EcoFlow DELTA Max 1600 Manuel utilisateur

Marque: EcoFlow

Modèle: DELTA Max 1600

Taper: Manuel utilisateur

Ce manuel convient également à

DELTA Max 2000 Portable Power Station

EcoFlow DELTA Max User Manual

EcoFlow DELTA Max

（Hereinafter referred to as DELTA Max）

Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the

the product before use. Users take full responsibility for all usage and operations. Familiarize

yourself with the related regulations in your area. You are solely responsible for being aware

of all relevant regulations and using EcoFlow products in a way that is compliant.

DISCLAIMER

1. Specifications

4. FAQS

5. Troubleshooting

6. What’s In the Box

7. Storage & Maintenance

8. Fcc Statement

3.1 Product Details

3.2 LCD Screen

3.3 General Product Usage

3.4 AC Charging

3.5 Solar Charging

3.6 Car Charging

3.7 Using Smart Extra Battery

3.8 APP

3.9 X-Boost

3.10 Emergency Power Supply (EPS)

2. Safety Instructions

3. Getting Started

CONTENTS

2.1 Usage

2.2 Disposal Guide

1.1 Specifications of DELTA Max (2000)

1.2 Specifications of DELTA Max (1600)

Additional Connections

Supports up to 2 DELTA Max Smart Extra Batteries

(sold separately)

Supported (sold separately)

Smart Extra Battery

Smart Generator

1. Specifications

Input Ports

AC Charge

AC Input Voltage

Solar Charger

Car Charger

X-Stream Fast Charge 1800W Max, 15A

100-120V~ 50Hz/60Hz

11-100V 13A, 800W Max

Supports 12V/24V Battery, Default 8A

Max Device(s) Power Supported by X-Boost

USB-A (x2)

USB-A Fast Charge (x2)

USB-C (x2)

Car Charger

DC5521 Output (x2)

3400W

5V 2.4A 12W Max, per port

5V 2.4A 9V 2A 12V 1.5A 18W Max, per port

5/9/12/15/20V 5A 100W Max, per port

12.6V 10A, 126W Max

12.6V 3A, per port

General Info

Output Ports

Net Weight

Dimensions

Capacity

Wi-Fi

Approximately 48lbs

19.6x9.5x12in

2016Wh 50.4V

Supported

Battery Info

Cell Chemistry

Cycle Life

NCM

800 cycles to 80%+ capacity

* Car charger shares power with the DC5521 output port, offering a maximum output of 126W.

AC (x6) Pure Sine Wave, 2400W total (surge 5000W),

120V~ 60Hz

Environmental Operating Temperature

Optimal Operating Temperature

Discharge Temperature

Charge Temperature

Storage Temperature

* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.

Protection

Over Voltage Protection, Overload Protection, Over

Temperature Protection, Short Circuit Protection,

Low Temperature Protection, Low Voltage Protection,

Overcurrent Protection

1.1 Specifications of DELTA Max (2000)

68°F to 86°F(20°C to 30°C)

-4°F to 113°F (-20°C to 45°C)

32°F to 113°F(0°C to 45°C)

-4°F to 113°F (-20°C to 45°C) (optimal: 68°F to

86°F [20°C to 30°C])

Additional Connections

Supports up to 2 DELTA Max Smart Extra Batteries

(sold separately)

Supported (sold separately)

Smart Extra Battery

Smart Generator

Input Ports

AC Charge

AC Input Voltage

Solar Charger

Car Charger

X-Stream Fast Charge 1600W Max, 15A

100-120V~ 50Hz/60Hz

11-100V 13A, 800W Max

Supports 12V/24V Battery, Default 8A

Max Device(s) Power Supported by X-Boost

USB-A (x2)

USB-A Fast Charge (x2)

USB-C (x2)

Car Charger

DC5521 Output (x2)

2800W

5V 2.4A 12W Max, per port

5V 2.4A 9V 2A 12V 1.5A 18W Max, per port

5/9/12/15/20V 5A 100W Max, per port

12.6V 10A, 126W Max

12.6V 3A, per port

General Info

Output Ports

Net Weight

Dimensions

Capacity

Wi-Fi

Approximately 48lbs

19.6x9.5x12in

1612Wh 50.4V

Supported

Battery Info

Cell Chemistry

Cycle Life

NCM

500 cycles to 80%+ capacity

* Car charger shares power with the DC5521 output port, offering a maximum output of 126W.

AC (x6) Pure Sine Wave, 2000W total (surge 5000W),

120V~ 60Hz

Environmental Operating Temperature

Optimal Operating Temperature

Discharge Temperature

Charge Temperature

Storage Temperature

* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.

68°F to 86°F(20°C to 30°C)

-4°F to 113°F (-20°C to 45°C)

32°F to 113°F(0°C to 45°C)

-4°F to 113°F (-20°C to 45°C) (optimal: 68°F to

86°F [20°C to 30°C])

Protection

Over Voltage Protection, Overload Protection, Over

Temperature Protection, Short Circuit Protection,

Low Temperature Protection, Low Voltage Protection,

Overcurrent Protection

1.2 Specifications of DELTA Max (1600)

2. Safety Instructions

2.1 Usage

1. Do not use the product near a heat source, such as a fire source or a heating furnace.

2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the

product in rain or humid environments.

3. Do not use the product in an environment with strong static electricity/magnetic fields.

4. Do not disassemble the product in any way or pierce the product with sharp objects.

5. Avoid using wires or other metal objects that may result in a short circuit.

6. Do not use unofficial components or accessories. If you need to replace any components or

accessories, please visit official EcoFlow channels to check relevant information.

7. When using the product, please strictly follow the operating environment temperature specified in

this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature

is too low, the product performance may be severely reduced, or the product may cease to work.

8. Do not stack any heavy objects on the product.

9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.

10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external

impact, turn off the power supply immediately and stop using the product. Ensure the product is

well fastened during transportation to avoid vibrations and impacts.

11. If you accidentally drop the product into water during use, please place it in a safe open area, and

stay away from it until it is completely dry. The dried product should not be used again, and should

be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend

that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry

powder, and finally a carbon dioxide fire extinguisher.

12. Use a dry cloth to clean off dirt on the product ports.

13. Rest the product on a flat surface to avoid damages caused by the product falling over. If the

product is overturned and severely damaged, turn it off immediately, place the battery in an open

area, keep it away from combustible matter and people, and dispose of it in accordance with local

laws and regulations.

14. Ensure that the product is kept out of reach of children and pets.

15. Store the product in a dry and ventilated place.

16. It is recommended to use moisture barrier bags in wet environments (for example, places by the

sea or waterways) to prevent the product from getting soaked. If water is found inside the product,

it must not be used or turned on again. Please take anti-eletric shock measures before touching

the product. Following this, place the product in a safe, waterproof and open area. Once complete

contact EcoFlow Customer Service immediately.

2.2 Disposal Guide

1. If conditions permit, make sure that the battery is fully discharged before disposing it in a designated

battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is

strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws

and regulations on battery recycling and disposal.

2. If the battery cannot be fully discharged due to a product failure, please do not dispose of the

battery directly in the battery recycling box. In such case, you should contact a professional battery

recycling company for further processing.

3. Please dispose of over-discharged batteries that cannot be recharged.

17. This product is not recommended for powering medical emergency equipment related to personal

safety, including but not limited to medical grade ventilators (hospital version CPAP: Continuous

Positive Airway Pressure), artificial lungs (ECMO, Extracorporeal Membrane Please follow your

doctor's instructions and consult with the manufacturer for restrictions on the use of the equipment.

If used for general medical equipment, please be sure to monitor the power status to ensure that

the power does not run out.

18. When in use, power supply products will generate electromagnetic fields, which are likely to affect

the normal operation of medical implants or personal medical equipment such as pacemakers,

cochlear implants, hearing aids, defibrillators etc. If these types of medical equipment are being

used, please contact the manufacturer to inquire about any restrictions on the use of such

equipment. These measure are fundamental to ensure a safe distance between the medical implants

(for example, pacemakers, cochlear implants, hearing aids, defibrillators etc.) and this product while

in use.

19.When the power supply is connected in normal mode to a refrigerator, power fluctuations may

cause the power supply to automatically shut down. When connecting the power supply to a

refrigerator that stores medicine, vaccines or other valuable items, it is recommended to set the AC

output to "Always on" in the app. This helps support a continuous power supply and ensures a safe

and efficent power consumption state.

LCD Screen

Solar/Car Charging

Input Port

AC Output Sockets

AC Power Button

Car Outlet

DC5521 Output Port

Extra Battery Port 1

IOT Button

USB-A Output Port USB-A Fast Charge Output

Port

X-Stream AC Charging

Input Port

USB-C 100W Output Port

USB Power Button

Overload Protection

Switch

12V DC Power Button

Extra Battery Port 2

Main Power Button

3.1 Product Details

Ventilation Fan

3. Getting Started

AC Charge Speed Switch

3.2 LCD Screen

3.3 General Product Usage

Short Press to Turn On Long Press to Turn Off

Remaining Charge/

Discharge Time

Overload Warning

Fan Indicator

Low Temperature Warning

High Temperature Warning

Remaining Battery Percentage

Battery Failure Warning

Battery Level Indicator

Extra Battery Indicator

AC Output Wi-Fi Status

12V DC Output Indicator

State of Charge

USB-A Output

USB-C Output

Output Power

Input Power

Battery Level Indicator: The indicator will repeatedly fill while charging. If product is at 0% charge, the

indicator will flash to warn you.

Wi-Fi Status: After pressing the IOT button for 3 seconds, the Wi-Fi status will flash on the LCD screen

which indicates that the product is ready for pairing. There're two ways to connect the product with

the App, either directly connect to the product's hotspot or using the Internet. If the App is successfully

connected to the product's hotspot, the icon will keep flashing; if it is successfully connected to the

Internet, the icon will stay on.

* See Section 5 for more troubleshooting steps.

Short press the Main Power Button to turn on the product; the LCD Screen will light up and the

battery level indicator icon will display.

Product On, Product Off, LCD Screen On

The product enters sleep mode after 5 minutes of idle operation; the LCD Screen will automatically

turn off. When the product senses any load change or operations, the LCD Screen will automatically

light up. To turn the LCD Screen on or off, please short press the Main Power Button.

To power off the product, press and hold the Main Power Button.

The default product standby time is 2 hours. With other Power Buttons turned off and no other load

access for 2 hours, the product will automatically shut down. The standby time can be set on the App.

With the Main Power Button turned on, short press the

USB Power Button to use the USB Output Port. Short

press the USB Power Button again to turn it off.

With the USB Power Button on, the product will not

automatically shut down.

With the Main Power Button turned on, short press the

12V DC Power Button to use the 12V DC Output port.

Short press the 12V DC Power Button again to turn it off.

With the 12V DC Power Button on, the product will not

automatically shut down.

USB Output Port

12V DC Output Port

With the Main Power Button turned on, short press the

AC Power Button to use the AC Output ports. Short press

the AC Power Button again to turn it off.

The default standby time of the AC Output port is 12 hours.

Without any load access for 12 hours, the AC Power will

automatically turn off.

Please turn off AC power button when not in use to save

power consumption.

AC Output Port

Short Press

12V DC Power Button

Short Press

AC Power Button

Short Press

USB Power Button

EcoFlow App

<2 hrs Full Charge

3.4 AC Charging

AC Charging

Cable

Customized Charging Power Rate Range

200W to maximum Input Power

(Default: 400W)

X-Stream Fast Charging

Maximum Charging Mode

EcoFlow’s X-Stream fast charge technology is specifically designed for AC charging. You can control

the charging power through the AC Charge Speed Switch. When set to the top, you will have the

maximum charging speed. When set to the bottom it'll be at your custom speed, which is 400W by

default, customizable in the EcoFlow App. In case of unusual situations where the AC input current

remains higher than 20A, the X-Stream charging input port will initiate a self-protection function,

and the Overload Protection Switch on the product will automatically pop up. After confirming that

there is no product failure, you can press the Overload Protection Switch to resume charging.

The charging power can be adjusted through the AC Charge Speed Switch on the back of the

product. You can set the charging power range in the EcoFlow App.

Please use EcoFlow AC charging Cable for fast charging. AC Charging Cable should directly plug into

15A(or above) wall outlet. EcoFlow takes no responsibilities for any consequences caused by failures to

follow instructions, including but not limited to charging with AC charging Cable.

Users can connect solar panels in series as shown in the figure to recharge the product.

MC4

When using an EcoFlow solar panel to charge the product, please follow the instructions that come

with the solar panel.

Before connecting the solar panel, please ensure that the solar panel’s output voltage is with in 100V

to avoid product damages.

3.5 Solar Charging

3.6 Car Charging

Solar Charging Cable

Car Charging Cable

Users can recharge the product through the Car Charging Input Port. It supports 12V/24V car

chargers and an 8A default charging current.

Please charge using the car charger after you’ve started the car to avoid failure to start due to

insufficient car battery. In addition, please make sure that Car Charging Input Port and the Car

Charging Cable are in good condition. EcoFlow takes no responsibilities for any losses or damages

caused by failures to follow instructions.

*Solar charging cable (MC4-XT60 adapter cable) is supplied separately.

The product can be connected with up to two Smart Extra Batteries at

the same time to meet higher capacity needs. Please refer to the user

manuals of DELTA Max Smart Extra Battery and Smart Generator for

detailed instructions.

Extra Battery, please follow the instructions below:

1. Before connecting the product to a Smart Extra Battery, please make

sure that both the product and the Smart Extra Battery are turned off.

2. After connecting the product to a Smart Extra Battery, please make sure

that both of their LCD screens display an extra battery icon before using it.

3. Do not directly connect or remove the Smart Extra Battery during

charging and discharging processes. If you need to connect or remove it

midway, please turn off the product first.

4. Do not touch the metal terminals of the Smart Extra Battery connector

with your hands or other objects. If foreign objects adhere to the metal

terminals, please gently wipe them with a dry cloth.

To avoid operation failure due to overload protection, the X-Boost feature will be automatically

enabled when the total output exceeds the rated output power, which enables the product to

power high wattage appliances at the rated output power.

X-Boost Tips:

1. X-Boost is enabled by default; you can enable or disable it in the EcoFlow App.

2. X-Boost is not available when the AC output is turned on in a recharging state (in bypass mode)

and when X-Boost is disabled.

3. X-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with strict

voltage requirements. Appliances with voltage protection (such as precise instruments) are not

supported. X-Boost mode is more suitable for heating devices. Please conduct your own tests with

your devices with X-Boost enabled.

3.7 Using Smart Extra Battery

3.8 APP

3.9 X-Boost

The EcoFlow App gives users the ability to control and monitor EcoFlow power

stations remotely.

Read the EcoFlow App user guide and access the download link here:

https://ecoflow.com/pages/ecoflow-app

By using EcoFlow Products, Applications and Services, you consent to the

EcoFlow Term of Use and Privacy Policy, which you can access via the "About"

section of the "User" page on the EcoFlow App or on the official EcoFlow

website at https://ecoflow.com/pages/terms-of-use and https://ecoflow.com/

pages/privacy-policy

1. What battery does the product use?

It uses high-quality lithium-ion battery.

2. What devices can the product’s AC output port power?

With high rated power and peak power, the product’s AC output port can power most household

appliances. Before you use it, we recommend that you confirm the power of the appliances first

and ensure the power sum of all loaded appliances is lower than the rated power.

3. How long can the product charge my devices?

The charging time is shown on the product’s LCD Screen, which can be used to estimate the

charging time of most appliances with stable power usage.

4. How can I know if the product is charging?

When it’s charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the

charging indicator icon begins to rotate with the remaining battery percentage and the input

power shown on the right of the circle.

5. How to clean the product?

Please gently wipe it with a dry, soft, clean cloth or paper towel.

6. How to store the product?

Before storing, please turn off the product first, and then store it in a dry, ventilated place at room

temperature. Do not place it near water sources. For long-term storage, please discharge the

battery to 30% and recharge it to 60% every three months to extend its battery life.

7. Can I bring the product on a plane?

No.

4. FAQS

The product supports EPS. When you connect the grid power to the AC Input Port of the product

through an AC Charging cable, you can power electrical devices through the AC Output Sockets (AC

power will come from the grid and not the power station in this situation). In case of a sudden blackout,

the product can automatically switch to the battery powered supply mode within 30ms. As a basic

UPS function, this function does not support 0ms switching. Please do not connect the product to

any device that requires 0ms UPS, such as data servers and workstations. Please test and confirm

the compatibility before using the product. We recommend that you only charge one device at a

time and avoid using multiple ones at the same time to avoid overload protection. EcoFlow takes no

responsibilities for any device failures or data losses caused by failures to follow instructions.

3.10 Emergency Power Supply (EPS)

5. Troubleshooting

If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a

restart, please stop using it immediately (do not try to charge or discharge).

If you require any other assitance, please contact EcoFlow Customer Service.

Indicator Problem

Resume normal operation by

removing the electrical device

connected to the USB-A port.

Resume normal operation by

removing the electrical device

connected to the USB-C port.

After the product cools down,

it will resume normal operation

automatically.

Charging can be resumed

automatically after the battery cools

down.

The power supply can be resumed

automatically after the battery cools

down.

Charging can be resumed

automatically after battery

temperature rises above 41°F(5℃).

The power supply can be resumed

automatically after the battery

temperature rises above 10°F(-12℃).

Please confirm whether the fan inlet

and outlet are blocked, if not, normal

operation will be resumed automatically

after the product temperature drops.

Normal operation will be resumed

automatically after the product is

used at optimum environmental

temperatures.

Please check if the fan is blocked by

foreign materials.

After the product cools down,

it will resume normal operation

automatically.

Contact EcoFlow Customer Service

Normal operation will be resumed

automatically after you remove the

overloaded device and restart the

product.

Electrical appliances should be used

within rated power.

(Refer to X-Boost instructions to get

more details about power limitations).

Solution

The product will resume normal

operation automatically after you

remove the device connected to the car

charger.

USB-A Overload

Protection

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icon Stays On

USB-C Overload

Protection

USB-C High

Temperature Protection

High Temperature

Charge Protection

High Temperature

Discharge Protection

Low Temperature

Charge Protection

Low Temperature

Discharge Protection

AC Output

Overload Protection

AC High

Temperature Protection

AC Low

Temperature Protection

Fan Blockage

Car Charger

Overload Protection

Car Charger High

Temperature Protection

Battery Failure

Icon Flashes

6. What’s In the Box

7. Storage & Maintenance

DELTA Max DC5521 to DC5525

Cable

Car Charging CableAC Charging Cable

User Manual &

Warranty Card

1. Please use or store the product in an environment temperature between 68°F to 86°F

（20°C

to 30°C）

, away from water, heat, and other metal objects.

2. For long-term storage, please discharge the battery to 30% and recharge it to 60% every three

months.

3. For safety, please do not store the product in an environment temperature higher than 113°F

（45°C）

or lower than 14°F

（-10°C）

for a long time.

4. If the remaining battery is less than 1% after you finish using the product, please recharge it to

60% before storing. If the product is left idle for a long time with severely low battery, irreversible

damages may be caused to the battery cell and the product service life will be shortened.

5. If the product has been idle for too long and the battery is severely low, it will enter a deep sleep

protection mode. In such case, please charge the product before using it again.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

Warning: Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

8. Fcc Statement

La page charge ...

EcoFlow DELTA Max 1600 Manuel utilisateur

Marque: EcoFlow

Modèle: DELTA Max 1600

Taper: Manuel utilisateur

Ce manuel convient également à

DELTA Max 2000 Portable Power Station

Télécharger le PDF

rapport

dans d''autres langues

English: EcoFlow DELTA Max 1600 User manual

EcoFlow DELTA Max 1600 Manuel utilisateur

Ce manuel convient également à

EcoFlow DELTA Max 1600 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents