Vivitar VIVCLFL60 Mode d'emploi

VIVCLFL60
Vivitar
Marque
Vivitar
Modèle
VIVCLFL60
Taper
Mode d'emploi
Smart led Floodlight
Product Parameters
Product Name: 60W Smart LED Floodlight
Connection Methods: BT Mesh
APP Name: Shine Light
Suitable Phone OS: Android 4.0/IOS9.0
Channels: 5
Wattage: 60W
Light Luminous Flux：5000LM
Color Temperature：2800K-6800K
Working Temperature: -20 TO+45℃
Holder：3-PIN Line
Control Distance: Visible distance 20M
Voltage: 100-277V ~, 50/60HZ
Waterproof: IP66
Average Life(hrs): 22000H
Certification: FCC/CE/ROHS
About wiring
Remember the groud wire to be connected ,so as not to
cause electric shock in the product immersion in the rain.
Plug directly into the socket, can be powered to use
For your safety ,please install under professional guidance.Please
Make sure the power is off before wiring.
IP Grade-IP66
If you don’t know the protection level,please to the chart,the third(IPXX)for dust level, the fourth
(IPXX) for waterproof level.Do not soak the lamps with insufficient protection under water for a
long time!
Placement and installation method
Instructions before installation:
1. Arrange all kinds of parts for supporting lamps.
2. Check the input voltage,power and other parameters of lamp carefully before installation.
3. Make sure the power is off before installation.
4. Make sure that the core of the core of the external power line does not leak out when wring.
Installation Diagram
Dustproof Level
Waterproof Level
0
No protection
No protection
1
Prevent the invasion of
large solids
There will be no effect on housing if drip
drops into it.
2
Prevent the medium size so
lids from invading
When the housing tilts to 15degrees, there will
be no effect on housing if drip drops into it
3
Prevent the small solids from
invading
There will be on effect on housing if water or
rain drops into it from 60 degrees.
4
Prevent the solid which is
greeter than 1mm from
invading
There will be no damage on housing if throw
the liquid to it from any directing
5
Prevent hamful dust from
accumuiation
There will be no any damage if washing with
water
6
Compieteiy prevent dust
from entering
Can bused in the cabin environment
7
it can be soaked in water for a short time
8
Under certain pressure it can be soaked in
water for long
1. APP download
The public version of the APP has now been released to mainstream APP stores around the world.
You can search "Shine Light" in the APP store, or scan the qr code below to download it.
IOS: iOS Appstore in China and overseas
Android: Google Play, etc., continue to increase
2. Device default pairing guidelines：
1.After downloading the APP, register an account in the us domain to use it.The mobile phone
needed to open the bluetooth function.
2.Enter the password of the current connection router (the user can manually switch the connected
router), click the next step to start the network distribution, and confirm whether the device is in
the state of network distribution.
3，After successful network distribution, it will automatically jump to the details page of the
device.The control test can be performed at this point.
4、Note:
If you can’t search your Bluetooth bulb device or can’t connect with the Bluetooth
lamp device for a long time, please enter your phone ‘setting’ and connect again;
If you can’t connect to the device for a long time or other abnormal ,please close the
APP ,then try to restart;
Do not put the product in closed lampshade;
Do not put the product in the place which is humid or has water;
Keep using it under the power supply of 12V DC,50-60Hz;
This product is not a toy and keep it untouchable to children;
Do not put the product on high-temperature surface;
Do not open any sealing device for safety and according to Warranty Terms;
3.FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 20cm between the
radiator & your
body.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference,and (2) this device must accept
any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.This equipment
should be installed and operated with a minimum distance of 20 cm between the radiator and your
body
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur
et votre corps
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Vivitar VIVCLFL60 Mode d'emploi

VIVCLFL60
Vivitar
Marque
Vivitar
Modèle
VIVCLFL60
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents