In Common With TP-100011 Guide d'installation

Marque
In Common With
Modèle
TP-100011
Taper
Guide d'installation
Tipi Floor Lamp incommonwith.com
Tipi Floor Lamp
Assembly Guide
Tipi Floor Lamp incommonwith.com
Thank you for choosing In Common With. Please
confirm that you received all of the components
pictured in this guide, and reach out to us if anything
is missing. It’s rare, but it happens. We hope you enjoy
your fixture. With proper care, it should last a lifetime.
Have questions? Please contact us at
support@incommonwith.com.
CAUTION!
As a safety feature, this lamp has a polarized plug to reduce the risk of electric shock. This
means it has two flat prongs and a third circular prong underneath, and it will fit in an outlet
one way only. If the plug does not fit fully and easily into the outlet, do not force it; contact
a qualified electrician.
ATTENTION!
Par mesure de sécurité, cette lampe a une fiche polarisée pour réduire le risque de choc
électrique. Cela signifie qu’il a deux broches plates et une troisième broche circulaire en
dessous, et qu’il ne s’insère dans une prise que dans un seul sens. Si la fiche ne s’insère
pas complètement et facilement dans la prise, ne la forcez pas; contactez un électricien
qualifié.
!
Tipi Floor Lamp incommonwith.com
Components
Floor Stem Floor Base
Tipi Shade 3-inch Stem
E12 Tala Sphere I, 3W (2)
Type A Cap
Tipi Floor Lamp incommonwith.com
Attach the 1-inch to the Floor Stem by rotating it clockwise. Attach the Floor Stem to the Floor Base by aligning the threads and rotating
clockwise until secure.
Step 1 Step 2
Tipi Floor Lamp incommonwith.com
Attach the Tipi Shade to the lamp base by aligning the hole in the shade with the
hole in the stem. Screw the Type A Cap through the hole in the shade and into the
threaded hole at the stem’s top and rotate clockwise until secure.
Screw the included lightbulbs into the fixture sockets.
Step 3 Step 4
Tipi Floor Lamp incommonwith.com
Plug in the cord and turn on the light.
Step 5
Tipi Floor Lamp incommonwith.com
Never use scouring pads or abrasive cleaning
solutions. If it comes in a bottle, its bad for your
fixture. Instead, we recommend using soft microfiber
cloths, which are gentler on our products and the
planet.
For Metal: Wipe with a damp or dry microfiber cloth.
Please note that our brass is unlaquered, and will
darken naturally over time.
For Glass: Wipe clear or colored glass with a damp
microfiber cloth. For sandblasted or etched glass, use
a dry microfiber cloth. Removable glass shades can be
washed carefully in a sink using warm or hot water.
For Ceramic: Wipe with a damp microfiber cloth. Do
not submerge in water.
Care Instructions
Tipi Floor Lamp incommonwith.com
We accept returns for store credit only, minus a 15%
restocking fee. We do not accept returns on pieces
from the Handmade, Disc, Terra, or Flora series, or on
items that are not in their original condition. Custom
and Rush orders are final sale. Please note that
shipping charges are non-refundable.
To request a return, email sales@incommonwith.
com within ten days of recieving your order. Requests
must be approved before a return can be processed.
Requests made after ten days will not be accepted.
All products that come in their own box, including
but not limited to light bulbs and accessories, must be
returned in their original, undamaged box as this is
considered part of the product.
We deserve the right to reject any returned items that
do not meet the above requirements. If your return is
rejected you will be notified via email.
Return Policy
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

In Common With TP-100011 Guide d'installation

Marque
In Common With
Modèle
TP-100011
Taper
Guide d'installation
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes