Ingenico iSMP4 Manuel utilisateur

www.ingenico.com

28-32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35

Ingenico - SA au capital de 47 656 332 / 317 218 758 RCS Nanterre

iSMP4

User Guide

iSPM4_User guide

900025697 R11 000 03/1216

2

Contents

1_Introduction

2_Unpacking

3_Recommendations

3_1 Safety

Sécurité

Sicherheit

3_2 Terminal security

3_3 EC standard compliance marking

3_4 FCC & IC Compliance

3_4_1 Federal Communications Commission

(FCC) Statement

3_4_2 Industry Canada (IC) Statement

3_4_3 FCC/IC RF Exposure (SAR) Statement

3_5 Symbol

3_6 Main Characteristics

4_Installation and connection

4_1 Functional description

4_2 Battery insertion

4_3 Charging iSMP4

4_4 Terminal in its environment

4_5 Power on / off and wakup / sleep

4

5

8

16

7

6

9

11

13

14

19

20

21

iSPM4_User guide

900025697 R11 000 03/1216

3

4_6 Connection

4_6_1 USB cable connection

4_7 Payment Integration with Bluetooth

5_Daily use

5_1 Getting started with iSMP4

5_2 iSMP4 keypad functions

5_3 Adjusting the contrast

5_4 Barcode reader

5_5 Card insertion

5_5_1 Swiping a card

5_5_2 Inserting a chip card

5_5_3 Reading Contacless (Optional)

6_Maintenance

6_1 Cleaning of the terminal

Entretien du terminal

Wartung von Endgeräte

6_2 Transport and storage

6_3 Troubleshooting

6_4 End of life

Fin de vie

Produktentsorgung

21

27

22

25

26

21

22

23

24

25

27

28

29

30

iSPM4_User guide

900025697 R11 000 03/1216

4

1_Introduction

Thank you for choosing an Ingenico payment terminal.

We recommend you to read carefully this installation guide : It gives

you the necessary information about safety precautions, unpacking,

installation, and maintenance of your terminal.

WARRANTY / SECURITY

Use only accessories delivered with the terminal, and have

maintenance performed by authorized personnel.

Failure to comply with these instructions will void the

manufacturer’s warranty.

This symbol indicates an important Warning.

This symbol indicates advice.

ISMP4 is battery powered, use only Ingenico parts for replacement

iSPM4_User guide

900025697 R11 000 03/1216

5

2_Unpacking

iSMP4 terminal

PSU for battery charging

USB-C câble

The User’s Guide and the EU declaration of conformity might be

included optionally.

Products of ISMP4 range are named : IMP6xx

Depending on the model, the following items are included in the iSMP4

box (including optional accessories) :

ADVICE

Carefully preserve the product packaging; it must be re-

used when the terminal is shipped.

Battery pack

WARNING

The power supply unit provided is specially designed for

this Ingenico terminal. Do not use any other power supply.

Using a power supply with apparently similar voltage/

current characteristics may damage your terminal.

iSPM4_User guide

900025697 R11 000 03/1216

6

AVERTISSEMENT

Dans le cas où vous choisiriez d’utiliser un bloc alimentation,

assurez-vous de n’utiliser que le bloc d’alimentation qui a

été conçu spécialement pour votre terminal. N’utilisez pas

d’autre bloc d’alimentation. L’emploi d’un bloc d’alimentation

présentant des caractéristiques apparemment similaires de

tension/intensité peut endommager votre terminal.

WARNHINWEIS

Nur das Netzteil, das speziell für Ihr Gerät ausgelegt wurde,

benutzen. Benutzen Sie kein anderes Netzteil. Die Benutzung

eines Netzgeräts mit scheinbar ähnlicher Spannung/

Stromstärke kann zur Beschädigung Ihres Terminals führen.

ADVICE

Your terminal is delivered with a clear, protective lm. We

advise that you do not remove this protective lm to ensure

optimum protection of your terminal. It will not alter the use

of the terminal.

3_Recommendations

3_1 Safety

The iSMP4 is tted with a lithium battery, which is not accessible

to the user. Only a qualied technician is authorized to open the

unit and change the battery.

Lithium back-up battery

The iSMP4 is installed with a battery specially designed for this

terminal.

Main battery

Use only the appropriate chargers and batteries listed in the

Ingenico catalog.

Do not short-circuit the battery.

Do not attempt to open the battery door.

Used batteries must be disposed of at the appropriate sites.

Provide an electrical outlet:

Electrical power supply network

Located near the equipment and easily accessible;

That meets the standards and regulations in the

country of use;

iSPM4_User guide

900025697 R11 000 03/1216

7

The terminal ISMP4 can be connected to a power

distribution system of the IT type for Norway.

Sécurité

ISMP4 est équipé d’une batterie au lithium inaccessible à

l’utilisateur. Seul un technicien qualié est autorisé à ouvrir le

bloc et à changer ce composant.

Batterie de sauvegarde au lithium

ISMP4 est équipé d’une batterie spéciquement conçue pour ce

terminal. Ce composant n’est pas accessible par l’utilisateur.

Batterie principale

N’utilisez que les chargeurs et batteries prévus gurant dans

le catalogue Ingenico.

Ne court-circuitez pas la batterie.

N’essayez pas d’ouvrir le terminal.

Les batteries usagées doivent être déposées aux endroits de

récupération prévus.

Ne laissez pas votre terminal sans surveillance à l’intérieur

d’un véhicule.

Dans le cas où la batterie devait être remplacée, cette

opération devrait être réalisée par un technicien qualié.

Utilisation du réseau électrique (accessoire)

Située à proximité du matériel et facile d’accès

conforme aux normes et aux réglementations en vigueur

dans le pays d’utilisation

ISMP4 peut être connecté aux réseaux de distribution

électrique de type IT pour la Norvège.

AVERTISSEMENT

Il existe un risque d’explosion dans les cas suivants :

remplacement incorrect de la batterie, exposition de la

batterie près d’une source de chaleur ou mise de la batterie

au feu.

WARNING

The terminal could explode if the battery is replaced

with an incorrect type.

Use the specied charger only.

Do not disassemble, throw in water or expose to high

temperature.

Dispose of used batteries according to the instructions.

iSPM4_User guide

900025697 R11 000 03/1216

8

3_2 Terminal security

Sicherheit

ISMP4 ist mit einer Lithium-Batterie ausgestattet, mit der

der Benutzer nicht in Berührung kommen darf. Nur ein

qualizierter Techniker ist berechtigt, das Gerät zu öffnen und

diese Komponente auswechseln.

Lithium-Akku

ISMP4 ist mit einem speziell für dieses Terminal bestimmten

Akku ausgestattet. Nur ein qualizierter Techniker ist berechtigt,

das Gerät zu öffnen und diese Komponente auswechseln.

AKKU

Verwenden Sie nur die entsprechenden Auadegeräte und

Akkus, die im Ingenico Katalog aufgeführt sind.

Den Akku nicht kurzschliessen.

Nicht versuchen, das Akku-Gehäuse zu öffnen

Leere Batterien sind umweltgerecht zu entsorgen.

ISMP4 im Fahrzeug ohne Überwachung nicht verlassen.

Als Akku verwechseln werden muss, benutzen Sie einen

Tekniker Intervention.

elektrischen Netz

In der Nähe des Geräts bendet und leicht zugänglich

Welche erfüllt die Normen und Vorschriften in den jeweiligen

Ländern

Das Terminal ISMP kann zu einer Energieverteilung der IT-

Typ für Norwegen angeschlossen werden

WARNHINWEIS

Es besteht Explosionsgefahr bei unsachgemmäss entsorgten

oder ins Feuer geworfenen Batterien und Akkus.

When you receive the terminal, check for signs of tampering. It is

strongly advised that you perform these checks on each terminal as

follows:

The keypad is rmly in place

There is no evidence of unusual wires connected to any

ports on your terminal or associated equipment, the chip

card reader, or any other part of your terminal. Such checks

provide warning of any unauthorized modications to your

terminal. Your terminal detects tampering and repeatedly

iSPM4_User guide

900025697 R11 000 03/1216

9

CAUTION

Never ask customers to divulge their PIN. Advise customers

to ensure that they are not being watched when entering

their PIN.

3_3 EC standard compliance marking

"Refer to the EU declaration of conformity"

ashes the message, Alert Irruption! The terminal is locked

and cannot be used. If you observe the Alert Irruption!

message, contact the terminal help desk immediately.

Ensure that access to your terminal is granted only to staff

that have been independently veried as being trustworthy.

3_4 FCC & IC Compliance

FCC & IC has a specic naming.

The references uses for FCC & IC certications for Bluetooth wi

contact less terminals are:

IC Number : 2586D-ISMP4CLBTWI

FCC ID: XKB-ISMP4CLWIBT

The references uses for FCC & IC certications for Bluetooth contact

less terminals are:

IC Number : 2586D-ISMP4CLBT

FCC ID: XKB-ISMP4CLBT

You are cautioned that changes or modications not expressly

approved by the part responsible for compliance could void the user’s

authority to operate the equipment.

3_4_1 Federal Communications Commis-

sion (FCC) Statement

15.21

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

iSPM4_User guide

900025697 R11 000 03/1216

10

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. his equipment generates, uses

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

15.105(b)

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician

for help.

15.19 (a) (3)

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

1) This device may not cause harmful interference and

2) This device must accept any interference received, including

interference that may cause undesired operation of the device.

iSPM4_User guide

900025697 R11 000 03/1216

11

3_4_2 Industry Canada (IC) Statement.

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions:

1) this device may not cause interference, and

2) this device must accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada

applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes:

1) l’appareil ne doit pas produire de brouillage, et

2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

Changes or modications made to this equipment not expressly

approved by (manufacturer name) may void the FCC authorization to

operate this equipment.

3_4_3 FCC/IC RF Exposure (SAR)

Statement.

The iSMP4 terminal has been tested and meets applicable limits for

radio frequency (RF) exposure. Specic absorption rate (SAR) refers

to the rate at which the body absorbs RF energy. The SAR limit is 1.6

watts per kilogram averaged over 1 gram of tissue. Carry the iSMP4 at

least 5mm away from your body to ensure exposure levels remain at

or below the tested levels. Cases with metal parts may change the RF

performance of the device, including its compliance with RF exposure

guidelines in a manner that has not been tested or certied.

L’ISMP4 a été testé et conforme aux limites d’exposition aux

radiofréquences (RF). Le DAS (Débit d’Absorption Spécique) fait

référence au taux d’absorption des tissus humains aux ondes

électromagnétiques. La limite du DAS est de 1,6W/kg en moyenne pour

1 gr de tissu. Garder l’ISMP4 à 5mm de votre corps permet de garantir

un niveau d’exposition inférieur ou égale aux niveaux testés. Des cas

d’utilisation de l’ISMP4 sur pièces métalliques peuvent modier les

performances radio de l’appareil pouvant remettre en cause son DAS.

Ces cas précis ne sont pas testés et certiés.

The ISMP4 complies with the FCC safety requirements for RF exposure

in accordance with FCC rule part §2.1093 and KDB447498 D01 for

portable use conditions.

iSPM4_User guide

900025697 R11 000 03/1216

12

CAUTION

The user is cautioned that any changes or modication

not approved by INGENICO could void user’s authority to

operate the equipment.

In order to meet FCC and Industry Canada RF radiation exposure limits

for general population, this device must only be operated when held

in the hand or in desktop position with a minimum separation distance

of at least 20cm from the user’s body and it must not be collocated or

operated in conjunction with any other antenna or transmitter.

Use of this device with an accessory in order to be worn and operated

on user’s body is strictly prohibited and will invalidate the certications

obtained for FCC and Industry Canada.

An de respecter les directives de la FCC et d’Industrie Canada

concernant les expositions radiofréquence, cet appareil ne doit

fonctionner que tenu dans la main ou sur station d’accueil avec une

distance minimale d’au moins 20cm du corps de l’utilisateur et il ne

doit pas être en colocation ou coopération avec une autre antenne ou

émetteur. L’utilisation de cet appareil avec un accessoire dans le but

d’être porté et fonctionné sur le corps de l’utilisateur est strictement

prohibé et invalidera les certications FCC et Industrie Canada obtenues

L’ISMP4, dans un mode portable de fonctionnement, est conforme

aux exigences de sécurité FCC concernant l’exposition aux ondes

électromagnétiques suivant les règles FCC part §2.1093 et KDB447498

D01

The ISMP4 complies with the IC safety requirements for RF exposure in

accordance with RSS-102 Issue 5 for portable use conditions.

L’ISMP4, dans un environnement portable, est conforme aux exigences

de sécurité IC concernant l’exposition aux ondes électromagnétiques

suivant les règles RSS-102 Issue 5

iSPM4_User guide

900025697 R11 000 03/1216

13

3_5 Symbol

The following symbols area used on the terminal and the power supply:

The CE symbol indicates that the product meets the

requirements of the applicable EC directives. It is a mandatory

HYPERLINK "http://en.wikipedia.org/wiki/Certi cation_mark" \o

"Certi cation mark" conformity symbol for certain products sold within

the HYPERLINK "http://en.wikipedia.org/wiki/European_Economic_

Area" \o "European Economic Area" European Economic Area (EEA).

The UL symbol appears on end-user products and complete

components suitable for factory and  eld installation. All

component suitable carrying these symbols are covered

by our Follow-Up Services program to determine that

component continue to be manufactured in compliance with UL’s safety

requirements.

The RCM symbol indicates compliance with the Australian

Communications and Media Authority’s (ACMA) regulatory

arrangements for telecommunications, radio, EMC, and

electromagnetic energy (EME).

This TÜV symbol indicates that a component suitable

was examined by experts and there are no safety

concerns.

Waste of Electrical and Electronic Equipment (WEEE) symbol

indicates that when the end-user discards this product, it

must be sent to separate collection facilities for recovery and

recycling.

Mark indicating a power supply meets the level VI

requirements.

This symbol indicates that the terminal operates with

continuous voltage. It is followed by the ratings (voltage

and current for instance).

This symbol indicates that the terminal operates with

alternative voltage. It is followed by the ratings (voltage and

current for instance).

iSPM4_User guide

900025697 R11 000 03/1216

14

Double insulated or class 2 electrical appliances are products

that have been designed in a way so as not to require a safety

connection to electrical earth (These products must NOT have

a safety connection to Earth).

Indoor use symbol.

3_6 Main Characteristics

The main technical characteristics of the Ingenico iSMP4 terminal are :

133 x 72 x 19 mm

Battery

(Batterie, Akku)

2000 mAh Li-ion

100-240VAC / 50-60 Hz -

Class II equipment

Electrical mains network

(Réseau de distribution électrique,

Elektrische Stromnetz)

Mass

(Poids, Gewicht)

Dimensions

(dimensions, Maße)

187 g

RAYONNEMENT LASER, NE PAS REGARDER DANS

LE FAISCEAU, APPAREIL À LASER DE CLASSE 2

LASER RADIATION, DO NOT STARE INTO BEAM,

CLASS 2 LASER PRODUCT

iSPM4_User guide

900025697 R11 000 03/1216

15

Operating conditions

85% at +40°C

Connections on terminal

(Connexions sur le terminal,

Terminalanschluss)

USB-C serial link

Ambient temperature (Température

ambiante, Raumtemperatur)

Max relative humidity

(Humidité relative maxi,

Max. Relative Luftfeuchte)

from 0°C to +40°C (battery

charging)

from -10°C to +45°C (non

charging)

Power supply unit

2Amps (traveller power sup-

ply provided by Ingenico)

Weight

(Poids, Gewicht)

Power

(Puissance, Leistung)

100 g

Storage conditions

Storage temperature

(Température de stockage,

Lagertemperaturen)

Max relative humidity

(Humidité relative maxi,

Max. relative Luftfeuchte)

-20°C,+55°C

85% at +55°C

iSPM4_User guide

900025697 R11 000 03/1216

16

4_Installation and connection

4_1 Functional description

The ISMP4 is a secure EMV Chip & PIN mobile payment holster. The

ISMP4 allows mobile merchants to convert their Smartphone or tablet

into a powerful & secure POS solution.

iSPM4_User guide

900025697 R11 000 03/1216

17

Magnetic

stripe reader

1

on/off and wake

up/sleep button

2

Bar code scanner

activation buttons

3

4

menus navigation

keys

5 USB-C connector

6

Display

iSPM4_User guide

900025697 R11 000 03/1216

18

8

Smart Card Reader

7

Bar code scanner

Magnetic

stripe reader

1

iSPM4_User guide

900025697 R11 000 03/1216

19

4_2 Battery insertion

CAUTION

Before starting, turn off the terminal and disconnect the

USB cable.

Pull up battery door

Insert contact side  rst

iSPM4_User guide

900025697 R11 000 03/1216

20

4_3 Charging iSMP4

Before using the iSMP4 for the  rst time, charge it for

about four hours. Subsequent charges take three hours to

reach maximum charge.

Fast charging : Use the USB-C power supply (provided by

Ingenico)

Slow charging : Use the USB-C / USB-A adapter cable

(provided by Ingenico)

CAUTION

Operating the iSMP4 for the  rst time without the AC

adapter, and without fully charging the backup battery

might result in loss of data stored in RAM memory. When the

main battery is removed, the backup battery retains date

and time for at least 10 minutes.

A battery indicator is displayed on the iSMP4 screen,

indicating the amount of charge.

Warning

There is a risk of explosion if the battery is incorrectly

replaced or is discarded in a  re. Please dispose of used

batteries by following the instructions described in section

6.4.

A red LED lights

when the battery

level is too low

La page charge ...

Ingenico iSMP4 Manuel utilisateur

Ingenico iSMP4 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents