Tunturi E100 Le manuel du propriétaire

Attention, Achtung, Attention, Attentie

- Please read this Owner’s manual before assembling this product.

- Bitte lesen Sie dieses Handbuch durch, bevor Sie mit er Montage dieses Produkts beginnen.

- Veuillez lire ce manuel avant de commencer le montage de ce produit.

- Leest u deze handleiding voordat u dit apparaat installeert.

www.tunturi.com

User manual

Benutzerhandbuch

Manuel de l’utilisateur

Gebruikershandleiding

Serial number

Seriennummer

Numéro de série

Serienummer

3

Star Fit E100 HR i

A

4

Star Fit E100 HR i

B

5

Star Fit E100 HR i

C

100 cm

D-0

6

Star Fit E100 HR i

D-1

7

Star Fit E100 HR i

D-2

8

Star Fit E100 HR i

D-3

13

9

Star Fit E100 HR i

D-4

B

C

A

D

10

Star Fit E100 HR i

D-5

11

Star Fit E100 HR i

E-1

E-2

12

Star Fit E100 HR i

F-01

F-02

P1

P2

P3

P4

P5

P6

P7

P8

P9

P10

P11

P12

13

English

Index

Upright Bike ...................................................... 13

Safety warnings ................................................ 13

Electrical safety 14

Description (g. A) 14

Package contents (g. B & C) 14

Assembly (g. D) 14

Workouts ...........................................................14

Exercise Instructions 14

Heart rate 15

Use ..................................................................... 16

Power supply (Fig. E-1) 16

Console (g F) .................................................. 16

Explanation Display functions 16

Explanation of buttons 17

Opperation 17

Programs 17

Bluetooth & APP 19

Cleaning and maintenance .............................. 19

Defects and malfunctions 19

Transport and storage...................................... 19

Additional information 19

Technical data ................................................... 19

Warranty ............................................................ 20

Declaration of the manufacturer ..................... 20

Disclaimer ......................................................... 20

Upright Bike

Welcome to the world of Tunturi New Fitness!

Thank you for purchasing this piece of Tunturi

equipment. Tunturi offers a wide range of home fitness

equipment, including crosstrainers, treadmills, exercise

bikes and rowers. The Tunturi equipment is suitable for

the entire family, no matter what fitness level. For more

information, please visit our website

www.tunturi.com

Safety warnings

WARNING

• Read the safety warnings and the instructions.

Failure to follow the safety warnings and the

instructions can cause personal injury or damage

to the equipment. Keep the safety warnings and

the instructions for future reference.

- The equipment is suitable for domestic use only.

The equipment is not suitable for commercial use.

- Max. usage is limited to 3 hrs a day.

- The use of this equipment by children or persons

with a physical, sensory, mental or motorial

disability, or lack of experience and knowledge can

give cause to hazards. Persons responsible for their

safety must give explicit instructions or supervise

the use of the equipment.

- Before starting your workout, consult a physician to

check your health.

- If you experience nausea, dizziness or other

abnormal symptoms, immediately stop your

workout and consult a physician.

- To avoid muscular pain and strain, start each

workout by warming up and finish each workout by

cooling down. Remember to stretch at the end of

the workout.

- The equipment is suitable for indoor use only. The

equipment is not suitable for outdoor use.

- Only use the equipment in environments with

adequate ventilation. Do not use the equipment in

draughty environments in order not to catch a cold.

- Only use the equipment in environments with

ambient temperatures between 10 °C and 35 °C.

Only store the equipment in environments with

ambient temperatures between 5 °C and 45 °C.

- Do not use or store the equipment in humid

surroundings. The air humidity must never be more

than 80%.

- Only use the equipment for its intended purpose.

Do not use the equipment for other purposes than

described in the manual.

- Do not use the equipment if any part is damaged or

defective. If a part is damaged or defective, contact

your dealer.

- Keep your hands, feet and other body parts away

from the moving parts.

- Keep your hair away from the moving parts.

- Wear appropriate clothing and shoes.

- Keep clothing, jewellery and other objects away

from the moving parts.

- Make sure that only one person uses the equipment

at a time. The equipment must not be used by

persons weighing more than 110 kg (242 lbs).

- Do not open equipment without consulting your

dealer.

14

English

Electrical safety

(Only for equipment with electric power)

- Before use, always check that the mains voltage is

the same as the voltage on the rating plate of the

equipment.

- Do not use an extension cable.

- Keep the mains cable away from heat, oil and sharp

edges.

- Do not alter or modify the mains cable or the mains

plug.

- Do not use the equipment if the mains cable or the

mains plug is damaged or defective. If the mains

cable or the mains plug is damaged or defective,

contact your dealer.

- Always fully unwind the mains cable.

- Do not run the mains cable underneath the

equipment. Do not run the mains cable underneath

a carpet. Do not place any objects on the mains

cable.

- Make sure that the mains cable does not hang over

the edge of a table.

- Make sure that the mains cable cannot be caught

accidentally or tripped over.

- Do not leave the equipment unattended when the

mains plug is inserted into the wall socket.

- Do not pull the mains cable to remove the mains

plug from the wall socket.

- Remove the mains plug from the wall socket when

the equipment is not in use, before assembly or

disassembly and before cleaning and maintenance.

Description (fig. A)

Your upright bike is a piece of stationary fitness

equipment used to simulate cycling without causing

excessive pressure to the joints.

Package contents (fig. B & C)

- The package contains the parts as shown in

fig. B.

- The package contains the fasteners as shown in fig.

C. Refer to the section “Description”

NOTE

• If a part is missing, contact your dealer.

Assembly (fig. D)

WARNING

• Assemble the equipment in the given order.

• Carry and move the equipment with at least two

persons.

CAUTION

• Place the equipment on a firm, level surface.

• Place the equipment on a protective base to

prevent damage to the floor surface.

• Allow at least 100 cm of clearance around the

equipment.

• Refer to the illustrations for the correct assembly

of the equipment.

Workouts

The workout must be suitably light, but of long

duration. Aerobic exercise is based on improving

the body’s maximum oxygen uptake, which in turn

improves endurance and fitness. You should perspire,

but you should not get out of breath during the

workout.

To reach and maintain a basic fitness level, exercise at

least three times a week, 30 minutes at a time. Increase

the number of exercise sessions to improve your fitness

level. It is worthwhile to combine regular exercise with

a healthy diet. A person committed to dieting should

exercise daily, at first 30 minutes or less at a time,

gradually increasing the daily workout time to one hour.

Start your workout at low speed and low resistance to

prevent the cardiovascular system from being subjected

to excessive strain.

As the fitness level improves, speed and resistance can

be increased gradually. The efficiency of your exercise

can be measured by monitoring your heart rate and

your pulse rate.

Exercise Instructions

Using your fitness trainer will provide you with several

benefits, it will improve your physical fitness, tone

muscle and in conjunction with a calorie controlled diet

help you lose weight.

The warming up phase

This stage helps get the blood flowing around the body

and the muscles working properly. It will also reduce

the risk of cramp and muscle injury. It is advisable to do

a few stretching exercises as shown below. Each stretch

should be held for approximately 30 seconds, do not

force or jerk your muscles into a stretch - if it hurts,

STOP

15

English

The exercise phase

This is the stage where you put the effort in. After

regular use, the muscles in your legs will become

more flexible. Work to your but it is very important to

maintain a steady tempo throughout. The rate of work

should be sufficient to raise your heart beat into the

target zone shown on the graph below.

200

180

160

140

120

100

80

20 25 30 35 40 45 50 55 60 65 70 75

85 %

70 %

AGE

MAXIMUM

COOL DOWN

HEART RATE

TARGET ZONE

This stage should last for a minimum of 12 minutes

though most people start at about 15-20 minutes

The cool down phase

This stage is to let your Cardiovascular System and

muscles wind down. This is a repeat of the warm

up exercise e.g. reduce your tempo, continue for

approximately 5 minutes. The stretching exercises

should now be repeated, again remembering not to

force or jerk your muscles into the stretch.

As you get fitter you may need to train longer and

harder. It is advisable to train at least three times a

week, and if possible space your workouts evenly

throughout the week.

Muscle toning

To tone muscle while on your fitness trainer you will

need to have the resistance set quite high. This will

put more strain on our leg muscles and may mean you

cannot train for as long as you would like. If you are also

trying to improve your fitness you need to alter your

training program. You should train as normal during the

warm up and cool down phases, but towards the end

of the exercise phase you should increase resistance

making your legs work harder. You will have to reduce

your speed to keep your heart rate in the target zone.

Weight loss

The important factor here is the amount of effort you

put in. The harder and longer you work the more

calories you will burn. Effectively this is the same as if

you were training to improve your fitness, the difference

is the goal.

Heart rate

Pulse rate measurement

(hand pulse sensors)

The pulse rate is measured by sensors in the handlebars

when the user is touching both sensors at the same

time. Accurate pulse measurement requires that the

skin is slightly moist and constantly touching the hand

pulse sensors. If the skin is too dry or too moist, the

pulse rate measurement will become less accurate.

NOTE

• Do not use the hand pulse sensors in

combination with a heart rate chest belt.

• If you set a heart rate limit for your workout, an

Maximum heart rate

(during training)

The maximum heart rate is the highest heart rate a

person can safely achieve through exercise stress. The

following formula is used to calculate the average

maximum heart rate: 220 - AGE. The maximum heart

rate varies from person to person.

WARNING

• Make sure that you do not exceed your

maximum heart rate during your workout. If you

belong to a risk group, consult a physician.

Beginner

50-60% of maximum heart rate

Suitable for beginners, weight-watchers, convalescents

and persons who have not exercised for a long time.

Exercise at least three times a week, 30 minutes at a

time.

Advanced

60-70% of maximum heart rate

Suitable for persons who want to improve and maintain

fitness. Exercise at least three times a week, 30 minutes

at a time.

Expert

70-80% of maximum heart rate

Suitable for the fittest of persons who are used to long-

endurance workouts.

16

English

Use

Adjusting the support feet

The equipment is equipped with 4 support feet. If

the equipment is not stable, the support feet can be

adjusted.

- Turn the support feet as required to put the

equipment in a stable position.

- Tighten the lock-nuts to lock the support feet.

NOTE

- The machine is the most stable when all support

feet are turned fully in. Therefore start to level the

machine by turning all support feet fully in, before

turning out the required support feet to stable the

machine. .

Adjusting the vertical seat position

The vertical seat position can be adjusted by setting the

seat tube to the required position. With the leg almost

straight, the arch of the foot must touch the pedal at its

lowermost point.

- Loosen the seat tube adjustment knob.

- Move the seat tube to the required position.

- Tighten the seat tube adjustment knob.

Adjusting the horizontal seat position

(fig. E-2)

The horizontal seat position can be adjusted by setting

the seat to the required position.

- Loosen the quick release lever under the seat.

- Slide the seat forward or backward as desired.

- Tighten the quick release lever.

Adjusting the handlebar

The handlebar can be adjusted according to the height

and the exercise position of the user.

- Loosen the handlebar adjustment knob.

- Move the handlebar to the required position.

- Tighten the handlebar adjustment knob.

Power supply (Fig. E-1)

The trainer is powered by an external power supply.

Refer to the illustration to locate the trainer power

input.

NOTE

• Connect the power supply with the trainer

before connecting it to the wall outlet.

• Always remove power cord when

• machine is not in use.

Console (fig F)

1

3

2

1. Display

2. Tablet/ book support

3. Buttons

CAUTION

• Keep the console away from direct sunlight.

• Dry the surface of the console when it is covered

with drops of sweat.

• Do not lean on the console.

• Only touch the display with the tip of your finger.

Make sure that your nails or sharp objects do not

touch the display.

NOTE

• The console switches to standby mode when the

equipment is not used for 4 minutes.

Explanation Display functions

Time

- Without setting the target value, time will count up.

- When setting the target value, time will count down

from your target time to 0 and alarm will sound or

flash.

- Without any signal being transmitted into the

monitor for 4 seconds during workout, time will

STOP

- Range 0:00~99:59

Speed

- Displays current training speed.

Maximum speed is 99.9 KM/H or ML/H.

- Without any signal being transmitted into the

monitor for 4 seconds during workout, SPEED will

display “0.0”

17

English

RPM

- Displays the Rotation Per Minute.

Display range 0~15~999

- Without any signal being transmitted into the

monitor for 4 seconds during workout, RPM will

display “0”

WATTS

- Display current workout watts.

- Range 0 ~ 999

LOAD

- Shows tension level setting, when adjusting

resistance, for 3 seconds.

Distance

- Without setting the target value, distance will count

up.

- When setting the target value, distance will count

down from your target distance to 0 with an alarm

sound or flash.

- Range 0.00~99.99

Calories

- Without setting the target value, calorie will count

up.

- When setting the target value, calories will count

down from your target calorie to 0 with an alarm

sound or flash.

- Range 0~9999.

NOTE

• This data is a rough guide for comparison of

different exercise sessions which cannot be used

in medical treatment

Pulse

- Current pulse will display after 6 seconds when

detected by the console.

- Without any pulse signal for 6 seconds, console will

display “P”.

- Pulse alarm will sound when current pulse is over

the target pulse.

- Range 0-30~230 BPM

Explanation of buttons

Up

- Increase resistance level

- Setting selection.

Down

- Decrease resistance level

- Setting selection.

Mode

- Confirm setting or selection.

Reset

- In setting mode, press RESET key once to reset the

current function figures.

- Press RESET key and hold for 2 seconds to reset all

function figures

Start/ Stop

- Start or Stop workout

Body Fat

- Test body fat% and BMI in stop mode.

Recovery

- Test heart rate recovery status.

Opperation

Power on

- Plug in power supply to power on computer.

- Press any key to power on the console when being

in sleep mode..

- Start pedalling to power on the console when being

in sleep mode.

LCD will display all segments (fig. - F-01)

Power off

Without any signal being transmitted into the monitor

for 4 minutes the monitor will enter SLEEP mode

automatically. ( Active training data will be lost )

Workout selection

Use UP/ DOWN to select:

- Manual

- Program

- User Program

- H.R.C.

- Watt

Programs

Quick start

- Press START/ STOP key to start your workout

without any pre-set setting.

- Use UP/ DOWN to adjust resistant level during

workout.

End your workout

- Press START/ STOP in workout mode to stop/

pause your workout.

To resume your workout press START/ STOP button

in pause mode.

- Press and hold RESET key for over 2 seconds to

reset console. ( Active training data will be lost )

18

English

Manual mode

- Use UP/ DOWN key to select workout program,

choose MANUAL mode and press mode key to

enter next setting entry for manual mode program.

- Use UP/ DOWN key to pre-set training time, and

press M to confirm the setting.

- After confirm you can set also:

distance, Calories, and Pulse.

NOTE

• When setting more than one goal, the training

will end at first achieved goal.

• Leave a goal blank and it will not be seen as a

pre-set limit.

- Press START/ STOP key to start workout

- Use UP/ DOWN key to adjust resistance level. Load

level is shown in LOAD window.

Program mode

- Use UP/ DOWN key to select workout program, and

select MODE to confirm.

- Use UP/ DOWN key to select Program P1 ~ P12

and press MODE to confirm. ( fig. F-02)

- Use UP/ DOWN key to set TIME.

- Press START/ STOP key to start workout.

Press START/STOP key to pause workout.

- Use RESET to go back to main menu.

User Program

- Use UP/ DOWN key to select workout program, and

select MODE to confirm.

- Use UP/ DOWN key to create user profile.

- Set tension level for first of 20 colums, and confirm

with MODE to set second level, repeat this for all

colums.

- Press and hold MODE button for 2 seconds to

confirm program setting.

- Press START/ STOP key to start workout.

Press START/STOP key to pause workout.

- Use RESET to go back to main menu.

H.R.C. mode.

- Use UP/ DOWN key to select workout program,

choose H.R.C. mode and press mode key to enter

next setting entry for H.R.C. mode program.

- Use UP/ DOWN key to set age.

- Use UP/ DOWN key to select 55%, 75%, 90% or

TAG (Target H.R. _ Default 100)

- Use UP/ DOWN key to set time, press MODE to

confirm.

- Press START/ STOP key to start workout

- Use RESET, to go back to main menu.

Watt Mode.

- Use UP/ DOWN key to select workout program,

choose WATT and press MODE / ENTER key to

enter next setting entry for WATT mode program.

- Use UP/ DOWN to set WATT target.

(default: 120Watt)

- Use UP/ DOWN key to set TIME.

- Press START/ STOP key to start workout.

Use UP/ DOW) to adjust target Watt level.

- Press START/STOP key to pause workout.

- Use RESET to go back to main menu.

Recovery

- The RECOVERY key will only be valid if pulse is

detected.

- TIME will show „0:60“ (seconds) and counts down

to 0.

- Computer will show F1 to F6 after the countdown

to test heart rate recovery status. User can find the

heart rate recovery level based on the chart below.

- Press RECOVERY key again to return to the

beginning.

F1 Outstanding

F2 Excellent

F3 Good

F4 Fair

F5 Below average

F6 Poor

Body Fat

- Press the BODY FAT key to start body fat

measurement.

- During measuring, users have to hold both hands

on the hand grips. LCD display “-” “- -” “- - -” “- - -

-” for 8 seconds until computer finish measuring.

- LCD will display BMI and FAT %.

Body fat mode error codes

- *E-1

There is no heart rate signal input detected.

- *E-4

Occurs when FAT% and BMI result is below 5 or

exceeds 50.

Trouble shooting:

- If there is no signal when you pedal, please check if

the cable is well connected.

NOTE

• When stop training for 4 minutes, the main

screen will be off.

• If the computer displays abnormally, please re-

install the transformer and try again.

19

English

Bluetooth & APP

- This console can connect with an APP on a smart

device by Bluetooth.

- Once console is connected to a smart device via

Bluetooth, the console will power off.

NOTE

• Tunturi only provides the option to connect

your fintess console throughout a blue tooth

connection. Therefore Tunturi cannot be held

resposible for damage, or malfunctioning of

products other than Tunturi products.

Console connects best with:

“Fit Hi Way”

Developed by: Chang yow.

Search in App store (iOS) for : fit hi way

Search in Play store (Android) for : Fit Hi Way

“Kinomap Fitness

Developed by: Kinomap.

Search in App store (iOS) for : Kinomap fitness

Search in Play store (Android) for : Kinomap fitness

Cleaning and maintenance

The equipment does not require special maintenance.

The equipment does not require recalibration when

it is assembled, used and serviced according to the

instructions.

WARNING

• Do not use solvents to clean the equipment.

• Clean the equipment with a soft, absorbent cloth

after each use.

• Regularly check that all screws and nuts

are tight.

• If necessary, lubricate the joints.

Defects and malfunctions

Despite continuous quality control, defects and

malfunctions caused by individual parts can occur in the

equipment. In most cases, it will be sufficient to replace

the defective part.

- If the equipment does not function properly,

immediately contact the dealer.

- Provide the model number and the serial number of

the equipment to the dealer. State the nature of the

problem, conditions of use and purchase date.

Transport and storage

WARNING

• Carry and move the equipment with at least two

persons.

• Remain standing in front of the equipment

on each side and take a sturdy grip at the

handlebars. Tilt the front of the equipment

so as to lift the rear of the equipment on the

wheels. Move the equipment and carefully put

the equipment down. Place the equipment on a

protective base to prevent damage to the floor

surface.

• Move the equipment carefully over uneven

surfaces. Do not move the equipment upstairs

using the wheels, but carry the equipment by the

handlebars.

• Store the equipment in a dry place with as little

temperature variation as possible.

Additional information

Packaging disposal

Government guidelines ask that we reduce the amount

of waste material disposed of in land fill sites. We

therefore ask that you dispose of all packaging waste

responsibly at public recycling centres.

End of life disposal

We at Tunturi hope you enjoy many years of enjoyable

use from your fitness trainer. However, a time will come

when your fitness trainer will come to the end of its

useful life. Under ‘European WEEE Legislation you are

responsible for the appropriate disposal of your fitness

trainer to a recognised public collection facility.

Technical data

Parameter Unit of

measurement

Value

Length cm

inch

98

38.6

Width cm

inch

55

21.7

Height cm

inch

137

53.9

Weight kg

lbs

30.0

66.1

20

English

Max. user weight kg

lbs

120

265

Adapter

Voltage

Current

V

Ma.

9V-DC

1.3A

Warranty

Tunturi purchaser‘s warranty

Warranty terms

The consumer is entitled to the applicable legal

rights stated in the national legislation concerning the

commerce of consumer goods. This warranty does not

restrict these rights. The Purchaser’s Warranty is only

valid if the item is used in an environment approved by

Tunturi New Fitness BV for that particular equipment.

The product-specific approved environment is stated in

the Owner’s Manual provided with your equipment.

Warranty conditions

The warranty conditions commence from the date of

purchase. Warranty conditions may vary per country,

so please consult your local dealer for the warranty

conditions.

Warranty coverage

Under no circumstances shall Tunturi New Fitness

BV or the Tunturi Distributor be liable by virtue of

this warranty or otherwise for any special, indirect,

secondary or consequential damages of any nature

arising out of any use or inability to use this equipment.

Warranty limitations

This warranty covers manufacturing defects in the

fitness equipment as originally packed by Tunturi

New Fitness BV. The warranty shall apply only under

conditions of normal, recommended use of the product

as described in the Owner’s Manual and providing that

Tunturi New Fitness BV’s instructions for installation,

maintenance and use have been complied with. Neither

Tunturi New Fitness BV’s nor the Tunturi Distributors’

obligations apply to defects due to reasons beyond

their control. The warranty applies only to the original

purchaser and is valid only in countries where Tunturi

New Fitness BV has an authorised importer. The

warranty does not extend to fitness equipment or

components that have been modified without the

consent of Tunturi New Fitness BV. Defects resulting

from normal wear, misuse, abuse, corrosion, or damage

incurred during loading or transportation are not

covered.

The warranty does not cover sounds or noises emitted

during use where these do not substantially impede the

use of the equipment and where they are not caused

by a fault in the equipment. The warranty does not

cover defects arising from the failure to carry periodic

maintenance as outlined within the Owner’s Manual

for the product. Furthermore, the warranty does not

cover defects arising from usage and storage within

an unsuitable environment as described within the

Owner’s Manual which should be indoors, dry, dust

and grit free and within a temperature range of +15°C

to +35°C. The warranty does not cover maintenance

activities, such as cleaning, lubricating, and normal part

adjustments, nor installation

procedures that customers can accomplish themselves,

such as changing uncomplicated meters, pedals and

other similar parts not requiring any dismantling/

reassembling of the fitness equipment. Warranty

repairs carried out by other than authorised Tunturi

representatives are not covered.

Failure to follow the instructions given in the Owner’s

Manual will invalidate the product’s warranty.

Declaration of the

manufacturer

Tunturi New Fitness BV declares that the product is in

conformity with the following standards and directives:

EN 957 (HC), 89/336/EEC. The product therefore

carries the CE label.

07-2018

Tunturi New Fitness BV

Purmerweg 1

1311 XE Almere

The Netherlands

Disclaimer

The product and the manual are subject to change.

Specifications can be changed without further notice.

La page charge ...

Tunturi E100 Le manuel du propriétaire

Tunturi E100 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents