Smooth Fitness smt-935bt Manuel utilisateur

USER’S MANUAL

9.35BT MOTORIZED TREADMILL

USER WEIGHT LIMITATION: 400lbs(180kgs).

SERIAL NUMBER (found on frame):

REV140129

9.35 TREADMILL

PRECAUTIONS

For future service or related questions:

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Precautions:

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions

and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are

adequately informed of all warnings and precautions.

 Use the treadmill only as described in this manual.

 Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air

openings. To protect the floor or carpet from damage, place a mat under the treadmill.

 When choosing a location for the treadmill be sure that the location and position permit access to a plug.

 Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near

water.

 Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

 Keep children under the age of 12 and pets away from the treadmill at all times.

 The treadmill should not be used by persons weighing more than 400LBS (180 Kgs).

 Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.

Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both

men and women. Always wear athletic shoes. Never use the treadmill with bare feet, socks/stockings , or sandals.

 When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same

circuit.

 Always straddle the belt and allow it to start moving before stepping onto the belt.

 Always examine your treadmill before using to ensure all parts are in working order.

 Allow the belt to fully stop before stepping off of the treadmill.

 Never insert any object or body parts into any opening.

 Follow the safety information in regards to plugging in your treadmill.

 Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not

operate the treadmill with a damaged or frayed power cord.

 Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an

authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these

instructions will void the treadmill warranty.

 Never leave the treadmill unattended while it is running.

 Use the safety key when operating the treadmill and make sure the safety key is clipped to the users clothing.

 Remove the safety key and store it in a safe place when the treadmill is not in use. Keep the safety key away from

children.

 This appliance is not intended for use by children, persons with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they are given supervision or instruction concerning use of the appliance by a person

responsible for their safety .Children should be supervised to ensure that they do not play with the appliance.

 If the supply cord is damaged, it must be replaced by the manufacturer or approved agent, with a Smooth Fitness OEM

part.

www.smoothfitness.com

PRECAUTIONS

Pour réparations futures ou questions connexes :

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Précautions:

AVERTISSEMENT : Pour réduire les risques de brûlures, d’incendie, de choc électrique ou de blessures aux personnes, lire les

précautions importantes et l’information suivantes avant de se servir du tapis roulant. Il revient au propriétaire de s’assurer que tous

les utilisateurs de ce tapis ont bien été informés de tous les avertissements et précautions.

 Utiliser le tapis seulement comme il est décrit dans ce manuel.

 Le placer sur une surface plane, en laissant 2 m (6 pi) d’espace libre en arrière. Ne pas placer le tapis roulant sur une

surface qui bloque les ouvertures d’air.

 Pour protéger le plancher ou un tapis de dommages, placer un petit tapis sous le tapis roulant.

 Choisir pour le tapis roulant un emplacement et une position qui permettent d’avoir accès à une prise murale.

 Garder le tapis roulant à l’intérieur, à un endroit sans humidité ni poussière. Ne pas mettre le tapis roulant dans un garage,

sur une terrasse couverte ou près de l’eau.

 Ne pas faire fonctionner le tapis roulant pendant la vaporisation de produits aérosol ou l’administration d’oxygène.

 Ne pas laisser les enfants de moins de 12 ans et les animaux s’approcher du tapis roulant.

 Le tapis roulant ne doit pas être utilisé par des personnes pesant plus de 400 lbs (180 kg).

 Il ne doit jamais y avoir plus d’une personne sur le tapis à la fois. Porter des vêtements d’exercice appropriés pour utiliser

le tapis roulant. Ne pas porter de vêtements lâches qui pourraient être pris dans le tapis roulant. Les vêtements de soutien

athlétiques sont recommandés tant pour les hommes que pour les femmes. Porter toujours des chaussures d’athlétisme.

Ne pas être pieds nus, ou porter seulement des chaussettes ou des sandales lors de l’utilisation du tapis roulant.

 Brancher le cordon d’alimentation dans un circuit avec mise à la terre. Aucun autre appareil ne doit être sur le même

circuit.

 Toujours enjamber le tapis et le laisser commencer à rouler avant de monter dessus.

 Toujours examiner votre tapis roulant avant de l’utiliser pour s’assurer que toutes les pièces fonctionnent correctement.

 Laisser le tapis s’arrêter complètement avant de descendre.

 Ne jamais insérer d’objets ou de parties du corps dans une ouverture.

 Suivre les directives de sécurité en ce qui concerne le branchement de votre tapis roulant.

 Garder le cordon d’alimentation éloigné des roues inclinées et ne pas faire passer le cordon d’alimentation sous votre

tapis roulant. Ne pas faire fonctionner le tapis roulant si le cordon d’alimentation est endommagé ou effiloché.

 Débrancher toujours le tapis roulant avant de le nettoyer ou de le réparer.

 Toute réparation au tapis doit être effectuée par un réparateur agréé, à moins d’autorisation ou de directives contraires du

fabricant. Le non-respect de ces instructions annulera la garantie du tapis roulant.

 Ne jamais laisser le tapis roulant sans surveillance lorsque la clé de sécurité est insérée.

 Utiliser la « clé de sécurité » pour faire fonctionner le tapis roulant et s’assurer qu’elle est accrochée aux vêtements des

utilisateurs

 Retirer la « clé de sécurité » et la ranger dans un endroit sûr lorsque le tapis roulant n’est pas en fonction. Garder la « clé

de sécurité » hors de la portée des enfants

9.35 TREADMILL

POWER REQUIREMENTS

Power Requirements:

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC

SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE

PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT

THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and

noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of

treadmill damage, always use a surge protector (not included) with your treadmill.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a

UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an

electrical rating 110VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric

current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding

conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing

below.

GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers

may cause this equipment to function improperly.

This product will not function when connected to a power supply with an AFCI circuit breaker.

www.smoothfitness.com

POWER REQUIREMENTS

Alimentation :

UN MAUVAIS BRANCHEMENT DU CONNECTEUR DE MISE À LA TERRE DE L’ÉQUIPEMENT POURRAIT PROVOQUER UN

CHOC ÉLECTRIQUE. EN CAS DE DOUTE, CONSULTER UN ÉLECTRICIEN OU UN RÉPARATEUR QUALIFIÉ POUR SAVOIR

SI LE PRODUIT EST CORRECTEMENT MIS À LA TERRE. NE PAS MODIFIER LA FICHE FOURNIE AVEC LE PRODUIT. SI

ELLE N’ENTRE PAS DANS LA PRISE, FAIRE INSTALLER UNE PRISE APPROPRIÉE PAR UN ÉLECTRICIEN

PROFESSIONNEL.

Ce tapis roulant pourrait être gravement endommagé en cas de changement soudain de tension dans votre alimentation électrique.

Les conditions météorologiques ou la mise sous tension ou hors tension d’autres appareils électriques peuvent provoquer des

pointes de tension, des surtensions ou un brouillage. Pour réduire la possibilité que le tapis soit endommagé, toujours utiliser un

limiteur de surtension (non inclus) avec votre tapis roulant.

Il est possible d’acheter des limiteurs de surtension dans la plupart des quincailleries. Le fabricant recommande un limiteur de

surtension UL 1449 à prise unique comme suppresseur de tension transitoire (TVSS) ayant un taux de suppression de tension de

400 V ou moins et une tension électrique de 110 V C.A., 15 A.

Ce tapis roulant doit être mis à la terre pour réduire le risque de choc électrique. La mise à la terre fournit une voie de moindre

résistance au courant électrique en cas de mauvais fonctionnement du tapis roulant. Ce tapis roulant est équipé d’un cordon

électrique avec un conducteur de mise à la terre et une fiche de mise à la terre. Brancher toujours le cordon électrique dans un

limiteur de surtension et brancher le limiteur de surtension dans une prise appropriée, correctement installée et mise à la terre

conformément à tous les codes locaux et ordonnances.

Ce produit doit être utilisé avec un circuit nominal de 110 volts et à une fiche de mise à la terre qui ressemble à celle illustrée ci-

dessous.

Les prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre ne sont PAS recommandés pour ce produit. Les

prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre pourraient provoquer un mauvais fonctionnement de cet

équipement.

Ce produit ne fonctionne pas lorsqu'il est connecté à une alimentation électrique d'un disjoncteur AFCI.

9.35 TREADMILL

BEFORE YOU BEGIN

Open the boxes:

Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists

on page 7 for a full count of the parts included. If you are missing any parts or have any questions contact us

directly at 888-800-1167

Gather your tools:

Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit

properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.

Clear your work area:

Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is

free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a

comfortable amount of free area around the unit for unobstructed operation.

Invite a friend:

Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another

person when assembling this product.

User Weight Limitation:

Please note that there is a weight limitation for this product. If you weigh more than 400LBS (Approx. 180 Kgs). It is

not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown

here. This product is not intended to support users whose weight exceeds this limit.

Care and maintenance:

The safety level can be maintained only if it is examined for damage and wear.

Replace any defective components immediately and stop all use of the equipment until repaired.

Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.

Dismount from the equipment only after all parts have stopped.

Always check the wear and tear components like pulley, belts, etc.…To prevent injury.

There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately

by actuating the emergency stop for emergency dismount.

www.smoothfitness.com

SUPPLIED COMPONENTS / SUPPLIED HARDWARE

This list identifies the major components you will use to assemble this product.

MAIN FRAME

CONSOLE UPRIGHT

CONSOLE ASSEMBLY

AUDIO WIRE

HARDWARE KIT

M10x20 Hex socket

head bolt 16pcs(66)

Washer M10

16pcs(65)

M8x15 Hex socket head

bolt 4pcs(67)

Washer M8

4pcs(86)

∮4x15 screws

8pcs(85)

Lubricant for the

running deck

Safety key

Allen wrench 1 pcs

Screw driver

Millimeters

Accessory tray

Crossbar

9.35 TREADMILL

COMPLETE PARTS LIST

ITEM

DESCRIPTION

QTY

ITEM

DESCRIPTION

QTY

935BT-1

Main frame

1

935BT-45

Fan

1

935BT-2

Incline frame

1

935BT-46

Fan fixing plate

1

935BT-3

Console frame

1

935BT-47

Speaker

2

935BT-4

Left console mast

1

935BT-48

Speaker hood

2

935BT-5

Right console mast

1

935BT-49

Speed key

1

935BT-6

Drive motor

1

935BT-50

Key panel

2

935BT-7

Motor bracket

1

935BT-51

Right handle cap

1

935BT-8

Spring washer 8

2

935BT-52

Right handle hood

1

935BT-9

Socket bolt M8*15mm

2

935BT-53

Key panel

1

935BT-10

Washer 8

4

935BT-54

Key panel

1

935BT-11

Nut M8

4

935BT-55

Spring socket

2

935BT-12

Drive belt

1

935BT-56

Safety key

1

935BT-13

Front roller

1

935BT-57

MP3 interface

1

935BT-14

Rear roller

1

935BT-58

Key

1set

935BT-15

Side rail

2

935BT-59

Left handle cap

1

935BT-16

Running deck

1

935BT-60

Console back

1

935BT-17

Rubber cushion

8

935BT-61

Incline key

1set

935BT-18

Fixing block

8

935BT-62

Left handle hood

1

935BT-19

End cover

1set

935BT-63

Handle pulse

2set

935BT-20

Running belt

1

935BT-64

Pipe cap

2

935BT-21

Incline motor

1

935BT-65

Washer

16

935BT-22

Moving wheel

2

935BT-66

Hex socket head bolt M10*20mm

16

935BT-23

Bluetooth panel

1

935BT-67

Hex socket head bolt M8*15mm

6

935BT-24

Transformer

1

935BT-68

Socket bolt M8*90mm

2

935BT-25

Transformer

1

935BT-69

Star washer

3

935BT-26

Control PCB

1

935BT-70

Socket head bolt M8*35mm

8

935BT-27

Motor sensor wire

1

935BT-71

Socket bolt M8*65mm

1

935BT-28

Fuse

1

935BT-72

Bolt M10*115mm

1

935BT-29

On/off switch

1

935BT-73

Bolt M10*50mm

1

935BT-30

Power cord clamp

1

935BT-74

Washer 10

4

935BT-31

Motor cover

1

935BT-75

Nut M10

4

935BT-32

Foot support

2

935BT-76

Bolt M10*75mm

2

935BT-33

Connect wire

1set

935BT-77

Sleeve

2

935BT-34

Lower Data Cable

1

935BT-78

Bolt M12*60mm

2

935BT-35

Upper Data Cable

1

935BT-79

Washer 12

2

935BT-36

Console front

1

935BT-80

Nut M12

2

935BT-37

Console

1

935BT-81

Console crossbar

1

935BT-38

Stopper clamp

2

935BT-82

Bottle Holder

1

935BT-39

Stopper block

1

935BT-83

Right rubber ring

1

935BT-40

Console PCB(LCD)

1

935BT-84

Left rubber ring

1

935BT-41

PCE panel*

1

935BT-85

∮4x15 Cross self-tapping screws

8

935BT-42

Heart rate panel

1

935BT-86

M8 Washer

4

935BT-43

USB panel

1

935BT-44

Amplifier panel

1

www.smoothfitness.com

COMPLETE DIAGRAM

Console Assembly

Motor Cover

Running Belt

Handle

Handle Pulse

End Cap

Transportation Wheel

Rear Roller

Console Upright

Accessory tray

9.35 TREADMILL

COMPLETE PARTS DIAGRAM 2

www.smoothfitness.com

ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING ASSEMBLY.

STEP1: Assemble the Left and Right Uprights to Main Frame.

NOTE: Make sure all wires are recessed into the frame. DO NOT trap or

Pinch the Data Cables. DO NOT tighten the bolts until STEP3.

1. When attaching the Right upright (5) first feed the lower console wire through

the upright. The wire should hang over the top of the upright.

2. Slide the right upright on to the base frame.

3. Slide the left upright on to the base frame.

4. Secure both uprights with 8 x M10*20mm Bolts(66) and 8x M10 Washers (65).

5. Hand tighten only

66

X8

65

X8

The bolts should be hand tight only

Pinch point. Do not pinch the wires

between the frame

9.35 TREADMILL

ASSEMBLY

STEP2: Attach the Console to Left and Right Uprights

NOTE: Make sure all wires are recessed into the frame. DO NOT trap or

Pinch the Data Cables. DO NOT tighten the bolts until STEP3.

1. Connect the lower data cables(34) from the right upright to the upper data

cables from the console(35)

2. Push the excess wire down into the upright making sure not to pinch the

wire when the console is attached

3. Slide the console on the left and right uprights.

4. Secure the left and right uprights to the console using 8x M10*20mm

bolts(66) and 8x M10 washers(65).

5. Hand tighten only

66

X8

65

X8

Ensure the connector pins are straight when

connecting the data cable

Caution Pinch point! Do not pinch wires

between the frame.

The bolts should be hand tight only

www.smoothfitness.com

ASSEMBLY

STEP3: Crossbar Assembly.

1) Align the crossbar with the bolt holes on the inside of the

upright post. Make sure the two extrusions on the crossbar

are facing towards the back of the treadmill

2) Secure the crossbar to the uprights using 4x M8*15mm

bolts(67) and 4x M8 washers(86).

3) Tighten all the bolts from this and previous steps

67

X4

86

X4

Console crossbar

Tighten all bolts and fasteners now

9.35 TREADMILL

ASSEMBLY

STEP4: Assembly of the accessory tray to the cross bar

1. Attach the rubber spacers to both sides of the accessory tray

2. Place the accessory tray over the crossbar

3. Secure the tray to the crossbar using 8 x M4*15mm screws (85).

85

X8

Tighten all bolts and fasteners now

www.smoothfitness.com

ASSEMBLY

STEP 5:

1) Turn the power switch on

2) Insert the Safety Key (56) into the Bottom Center of Console, prior to

operation.

Note:Your treadmill will not Function without the safety key.

56

X1

Power Switch

Safety Key

9.35 TREADMILL

COMPUTER OPERATION

• Multiple user profiles are available to store your personal information such as height, weight, gender and age for

individual workouts and results tracking.

• The workout history is recorded allowing you to compare today’s progress to this week’s progress, month to date and

last month’s progress and even the year to date progress. You will be able to view your progress against fitness

milestones.

• You can watch your favorite movies and listen to your favorite music during the workout. The MySmooth heads-up

display allows you to safely watch videos but still have visibility of your statistics and equipment controls, so you will

never lose sight of your goals.

• Includes a complete library of standard workout programs

• To enhance the audio visual experience you can connect your tablet to a big screen TV. The high quality video feed

provides a crisp, clear “as if you were there” experience.

INTRODUCING MYSMOOTH VIRTUAL TABLET-BASED FITNESS CONTROLS, ALLOWING YOU TO IMMERSE THEMSELVES IN

VIRTUAL OUTDOOR WORKOUT EXPERIENCES THROUGH FULL MOTION VIDOES AND INTERACTIVE CAPABILIATES

BENEFITS:

1) The app is FREE. The app is available through the iTunes store and the Android Market. You must purchase the

optional Bluetooth module

2) Exercise with virtual videos that take you to spectacular locals around the world. The videos are not computer-

generated or snap shots of landmarks but actual first person video, shot by people running and hiking.

3) Filmed with Imax®- equivalent technology complete with natural sound effects consumers are able to immerse yourself

in incredible experiences such as running through the Swiss Alps or hiking around Creator Lake.

4) As the terrain changes so does the equipment's inclination or resistance. Pick up the pace or slow down and experience

Smooth Sync which synchronizes the video speed to your speed.

To learn more visit www.smoothfitness.com or call 1-888-800-1167

MySmooth Bluetooth Compatible

This feature is optional and must be purchased separately.

www.smoothfitness.com

Wireless Heart Rate

WIRELESS CHEST BELT MONITOR

Your product includes the pre‐installed receiver with console. The chest belt is included with the equipment. For

sanitary reasons it is recommended not to share the chest belt with any other person. To purchase an additional chest

belt from our website go to www.smoothfitness.com or call 1‐888‐800‐1167.

STORAGE AND MAINTENANCE

Dry the chest belt monitor after each use. The chest

belt monitor is activated when you wet the electrode

areas and put on the chest belt monitor; the chest

belt Monitor shuts off when it is removed and the

electrode areas are dried. If the chest belt monitor is

not dried after each use, the battery may be drained

prematurely

1. Store the chest belt monitor in a warm, dry place.

Do not store the chest belt monitor in a plastic

bag or other container that may trap moisture.

2. Do not excessively bend or stretch the sensor

unit when using or storing the chest belt monitor.

3. Clean the sensor units using a damp cloth- never

use alcohol, aba dives, or chemicals. Hand wash

and air dry the chest belt.

4. If the chest belt monitor does not function

properly, try the suggestions below.

5. Make sure that you are wearing the chest belt

monitor as described at the left. Note: If the chest

belt monitor does not function when positioned as

described, move it slightly lower or higher on your

chest.

6. Use saline solution such as saliva or contact lens

solution to wet the two electrode areas on the

sensor unit. If chest belt readings do not appear

until you begin perspiring, re-wet the electrode

areas.

7. To use the chest belt heart rate, position yourself

near the console. It is recommended that the

user be within arm’s length of the console.

8. The chest belt monitor is designed to work with

people who have normal heart rhythms. Chest

belt reading problems may be caused by medial

conditions such as premature ventricular

contractions (pvcs), tachycardia bursts, and

arrhythmia

9. The operation of the chest belt monitor can be

affected by magnetic interference caused by high

power lines or other sources, if it is suspected

that this is a problem, try relocating the elliptical.

HOW TO WEAR THE WIRELESS CHEST BELT

The monitor has two components: a chest belt and a

sensor unit (see the drawing below). Insert the tab on

one end of the chest best into one end of the sensor

unit, as shown in the insert drawing. Press the end of

the sensor unit under the buckle on the chest belt. The

tab should be flush with the front of the sensor unit.

9.35 TREADMILL

COMPUTER OPERATION

Computer Display

Time

00:00-99:59 Min

Speed

0.5-12.5 mile/h

incline

0-15

Distance

0.00-99.9 mile

Calories

0-999 KCAL

Pulse

70-200 / Min

Goal

0-100%

Age

15-80 years

Weight

88-400 lbs

Level

L1-L10

Mode

P0-P26 C1-C4

Height

4.0-11.0ft

Gender

Male = M ,Female = F

Target HR

50-190

www.smoothfitness.com

COMPUTER OPERATION

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

START:

Press the “START “ button to begin your

workout

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

PAUSE:

Press the “STOP”button to pause the

workout.

RESET:

Press and hold the “STOP”button for a

few seconds to reset the computer to the

power up screen.

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

SELECT:

Press the “Select” button to confirm the

set values (time, distance, calories,

weight, height, program settings and to

scroll between the computer readout

during your workout.)

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

SPEED BUTTONS

Press the “Speed + / -“ buttons to scroll

through the programs, change the

program levels, set the time, set the

distance, set the calories, set the height,

set the weight, set the age and set the

heart rate. The buttons will also increase

and decrease your speed during the

workout.

9.35 TREADMILL

COMPUTER OPERATION

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

INCLINE BUTTONS

Press the /buttons to choose the

incline or workout time according to the

selected function (the selected function

is flashing)

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

QUICK SPEED BUTTONS:

Press the quick speed buttons to achieve

the predetermined speed with the push of

one button.

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

QUICK INCLINE BUTTON:

Press the quick incline buttons to achieve

the predetermined incline with the push of

one button.

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

FAN ON/OFF KEY:

Press the fan ON/OFF button to turn

the fan on or off

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

BT ON/OFF KEY:

Press the BT ON/OFF button to turn

the

BT module on or off

15%

12%

9%

6%

3%

0%

DOWN

UP

2

5

8

16

14

11

SLOW

FAST

AUDIO PLAYER:

To use the Smooth Sound System

insert the audio cable in to the audio

jack on the console and in to the

head phone output of your Mp3

player.

USB CHARGER & BT LED

The Usb Charger will provide

maximum 2A current.

Bt Led will turn led when Bt Switch is

on and will turn green when App is

connected

SPEED AND INCLINE BUTTONS：

Press the speed and incline buttons

on the handrails to increase and

decrease the speed and incline of the

treadmill.

La page charge ...

Smooth Fitness smt-935bt Manuel utilisateur

Smooth Fitness smt-935bt Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents