Ascaso BIG DREAM T Manuel utilisateur

Marque: Ascaso

Modèle: BIG DREAM T

Catégorie: Cafetières

Taper: Manuel utilisateur

BIG DREAM T

User Manual

Manual de Usuario

Benutzerhandbuch

Manuel de l’utilisateur

(27)

(51)

(75)

MAN-47 V4 / 2022

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 1MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 1 30/05/2023 13:24:2330/05/2023 13:24:23

Thank you

Recycling your coffee machine

Thank you for purchasing an ascaso product. With it you can get the best espresso

coffee and delicious cappuccinos.

Your coffee machine has been designed and built applying the latest technological

innovations, both in the computer field and engineering, so the result is a high quality

product, safe and reliable.

Coffee makers may contain recyclable materials.

Contact your distributor or your local recycling center.

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 2MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 2 30/05/2023 13:24:2330/05/2023 13:24:23

ENGLISH

Contents

CONFORMITY .........................................................5

SAFETY RULES ........................................................6

1. USE ...............................................................8

2. COMPONENTS IDENTIFICATION ........................................8

3. CHARACTERISTICS OF THE MACHINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4. INSTALLATION .....................................................10

5. ELECTRICAL CONNECTION ..........................................11

6. HYDRAULIC CONNECTION .......................................... 12

7. START-UP ........................................................ 13

8. COFFEE PREPARATION ............................................. 14

9. PROGRAMMING THE DOSE OF COFFEE ............................... 16

10. PREPARATION OF THE CAPPUCCINO ................................ 17

11. PREPARATION OF HOT WATER ...................................... 19

12. DISPLAY OPTIONS ................................................ 20

13. MAINTENANCE AND CLEANING ..................................... 24

14.WARRANTY ...................................................... 25

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 3MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 3 30/05/2023 13:24:2430/05/2023 13:24:24

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 4MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 4 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

Regulations - EC Declaration of Conformity

Ascaso Factory S.L.U

Coneixement 1 Pol. Ind. Gavá Park

08850 Gavá / Barcelona / Spain

As a manufacturer of coffee machines, we hereby declare under its responsibility that

the product to which this Declaration refers (please see label below) in accordance with

the provisions of the specific directives: 98/37/ CE - - Machine directive 73/23 / CEE,

93 / 68 / CEE - Low Voltage Directive 89/336 / CEE, 93/68 / CEE, 92/31/CEE - - EMC

Directive 97/23 / - Pressure Equipment Directive (PED) and conforms to the following

standards: EN 292 -1, EN292-2, EN 60335-1, EN 60335-2-15, EN 55014, EN 61000-3,

EN 61000-4, EN 50141, EN55104 Harmonized EN standards.

This declaration loses its validity if the appliance is modified without the express written

authorization of the manufacturer, or if it has been used in any other way than as

directed by the User Manual and instructions. The technical file has been stored by the

Quality manager at the company’s registered address.

Registered address:

Ascaso Factory S.L.U

Coneixement 1 Pol. Ind. Gavá Park

08850 Gavá / Barcelona / Spain

Date: 01/09/2020

(Quality Manager)

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 5MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 5 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

Safety rules

• Before connecting the machine, check the mains.

• Do not use extension cords, adapters or multiple plugs for your connection.

• Check that there is an earth connection and an efficient electrical safety device.

• Place the machine on a flat, stable surface, inaccessible to children and animals and

away from hot surfaces.

• Use in environments where the temperature is between 5°C (41°F) and 40°C (95°F).

• Access to the service area is restricted to persons with knowledge and practical

experience of the appliance, in particular in regard to health and safety.

• The machine must be connected to a water mains supplying drinking water, softened

to a maximum hardness of 3.5/5 French degrees (60/85 ppm).

• This equipment is to be installed to comply with the applicable federal, state or local

plumbing codes.

• This appliance is not suitable for installation in an area where a water jet could be

used.

• This appliance should be placed in a horizontal position.

• This appliance is only to be installed in locations where its use and maintenance is

restricted to trained personnel.

• This appliance cannot be cleaned with a water jet.

• This equipment is not intended for use outdoors or in an unconditioned environment

where freezing temperatures may occur.

• If the supply cord is damaged, it must be replaced only by the manufacturer or

authorized and technically qualified person.

• The maximum inlet water pressure is 4bar (0.4 MPa). If pressure is greater, install a

pressure reducer.

• The minimum inlet water pressure is 1bar (0.1 MPa).

• This machine is not intended for use in kitchens.

• This appliance may be used by children aged 8 years and over and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge under supervision or provided that they have received instruction

concerning safe use of the appliance and understand the hazards involved.

• Children should not play with the appliance.

• Children should not undertake cleaning or user maintenance without supervision.

• The weighted sound pressure level of the machine is lower than 70dBA.

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 6MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 6 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

• If a stationary appliance is not fitted with a supply cord and a plug, or with other

means for disconnection from the supply mains having a contact separation in all

poles that provide full disconnection under overvoltage category III conditions, the

instructions shall state that means for disconnection must be incorporated in the

fixed wiring in accordance with the wiring rules.

• This appliance is designed to be permanently connected to the water supply.

• Never start a defective appliance or an appliance with a mains cable in poor

condition.

• Do not obstruct the ventilation grilles, in particular, do not cover the hot-cup surface

with cloths or other objects.

• Do not intervene for cleaning or maintenance work with the appliance plugged in.

• Do not unplug the coffee machine by pulling on the power cord.

• Do not allow children or inexperienced persons to handle the device.

• Do not handle the appliance with wet or damp hands or feet.

• Do not immerse the appliance in water.

• Do not leave the packaging material (bags, nails, cardboard) within the reach of

children.

• The packaged machine must be stored in one place, dry and without moisture.

• Avoid placing heavy packages of another type on the packaging.

• Use only accessories and spare parts authorized by the manufacturer.

• In the event of a malfunction or breakdown, switch off the appliance and unplug it

from the mains.

• Do not attempt to repair or intervene directly. Call your technical service.

• An incorrect installation can cause damage to people and objects, for which the

manufacturer cannot be held responsible.

• Failure to respect these warnings may compromise the safety of both the device and

the user.

• Keep this instruction manual for future reference.

• This equipment is to be installed with adequate backflow protection to comply with

aplicable federal, state, and local codes.

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 7MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 7 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

1 - Use

2 - Components identification

The machines have been designed, manufactured and protected to be used as

machines to prepare espresso coffee and hot drinks (tea, cappuccino, chamomile,

etc.); all other use must be considered improper and therefore dangerous.

General switch (0 OFF, I ON)

Buttons groups

Information screens groups

Pressure gauge boiler / pressure pump

Coffee groups

Steam tap control

Steam tube

Hot water switches

Hot water outlet

Tray

Cup-warmer

Adjustable feet

Light, cup-warmer and group-heating switch (0 OFF, I ON)

Display

IMPORTANT!

The manufacturer declines all liability for damages to persons or things due to

improper, erroneous or unreasonable use.

10.

11.

12.

13.

14.

913

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 8MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 8 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

3 - Characteristics of the machine

The machines of the BIG DREAM T series have been designed to prepare espresso and hot

drinks.

The operating principle consists of a volumetric pump inside the machine that feeds the

hot water and steam boiler, in addition to the independent coffee groups. By activating the

controls, the water is sent to the external brewing units in the form of hot water or steam

according to the needs.

The water to be used to prepare the drinks is taken at the moment of the water network,

pressurized by the pump, passing through a pre-heating circuit through the hot water / steam

boiler, and its temperature is finally raised from the temperature from pre-heating to working

by a heat exchanger.

Each one of the spreader groups, as well as the hot water / steam boiler, can present a

different working temperature, as well as different independent configuration parameters to

optimize the machine's performance before the needs of the user.

The machine is formed by a supporting structure in stainless steel to which the mechanical

and electrical components are fixed. Everything is covered with panels of total coverage

made in Baydur© (polymeric material with high isolation features) and stainless steel. The

productive operations are carried out on the front of the machine and the controls, where the

control devices and the coffee brewing groups are located. In the upper part of the machine

there is a surface destined to heat the cups.

BIG DREAM T

2GR 3GR

Voltage 380V 3F / 220-240V 50/60Hz

Power (w) 5500 6500

Steam boiler (w) 3500 3500

Coffee group (w) 2x1000 3x1000

Steam boiler

Max. Pressure (mpa) 0,27 0,27

Working pressure (mpa) 0,2 0,2

Volume (l) 8,5 8,5

Size (mm) 930x554x593 1189x554x593

Weight (kg) 71 93

Water inlet 3/8" 3/8"

Min/max pressure (mpa) 0,1 / 0,6 0,1 / 0,6

Drain pipe diameter (mm) 16

1 Coffee filter holder 1 1

2 Coffees filter holder 2 3

Blind filter 1 1

Tamper 1 1

Drain pipe 1 1

Incoming water pipe 1 1

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 9MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 9 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

4 - Installation

The installation, maintenance and repair of the machines must be carried out only by

qualified personnel.

The appliance must be installed so that the support surface is at least 1.20m high. The

support plane must be well levelled and dry, and stable. The machines are equipped

with height adjustable feet.

This appliance is not suitable to be installed in an area where a water jet could be used,

nor to be installed outdoors. This device is only suitable for installation in places where

its use and maintenance is restricted to qualified personnel.

To ensure correct use, the machine must be installed in places where the ambient

temperature is between + 5ºC / + 32ºC and the humidity does not exceed 70%.

It is advisable to leave a space around the machine in order to speed up maintenance

work, as well as the space for the coffee grinder.

In order to avoid the freezing of water in the machine, avoid installing it in places with

an ambient temperature equal to or lower than 0ºC. In case of freezing do not use the

machine and contact the manufacturer.

The appliance must be powered exclusively with potable and cold water in accordance

with current legislation. The pressure of the water network must be between 0.1 and

0.6 MPa. If this requirement is not met, consult the manufacturer. Between the water

network and the feeding tube of the machine, a stopcock must be installed in order to

interrupt the supply when necessary.

The water and steam expelled by the machine’s tubes are extremely hot and can cause

serious injury.

Any failure to comply with the instructions and warnings given by the manufacture may

invalidate the machine’s warranty.

Model Machine code Machine number

Current rate

Cycles Power

Voltage

Boiler capacity Boiler pressure Manufacture date

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 10MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 10 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

The machine is supplied ready for connection according to the required specifications.

The appliance is supplied with the power cable without plug, because its fixed

installation is envisaged to the electrical network, so it is necessary to install a general

protection switch.

Before connecting the machine, make sure that the data on the rating plate correspond

to those of the electrical distribution network.

If the power cord is damaged, it must be replaced by the manufacturer, by its after-

sales service or by similar qualified personnel in order to avoid a danger.

The power supply cable must be connected to the connection provided according to

current regulations.

Disconnecting means must be incorporated into the fixed installation in accordance

with the installation regulations.

ATTENTION!

The machines model BIG DREAM T 2/3 groups are configured to make a two-

phase (1/2 GR) / three-phase (3 GR) connection, as indicated in the diagram

incorporated into the connection cable. Special attention must be paid to the

connection of each of the phases as well as the cable corresponding to the

neutral of the electrical system.

ATTENTION!

It is essential to connect the machine to a properly grounded connection.

R = PHASE/FASE

S = PHASE/FASE

T = PHASE/FASE

N = NEUTRAL/

NEUTRO

BL = BLUE/AZUL/BLU/

BLAU/BLEU

YG = YELLOW-GREEN/

AMARILLO-VERDE/

VERDE GIALLO/

GELB-GRÜN/JAUNE-VERT

BR = BROWN/MARRÓN

MARRONE/BRAUN/MARRON

BK = BLACK/NEGRO/

NERO/SCHWARZ/NOIR

GR = GREY/GRIS/GRIGIO/

GRAU/GRIS

5 - Electrical connection

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 11MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 11 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

Coffee

(W) Steam

(W) TOTAL AMP

230V 1P CE Parameter

123456

2GR

2 x 1000 2 x 1750 24 A 7,5 A 15 A 19,5 A 24 A 24 A 24 A

3GR

3 x 1000 2 x 1750 29 A 7,5 A 15 A 19,5 A 24 A 29 A 29 A

ATTENTION!

The connection in single-phase mode of these machines will lead to high

consumption of electric current, sockets supporting 25 A for the model of

2 groups, and 30 A for the 3 groups, are necessary. It is possible to limit the

maximum amperage by means of the software of configuration of the machine,

limiting the number of heating elements that work simultaneously (see section

12). The power / amperage table based on the configuration of the number of

heating elements that work simultaneously is as follows:

ATTENTION!

It is possible to connect the machine having all heating elements disabled for

exhibition purpose. Please check section 12 for more information.

POWER/CURRENT TABLE

First, we will connect the free end of the drain pipe supplied with the machine to the

previously installed general drain outlet.

In connection with the general network, a tap must be incorporated to interrupt the

flow of water to the appliance when necessary. Next, we will connect the flexible hose

(connection 3/8 “H) to the pump and to the water inlet of the network. In case a water

treatment system is installed, we will connect the hose to the outlet of said system.

Attention! Recommended water parameters:

6 - Hydraulic connection

T.D.S. 90-150 ppm pH 6.5-8

Total hardness 70-100 ppm Alkalinity 40-80 ppm

Total Iron 0-0.02 ppm Chloride 0-30 ppm

Free chlorine 0-0.05 ppm Network pressure 0.1-0.6 MPa

Total chlorine 0-0.1 ppm Flow rate 8 l/min

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 12MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 12 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

If these parameters are not met in mains water, a specific filtration device must be

installed, always complying with current national and local regulations regarding

drinking water.

Once the water inlet and drain connections have been made, we will open the valve or

tap to fill the boiler.

ATTENTION!

This equipment is to be installed with adequate backflow protection to comply

with applicable federal, state or local codes.

Set the main switch to the "ON" position and automatically the machine will proceed to

fill the boiler to the set level. Once the filling process has been completed, the water will

be heated up to the working temperature and pressure.

Pump pressure regulation:

The pump is factory-set to 9 bar

pressure. If it is necessary to

adjust it, please turn the pump

regulator placed under the

machine. Turning it clockwise will

increase pressure, and counter

clockwise will decrease it. Please

check pressure while adjusting on

manometer.

From this moment, it will be necessary to wait until the temperature of the coffee

groups reaches the set-point (showed in the specific display of each group dedicated

to the temperature and also in the main display) in order to start making coffee, and

until the temperature of the steam/hot water boiler (showed in the main display)

reaches the set-pint one (the pressure gauge will show a pressure between 1 and 1.5

bar depending on the set-point) in order to start using the hot water or steam function.

7 - Start-up

ATTENTION: During the heating up of the groups, the 5 keys of each control

panel will alternate to be ON and OFF until group reaches set temperature. Then

5 keys will change to permanent ON position.

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 13MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 13 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

You can use any type of coffee. For optimal results, we recommend using mixtures

prepared for the preparation of espresso coffee since the grinding point will be

adequate. If the coffee comes out very quickly or very slowly, it will be necessary to

change the type of coffee for another fine or coarser grind and experiment with the

pressing according to our preferences.

The steps to follow are:

1. You must have the machine connected. Place the filter holder (with filter) in the

group.

2. The 5 keys of the keypad must be permanently illuminated, which indicates that

the coffee machine has reached the ideal temperature to make coffee.

3. Press the XL key (continuous coffee output) of the keypad and let water through

the group. Perform this action before making coffee, eliminate waste and balance

the temperature for optimal service.

4. The pan must be filled 3/4 of its capacity, once pressed.

5. Clean coffee residues that have been deposited on the edges of the clay so that

the adjustment is perfect.

6. Insert the filter holder in the group starting from your left and turning to the right

with enough final pressure.

Place the cups or cup on the rack and press the keypad in the desired selection. The

perfect extraction of an espresso requires 20/25 seconds.

8 - Coffee preparation

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 14MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 14 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

ATTENTION!

To obtain an optimum coffee extraction quality, always use the appropriate filter

for 1 or 2 coffees.

ATTENTION!

If the coffee comes out very fast or very slowly, it will be necessary to change the

grind of the finest or thickest coffee and experiment with the pressing according

to our preferences.

GENERAL ADVICE

1. The filter holder must always be placed on the machine to keep it warm. In closed

position.

2. Place the cups on the cup-warmer. The temperature (optimum 40ºC / 105ºF) will

improve our espresso.

3. The coffee will continue to come out in small drops a few seconds after turning off

the coffee breaker.

4. It is advisable to grind the amount of coffee needed at the time it is needed

because the ground coffee quickly loses its aroma qualities and the fatty

substances contained in the coffee become rancid.

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 15MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 15 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

To program the amount of coffee (volumetric dose) or hot water (set by time, not

volume), with the machine ON and ready to make coffee (keys of the keypad

permanently lit), press the programming button XL for 5 or 6 seconds until it is lit

intermittently while the rest of the keys are illuminated in a fixed manner.

Then press the key of the selection you want to program, which is lit intermittently at the

same time that the other four keys are off. The erogation process begins.

Once the desired quantity has been obtained, press again the key belonging to the

selection you are programming. The dispensing process is stopped, and the key light

is OFF. Press XL button until all keys are ON except for this one, and then press it

twice until machines gets back to working mode. You can also wait for 30 seconds so

machine gets back to working mode automatically.

If you want to get coffee at will (continuous), press the XL key. When you get the

desired amount, press again to interrupt the delivery.

9 - Programming dose of coffee and hot water

Hot water selection

Short

Hot water selection

Large

ATTENTION!

In machines of 2 and 3 groups, when programming the left group, they are

automatically programmed with the same volume parameters located to the

right of this. You can program different selections at once, without getting out

of programming mode. Just follow same steps with the different selections you

need to set.

ATTENTION!

To program hot water buttons follow the same process. Short hot water selection

must be set through group 1, while large hot water selection must be set through

group 2.

1 espresso 1 lungo 2 espressos 2 lungo continuous

(press again

to discontinue

the dose)

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 16MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 16 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

ADVICE. You can also adjust the dose through the main display, introducing the

volume you want for each selection directly on the display (ml). The sequence to get to

dose adjustment setting is as follows:

The true “cappuccino” is composed of 25 milliliters of espresso coffee and 125

milliliters of cold milk mounted with steam, which will go from 3 or 4 degrees Celsius to

about 55 degrees Celsius. The milk must be bovine and fresh with a protein content of

3.2 percent and 3.5 percent fat, and assembled - just the amount needed for a cup - in

a steel container (jar) to avoid mixing with other scents or flavors.

The density of the cream has to be uniform without there being a separation with the

liquid, nor can it present holes or bubbles.

PREPARATION

• Please check in the display that steam boiler reaches correct working temperature,

and that the steam pressure gauge shows a pressure between 1. 2 / 1.5 bar.

When switching ON for the first time, the boiler will be ready to dispense water and

steam in approximately 20 min.

• Turn the steam lever. It is normal that at the beginning of the steam service a little

water comes out of the pipe, so we recommend that you position the pipe in the

drain pan.

• Insert the tube into the milk to be heated. Fill up to 1/3 of the jar.

ADVICE. You can modify the temperature of the steam boiler through the main display.

Maximum allowed temperature is 130ºC. The sequence to get to the boiler temperature

setting is as follows:

1) TEXTURE: Getting cream

To obtain the consistency called “velvet”, the cappuccinator

tube should be placed just below the surface of the milk.

Open the steam control and move the tube at different

angles (always under the surface of the milk) to achieve

10 - Preparation of the cappuccino

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 17MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 17 30/05/2023 13:24:2430/05/2023 13:24:24

ENGLISH

an emulsion effect thanks to air circulation. Once textured, the volume of milk can be

doubled.

Please remember to move the jug and steam tube, always making sure it works in the

most superficial area of the milk. After this operation, the milk is textured but is still cold.

2) TEMPERATURE: Heating the milk

Once the texture is obtained, we submerge the steam tube

(10) in the jug deeper. We make circular movements to

heat the milk in all its volume until it reaches the desired

temperature.

ATTENTION! Texture requires working under the surface of

the milk and heating requires working deeper

Texture Heating

Remember not to heat the milk to more than 75ºC. From this temperature the milk will

be blanched and lose its properties for the cappuccino.

Once the operation is finished, turn the knob (9) to close the steam outlet.

ADVICE. The espresso is extracted at 75ºC-80ºC. The milk is textured and hot

between 55ºC-70ºC. It is important to keep these temperatures when serving, so the

cups must be heated using the cup-warmer zone of the coffee maker. If this is not

possible, warm the cup with hot water before using it.

Once we have the hot and textured milk, we are ready to serve it in the cup, adding it to

our espresso base.

POSSIBLE PROBLEMS

The cream can be excessively thin and without consistency.

1) One of the reasons may be that the milk had already warmed up in advance.

2) The milk has been heated too much (the steam tube is placed deeper in the jar

and the milk is heated without letting the air circulate on the surface) before having

achieved the desirable texture. We have not done step 1 correctly: TEXTURAR and we

have not let the air work the milk.

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 18MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 18 30/05/2023 13:24:2530/05/2023 13:24:25

ENGLISH

Attention! If you have used the steam or water service for a long period without

interruption and observe that the output pressure drops, wait a few moments for the

boiler to recover. The optimum pressure is 1 / 1,5 bar.

IMPORTANT!

After each use it is advisable to let steam out for 5 seconds to clean

the duct and prevent it from becoming clogged. To clean the absorption

holes (A) you can use a clip. Make sure that the tube is free of obstacles.

Put a cup or container under the water outlet. Operate the hot water switch (8, short or

large selection) to obtain water.

Both selections are set by time and will stop automatically after reaching the setting. If

you want to modify it, please follow section 9.

11 - Preparation of hot water

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 19MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 19 30/05/2023 13:24:2530/05/2023 13:24:25

ENGLISH

It is possible to control all functions and parameters of the machine through the main

display.

Please find below information about each one of them.

AENERGY SAVING OPTIONS. It is possible to switch ON or OFF each

one of the coffee groups as well as the boiler, and set the time after

which they may get into ECO mode, and also its stand-by temperature

after that.

Switch ON or OFF coffee

groups Switch ON or OFF boiler

Coffee groups ECO

temperature setting

Boiler ECO temperature

setting

Coffee groups ECO mode

starting time

Boiler ECO mode starting

time

BGROUP CLEANING. It allows to carry on cleaning process of each

one of the coffee groups. Cleaning process consist of 10 consecutive

rinsing of 10 seconds, with a 3 second delay between them.

12 - Display options

ATTENTION!

Please use blind filter on each group where cleaning process is being applied.

Depending on cleaning frequency, please consider using cleaning product ref.

V.8401 or V.8402, following instructions specified on it. This process dissolves the

dust contained in the blind filter, cleaning the ducts and the solenoid valve, as

well as the showers and diffusers of the group. You can repeat this process as

many times as necessary and until clean water appears through the discharge

of the group.

Once finished, remove the filter holder and operate the group for 30 seconds,

passing clean water.

ATTENTION!

It is possible to stop the process pressing any of the keys of the control panel

belonging to the coffee group being cleaned.

MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 20MAN.47 V4 - MANUAL BIG DREAM T 2022_EN_ES_DE_FR.indd 20 30/05/2023 13:24:2530/05/2023 13:24:25

La page charge ...

Ascaso BIG DREAM T Manuel utilisateur

Marque: Ascaso

Modèle: BIG DREAM T

Catégorie: Cafetières

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Ascaso BIG DREAM T User manual
español: Ascaso BIG DREAM T Manual de usuario
Deutsch: Ascaso BIG DREAM T Benutzerhandbuch

Ascaso BIG DREAM T Manuel utilisateur

Ascaso BIG DREAM T Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents