Motorola 89242N - EQ5 - Bluetooth hands-free Speakerphone Guide de démarrage rapide

Quick Start Guide

EQ5

MOTOROKR

TM

2

welcome

The MOTO

ROKR

™ EQ5 Ultra-Portable Wireless Speaker

is sleek, stylish and pocket-sized. It’s the perfect

companion to your MP3 player or music phone.

• Pocket portability

—The sleek, slim design fits

comfortably in your pocket, so your music and

speakerphone calls can go anywhere you go.

• Expand your sound

—The EQ5 delivers

high-definition stereo sound powered by SRS™

WOW HD™ enhanced audio technology.

• Don’t miss the call

—When paired with your

phone, the MOTO

ROKR

™ EQ5 doubles as a

speakerphone with echo-cancellation and

noise-reduction to keep you sounding clear.

Switch between music and calls with the touch

of a button.

• Wireless mobility

—Tangled wires are a thing of

the past. Bluetooth stereo connectivity cuts the

speaker cable, and the rechargeable battery

unplugs you from the wall. Integrated music and

call controls mean there’s no need to reach for

your phone, and your music automatically pauses

with each call.

3

Note:

Before using your speaker for the first

time, be sure to review the important safety and

legal pamphlet and follow instructions.

Periodically review this information so you

remember how to safely use your speaker.

4

before you begin

befor e you begin

Take a moment before you get started to familiarize

yourself with the components of your speaker.

Audio In

Port

(on side

behind flap)

Microphone

(on side)

Charging Port

and Light

(behind flap)

Main Indicator

Light

Call Button

Volume Buttons

Reverse Button

Power Switch

(on bottom)

Play/Pause

Button

Forward Button

5

charge your speaker

charge your speak er

You’ll need to charge your speaker’s battery for a

minimum of 1 hour using the included charger.

Note:

You can use the speaker while the battery charges.

1

Plug the charger into the charging port on your

speaker, as shown.

The Charging indicator light turns red when battery

is charging. It may take up to 1 minute for the

indicator light to turn on. When the speaker’s battery

is fully charged, the indicator light turns green.

2

Disconnect the charger.

Note:

This product uses a lithium ion, rechargeable,

non-replaceable battery. Under normal use, expected life

of the rechargeable battery is approximately 500 charges.

6

turn it on & off

To turn your speaker on and off

, slide the Power switch

to the ON position. The main indicator light flashes 3

times.

7

connect wirelessly

connect wirelessl y

To listen to your music via Bluetooth wireless

connection

, as well as make and receive handsfree

calls, you need to pair (link) your speaker with your

Bluetooth phone and/or music player.

1

Turn off any Bluetooth devices previously paired

with your speaker.

2

Turn on the Bluetooth feature on your Bluetooth

phone or music player.

3

Turn on your speaker.

The main indicator light is steadily lit in blue to

indicate the speaker is in discoverable mode.

4

Place phone or music player in Bluetooth search

mode.

The phone or music player searches for your

speaker.

5

Select

Motorola EQ5

from search results on your

phone or music player.

6

Select

OK

or

Ye s

to pair your speaker with your

phone or music player.

7

If prompted, enter

0000

for passkey.

8

connect wirelessly

When your speaker successfully pairs and connects with

your phone or music player, the main indicator light

flashes blue and purple. Music playing from your

connected music source is heard on your speaker.

Notes:

•

After successfully pairing your speaker and

Bluetooth device, you don't need to repeat these

steps. For each use, ensure that your speaker is

turned ON and that your device's Bluetooth

feature is ON.

•

Some music devices will automatically attempt

to play music when the EQ5 re-connects to it.

9

control your tunes

contr ol your tu nes

Playback controls on your speaker can be used when

listening to wireless music streaming from a

Bluetooth-enabled music player that also provides

remote control capabilities (AVRCP).

When remote control capabilities are not supported by

your music player, the EQ5 simply acts as a speaker, and

music should be controlled from your music player.

Press

—play/pause music

Press and hold

—stop music

Press

—skip to previous track

Press and hold

—rewind track*

Press

—skip to next track

Press and hold

—fast-forward track*

* If your music player supports this feature

10

crank it up

crank i t up

To adjust music volume

, use the Volume buttons on

your speaker.

You’ll hear a tone when maximum or minimum volume is

reached on your speaker.

Note:

The volume setting on your music player may

impact volume on your speaker.

Press

—decrease volume (step)

Press and hold

—decrease volume

(continuous)

Press

—increase volume (step)

Press and hold

—increase

volume (continuous)

11

handsfree calls

handsf ree call s

To make and receive calls using the speaker, a Bluetooth

handsfree (HFP) connection must be established with

your phone (see “connect wirelessly” on page 7 for

details).

You’ll use these controls and indicators on your speaker

when making and receiving handsfree calls.

Call ButtonVolume Buttons

Main

Indicator

Light

Reject

Call

Button

Microphone

Mute

Button

Reject

Call

Button

12

receive a call

recei ve a call

When there’s an incoming call, the main indicator light

flashes quickly in blue on your speaker, and you hear a

ring tone over your speaker. If music is playing when a

call is received, the music pauses or mutes, depending

on your music player and connection setup.

Press

—answer call

Press and hold (either button)

—reject call

13

while on a call

When a call is active, the main indicator light slowly

pulses in blue on your speaker.

Press

—adjust call volume (step)

Press and hold

—adjust call volume (continuous)

Press

—mute call (main

indicator light pulses

in purple while muted)

Press

—end call

14

while on a call

When there’s a second incoming call, the main indicator

light flashes quickly in blue on your speaker and you hear

an alert.

Press and hold (either button)

—

reject second incoming call*

* If your phone supports this feature

Press

—1) answer second call (first call is placed on hold),

2) end second call (first call resumes), or

3) resume first call on hold (when second caller hangs up)

15

make a call

make a ca ll

Using the speaker to make a call, you can redial the last

dialed number or make a voice dial call (if your phone

supports this feature). When making a voice dial call, the

microphone on the speaker is enabled, and you hear a

prompt from your phone.

Press

—make a voice dial call (you hear a

prompt from your phone)

Press and hold

—redial last number

16

cable connection

To listen to your music using a wired connection

,

connect your music player to the Audio port on your

speaker using the included audio cable.

Notes:

•

The Audio port functions as an input port from a

music device only (not as a headphone jack).

•

Playback controls provided on your speaker

cannot be used when listening to music input

from wired connection.

•

In wired connection, if no audio is heard turn up

volume on music device.

17

check your battery

check yo ur batt ery

To check your speaker’s battery charge level

, press

and hold both Volume buttons. The main indicator light

displays charge status until the Volume buttons are

released.

When your speaker is in a low battery charge state, the

main indicator light flashes quickly in red, and a tone is

repeated every minute.

Main Indicator Light Battery Charge Status

Red Less than 30% charge

Yellow Between 30% and 70%

charge

Green More than 70% charge

18

speaker status

The main indicator light on your speaker displays current

status of Bluetooth wireless connection(s) to your phone

and/or music player.

Main Indicator Light Wireless Status

steady blue pairing mode

long blue flash standby (handsfree

connection only)

long yellow flash standby (streaming music

connection only)

long green flash standby (both handsfree and

streaming music connection)

quick blue flash incoming/outgoing call

long blue pulse connected on a call

long purple pulse connected call muted

three green flashes started/paused music player

long green pulse music streaming (with

handsfree connection active)

19

speaker status

long yellow pulse music streaming (without

handsfree connection active)

long purple pulse music from wired connection

active

two yellow flashes SRS WOW HD on/off

three yellow flashes stopped music player

slow red flash idle (not connected to a

device)

Main Indicator Light Wireless Status

20

tips & tricks

multi-point (two device) connection

To connect to phone and music device at the same time:

1

Pair and connect to your phone first (see page 7).

2

Turn off your phone and your speaker.

3

Turn your speaker back on.

The Bluetooth indicator flashes to indicate the

speaker is in discoverable mode.

4

Turn on your music device. Make sure the Bluetooth

feature is turned on in the device.

The music device searches for your speaker.

5

Complete steps 5 through 7 on page 7 to pair and

connect your music device and speaker

successfully.

6

Turn off your speaker.

7

Turn your phone back on and make sure the

Bluetooth feature is turned on in both the phone and

music device.

8

Turn your speaker system back on. It should now

connect to both devices.

La page charge ...

Motorola 89242N - EQ5 - Bluetooth hands-free Speakerphone Guide de démarrage rapide

Ce manuel convient également à

Motorola 89242N - EQ5 - Bluetooth hands-free Speakerphone Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents