Husqvarna 220iL String Trimmer Manuel utilisateur

Marque: Husqvarna

Modèle: 220iL String Trimmer

Catégorie: Coupe-herbe

Taper: Manuel utilisateur

220iL

EN Operator's manual 2-20

ES-MX Manual de usuario 21-40

FR-CA Manuel d’utilisation 41-60

Contents

Introduction..................................................................... 2

Safety..............................................................................4

Assembly...................................................................... 11

Operation...................................................................... 12

Maintenance................................................................. 15

Troubleshooting............................................................ 17

Transportation, storage and disposal........................... 18

Technical data.............................................................. 19

Accessories.................................................................. 20

Introduction

Product description

Husqvarna 220iL is a battery grass trimmer with an

electrical motor.

Work is constantly in progress to increase your safety

and efficiency during operation. Speak to your servicing

dealer for more information.

Intended use

The product is used with a trimmer head to cut grass.

Do not use the product for other tasks than grass

trimming and grass clearing.

Note: National regulations can set limit to the

operation of the product.

Product overview

13 1514

1. Trimmer head

2. Cutting attachment guard

3. Shaft

4. Shaft coupling

5. Loop handle

6. Handle adjustment

7. Power trigger lockout

8. Power trigger

9. Battery charger

10. Power on and warning indicator (error LED)

11. Battery

12. Battery release buttons

21752 - 003 - 26.04.2022

13. Battery status

14. Warning indicator (error LED)

15. Battery indicator button

16. Keypad

17. Direction of rotation button, clockwise

18. Direction of rotation button, counterclockwise

19. Power boost button

20. Power button

21. Operator's manual

Symbols on the product

WARNING! Risk of serious injury or

death to the operator or others. Be

careful and use the product correctly.

Read the operator's manual carefully

and understand the instructions before

operation of the product.

Use approved eye protection.

Maximum speed of the output shaft.

Keep a minimum distance of 15 m to

persons and animals during operation of

the product.

Use approved protective boots and

gloves. Wear long sleeves and pants.

Keep hair above shoulders.

The product can cause objects to eject,

which can cause injury.

Only use an approved trimmer head,

spool and recommended trimmer line. Do

not use blades.

The arrows show the limit for the handle

position.

Keep the product away from water and

rain.

Direct current.

The product or package of the product

is not domestic waste. Recycle it at

a recycling station for electrical and

electronic equipment.

yyyywwxxxx The rating plate shows the serial

number. yyyy is the production year,

ww is the production week and xxxx

is the sequential number.

Symbol on the battery charger

Use and keep the battery charger indoors

only.

California Proposition 65

Manufacturer

Husqvarna AB

Husqvarna Professional Products, Inc 9335 Harris

Corners Pkwy, Charlotte, NC 28269, USA

Product liability

As referred to in the product liability laws, we are not

liable for damages that our product causes if:

• the product is incorrectly repaired.

• the product is repaired with parts that are not

from the manufacturer or not approved by the

manufacturer.

• the product has an accessory that is not from the

manufacturer or not approved by the manufacturer.

• the product is not repaired at an approved service

center or by an approved authority.

1752 - 003 - 26.04.2022 3

Safety

Safety definitions

Warnings, cautions and notes are used to point out

specially important parts of the manual.

WARNING: Used if there is a risk of

injury or death for the operator or bystanders

if the instructions in the manual are not

obeyed.

CAUTION: Used if there is a risk of

damage to the product, other materials or

the adjacent area if the instructions in the

manual are not obeyed.

Note: Used to give more information that is necessary

in a given situation.

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING: Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

Read all instructions

WARNING: When using electric

gardening appliances, basic safety

precautions should always be followed to

reduce the risk of fire, electric shock, and

personal injury, including the following:

General power tool safety warnings

WARNING: Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

Note: Save all warnings and instructions for future

reference. The term "power tool" in the warnings refers

to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

• Avoid dangerous environments. Do not use the

appliance in damp or wet locations.

• Do not use in rain.

• Keep children away. All people and pets should be

kept at a distance from the work area.

• Dress properly. Do not wear loose clothing or

jewelry. They can be caught in moving parts. Wear

protective clothing. The use of work gloves, long

pants, a long sleeved shirt and safety footwear

is recommended when working outdoors. Wear

protective hair covering to contain long hair.

• Use safety glasses. Always use a face or dust mask

if the area in which you are working is dusty.

• Use the right appliance. Do not use the appliance for

any job except that for which it is intended.

• Do not force the appliance. It will do the job better

and with less likelihood of a risk of injury at the rate

for which it was designed.

• Do not overreach. Keep proper footing and balance

at all times.

• Stay alert. Use common sense. Do not operate the

appliance when you are tired or under the influence

of drugs, alcohol or medication.

• Store an idle appliance indoors. When not in use, the

appliance should be stored indoors in a dry place out

of reach of children.

• Maintain the appliance with care. Follow instructions

for lubricating and changing accessories. Keep the

handles dry, clean, and free from oil and grease.

• Check for damaged parts. Before using the

appliance, make sure the safety guards are intact.

Never use a tool without its safety guard. Check the

alignment of the moving parts, and check for binding

of the moving parts.

• Check for broken or defective parts that can affect

the safe operation of your tool. A guard or other

part that is damaged should be properly repaired

or replaced by an authorized service center unless

indicated elsewhere in the manual.

• Prevent unintentional starting. Ensure the switch

is in the off position before connecting to battery

pack, picking up or carrying the appliance. Carrying

the appliance with your ﬁnger on the switch or

energizing an appliance that has the switch on

invites accidents.

• Disconnect the battery pack from the appliance

before making any adjustments, changing

accessories, or storing the appliance. Such

preventive safety measures reduce the risk of

starting the appliance accidentally.

• Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

• Use the appliance only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

41752 - 003 - 26.04.2022

• When the battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects, that

can make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

• Under abusive conditions, liquid may be ejected from

the battery. Avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

• Do not use a battery pack or appliance that

is damaged or modified. Damaged or modified

batteries may exhibit unpredictable behavior

resulting in fire, explosion or risk of injury.

• Do not expose a battery pack or appliance to

fire or excessive temperature. Exposure to fire or

temperature above 266 °F (130 °C) may cause

explosion.

• Follow all charging instructions and do not charge

the battery pack or appliance outside of the

temperature range specified in the instructions.

Charging improperly or at temperatures outside of

the specified range may damage the battery and

increase the risk of fire.

• Have servicing performed by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the product is

maintained.

• Do not modify or attempt to repair the appliance or

the battery pack (as applicable) except as indicated

in the instructions for use and care.

Check before starting

• Always remove the battery to prevent the product

being started by accident. Always remove the battery

before any maintenance on the product.

• Before using the product and after any impact,

check for signs of wear or damage and repair as

necessary.

• Inspect the working area. Remove all loose objects,

such as stones, broken glass, nails, steel wire, string

etc. that could be thrown out or become wrapped

around the cutter or cutter guard.

• Check the motor for dirt and cracks. Clean off grass

and leaves from the motor using a brush. Gloves

should be worn when necessary.

• Check that the trimmer head is completely attached

to the trimmer.

• Check that the product is in perfect working order.

Check that all nuts and screws are tight.

• Check that the trimmer head and trimmer guard

are not damaged or cracked. Replace the trimmer

head or trimmer guard if they have been exposed

to impact or are cracked. Always use the

recommended guard for the cutting attachment you

are using. See chapter on Technical data.

• The product operator must ensure that no people or

animals come closer than 15 meters while working.

When several operators are working in the same

area the safety distance should be at least 15

meters.

• Carry out an overall inspection of the product before

use. See the maintenance schedule.

• National or local regulations may regulate the use.

Comply to given regulations.

Personal safety

• The cutting tool does not stop immediately after the

product is turned off.

• The product is only designed for trimming and

edging.

• Keep bystanders away.

•Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result

in serious personal injury.

• This appliance is not intended for use by person

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety. Children should

be supervised to ensure that they do not play with

the appliance.

• Never allow children or other persons not trained in

the use of the product and/or the battery to use or

service it. Local laws may regulate the age of the

user.

• Store the equipment in a lockable area so that it is

out of reach of children and unauthorized persons.

• Keep hands and feet away from the cutting area

at all times and especially when switching on the

motor.

•Dress properly. Do not wear loose clothing or

jewelry. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewelry or long

hair can be caught in moving parts.

• Wear personal protective equipment. See

instructions under the "Personal protective

equipment" heading.

• Always use face or dust mask if operation is dusty.

• Turn off the product when it has to be moved.

Always remove the battery when passing the

machine to another person.

• Keep in mind that it is you, the operator that is

responsible for not exposing people or their property

to accidents or hazards.

• The transport guard must always be used for storage

and transport.

Power tool use and care

• The only accessories you can operate with this

product are the cutting attachments we recommend

in the technical data chapter.

1752 - 003 - 26.04.2022 5

• Never use a product that has been modified in any

way from its original specification. Never use the

product near explosive or flammable materials.

• Never use a product that is faulty. Carry out the

safety checks, maintenance and service instructions

described in this manual. Some maintenance and

service measures must be carried out by trained

and qualified specialists. See instructions under the

Maintenance heading.

• Only use original spare parts.

• Always ensure that ventilation openings are kept

clear of debris.

• Keep handles dry, clean and free from oil and

grease.

• All covers, guards and handles must be fitted before

starting.

• Only use the machine in daylight or in other well-lit

conditions.

• Do not overreach. Keep proper footing and balance

at all times.

• Don't force the product. It will do the job better and

with less likelihood of injury at the rate for which it

was designed.

• Working in bad weather is tiring and often brings

added risk. It is not recommended to use the product

in very bad weather, for instance, in dense fog,

in heavy rain, strong winds, intense cold, risk of

lightning.

• If the product starts vibrating abnormally, stop the

product and remove the battery.

• Avoid Unintentional Starting – Don’t carry appliance

with finger on switch.

• Store Idle Appliances Indoors – When not in use,

appliances should be stored indoors

• Walk, never run.

Always use common sense

It is not possible to cover every conceivable situation

you can face. Always exercise care and use your

common sense. Avoid all situations which you consider

to be beyond your capability. If you still feel

uncertain about operating procedures after reading

these instructions, you should consult an expert before

continuing.

WARNING: Never allow children to use

or be in the vicinity of the machine. Since

the machine is easy to start, children may be

able to start it if they are not kept under full

surveillance. This can mean a risk of serious

personal injury. Therefore disconnect the

battery when the machine is not under close

supervision.

General safety instructions

WARNING: Read the warning

instructions that follow before you use the

product.

• Remove the battery to prevent the product from

being started by accident.

• This product is a dangerous tool if you are not

careful or if you use the product incorrectly. This

product can cause serious injury or death to the

operator or others.

• Do not use the product if it is changed from its initial

specification. Do not change a part of the product

without approval from the manufacturer. Only use

parts that are approved by the manufacturer.

Injury or death is a possible result of incorrect

maintenance.

• Do a check of the product before use. See,

Safety devices on the product on page 8

and

Maintenance on page 15

. Do not use a defective

product. Do the safety checks, maintenance and

service instructions described in this manual.

• Children should be supervised to ensure that they

do not play with the product. Never allow children or

other persons not trained in the use of the product

and/or the battery to use or service it. Local laws

may regulate the age of the user.

• Keep the product in a locked area to prevent access

for children or persons that are not approved.

• Store the product out of reach of children.

• Your warranty may not cover damage or liability

caused by the use of non-authorized accessories or

replacement parts.

• Under no circumstances may the design of the

product be modified without the permission of the

manufacturer. Always use original accessories. Non-

authorized modifications and/or accessories can

result in serious personal injury or the death of the

operator and others.

Note: National or Local laws can regulate the use.

Comply to given regulations.

Safety instructions for operation

WARNING: Read the warning

instructions that follow before you use the

product.

• If you encounter a situation where you are uncertain

how to proceed you should ask an expert. Contact

your dealer or your service workshop. Avoid all

usage which you consider to be beyond your

capability.

• Never use the product if you are fatigued, while

under the influence of alcohol or drugs, medication

61752 - 003 - 26.04.2022

or anything that could affect your vision, alertness,

coordination or judgment.

• Faulty cutting attachment can increase the risk of

accidents.

• Do not allow children to use or be in the vicinity

of the product. Since the product is easy to start,

children may be able to start it if they are not kept

under full surveillance. This can mean a risk of

serious personal injury. Disconnect the battery when

the product is not under close supervision.

• Ensure that no people or animals come closer than

15 meters while you work. When several operators

are working in the same area the safety distance

should be at least 15 meters. Otherwise there is

a risk of serious personal injury. Stop the product

immediately if anyone approaches. Never swing the

product around without first checking behind you to

make sure that no one is within the safety zone.

• Ensure that people, animals or other things can

not affect your control of the product or that they

do not come in contact with the cutting attachment

or loose objects that are thrown out by the cutting

attachment. However, do not use the product unless

you are able to call for help in the event of an

accident.

• Always inspect the working area. Remove all loose

objects such as stones, broken glass, nails, steel

wire, string, etc., that could be thrown out or become

wrapped around the cutting attachment.

• Make sure that you can move and stand safely.

Check the area around you for possible obstacles

(roots, rocks, branches, ditches, etcetera) in case

you have to move suddenly. Take great care when

you work on sloping ground.

• Keep a good balance and a firm foothold at all times.

Do not overreach.

• Deactivate the product before you move to another

area.

• Never put the product down unless you have

deactivated it and removed the battery. Do not leave

the product unsupervised when it is switched on.

• Remove the battery before you pass the product to

another person.

• Make sure that no clothes or parts of the body

come in contact with the cutting attachment when

the product is activated. Keep the product below

waist level.

• If anything jams in the cutting attachment while

you operate the product, stop and deactivate the

product. Make sure that the cutting attachment stops

completely. Remove the battery before you clean,

inspect or repair the product and/or the cutting

equipment. There is a risk of burns as the gear

housing can become very hot. Use gloves when

working with the trimmer head.

• Keep your hands and feet away from the cutting

attachment until it has stopped completely when the

product is deactivated.

• Watch out for stumps of branches that can be thrown

out when you cut. Do not cut to close to the ground

where stones and other objects can be thrown out.

• Watch out for thrown objects. Always wear

approved eye protection. Never lean over the cutting

attachment guard. Stones, rubbish, etc., can be

thrown up into the eyes which can cause blindness

or serious injury.

• Listen out for warning signals or shouts when

you wear hearing protection. Always remove your

hearing protection as soon as the product stops.

• Never work from a ladder, stool or any other raised

position that is not fully secured.

• If any unwanted vibrations occur, tap out new line to

give the line the correct length to stop the vibrations.

• Overexposure to vibration can lead to circulatory

damage or nerve damage in persons who have

poor circulation. Speak to your physician if you

experience symptoms of overexposure to vibration.

Such symptoms include numbness, loss of feeling,

tingling, pricking, pain, loss of strength, changes

in skin color or condition. These symptoms usually

show in the fingers, hands or wrists.

• Always hold the product with both hands. Hold the

product on the right side of your body.

• Do not remove the cut material, or let other persons

remove cut material, while the product is on or

the cutting equipment rotates, as this can result in

serious injury.

• Always stop the product, remove the battery and

make sure that the cutting equipment does not rotate

before you remove unwanted material that is wound

around the shaft or caught between the guard and

the cutting attachment.

• This product produces an electromagnetic field

during operation. This field may under some

circumstances interfere with active or passive

medical implants. To reduce the risk of serious or

fatal injury, we recommend persons with medical

implants to consult their physician and the medical

implant manufacturer before operating this machine.

• Release the power trigger after each working

operation to save battery power.

• Don’t force the product. It will do the job better and

with less likelihood of a risk of injury at the rate for

which it was designed.

• If any foreign object is hit or if vibrations occur

stop the product immediately. Remove the battery

from the product and check that the product is not

damaged.

Personal protective equipment

WARNING: Read the warning

instructions that follow before you use the

product.

• Always use approved personal protective equipment

when you use the product. Personal protective

equipment cannot fully prevent injury but it

1752 - 003 - 26.04.2022 7

decreases the degree of injury if an accident does

occur. Let your dealer help you select the right

equipment.

• Use a protective helmet where there is a risk of

falling objects.

• Long term exposure to noise can result in damaged

hearing. In general, battery powered products

are relatively quiet but damage can result from

a combination of noise level and long usage.

recommends that operators use hearing protectors

when using products for a longer coherent time of a

day. Continual and regular users should have their

hearing checked regularly.

WARNING: Hearing protectors limit

the ability to hear sounds and warning

signals.

• Use approved eye protection. If you use a visor,

you must also use approved protective goggles.

Approved protective goggles must comply with the

ANSI Z87.1 standard in the USAs or EN 166 in EU

countries.

• Use a visor for face protection. A visor is not enough

for protection of the eyes.

• Use gloves when necessary, for example when you

attach, examine or clean the cutting equipment.

• Use sturdy non-slip boots.

• Use clothing made of a strong fabric. Always use

heavy, long pants and long sleeves. Do not use

loose clothing that can catch on twigs and branches.

Do not wear jewelry, short pants, sandals or go with

bare feet. Put your hair up safely above shoulder

level.

• Keep first aid equipment close at hand.

Cutting attachment

WARNING: Remove the battery and

make sure the cutting attachment stops

completely before you work on any part of

the cutting attachment.

WARNING: Only use the cutting

attachment with the guards we recommend,

see

Accessories on page 20

Trimmer head

• Always use the correct trimmer head, cutting

attachments and always use the recommended

trimmer line. Refer to

Accessories on page 20

and

the assembly in the end of the Manual.

• Make sure that the cutter on the trimmer guard is not

damaged.

• Make sure that the trimmer line is wound tightly

and equally around the drum to prevent unusual

vibrations from the product. Different cord lengths

can result in vibrations that are not necessary. Tap

the trimmer head to get correct length on the cord.

Safety devices on the product

WARNING: Read the warning

instructions that follow before you use the

product.

In this section the product’s safety features, its purpose

and how checks and maintenance should be carried

out to ensure that it operates correctly. See instructions

under the heading

Product overview on page 2

to find

where these parts are located on your product.

The life span of the product can be reduced and the risk

of accidents can increase if product maintenance is not

carried out correctly and if service and/or repairs are not

carried out professionally. If you need further information

please contact your nearest servicing dealer.

WARNING: Never use a product with

defective safety components. The product's

safety equipment must be inspected and

maintained as described in this section.

If your product fails any of these checks,

contact your service agent to get it repaired.

CAUTION: All servicing and repair work

on the machine requires special training.

This is especially true of the machine′s

safety equipment. If your machine fails

any of the checks described below you

must contact your service agent. When

you buy any of our products we guarantee

the availability of professional repairs and

service. If the retailer who sells your

81752 - 003 - 26.04.2022

machine is not a servicing dealer, ask him

for the address of your nearest service

agent.

To do a check of the keypad

• Push and hold the power button (A).

a) The product is on when the LED (B) is on.

b) The product is off when the LED (B) is off.

To do a check of the power trigger lockout

The power trigger lockout prevents accidental start.

When you push the power trigger lockout (A) forward,

it releases the power trigger (B). When you release the

handle, the power trigger and the power trigger lockout

move back to their initial positions.

1. Make sure that the power trigger is locked when the

power trigger lockout is in its initial position.

2. Push the power trigger lockout (A) forward. Make

sure that it moves back to its initial position when

you release it.

3. Make sure that the power trigger and the power

trigger lockout moves freely and that the return

spring works correctly.

4. Start the product. Refer to

To start the product on

page 13

5. Apply full power.

6. Release the power trigger lockout and make sure

that the cutting attachment stops fully.

To do a check of the cutting attachment guard

WARNING: Do not use a cutting

attachment without an approved and

correctly attached cutting attachment guard.

Always use the recommended cutting

attachment guard for the cutting attachment

that you use, see

Accessories on page 20

If an incorrect or faulty cutting attachment

guard is attached this can cause serious

personal injury.

The cutting attachment guard stops objects that ejects in

the direction of the operator. It also prevents injuries that

occur if you touch the cutting attachment.

1. Stop the motor.

1752 - 003 - 26.04.2022 9

2. Do a visual check for damages, for example cracks.

3. Replace the cutting attachment guard if it is

damaged.

Battery safety

WARNING: Read the warning

instructions that follow before you use the

product.

• Only use the BLi22 battery. Refer to

Technical data

on page 19

. The battery is software encrypted.

• Use the BLi22 battery that is rechargeable as a

power supply for the related Husqvarna products

only. To prevent injury, do not use the battery as a

power supply for other devices.

• Risk of electrical shock. Do not connect the battery

terminals to keys, coins, screws or other metal. This

can cause a short circuit of the battery.

• Do not use non-rechargeable batteries.

• Do not put objects into the air slots of the battery.

• Keep the battery away from sunlight, heat or open

flame. The battery can cause burns and/or chemical

burns.

• Keep the battery away from microwaves and high

pressure.

• Do not try to disassemble or break the battery.

• If the battery leaks, do not let the liquid touch your

body or eyes. If you have touched the liquid, clean

the area with a large quantity of water and soap, and

get medical aid. If you get liquid in your eyes, do not

rub but flush with water for a minimum of 15 minutes

and get medical aid.

• Use the battery in temperatures between -10 °C (14

°F) and 40 °C (114 °F).

• Do not clean the battery or the battery charger with

water. Refer to

To clean the product, the battery and

the battery charger on page 16

• Do not use a defective or damaged battery.

• Keep batteries in storage away from metal objects

such as nails, screws or jewelry.

• Keep the battery away from children.

Battery charger safety

WARNING: Read the warning

instructions that follow before you use the

product.

• Risk of electrical shock or short circuit if the safety

instructions are not obeyed.

• Use an approved grounded mains socket that is not

damaged.

• Only use Husqvarna branded chargers.

• Do not try to disassemble the battery charger.

• Do not use a defective or damaged battery charger.

• Do not lift the battery charger by the power cord. To

disconnect the battery charger from a mains socket,

pull out the plug. Do not pull the power cord.

• Keep all cables and extension leads away from

water, oil and sharp edges. Make sure that the cable

is not caught between objects, for example, doors,

fences or equivalent.

• Do not use the battery charger near flammable

materials or materials that can cause corrosion.

Make sure that the battery charger is not covered.

Pull out the plug to the battery charger if there is

smoke or fire.

• Only charge the battery indoors in a location with

good airflow and away from sunlight. Do not charge

the battery outdoors. Do not charge the battery in

wet conditions.

• Only use the battery charger where the temperature

is between 5 °C (41 °F) and 40 °C (104 °F). Use the

charger in an environment which has a good airflow,

dry and free from dust.

• Do not put objects into the cooling slots of the

battery charger.

• Do not connect the battery charger terminals to

metal objects as this can short circuit the battery

charger.

• Use approved mains sockets that are not damaged.

Make sure that the cord of the battery charger is not

damaged. If extension cables are used, make sure

that the extension cables are not damaged.

• Use a residual-current device (RCD) for increased

security. A residual-current device is fitted to protect

operators in case an electrical fault should occur.

Safety instructions for maintenance

WARNING: Read the warning

instructions that follow before you do

maintenance on the product.

• Remove the battery before you do maintenance,

other checks or assemble the product.

• The operator must only do the maintenance and

servicing shown in this operator's manual. Turn to

your servicing dealer for maintenance and servicing

of a larger extension.

• Do not clean the battery or the battery charger with

water. Strong detergent can cause damage to the

plastic.

• If you do not do maintenance, it decreases the

life cycle of the product and increases the risk of

accidents.

10 1752 - 003 - 26.04.2022

• Special training is necessary for all servicing and

repair work, especially for the safety devices on the

product. If not all checks in this operator's manual

are approved after you have done maintenance, turn

to your servicing dealer. We guarantee that there are

professional repairs and servicing available for your

product.

• Only use original spare parts.

• Maintenance, replacement, or repair of the emission

control devices and system may be performed

by any nonroad engine repair establishment or

individual.

SAVE THESE

INSTRUCTIONS

Assembly

Introduction

This section describes how to assemble and adjust the

product.

WARNING: Before you assemble the

product, read the safety chapter and the

assembly instructions.

To assemble the loop handle

1. Attach the loop handle onto the shaft between the

arrows.

2. Move the spacer into the slot of the loop handle.

3. Install the screw and the knob. Do not tighten too

much.

4. Adjust the loop handle to an applicable position.

5. Tighten the knob.

To assemble the two-piece shaft

1. Turn the knob to loosen the shaft coupling.

2. Push in the lock button (A) and push the shaft into

the shaft coupling until the lock button sets in the

hole (B).

Note: If you cannot push the shaft fully into the

shaft coupling, turn shaft to make the internal drive

shafts connect.

1752 - 003 - 26.04.2022 11

3. Tighten the knob fully, before you operate the

product.

To disassemble the two-piece shaft

1. Turn the knob to loosen the shaft coupling.

2. Push and hold the lock button (A). Pull the shafts

apart.

To attach the cutting attachment guard

• Attach the cutting attachment guard (A) to the shaft

Operation

Introduction

WARNING: Read and understand the

safety chapter before you use the product.

Before you operate the product

• Examine the work area to make sure that you know

the type of terrain. Examine the slope of the ground

and if there are obstacles such as stones, branches

and ditches.

• Do a general inspection of the product.

• Do the safety inspections, maintenance and

servicing that are given in this manual.

• Examine the motor for dirt or cracks. Use a brush to

clean the motor from grass and leaves. Use gloves

when it is necessary.

• Examine the trimmer head and cutting attachment

guard for damages or cracks. Replace the trimmer

head and cutting attachment guard if they are hit or if

they have cracks.

• Make sure that all nuts and screws are tight.

• Make sure that all covers, guards, handles and the

cutting equipment are correctly attached and not

damaged before you start the product.

12 1752 - 003 - 26.04.2022

To connect the battery charger

1. Connect the battery charger to the voltage and

frequency that is specified on the rating plate.

2. Put the plug in a grounded socket outlet. The LED

on the battery charger flashes green one time.

Note: The battery does not charge if the battery

temperature is more than 50 °C/122 °F. If the

temperature is more than 50 °C/122 °F, the battery

charger makes the battery become cool before the

battery charges.

To charge the battery

Note: Charge the battery if it is the first time that you

use it. A new battery is only 30% charged.

1. Make sure that the battery is dry.

2. Put the battery in the battery charger.

3. Make sure that the green charging light on the

battery charger comes on. That means that the

battery is connected correctly to the battery charger.

4. When all LEDs on the battery come on, the battery is

fully charged.

5. To disconnect the battery charger from the mains

socket, pull the plug. Do not pull the cable.

6. Remove the battery from the battery charger.

Note: Refer to the battery and battery charger

manuals for more information.

To connect the battery to the product

WARNING: Only use Husqvarna

original batteries with the product.

1. Make sure that the battery is fully charged.

2. Push the battery into the battery holder of the

product. The battery locks into position when you

hear a click.

CAUTION: If the battery does not

move easily into the battery holder, the

battery is not installed correctly. This can

cause damage to the product.

3. Make sure that the battery is installed correctly.

Battery information

Refer to the operator's manual of the battery for

information about how to use the battery.

To start the product

1. Push and hold the power button until the green LED

comes on.

2. Use the power trigger to control the speed.

1752 - 003 - 26.04.2022 13

To operate the product

To trim the grass

• Hold the trimmer head immediately above the

ground at an angle. Do not push the trimmer line

into the grass.

To clear grass

1. Keep the trimmer head above the ground.

2. Tilt the trimmer head.

3. Cut with the end of the trimmer line around objects in

the work area.

CAUTION: Cut grass. Other objects

that are hit by the trimmer line, increases

the wear on the trimmer line.

To cut the grass

1. Make sure that the trimmer line is parallel to the

ground when you cut the grass.

2. Do not push the trimmer head to the ground. This

can cause damage to the product.

3. Move the product from side to side when you cut

grass. Use full speed.

To sweep the grass

The airflow from the rotating trimmer line can be used to

remove cut grass from an area.

1. Hold the trimmer head and the trimmer line parallel

to the ground and above the ground.

2. Apply full throttle.

3. Move the trimmer head from side to side and sweep

the grass.

WARNING: Clean the trimmer head

cover each time you assemble new trimmer

line to prevent unbalance and vibrations in

the handles. Also do a check of the other

parts of the trimmer head and clean it if

necessary.

To extend the trimmer line

• When the trimmer line becomes short during

operation, tap the trimmer head on a hard, flat

surface to extend more trimmer line out. You must

operate the product at full speed to get the best

result.

14 1752 - 003 - 26.04.2022

Power boost function

You can use the standard mode or the power boost

function.

• Standard mode: The product is set to standard mode

when started. Standard mode saves energy and

gives maximum operation time. Standard mode is

applicable for most tasks.

• Power boost function: The power boost function lets

the product operate at high speed. The power boost

function can for example be used in areas with

thicker grass growth than usual.

To start and stop the power boost function

You can start or stop the power boost function while the

product is in operation.

• Push power boost button. The power boost function

is on when the LED is on.

• Push power boost button. The power boost function

is off when the LED is off.

Note: If the power trigger is released during operation,

the product starts in the last set function. If the product

automatically stops, or if the operator pushes the power

button, the product is set to the standard function again

when started.

To change the direction of rotation of the

trimmer head

You can change the direction of rotation at full speed or

at stop position. At start, the trimmer head is set to turn

clockwise.

• Push the left button (A) to set the direction of rotation

to counterclockwise.

A B

• Push the right button (B) to set the direction of

rotation to clockwise. The green LED shows the

direction of rotation that is used.

Note: It is easier to tap out the trimmer line to make it

longer when the trimmer head turns clockwise.

Automatic shutdown function

The product has an automatic shutdown function that

stops the product if the product is not used. The green

LED for start/stop indication goes off and the product

stops after 120 seconds.

To stop the product

1. Release the power trigger or the power trigger

lockout.

2. Push the power button until the green LED is off.

3. Push the release buttons on the battery and pull the

battery out.

Maintenance

Introduction

WARNING: Read and understand the

safety chapter before you do maintenance

on the product.

Maintenance schedule

WARNING: Remove the battery before

you do maintenance.

1752 - 003 - 26.04.2022 15

The following is a list of the maintenance steps that you

must do on the product. See

Introduction on page 15

for

more information.

Maintenance Daily Weekly Monthly

Clean the external parts of the product with a dry cloth. Do not use water. X

Examine that the power button works correctly and is not damaged. X

Make sure that the power trigger and the power trigger lockout function correctly

from a safety point of view. X

Make sure that all controls work and are not damaged. X

Keep the handles dry, clean and free from oil and grease. X

Make sure that the cutting attachment is not damaged. Replace the cutting

attachment if it is damaged. X

Make sure that the cutting attachment guard is not damaged. Replace the cut-

ting attachment guard if it is damaged. X

Make sure that the screws and nuts are tight. X

Make sure that the battery release buttons on the battery works and locks the

battery in the product. X

Examine that the battery charger is not damaged and function correctly. X

Make sure that the battery is not damaged. X

Make sure that the battery is charged. X

Make sure that the battery charger is not damaged. X

Examine all couplings and connections. Make sure they are not damaged and

free from dirt. X

Do a check of the connections between the battery and the product. Do a check

of the connection between the battery and the battery charger. X

To examine the battery and the battery

charger

1. Examine the battery for damages, for example

cracks.

2. Examine the battery charger for damages, for

example cracks.

3. Make sure that the connection cord of the battery

charger is not damaged and that there are no cracks

in it.

To clean the product, the battery and

the battery charger

1. Clean the product with a dry cloth after use.

2. Clean the battery and battery charger with a dry

cloth. Keep the battery guide tracks clean.

3. Make sure that the terminals on the battery and the

battery charger are clean before the battery is put in

the battery charger or the product.

To replace the trimmer line

1. Hold the lower half (A) of the trimmer head stable

with one hand.

2. Use your opposite hand to turn the top half (B) of the

trimmer head clockwise.

16 1752 - 003 - 26.04.2022

3. Continue to turn the top half of the trimmer head until

the triangles (C) align.

4. Remove and discard the remaining trimmer line, if

there is.

5. Cut approximately 5.5 m/18 ft of new trimmer line.

6. Put one end of the trimmer line into one of the holes.

7. Push the trimmer line through the trimmer head and

through the opposite hole.

X X

8. Pull the trimmer line through the trimmer head until

there is an equal length of trimmer line on each side.

9. Hold the trimmer head lower half stable with one

hand.

10. Use your opposite hand to turn the top half

counterclockwise.

11. Continue to turn the knob until approximately 127

mm/5 in of trimmer line is extended from each hole.

Troubleshooting

Keypad

LED display Possible faults Possible action

Green LED flashing Low battery power. Charge the battery.

Battery

Condition Possible faults Possible procedure

The battery warning LED

flashes.

Temperature deviation, the

battery is too cold or too hot

to use.

Let the battery cool down or move it indoors to warm

it up. When the battery has the correct temperature,

it can be used again. Use the battery in ambient

temperatures between -10 °C (14 °F) and 40 °C (104

°F).

The battery is empty. Charge the battery.

1752 - 003 - 26.04.2022 17

Condition Possible faults Possible procedure

The battery warning LED

comes on.

Permanent battery error. Speak to your dealer.

Battery charger

Condition Possible faults Possible procedure

The charging LED is red. Permanent battery charger

error.

Speak to your dealer.

The charging LED flashes

red. Temperature deviation, the

battery is too cold or too hot

to use or charge.

Let the battery cool down or warm it up. When the

battery has the correct temperature, it can be used

or charged again. Use the battery charger in ambient

temperatures between 5 °C (41 °F) and 40 °C (104

°F).

The charging LED flashes

green.

The charging LED flashes

red.

Faulty battery Speak to your dealer

Transportation, storage and disposal

Transportation and storage

• The supplied Li-ion batteries obey the Dangerous

Goods Legislation requirements.

• Obey the special requirement on package and labels

for commercial transportation, including by third

parties and forwarding agents.

• Speak to a person with special training in dangerous

material before you send the product. Obey all

applicable national regulations.

• Use tape on open contacts when you put the battery

in a package. Put the battery in the package tightly

to prevent movement.

• Remove the battery for storage or transportation.

• Put the battery and the battery charger in a space

that is dry and free from moisture and frost.

• Do not keep the battery in an area where static

electricity can occur. Do not keep the battery in a

metal box.

• Put the battery in storage where the temperature is

between 5°C/41°F and 25°C/77°F and away from

open sunlight.

• Put the battery charger in storage where the

temperature is between 5 °C/41 °F and 45°C/113°F

and away from open sunlight.

• Use the battery charger only when the surrounding

temperature is between 5°C/41°F and 40°C/104°F.

• Charge the battery 30% to 50% before you put it in

storage for long periods.

• Put the battery charger in storage in a space that is

closed and dry.

• Keep the battery away from the battery charger

during storage. Do not let children and other not

approved persons to touch the equipment. Keep the

equipment in a space that you can lock.

• Clean the product and do a full servicing before you

put the product in storage for a long time.

• Use the transportation guard on the product to

prevent injuries or damage on the product during

transportation and storage.

• Attach the product safely during transportation.

18 1752 - 003 - 26.04.2022

Technical data

220iL

Motor

Motor type BLDC (brushless) 40 V

Speed of output shaft, rpm 5000-6000

Cutting width, in./mm 16/406

Weight

Weight without battery, lb/kg 7.7/3.5

Weight with BLi22, lb/kg 10.6/4.8

Water protection level

All weather use No

Approved batteries for the product

Battery BLi22

Type Lithium-ion

Battery capacity, Ah 4.2

Nominal voltage, V 36

Weight, lb/kg 2.9/1.3

Approved battery chargers

Battery charger QC250

Input voltage, V 100-240

Frequency, Hz 50-60

Power, W 250

1752 - 003 - 26.04.2022 19

Accessories

Approved accessories

Approved accessory Type

Trimmer head Trimmer line (Ø 2.0 mm / 0.080 in)

20 1752 - 003 - 26.04.2022

La page charge ...

Husqvarna 220iL String Trimmer Manuel utilisateur

Marque: Husqvarna

Modèle: 220iL String Trimmer

Catégorie: Coupe-herbe

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Husqvarna 220iL String Trimmer User manual
español: Husqvarna 220iL String Trimmer Manual de usuario

Husqvarna 220iL String Trimmer Manuel utilisateur

Husqvarna 220iL String Trimmer Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents