).

3). Repeat the above process for the Right side

4). Fully tighten all bolts from step 1 and step 2

303 X6

305 X4

304 X2

Caution Pinch point! Do not pinch wires between frame.

Tighten all bolts and fasteners now

303

305

303

304

230

151

www.smoothfitness.com

17

ASSEMBLY

STEP3: Fasten protective cover on the upright

1). Attach the Left Protective Cover (306) onto the Left upright and secure using

1 x M4x15mm Bolt (308) and 1 x M4x12mm Bolt (309).

2). Repeat the above process for the Right side.

308 X2

309 X2

306

308

307

309

18 5.65S TREADMILL

ASSEMBLY

STEP4: Assembly the console to the bottle holder

Attach the Bottle holder to the console set, and secure using M5x15mm Bolt (205).

205 X2

204 X1

Tighten all bolts and fasteners now

205

204

www.smoothfitness.com

19

ASSEMBLY

STEP 5:

Insert the Safety Key (229) into Bottom Center of Console prior to operation.

Your treadmill will not Function with out the safety key.

229 X1

20 5.65S TREADMILL

ASSEMBLY

How to fold and unfold the treadmill:

Your treadmill can be folded up and unfold for space saving storage. To do this follow the instructions here:

Fold Up

1. To fold the deck you first need to bring the treadmill

to the lowest incline level and then remove the

power cord

2. Lift the deck up from the rear of the treadmill and

fold up until it locks in place. TO PREVENT INJURY

BE SURE YOU HAVE A FIRM HOLD WHEN

RAISING THE DECK.

3. You will hear a “click” sound as the lock engages.

Unfold

To unfold the treadmill from the upright position:

1. Begin by standing behind the unit and support the

deck with your hands. Next release the lock with

your foot by pressing the release lever with your

foot. TO PREVENT INJURY BE SURE YOU HAVE

A FIRM HOLD ON THE DECK BEFORE

RELEASING THE LOCK.

2. Slowly lower the deck until the deck start to lower by

itself. The deck will lower slowly until it rests firmly

on the ground. PLEASE DO NOT STAND BEHIND

THE TREADMILL AND BE CERTAIN THE AREA

BEHIND IS CLEAR WHEN THE DECK IS

LOWERING

Horizontal Adjustment

An uneven floor or improper stabilizer level can cause

the treadmill to wobble during use as well as the incline

adjustment to function incorrectly. Please follow the

procedure described below to make sure the treadmill

stabilizer is adjusted correctly prior to use. You may

need the assistance of another person to perform this

adjustment.

First locate the two adjustable stabilizers under the

base frame. Then simply rotate them in or out to

adjust the level of the treadmill. When properly

adjusted the treadmill should sit firmly on both

stabilizers and all cushions.

La page est en cours de chargement...

Smooth Fitness 5.65S Manuel utilisateur

Smooth Fitness 5.65S Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents