iPhone 6+
iPhone 6s+
iPhone 7+
USB connection
Product Overview
iDynamo 5 (Gen II) offers MagneSafe
®
security and delivers
open standards encryption with simple, yet proven DUKPT
key management, immediate tokenization of card data and
MagnePrint
®
card authentication to maximize data protection and
prevent the use of counterfeit cards. Mobile merchants can now
leverage the power of their iPhone products without the worries of
handling or storing sensitive card data at any time.
Major Components
Power and Charging
iDynamo 5 (Gen II) is powered through the iOS device, only uses
power during a transaction, and uses a MagTek cable (noted
below)for charging the iOS Device.
Apple Power Adapter is Required
The charging source must be specied by Apple and be specic to
the iOS device to which iDynamo 5 (Gen II) is attached. To charge
your iOS device while iDynamo 5 (Gen II) is attached, connect the
MagTek cable (noted below) and then connect the opposite end to
the appropriate Apple charging adapter.
MagTek Cable
ONLY use MagTek USB cable PN 1000005076 (3ft) or
PN 1000007268 (6ft) to charge the iOS device. A MagTek cable
will be included with your reader and is required.
CAUTION: Failure to use MagTek cable with the Apple
supplied adapter will VOID MagTek Limited Warranty.
Connection
Compatible with iOS Lightning connector devices. Adapter sleeves
make attaching to iOS devices simple and provide more stability.
iDynamo 5 (Gen II) comes with several stability adapter sleeves.
Part Number Description
21041140 For iPhone 8+, iPhone 7+, iPhone 6+
21041139 For iPhone 8, iPhone 7, iPhone 6
21041088 For iPhone 5/5s
1000001920 For iPad Air 2
21041137 For iPad Air, iPad mini 3, iPad mini with Retina display,
iPad (5th, 6th, 7th, and 8th generation)
21041086 For iPad with Retina Display
Optional adapter kits are available.
Part Number Description
21073144 Adapter Kit for iPad Air 2; iPhone 8+/7+/6+; iPhone 7/6/8; iPhone
5c; iPhone 5/5s; iPad mini 3, iPad mini with Retina display; iPad
mini; iPad Air, iPad with Retina Display; iPod touch 5th gen
21073107 Adapter Kit for iPhone 4, iPad, iPad 2 / 3 & iPod touch 3 & 4,
iPhone 3GS
21041054 Adapter Kit for iPad 2/3
Connect adapter sleeve to iDynamo 5 (Gen II) by sliding adapter
on. Then connect to Lightning host device.
CAUTION: DO NOT TWIST OR BEND THE LIGHTNING
CONNECTOR.
Type C connection
iDynamo 5 (Gen II)
Secure Card Reader Authenticator
Quick Installation Guide
Setup and Installation
iPad Air 2 iPad Air
iPad mini 3,
iPad Mini with Retina Display
iPad (5th, 6th, 7th, and 8th generation)
iPad with
Retina Display
iPhone 5s iPhone 5iPhone 6
iPhone 7
iPhone 8
MagTek
®
Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com
Compatibility
iDynamo 5 (Gen II) PN 21087013 works with Lightning connector
host devices. Made for iPhone X, iPhone 8, iPhone 8 Plus, iPhone
7, iPhone 7 Plus, iPhone 6s Plus, iPad Pro 9.7-inch, iPad Pro 12.9-
inch (1st generation), iPad mini 4, iPad mini 3, iPad Air 2, iPad Air,
and iPad (5th, 6th, 7th and 8th generation).
Card Read
A card may be swiped through the reader slot. The magnetic stripe
must be inside the magnetic stripe path with the magstripe facing
away from the embossed lock on the front of the card reader.
iDynamo 5 (Gen II) is a bi-directional reader, cardholders may
swipe in either direction along the path.
Commands
The acquirer or manufacturer congures the encryption keys
before deployment. Operators need only set up a host with
appropriate software, congure the software, and connect
the device to the host. Some applications include a visual
indication of whether the device is active or not. Contact your
representative to learn where you can download your application.
Technical Support
When contacting the support team please have power to your
reader and have the part number and serial number(s) available,
contact [email protected]
Registered to ISO 9001:2015 © Copyright 2021 MagTek, Inc. PN D998200283 rev 80 3/21
MagTek ® Inc., 1710 Apollo Court, Seal Beach CA 90740 p 562-546-6400 | f 562-546-6301 | www.magtek.com
Use and Compliance
Legal
“Made for iPhone” and “Made for iPad” means that an electronic accessory has been designed
to connect specically to iPhone and iPad, and has been certied by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
Please note that the use of this accessory with an Apple product may affect wireless performance.
iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
iPhone and iPad not included.
Please note that the use of this accessory with an Apple product may affect wireless performance.
Apple®, Apple Pay®, OS X®, iPhone®, iPad®, iPad Air®, iPad Pro®, Lightning®, and Mac® are
trademarks of Apple Inc., registered in the U.S. and other countries. EMV® is a registered
trademark in the U.S. and other countries and an unregistered trademark elsewhere. The
EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four
graduating arcs, is a trademark owned by and used with permission of EMVCo, LLC.
Compliance
FCC WARNING STATEMENT: This equipment has been tested and was found to comply with the
limits for a Class B digital device pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference with radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
FCC COMPLIANCE STATEMENT: This device complies with Part 15 of the FCC Rules. Operation
of this device is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CANADIAN DOC STATEMENT: This digital apparatus does not exceed the Class B limits for
radio noise from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada.
CE STANDARDS: Testing for compliance with CE requirements was performed by an independent
laboratory.
The unit under test was found compliant with standards established for Class B devices.
UL/CSA: This product is recognized per Underwriter Laboratories and Canadian Underwriter
Laboratories 1950.
RoHS STATEMENT: When ordered as RoHS compliant, this product meets the Electrical and
Electronic Equipment (EEE) Reduction of Hazardous Substances (RoHS) European Directive
2002/95/EC. The marking is clearly recognizable, either as written words like “Pb-free”, “lead-free”,
or as another clear symbol ( ).
Pb
-
1
-
2
Magtek iDynamo 5 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Magtek iDynamo 5 User manual
Documents connexes
-
Magtek iDynamo Manuel utilisateur
-
Magtek eDynamo Quick Installation Guide
-
Magtek DynaPAD Quick Installation Guide
-
-
Magtek DynaFlex Kiosk Family Quick Installation Guide
-
-
Magtek Dynamag Quick Installation Guide
-
-
-