Ingenico XKB-IUC18X-RF Manuel utilisateur

Ingenico – 28-32 Boulevard de Grenelle - 75015 PARIS

Tél. 33(0)1 58 01 80 00 - Fax 33 (0)1 58 01 91 35

Contactless payment

iUC150 & iUC180

I n t é g r a t i o n G u i d e

The scope of this document is to assist third party integrators when dealing with

Ingenico UNattended products (iUN) such as iUC150 and iUC180, or others. It offers

all information needed for a successful integration of iUC150 and iUC180 products

into unattended kiosk machines.

For any sales information please refer to your Ingenico contact into the region.

Updates table

Version Date Nature of modifications Author Visa

0.1 26/04/12 First Draft O.Fabregoule

E.Dubois

2 31/05/2012 First diffusion A. Soubiranne

O.Fabregoule

Y. Moreno

E.Dubois

Table of contents

1 GENERAL.............................................................................................................6

1.1 Definition of acronyms.....................................................................................6

1.2 iUC150 & iUC180 payment solution presentation..........................................7

1.2.1 Diagram of iUC180 & iUC150 connectivity and communications..................8

1.2.2 Services........................................................................................................9

1.3 Description of modules..................................................................................10

1.3.1 iUC180........................................................................................................10

1.3.1.1 Technical Hardware characteristics......................................................11

1.3.1.2 iUC180 output connectors description..................................................12

1.3.1.3 SAM & µSD Installation ........................................................................19

1.3.1.4 Buzzer...................................................................................................20

1.3.1.5 RGB backlight.......................................................................................20

1.3.1.6 Contactless LEDs & Contactless Logo .................................................21

1.3.1.7 Maintenance Button and LED...............................................................22

1.3.1.8 Keypad..................................................................................................23

1.3.1.9 Cable Protection ...................................................................................24

1.3.1.10 Antenna Installation.............................................................................25

1.3.1.11 Grounding connections .......................................................................26

1.3.1.12 Appearance personalisation................................................................27

1.3.2 iUC150........................................................................................................29

1.3.2.1 Technical Hardware characteristics......................................................29

1.3.2.2 iUC150 output connectors description..................................................31

1.3.2.3 SAM Installation....................................................................................33

1.3.2.4 Buzzer...................................................................................................34

1.3.2.5 Contactless LEDs & Contactless Logo .................................................35

1.3.2.6 Cable Protection ...................................................................................36

1.3.2.7 Grounding connections.........................................................................37

1.3.2.8 Appearance personalisation .................................................................38

1.3.2.9 Contactless reader iUC150 and i9500 interconnectivity........................39

1.4 Professional installation Requirement .........................................................40

2 MAIN ACCESSORIES ........................................................................................40

2.1.1 Generality ...................................................................................................40

2.1.2 Optional USB cable ....................................................................................40

2.1.3 iUC150 Power supply .................................................................................41

2.1.4 Serial cable.................................................................................................41

2.1.5 Adapter cable..............................................................................................42

2.1.6 LLT cable....................................................................................................42

2.1.7 Stand-by management cable......................................................................43

3 IUC180/IUC150 SOFTWARE..............................................................................44

3.1.1 Software Architecture .................................................................................45

3.1.2 Secure management of software................................................................46

3.1.3 Operating system........................................................................................47

3.1.4 TELIUM MANAGER on iUC180 only..........................................................48

3.1.5 Software downloading ................................................................................50

3.1.6 Development station (iUC180)....................................................................53

4 TERMINAL MANAGEMENT SYSTEM (IUC180)................................................55

4.1 Introduction.....................................................................................................55

4.2 Basic functions...............................................................................................55

4.3 Advanced functions .......................................................................................55

4.4 Customers savings with Ingenico TMS solution .........................................55

5 INSTALLATION PROCEDURE IN KIOSKS .......................................................56

5.1 Kiosk mechanical requirements....................................................................56

5.2 General installation recommendations.........................................................56

5.3 Kiosk suggested layouts for iUC150 iUR250 IUP250...................................57

6 ASSEMBLY PROCEDURE FOR IUC180 AND IUC150 .....................................57

6.1 Kiosk minimum volume for iUC180...............................................................57

6.2 Kiosk minimum volume for iUC150...............................................................58

6.3 Kiosk preparation for iUC150 or 180 new installation.................................59

6.4 Installing the iUC150/iUC180 in new kiosk...................................................60

6.5 Connecting the iUC180 or 150 to the kiosk ground.....................................61

Kiosk mechanical requirements..............................................................................61

7 MAINTENANCE..................................................................................................62

7.1 Configuration..................................................................................................62

7.2 Operating life...................................................................................................62

8 CLEANING INSTRUCTIONS..............................................................................62

9 DISASSEMBLING THE PRODUCTS ACCORDING TO WEEE DIRECTIVE.....63

9.1 iUC180 End-of–life disassembly instructions..............................................63

9.2 IUC150 End-of–life disassembly instructions..............................................65

10 STANDARDS...................................................................................................67

10.1 iUC 150 Electrical consumptions ...............................................................67

10.2 iUC 180 Electrical consumptions ...............................................................67

10.3 Temperature and humidity..........................................................................67

10.4 Environmental specification continued.....................................................67

10.5 EC standard compliance marking..............................................................68

10.6 IC statements...............................................................................................68

10.7 FCC Statement.............................................................................................69

10.8 Environment (WEEE, Batteries and Packaging) .......................................70

1 GENERAL

1.1 DEFINITION OF ACRONYMS

EMC Electro Magnetic Compatibility

EVA European Vending Association

GND Ground

GPRS

General Packet Radio Service

GSM Global System for Mobile communications

LCD Liquid Crystal Display

LLT Local Loading Tool

MDB Multi Drop Bus

RAM Random Access Memory

RS232

Recommended Standard 232. A standard for serial binary communications

SAM

Secure Access Module – the chips storing the electronic cash register in a

stored value scheme such as Moneo, Proton or VISA Cash.

SMA SubMiniature version A

USB Universal Serial Bus

1.2 IUC150 & IUC180 PAYMENT SOLUTION

PRESENTATION

The iUN series is the new range of Ingenico UNattended (iUN) devices to offer

payment into any kiosk through any segments (petrol, transport, vending, parking,

etc.).

The modules for contactless reading are:

• iUC150,

• iUC180.

These compact devices are designed to fit everywhere, thanks to an easy

installation, respectful of EVA standard.

Usage can be indoor or outdoor, resisting to harsh environment.

Remarks:

• For iUC180, additional peripherals can be added to build a complete solution

such as printer or bar code reader. Ingenico does not provide these devices so

far but they can be connected to the iUC180 (through USB, or RS232).

• Ingenico is also offering other iUN modules dedicated to PINPad like iUP250

or Hybrid Card Reader iUR250.

• The iUC150 is the preferred contactless peripheral for the iUP250+iUR250

system.

The iUN series is the next generation of Ingenico leveraging of experience from

previous product ranges, i9500 series or CAD30 series, to renew your experience of

unattended payment.

1.2.1 Diagram of iUC180 & iUC150 connectivity and

communications

iUC150

display

Contactless

cards

Power supply

Main Power

sup

ply

Ethernet

4 USB host

Serial port com0

GSM / GPRS

Serial port com0

USB device

MDB master

Serial port com2

(Option)

Bluetooth

1USB device

12 – 30 V Max 3A

MDB slave

Contactless

cards

iUC180

1.2.2 Services

Training

− Installation and exploitation

− Softwares

− OEMC/M²OS development ( days)

− EMV Level 2 package (2 days)

− Development workstation SDK

Support

− Hot-line support

− Technical assistance

After-Sales Service

− Fixed cost repair of iUN products

Downloading server centre

− User licence

− Installation and commissioning

− User training

− Hot-line support

− Technical assistance

Softwares / Licences

− User licence for local loading tool, LLT

− User licence for applications software

− User licence for M²OS

− Licence for software signature tool, SAT

− Licence for "EMV Level 2 package "

− Licence for TCP/IP

− …

1.3 DESCRIPTION OF MODULES

1.3.1 iUC180

Front view Rear view

1.3.1.1 Technical Hardware characteristics

iUC180 technical characteristics:

Mass 680 g

Dimensions

250 x 120 x 64.5 mm (67 with cable protection)

(height x width x depth)

Operating conditions

Functional temperature* -20°C, +65°C

Max relative humidity 85% at 55°C, non-condensing

Maximum backward leaning No constraints

Power Supply

12 – 30 V Max 3A

Platform

Telium2

Memory 16 Mb SDRAM and 128 Mb Flash

Functionality

Contactless cards reading

128 x 64 graphic display

RGB Backlight

Buzzer

RGB LED internal status indicator

1 Maintenance Button

µSD

2 SAMs

1 SIM (optional)

1 Jack for wake-up

Wake-up mechanism on RS232 connectors

Link

Ethernet

GSM/GPRS (optional)

Bluetooth (optional)

4 USB host (1.2 A total max)

1 USB device

2x RS232 (1 optional)

MDB slave

MDB Master (optional)

Storage conditions

Storage temperature -20°C,+65°C

Max relative humidity 85% at 55°C, non-condensing

1.3.1.2 iUC180 output connectors description

COM 0

MDB

Slave

MDB

Master

SIM

2 SAMs

µSD

COM2

Link

Wake-Up

Link

1.3.1.2.1 Ethernet

The iUC180 contactless Reader unit can be connected to Ethernet. The connector

type is shielded RJ45.

The Ethernet cable is standard and not provided.

The Ethernet cable must be shielded.

Ethernet

USB

Device

USB

Hosts

Bluetooth

Antenna

GPRS

Antenna

LLT/Maintenance

LED

LLT/Maintenance

Button

1.3.1.2.2 USB device

The IUC180 contactless reader unit can be connected by type B USB.

1.3.1.2.3 USB host

The iUC180 contactless reader unit can drive 4 USB accessories. The connector is

standard type A.

The power available is limited to 1.2A Max dispatched between the 4 USB.

1.3.1.2.4 Wake-up mechanism

iUC180 is designed to save power thanks to a “stand-by mode”.

If the stand-by mode is used, use Wake-up mechanism:

- with button connected on jack (optional)

- with Pin 2 of COM0 link & COM2 link

- by pressing the green key on the maintenance keyboard.

Wake-up pin state

Hz (high impedance) Stand-by authorized

Drive to “0” Wake-up / Stand-by unauthorized

The Wake-up pin is drive to “0” by the one asking the wake-up.

It could be driven by iUP250, iUR250 or any devices designed to be compliant (Host

device…).

Contactless

Reader IUC180

IUC180

COM0 & 2

1 – GND

2 – Wake-up

3

4

5

6

HZ => Stand-by

« 0 » => Wake-up

USB

Any devices design to

be compliant.

HZ => Stand-by

« 0 » => Wake-up

1.3.1.2.5 COM0 link

The iUC180 contactless reader unit can be connected to serial port COM0.

The connector type is RJ11.

Pin N° Function

1 GND

2 Wake-up

3 RXD

4 TXD

5 CTS

6 RTS

1.3.1.2.6 COM2 link (optional)

The iUC180 contactless reader unit can be connected to serial port COM2 if the

option is available.

The connector type is RJ11.

Pin N° Function

1 GND

2 Wake-up

3 RXD

4 TXD

5 CTS

6 RTS

1.3.1.2.7 MDB Slave

iUC180 contactless reader unit can be connected by MDB slave. The connector

type is MDB 6 pins (Mini – Fit series 87827 (MOLEX)).

iUC180 is powered on the MDB connectors by power supply 12 to 30V DC (30V

is a maximum).

A ferrite B & F ELECTRONICS CO.,

LTD. ref MD-05-265C or equivalent must be

added on the power cable.

1.3.1.2.8 MDB master (optional)

The iUC180 contactless reader unit can be connected by MDB master if option

available. The connector type is MDB master 8 pins (Mini – Fit series 87827

(MOLEX)).

iUC180 does not support EXE power supply.

A Würth ferrite ref 74271222 or equivalent must be added with two turns on the

cable.

Pin N° Function

1 Vin

2 GND

3 NC

4 MDBS_RXD

5 MDBS_TXD

6 MDBS_COMMUN

Pin N° Function

1 NC

2 NC

3 NC

4 NC

5 MDBM_RXD

6 ISO_GND

7 MDBM_TXD

8 ISO_GND

1.3.1.2.9 Wake-Up Jack

This connector is used for Wake-up mechanism.

Pin N° Function

1 GND

2

HZ Stand-by authorized

“0” Wake-up / Stand-by unauthorized

The specific jack and cable is a spare part, contact commercial service to purchase it.

1.3.1.2.10 Bluetooth (optional)

When the iUC180 contactless reader is ordered with Bluetooth option, it must

be connected to an external Bluetooth antenna.

Ingenico can provide an antenna, or a standard one can be used. This standard

Antenna must have an impedance of 50 Ohm and a maximum gain of 0 dBi.

Ingenico recommended antennas:

Antenna

type

manufacturer model gain impedance Minimum

cable

length

Ingenico

Reference

bipolar EAD

FBTS35024-

SM-ST

0dBi 50ohm 0 192023282

1.3.1.2.11 GPRS (optional)

When the contactless reader unit is provided with GPRS functionality

(configuration upon request), the external antenna is not provided with the unit.

Ingenico can provide an antenna, or a standard one can be used. This standard

Antenna must have an impedance of 50 Ohm and a maximum gain of 3.5 dBi.

The SIM used for GSM functionality must be assigned to SIM slot.

Ingenico recommended antennas:

Antenna

type

manufacturer model gain impedance Minimum

cable

length

Ingenico

Reference

bipolar AMPHENOL 90-00234 1.7dBi 50ohm 0 179900131

bipolar HIRSHMANN

MCA 18 90

MP

2.1dBi 50ohm 2.5m 189968573

bipolar Giga concept

GC300M-

011-2500

2.2dBi 50ohm 2.5m 189963487

1.3.1.3 SAM & µSD Installation

1. Disconnect the iUC180 contactless reader from the main power supply.

2. Open the SAM door by removing the screw.

3. Insert the SAM cards in SAM slot 1 and /or slot 2

4. Insert µSD card in µSD slot

5. Insert SIM card in SIM slot.

6. Slide the SAM door and screw.

SAM cover

Screwed with M2X6 T6

For SAM/SIM cards, take care of cards orientation and do not push in excess the

cards.

After insertion, the cards position is 4 mm out of the products as shown on picture.

1.3.1.4 Buzzer

The buzzer is controlled by application. The frequency depends of software.

1.3.1.5 RGB backlight

The iUC180 has a RGB backlight controlled by applications.

SIM Slot

SAM Slot 2

SAM Slot 1

µSD Slot

Cut angle for

SAM

Cut angle for

µSD card

Cut angle for

GPRS SIM

La page charge ...

Ingenico XKB-IUC18X-RF Manuel utilisateur

Ce manuel convient également à

Ingenico XKB-IUC18X-RF Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents