Samsung EO-MN910 Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur

Ce manuel convient également à

Full User Manual Online:
For more information, refer to the user manual at www.samsung.com/support
The manual is available as an Adobe Acrobat le (.pdf). If you do not have Adobe Reader,
you can download the free program at www.adobe.com
Headquarters:
1301 East Lookout Drive Richardson, TX 75082
Customer Care Center: 1-800-SAMSUNG
EO-MN910
GH68-xxxxxx
NA. 07/2014. sample
Images and contents of this manual may differ from the product.
Make sure you have the following items: headset, charging case, travel adapter, ear rubbers
and user manual. The supplied items may vary.
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Make sure the headset is
fully charged before using it for the first time.
Use only Samsung-approved chargers. Unauthorized or Non-Samsung chargers could cause
damage to the headset or in extreme circumstances an explosion, it could also invalidate any
warranty on the product.
Charge the charging case. When it is fully charged, the indicator light is changed to blue color. 1
With fully charged case, approximately 2-3 times charging possible.
Put your headset in the fully charged case and then turn on the case. 2
When the indicator light on the headset is changed to blue color, turn off the portable charger.3
Turning the headset on or off
To turn the headset on, slide the Power switch on. The blue indicator light flashes 4 times.
Turning the headset on for the first time, it will automatically enter pairing mode for approx. 3
minutes.
To turn the headset off, slide the Power switch off. The indicator light flashes blue and red then
turns off.
Turning the indicator light on or off
The Headset status light is there to show you the current status of your headset, but if it bothers you
at night, you can turn it off.
Press and hold both Volume buttons simultaneously to turn the indicator light on or off.
You cannot switch the indicator off while in pairing mode.
The indicator light will always work when the headset is turned on or off, when a call is
received, in Pairing mode and when the battery is low.
Wearing the headset
Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly.
If the ear rubber does not fit your ear, replace it with the other.
Pairing and connecting the headset with a phone
Pairing and connecting the headset with a phone
Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.)1
Press and hold the Talk button for 3 seconds.
Activate the Bluetooth feature on your phone and search for the headset (see your phones user 2
manual).
Select the headset (EO-MN910) from the list of devices found by your phone3
If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your 4
phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it
on.
Reconnecting the headset
If the connection is lost while in use :
Press the Talk button on the headset or use the Bluetooth menu on your phone.
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone.
Safety information
To prevent injury to yourself and others or damage to your device, read the safety information about your
device before using the device.
Do not use your device with wet hands.
Never crush or puncture the device.
Do not insert the device or supplied accessories into the eyes, ears, or mouth.
Follow all local regulations when disposing of used battery or device.
Follow all safety warnings and regulations when using your device in restricted areas - driving, hospital,
potentially explosive environments, aircraft
Do not use the device during a thunderstorm.
Do not store your device in very hot or very cold areas. It is recommended to use your device at
temperatures from 5 °C to 35 °C.
Do not store your device near magnetic fields.
Do not use or store your device in areas with high concentrations of dust or airborne materials.
Keep your device dry. If your device is wet, turn it off. Then, dry the device with a towel and take it to a
service centre.
Do not disassemble, modify, or repair your device. If your device needs servicing, take it to a service centre.
Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds
while driving may distract your attention and cause an accident.
Ending a call
Press the Talk button to end a call.
Options available during a call
You can use the following functions during a call.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that the person with
whom you are speaking cannot hear you. When the microphone is turned off, the headset beeps
at regular intervals. Press and hold the Volume up or down button again to turn the microphone
back on.
Transferring a call from the phone to the headset
Press the Talk button on the headset to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
FCC
FCC ID: A3LEO
-MN910
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
The device and its antenna must not be co-located or operating in conjunction with any other antenna
or transmitter. Users are not permitted to make changes or modify the device in any way. Changes or
modifications not expressly approved by Samsung will void the user’s authority to operate the
equipment.
Any changes or modifications (including the antennas) to this device that are not expressly approved by
the manufacturer may void the user's authority to operate the equipment.
Copyright
Copyright © 2014 Samsung Electronics
This user manual is protected under international copyright laws. No part of this user manual may be
reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical,
including photocopying, recording, or storing in any information storage and retrieval system, without
the prior written permission of Samsung Electronics.
SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics.
Bluetooth
®
is a registered trademark of the Bluetooth SIG, Inc. worldwide. More information about
Bluetooth is available at www.bluetooth.com
All other trademarks and copyrights are the property of their respective owners.
Using call functions
Available call functions may differ from phone to phone.
Operating range : Up to 10 metres
Making a call
Redialing the latest number
Press and hold the Talk button. Some phones open the call log list. Press the Talk button again to
dial the selected number.
Dialing a number by voice
Press the Talk button.
Answering a call
Press the Talk button to answer a call when a call comes in.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
Trademarks
Industry Canada
IC ID: 649E-EOMN910
RSS-GEN, Sec. 7.1.3
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device. The term “IC:” before the certification/registration number only signifies that registration was
performed based on a Declaration of Conformity indicating that Industry Canada technical specifications
were met. It does not imply that Industry Canada approved the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement
Industry Canada RF Radiation Exposure Statement: Industry Canada RF Radiation
Exposure Statement: This equipment complies with Industry Canada RF Radiation
exposure limits set forth for an uncontrolled environment. This device and its antenna
must not be co-located or operating in conjunction with any other antenna or
transmitter.
RF de l'Industrie Canada d'exposition aux radiations: Cet équipement est conforme à
l'exposition de l'Industrie Canada rayonnements RF limites établies pour un
environnement non contrôlé. L’antenne pour ce transmetteur ne doit pas être même
endroit avec d’autres émetteurs sauf conformément à l'Industrie Canada procédures
de produits Multi-émetteur.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Samsung EO-MN910 Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues