Philips 4300 serie Manuel utilisateur

Marque: Philips

Modèle: 4300 serie

Catégorie: Cafetières

Taper: Manuel utilisateur

Ce manuel convient également à

Fully automatic

espresso machine

4300 series

5400 series

EN USER MANUAL

FR MODE D’EMPLOI

ES MANUAL DEL USUARIO

www.philips.com/coee-care

www.philips.com/coee-care

PHOENIX COVER_FRONT_A5_USA.indd 1PHOENIX COVER_FRONT_A5_USA.indd 1 25-06-20 14:1125-06-20 14:11

A2A1 A3 A4

A14

A8A7A6

A12

A13

A10

A11

A17

A15

A20

A18

A16

A19 A21 A22 A23 A24 A25

A17A18 A16 A14 A25 A24 A22 A15 A9 A4 A12

Classic Milk Frother

Series 4300

Series 5400

EP4321

EP5447

EP4347

LatteGo

SettingsClean

Espresso Americano Cappuccino Latte Macchiato

Cafe au lait More Drinks

A20 A21 A22 A23 A24 A25

D1 D2 E1 E2

C3C4C5C6C8 C2C7

English

Contents

Machine overview (Fig. A)____________________________________________________________________ 7

Control panel_________________________________________________________________________________ 8

Introduction _________________________________________________________________________________ 8

Before first use _______________________________________________________________________________ 9

Brewing drinks _______________________________________________________________________________ 10

Personalizing drinks__________________________________________________________________________ 13

Adjusting machine settings __________________________________________________________________ 14

Removing and inserting the brew group ____________________________________________________ 15

Cleaning and maintenance __________________________________________________________________ 16

AquaClean water filter ______________________________________________________________________ 19

Descaling procedure (30 min.) ______________________________________________________________ 20

Ordering accessories_________________________________________________________________________ 21

Troubleshooting _____________________________________________________________________________ 21

Technical specifications _____________________________________________________________________ 28

Machine overview (Fig. A)

A1 Control panel A10 Service door

A2 Cup holder A11 Data label with type number

A3 Pre-ground coffee compartment A12 Water tank

A4 Lid of bean hopper A13 Hot water spout

A5 Adjustable coffee spout A14 Coffee grounds container

A6 Socket for power cord A15 Front panel of coffee grounds

container

A7 Grind setting knob A16 Drip tray cover

A8 Coffee bean hopper A17 Drip tray

A9 Brew Group A18 'Drip tray full' indicator

Accessories

A19 Power cord A23 Water hardness test strip

A20 Grease tube A24 Classic milk frother (specific types

only)

A21 AquaClean water filter A25 LatteGo (milk container) (specific

types only)

A22 Measuring scoop

English

Control panel

There are multiple versions of this espresso machine, with different control panels. Each

version has its own type number. You can find the type number on the data label on the

inside of the service door (Fig. A11). You can also find the type number by tapping the Settings

icon and selecting 'Support'.

Refer to figure C, D and E for an overview of all buttons and icons. Below you find the

description.

Use the up and down arrows to scroll through the display and tap the OK icon to select or

confirm your choices.

All types (Fig. C/D/E)

C1/D1/E1 One-touch drink

icons

C3. Navigation icons (up,

down, back, ok)

C6. Cleaning menu

C2. Start/stop button C4. Display C7. Personal profiles

D2/E2 Menu with More Drinks C5. Machine settings C8. On/off button

EP4321 only (Fig. C)

C1 One-touch drink icons: Espresso, Coffee, Americano, Caffé Crema, Ristretto, Hot Water and

Steam

EP4347 only (Fig. D)

D1 One-touch drink icons: Espresso, Coffee, Americano, Cappuccino, Latte Macchiato, Café au

lait

EP5447 only (Fig. E)

E1 One-touch drink icons: Espresso, Coffee, Americano, Cappuccino, Latte Macchiato, Café au

lait

Introduction

Congratulations on your purchase of a Philips fully automatic coffee machine! To fully benefit

from the support that Philips offers, register your product at

www.philips.com/registeryourcoffee.com or by scanning the QR code (Fig. 1) in this booklet.

Read the separate safety booklet carefully before you use the machine for the first time and

save it for future reference.

To help you get started and to get the best out of your machine, Philips offers support in

multiple ways. In the box you find:

1 This user manual with picture-based usage instructions and more detailed information on

cleaning and maintenance.

2 The separate safety booklet with instructions on how to use the machine in a safe way.

English

3 For online support (frequently asked questions, movies etc.), scan the QR code on the

cover of this booklet or visit https://www.usa.philips.com/c-m-ho/coffee/your-philips-

espresso-machine. You can also find the QR code by tapping the Settings icon and

selecting support.

This machine has been tested with coffee. Although it has been carefully cleaned, there

may be some coffee residues left. We guarantee, however, that the machine is absolutely

new.

The machine automatically adjusts the amount of ground coffee that is used to make the

best-tasting coffee. You should brew 5 coffees initially to allow the machine to complete its

self-adjustment.

Make sure you rinse the LatteGo (milk container) or the classic milk frother before first use.

Before first use

,WDOLDQR

1HGHUODQGV

(QJOLVK

(VSD³RO

/DQJXDJH

:DWHUKDUGQHVV

,WDOLDQR

1HGHUODQGV

(QJOLVK

(VSD³RO

/DQJXDJH

)ROORZWKHQH[WVWHSV

WRVHWWKHFRUUHFW

ZDWHUKDUGQHVVOHYHO

<RXDUHDERXW

WRVHWWKHODQJXDJH

WR(QJOLVK

3UHVVVWDUWVWRS

WRFRQILUP

:DWHUKDUGQHVV

<RXVHOHFWHG

UHGVTXDUHV

3UHVVWRFRQILUP

+HDWLQJXS

+HDWLQJ

5LQVLQJ

5LQVLQJ

)LOOLQJZDWHUFLUFXLW

)LOOLQJ











:DWHUKDUGQHVV

1 sec.

1 min.

English

5 sec.

30 sec.

1 min.

$TXD&OHDQ

8VH$TXD&OHDQILOWHU

WRHQMR\FXSV

ZLWKRXWGHVFDOLQJ

$OPRVWUHDG\

)LOOEHDQVUHILOOZDWHU

WDQNDQGHQMR\

\RXUFRIIHH

5HJLVWHU\RXUSURGXFW

9LVLWZZZSKLOLSVFRP

$TXD&OHDQ

:RXOG\RXLQVWDOO

DQ$TXD&OHDQILOWHU"

3UHVVWRFRQILUP

3UHVVWRUHIXVH

Assembling LatteGo (specific types only)

CLICK

Assembling the classic milk frother (specific types only)

Brewing drinks

General steps

1 Fill the water tank with tap water and fill the bean hopper with beans.

2 Insert the small plug into the socket located on the back of the machine. Insert the mains

plug into the wall socket.

3 Press the on/off button to switch on the machine.

The machine starts heating up and performs the automatic rinsing cycle.

When all lights in the drink icons light up continuously, the machine is ready for use.

4 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or

down to adjust its height to the size of the cup or glass you are using (Fig. 2).

English

Brewing coffee with beans

1 To brew a coffee, tap the drink icon of your choice (Fig. 3) or tap the 'More Drinks' icon (Fig.

4) (specific types only).

You can now adjust the drink to your personal taste (Fig. 5). Use the up and down arrows

(Fig. 6) to adjust the coffee strength. Tap the OK icon if you want to adjust more settings

(Fig. 7).

2 Press the start/stop

button at any time to start brewing the selected drink.

3 To stop dispensing coffee before the machine is finished, press the start/stop

button

again.

To brew 2 coffees at the same time, tap the drink icon twice or select the 2x icon scrolling

the dedicated bar.

Do not use caramelized or flavored coffee beans.

Brewing milk-based drinks with LatteGo (milk container)

LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure

the frame and the milk container are properly assembled before you fill the milk container.

1 To assemble LatteGo, first insert the top of the milk container under the hook at the top of

the frame (Fig. 8). Then press home the bottom part of the milk container. You hear a click

when it locks into place (Fig. 9).

Note: Make sure that the milk container and the frame are clean before you connect them.

2 Slightly tilt LatteGo and put it on the hot water spout (Fig. 10). Then press it home until it

locks into place (Fig. 11).

3 Fill LatteGo with milk (Fig. 12). Do not fill the milk container beyond the maximum

indication.

If you have personalized the milk quantity, you may need to fill the milk container with

more or less milk than indicated for this drink on LatteGo.

Always use milk coming directly from the fridge for optimal results.

4 Place a cup on the drip tray.

5 Tap the milk-based drink icon of your choice or tap the 'More Drinks' icon (specific types

only) to select a different drink (see 'Personalizing drinks')

You can now adjust the drink to your own preference.

6 Press the start/stop

button.

When you brew cappuccino, flat white or latte macchiato, the machine first dispenses

milk and then coffee. When you brew caffè latte or café au lait, the machine first

dispenses coffee and then milk.

To stop dispensing milk before the machine has dispensed the preset amount, press the

start/stop

button.

7 To stop dispensing the complete drink (milk and coffee) before the machine is finished,

press and hold the start/stop

button.

English

Frothing or heating up milk with classic milk frother

Always use milk coming directly from the fridge for the best foam quality.

1 Tilt the black silicone handle on the machine to the left and slide the milk frother onto it

(Fig. 13).

2 Fill a milk jug with with approx. 100 ml milk for cappuccino and approx. 150 ml milk for latte

macchiato.

3 Insert the milk frother approx. 1 cm into the milk.

4 Tap the steam icon (Fig. 14).

5 Turn the knob on the classic milk frother to the milk frothing icon (Fig. 15) if you want to

froth milk. Turn the knob on the classic milk frother to the flat milk icon (Fig. 16) if you want

heat up milk.

6 Make sure that the icon on the knob of the classic milk frother is aligned with the black

arrow.

7 Press the start/stop

button to start (Fig. 17).

The machine starts heating up, steam is forced into the milk and the milk is either

frothed or heated.

8 When the milk in the milk jug has reached the required foam volume or heat, press the

start/stop button again to stop frothing/heating milk.

Never steam milk longer than 90 seconds. The steaming automatically stops after 90

seconds.

In order to get the best milk froth quality, you do not have to move the milk jug during milk

frothing.

Extra shot (ExtraShot) (specific types only)

Your machine offers you the possibility to add an extra shot of Ristretto to your coffee and

milk drinks, for example if you want to have a stronger coffee.

1 Place a cup under the spout

2 Tap one of the one-touch drinks icons to select a drink or tap the 'More Drinks' icon

(specific types only) to select a drink.

3 Use the up arrow to set the strength to the top level and then select the ExtraShot function

(Fig. 18).

4 Tap the OK icon if you want to personalize the other settings. Then press the start/stop

icon to start brewing the drink.

5 To stop dispensing the drink before the machine has finished, press the start/stop

icon

again.

When you have selected the ExtraShot function, you can only brew one coffee at the time.

Brewing coffee with pre-ground coffee

You can choose to use pre-ground coffee instead of beans, for example if you prefer a

different coffee variety or decaffeinated coffee.

English

1 Open the lid of the pre-ground coffee compartment and pour one leveled measuring

scoop of pre-ground coffee into it (Fig. 19). Then close the lid.

2 Tap one of the one-touch drink icons or tap the 'More Drinks' icon (specific types only) to

select another drink.

3 Select the pre-ground coffee function. You can do this in 2 different ways:

use the down arrow to set the strength to the lowest level and then select the pre-ground

function.

press the Settings

icon and use the down arrow to select the pre-ground function.

4 To stop dispensing coffee before the machine has finished, press the start/stop

button

again.

When you select the pre-ground coffee function:

- it is automatically stored.

- you can only brew one coffee at a time.

- you cannot select a different aroma strength.

Dispensing hot water

1 If attached, remove LatteGo or the milk frother.

2 Place a cup under the hot water spout.

3 Tap the 'Hot Water' icon (specific types only) or tap the 'More Drinks' icon (specific types

only) (Fig. 4) to select hot water.

4 Use the up and down arrows to adjust the hot water quantity and/or temperature to your

preference.

5 Press the start/stop

button.

Hot water is dispensed from the hot water spout (Fig. 20).

6 To stop dispensing hot water before the machine is finished, press the start/stop

button

again.

Personalizing drinks

The machine allows you to adjust the settings of a drink to your own preference and to store

the adjusted drink in a personal profile. The different profiles have different colors.

After selecting a drink by tapping one of the one-touch drink icons or by tapping the 'More

Drinks' icon (specific types only), you can do the following things:

1 adjust the aroma strength with the up and down icons (Fig. 21). There are 5 strengths, the

lowest is the mildest and the highest is the strongest.

2 adjust the coffee quantity (Fig. 22) and/or the milk quantity (specific types only) with the up

and down icons. There are 5 quantities for each of the settings.

As soon as the machine has finished brewing, the settings you selected will be stored

automatically in the profile you chose.

Select a profile

You can select a profile and store a recipe using My coffee choice profiles (My Coffee Choice

Profiles).

English

1 Tap the profiles icon repeatedly to select one of the colored profiles. All profiles have a

different color.

2 Select a drink by tapping one of the one-touch drink icons or by tapping the 'More Drinks'

icon (specific types only).

3 Adjust the drink settings to your favorite taste.

4 Press start/stop

button to brew the drink you selected

Your new settings have now been stored in the colored profile you selected.

You can always restore the factory settings of the machine (see 'Restoring factory

settings').

Guest profile

Your machine is equipped with a guest profile. When the guest profile is selected, the profile

icon is off. When you select this profile, you can still personalize the settings to your own

preference but the recipes you brew will not be stored.

Adjusting machine settings

Setting the water hardness

We advise you to adjust the water hardness setting to the water hardness level in your

region for optimal performance and a longer lifetime of the machine. This also prevents you

from having to descale the machine too often. The default water hardness setting is 4: hard

water.

Use the water hardness test strip supplied in the box to determine the water hardness in

your region:

1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig.

23).

2 Wait 1 minute. The number of squares on the test strip that turn red indicates the water

hardness (Fig. 24).

Set the machine to the correct water hardness:

1 Tap the Settings

icon and use the up and down arrows to select 'Water hardness'. Then

press the OK icon to confirm.

2 Use the up and down icons to select the water hardness level. The number of red squares

selected on the display should be the same as the number of red squares on the test strip

(Fig. 25).

3 When you have set the correct water hardness, tap the OK icon to confirm.

Adjusting grinder settings

You can change the coffee strength with the grind setting knob inside the bean container. The

lower the grind setting, the finer the coffee beans are ground and the stronger the coffee.

There are 12 different grind settings you can choose from.

English

The machine has been set up to get the best taste out of your coffee beans. Therefore we

advise you not to adjust the grinder settings until you have brewed 100-150 cups (approx. 1

month of use).

You can only adjust the grind settings when the machine is grinding coffee beans. You need

to brew 2 to 3 drinks before you can taste the full difference.

Do not turn the grind setting knob more than one notch at a time to prevent damage to the

grinder.

1 Place a cup under the coffee dispensing spout.

2 Open the lid of the coffee bean hopper.

3 Tap the espresso icon and then press the start/stop

button.

4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or

right. (Fig. 26)

Adjusting other machine settings

By tapping the Settings

icon you can adjust the following machine settings:

Water hardness: you can select between 5 levels according to the water hardness in your

region;

Standby time: you can select 15, 30, 60 or 180 min

Display brightness: you can select low, medium and high.

Language

Sound: you can activate or deactivate the beeping sound of the machine

Temperature: you can choose between 3 brewing temperatures for your coffee

Front illumination (specific types only): you can choose 'always on', 'on during brewing' or

'always off'.

Measuring unit: you can choose between ml. or oz.

Restoring factory settings

The machine offers you the possibility to restore the factory settings at any moment.

1 Tap the Settings

icon.

2 Use the up and down icons to select 'Factory settings'. Confirm by tapping the OK icon.

3 Press the start/stop button to confirm you want to restore the settings.

The settings are now being restored.

The following factory settings are restored to default: water hardness, standby time, display

brightness, sound, temperature, front illumination, profiles.

Removing and inserting the brew group

Go to https://www.usa.philips.com/c-m-ho/coffee/your-philips-espresso-machine for

detailed video instructions on how to remove, insert and clean the brew group.

English

Removing the brew group from the machine

1 Switch off the machine.

2 Remove the water tank and open the service door (Fig. 27).

3 Press the PUSH handle (Fig. 28) and pull at the grip of the brew group to remove it from the

machine (Fig. 29).

Reinserting the brew group

Before you slide the brew group back into the machine, make sure it is in the correct

position.

1 Check if the brew group is in the correct position. The arrow on the yellow cylinder on the

side of the brew group has to be aligned with the black arrow and N (Fig. 30).

If they are not aligned, push down the lever until it is in contact with the base of the

brew group (Fig. 31).

2 Slide the brew group back into the machine along the guiding rails on the sides (Fig. 32)

until it locks into position with a click (Fig. 33). Do not press the PUSH button.

3 Close the service door and place back the water tank.

Cleaning and maintenance

Regular cleaning and maintenance keeps your machine in top condition and ensures good-

tasting coffee for a long time with a steady coffee flow.

Consult the table below for a detailed description on when and how to clean all detachable

parts of the machine. You can find more detailed information and video instructions on

https://www.usa.philips.com/c-m-ho/coffee/your-philips-espresso-machine. See figure B

for an overview of which parts can be cleaned in the dishwasher.

Detachable parts

When to clean How to clean

Brew group Weekly Remove the brew group from the

machine (see 'Removing and inserting

the brew group'). Rinse it under the tap

(see 'Cleaning the brew group under the

tap').

Classic milk frother After every use First clean the milk frother while it is

attached to the machine by using the

'Quick milk clean' program (see 'Quick

cleaning the classic milk frother'). Then

remove the milk frother from the

machine and disassemble it. Clean all

parts under the tap or in the dishwasher.

English

Detachable parts When to clean How to clean

Pre-ground coffee

compartment

Check the pre-ground coffee

compartment weekly to see

if it is clogged.

Unplug the machine and remove the

brew group. Open the lid of the pre-

ground coffee compartment and insert

the spoon handle into it. Move the

handle up and down until the clogged

ground coffee falls down (Fig. 34). Go to

https://www.usa.philips.com/c-m-

ho/coffee/your-philips-espresso-

machine for detailed video instructions.

Coffee grounds

container

Empty the coffee grounds

container when prompted by

the machine. Clean it weekly.

Remove the coffee grounds container

while the machine is switched on. Rinse

it under the tap with some washing-up

liquid or clean it in the dishwasher. The

front panel of the coffee grounds

container (Fig. A15) is not dishwasher-

safe.

Drip tray Empty the drip tray daily or

as soon as the red 'drip tray

full' indicator pops up

through the drip tray (Fig. 35).

Clean the drip tray weekly.

Remove the drip tray (Fig. 36) and rinse it

under the tap with some washing-up

liquid. You can also clean the drip tray in

the dishwasher. The front panel of the

coffee grounds container (Fig. A15) is

not dishwasher-safe.

LatteGo After every use First clean LatteGo while it is attached to

the machine by using the 'Quick milk

clean' program (see 'Quick cleaning

LatteGo'). Then remove it from the

machine and rinse it under the tap or

clean it in the dishwasher.

Lubrication of the

brew group

Every 2 months Consult the lubrication table and

lubricate the brew group with the Philips

grease (see 'Lubricating the brew group').

Water tank Weekly Rinse the water tank under the tap

Machine front Weekly Clean with a non-abrasive cloth

Cleaning the brew group

Regular cleaning of the brew group prevents coffee residues from clogging up the internal

circuits. Visit https://www.usa.philips.com/c-m-ho/coffee/your-philips-espresso-machine

for support videos on how to remove, insert and clean the brew group.

Cleaning the brew group under the tap

1 Remove the brew group (see 'Removing and inserting the brew group').

2 Rinse the brew group thoroughly with water. Carefully clean the upper filter (Fig. 37) of the

brew group.

English

3 Let the brew group air-dry before you place it back. Do not dry the brew group with a cloth

to prevent fibers from collecting inside the brew group.

Lubricating the brew group

To improve your machine's performance, we suggest that you lubricate the brew group every

2 months, to ensure that the moving parts continue to move smoothly.

1 Apply a thin layer of grease on the piston (grey part) of the brew group (Fig. 38).

2 Apply a thin layer of grease around the shaft (grey part) in the bottom of the brew group

(Fig. 39).

3 Apply a thin layer of grease to the rails on both sides (Fig. 40).

Cleaning LatteGo (milk container) (specific types only)

Quick cleaning LatteGo

1 Make sure LatteGo is properly attached to the machine (Fig. 10).

2 Place a cup under the spout.

3 Tap the Clean

icon and use the up and down arrows to select the 'Quick milk clean'

program.

4 Tap the OK icon to confirm and then follow the instructions on the screen to remove any

milk that may be left inside the milk system.

Small jets of hot water will be dispensed by the milk system.

5 Store LatteGo with the remaining milk in the fridge.

Thoroughly cleaning LatteGo

1 Remove LatteGo from the machine (Fig. 41).

2 Pour out any remaining milk.

3 Press the release button and remove the milk container from the frame of LatteGo (Fig. 42).

4 Clean all parts in the dishwasher or under the tap with lukewarm water and some washing-

up liquid.

Cleaning the classic milk frother (specific types only)

Quick cleaning the classic milk frother

1 Make sure the classic milk frother is properly attached to the machine (Fig. 13).

2 Place a cup under the spout.

3 Tap the Clean

icon and use the up and down arrows to select the 'Quick milk clean'

program.

4 Tap the OK icon to confirm and then follow the instructions on the screen to remove any

milk that may be left inside the milk frother.

Small jets of hot water will be dispensed by the milk system.

5 Clean the milk frother with a damp cloth.

Daily cleaning of the classic milk frother

1 Let the milk frother cool down completely.

2 Tilt the milk frother to the left and remove the metal part and the silicone part (Fig. 43).

English

3 Disassemble the three parts (Fig. 44) and rinse them with fresh water or clean them in the

dishwasher.

4 Reassemble the three milk frother parts and reattach the milk frother to the machine.

AquaClean water filter

Your machine is AquaClean enabled. You can place the AquaClean water filter in the water

tank to preserve the taste of your coffee. It also diminishes the need for descaling by reducing

limescale build-up in your machine. You can purchase an AquaClean water filter from your

local retailer, from authorized service centers or online at www.philips.com/parts-and-

accessories.

AquaClean filter status indication

When the AquaClean is active, the status of the AquaClean filter is always visible on the

screen as a percentage.

If the status of the AquaClean filter is 10% or less, the screen shows a message for 2

seconds each time you switch on the machine. This message advises you to buy a new

filter.

If the status of the filter is 0%, the machine asks you to replace the AquaClean filter every

time you switch on the machine.

Activating the AquaClean water filter (5 min.)

The machine does not automatically detect that a filter has been placed in the water tank.

Therefore you need to activate each new AquaClean water filter that you install in the 'Clean'

menu.

When the machine stops showing the filter activation message, you can still activate an

AquaClean water filter, but you will need to descale the machine first.

Your machine has to be completely limescale-free before you start using the AquaClean

water filter.

Before activating the AquaClean water filter, it has to be prepared by soaking it in water as

described below. If you don't do this, air might be drawn into the machine instead of water,

which makes a lot of noise and prevents the machine from being able to brew coffee.

1 Tap the 'Clean'

icon and use the up and down arrows to select 'AquaClean'.

2 Tap the OK icon to confirm.

3 Tap the OK icon again when the activation screen appears. Follow the instructions on the

screen.

4 Shake the filter for about 5 seconds (Fig. 45).

5 Immerse the filter upside down in a jug with cold water and shake/press it (Fig. 46).

6 Insert the filter vertically onto the filter connection in the water tank. Press it down to the

lowest possible point (Fig. 47).

7 Fill the water tank with fresh water and place it back into the machine.

8 If attached, remove the LatteGo (specific types only).

9 Place a bowl under the hot water spout/milk frother.

English

10 Press the start/stop button to start the activation process.

11 Hot water will be dispensed from the hot water spout/milk frother during 1 minute.

12 The filter is now successfully activated.

Replacing the AquaClean water filter (5 min.)

After 95 liters of water have flowed through the filter, the filter will cease to work. The

AquaClean status indicator drops to 0% to remind you to replace the filter. As long as the

AquaClean status indicator is shown on the display you can replace the filter without having

to descale the machine first. If you do not replace the AquaClean water filter in time, the

AquaClean indicator goes out after some time. In that case you can still replace the filter but

you first need to descale the machine.

When the AquaClean status indicator drops to 0% or when the machine reminds you to

replace the AquaClean filter:

1 take out the old AquaClean water filter.

2 install a new filter and activate it as described in chapter 'Activating the AquaClean water

filter (5 min.)'.

Replace the AquaClean water filter at least every 3 months, even if the machine does not

yet indicate that replacement is required.

Descaling procedure (30 min.)

Please use Philips descaler only. Under no circumstances should you use a descaler based on

sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water

circuit in your machine and not dissolve the limescale properly. Not using the Philips descaler

will void your warranty. Failure to descale the appliance will also void your warranty. You can

buy Philips descaling solution in the online shop at https://www.usa.philips.com/c-m-

ho/coffee/your-philips-espresso-machine.

When the machine needs descaling, a message appears on the display.

1 Touch the clean

icon on the user interface and select 'Descaling' in the menu.

2 Follow the instructions on the screen.

3 If attached, remove LatteGo or the milk frother.

4 Remove the drip tray and the coffee grounds container, empty them and put them back

into place.

5 Remove the water tank and empty it. Then remove the AquaClean water filter.

6 Pour the whole bottle of Philips descaler in the water tank and then fill it with water up to

the Calc / Clean indication (Fig. 48). Then place it back into the machine.

7 Place a large container (1.5 l) under the coffee dispensing spout and the water spout.

8 Press the start/stop

button to start the descaling procedure. The descaling procedure

lasts approximately 30 minutes and consists of a descaling cycle and a rinsing cycle.

9 Wait until the machine stops dispensing water. Refill the water tank when the message

appears on the display. The descaling procedure is finished when the machine stops

dispensing water.

10 Install and activate a new AquaClean water filter in the water tank.

English

When the descaling procedure is finished, the machine reminds you to install the new

AquaClean filter (see 'Replacing the AquaClean water filter (5 min.)').

Tip: Using the AquaClean filter reduces the need for descaling!

What to do if the descaling procedure is interrupted

You can exit the descaling procedure by pressing the on/off button on the control panel. If

the descaling procedure is interrupted before it is completely finished, do the following:

1 Empty and rinse the water tank thoroughly.

2 Fill the water tank with fresh water up to the Calc / Clean level indication and switch the

machine back on. The machine will heat up and perform an automatic rinsing cycle.

3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual rinsing

cycle, first dispense half a water tank of hot water by repeatedly selecting the hot water

function and then brew 2 cups of pre-ground coffee without adding ground coffee.

If the descaling procedure was not completed, the machine will require another descaling

procedure as soon as possible.

Ordering accessories

To clean and descale the machine, only use the Philips maintenance products. These

products can be purchased from your local retailer, from the authorized service centers or

online at www.philips.com/parts-and-accessories. To find a full list of spare parts online,

enter the model number of your machine. You can find the model number on the inside of the

service door.

Maintenance products and type numbers:

Descaling solution CA6700

AquaClean water filter CA6903

Brita-filters are not compatible with this machine.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the machine.

Support videos and a complete list of frequently asked questions are available on

https://www.usa.philips.com/c-e/ho/coffee/coffee-troubleshooting.html. If you are unable

to solve the problem, contact the Consumer Care Center in your country. For contact details,

see the warranty leaflet.

English

Warning icons

Warning

icon

Solution

The 'water tank empty' icon pops up on the display.

The water tank is almost empty. Fill the water tank with fresh water to the

maximum level indication.

The water tank is not in place. Place back the water tank.

The 'add beans' icons pops up on the display.

Fill the bean hopper with coffee beans.

The 'empty coffee ground container' icon pops up on the display.

The coffee grounds container is full. Remove and empty the coffee

grounds container while the machine is switched on. Wait 5 seconds

before you place it back.

The 'insert brew group' icon pops up on the display.

The brew group is not in place or not placed correctly. Remove the brew

group and make sure it is locked into place. See chapter 'Removing and

inserting the brew group' for step-by-step instructions.

Error codes

Below you find a list of the error codes showing problems that you can solve yourself. Video

instructions are available on https://www.usa.philips.com/c-m-ho/coffee/your-philips-

espresso-machine. If another error code appears, please contact the Philips Consumer Care

Center in your country. For contact details, see the warranty leaflet.

Error

code

Problem Possible solution

01 The coffee funnel is

clogged.

Switch off the machine and unplug it. Remove the brew

group. Then open the lid of the pre-ground coffee

compartment and insert the spoon handle. Move the

handle up and down until the clogged ground coffee falls

down. Visit https://www.usa.philips.com/c-m-

ho/coffee/your-philips-espresso-machine for detailed

video instructions.

03 The brew group is

dirty or not well-

greased.

Switch off the machine. Rinse the brew group with fresh

water, let it air-dry and then lubricate it. Consult chapter

'Cleaning the brew group' or visit

https://www.usa.philips.com/c-m-ho/coffee/your-

philips-espresso-machine for detailed video instructions.

Then switch the machine on again.

English

La page charge ...

Philips 4300 serie Manuel utilisateur

Marque: Philips

Modèle: 4300 serie

Catégorie: Cafetières

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Philips 4300 serie User manual
español: Philips 4300 serie Manual de usuario

Philips 4300 serie Manuel utilisateur

Ce manuel convient également à

Philips 4300 serie Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents