Mellanox Technologies SwitchX-2 MSX1024B-2BRS Manuel utilisateur

www.mellanox.com

SwitchX®-2 60 Port Ethernet Switch System

Hardware User Manual

P/N: MSX1024B-1BFS, MSX1024B-1BRS, MSX1024B-2BFS, MSX1024B-2BRS

Rev 1.1

Document Number: 4083

Rev 1.0

Mellanox Technologies

2

Mellanox Technologies

350 Oakmead Parkway Suite 100

Sunnyvale, CA 94085

U.S.A.

www.mellanox.com

Tel: (408) 970-3400

Fax: (408) 970-3403

Mellanox Technologies, Ltd.

Beit Mellanox

PO Box 586 Yokneam 20692

Israel

www.mellanox.com

Tel: +972 (0)74 723 7200

Fax: +972 (0)4 959 3245

Mellanox®, Mellanox logo, BridgeX®, ConnectX®, CORE-Direct®, InfiniBridge®, InfiniHost®, InfiniScale®,

MLNX-OS®, PhyX®, SwitchX®, UFM®, Virtual Protocol Interconnect® and Voltaire® are registered trademarks of

Mellanox Technologies, Ltd.

Connect-IB™, FabricIT™, Mellanox Open Ethernet™, MetroX™, MetroDX™, ScalableHPC™, Unbreakable-Link™ are

trademarks of Mellanox Technologies, Ltd.

All other trademarks are property of their respective owners.

NOTE:

THIS HARDWARE, SOFTWARE OR TEST SUITE PRODUCT (“PRODUCT(S)”) AND ITS RELATED

DOCUMENTATION ARE PROVIDED BY MELLANOX TECHNOLOGIES “AS-IS” WITH ALL FAULTS OF ANY

KIND AND SOLELY FOR THE PURPOSE OF AIDING THE CUSTOMER IN TESTING APPLICATIONS THAT USE

THE PRODUCTS IN DESIGNATED SOLUTIONS. THE CUSTOMER'S MANUFACTURING TEST ENVIRONMENT

HAS NOT MET THE STANDARDS SET BY MELLANOX TECHNOLOGIES TO FULLY QUALIFY THE

PRODUCTO(S) AND/OR THE SYSTEM USING IT. THEREFORE, MELLANOX TECHNOLOGIES CANNOT AND

DOES NOT GUARANTEE OR WARRANT THAT THE PRODUCTS WILL OPERATE WITH THE HIGHEST

QUALITY. ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT

ARE DISCLAIMED. IN NO EVENT SHALL MELLANOX BE LIABLE TO CUSTOMER OR ANY THIRD PARTIES

FOR ANY DIRECT, INDIRECT, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES OF ANY KIND

(INCLUDING, BUT NOT LIMITED TO, PAYMENT FOR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY FROM THE USE OF THE PRODUCT(S) AND RELATED

DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

3

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.2 Serial Number and Product Version Information . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 2 Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Chapter 3 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.1 Switch Platform Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.2 Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.2.1 System Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.2.2 Fan Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3.2.3 Power Supply Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3 Air Flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.4 SFP+ Cable Power Budget Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.5 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.5.1 Port Connector Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.5.2 Port Speed Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.5.3 Management and Firmware Updating Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.5.4 Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Chapter 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.1 Installation Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.2 Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.3 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.4 Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.5 Grounding the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.6 Power Connections and Initial Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.7 Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4.8 Configuring the Switch the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.9 Managed (Internally Managed) Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.10 Rerunning the Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.11 Connecting to the Switch Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.11.1 Starting a Remote Connection to the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.12 Starting an SSH Connection to the Switch (CLI) . . . . . . . . . . . . . . . . . . . . . . . . 42

Chapter 5 Extracting and Inserting FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.1 Extracting and Inserting the Power Supply Unit . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.2 Extracting and Inserting the Fan Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Rev 1.1

Mellanox Technologies

4

Chapter 6 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

6.1 Splitting the Data Stream Using Breakout (Fanout) Cables . . . . . . . . . . . . . . . . 47

6.2 Cable Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Chapter 7 Switch Shut Down Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Chapter 8 Disassembly of the Switch from the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

8.1 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

8.2 Upgrading Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Chapter 9 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Appendix A Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

A.1 Approved Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

A.2 EMC Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

A.3 China CCC Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Appendix B SFP+ Removal Tool Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Appendix C QSFP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Appendix D SFP+ Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix E RJ-45 CONSOLE and I2C Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Appendix F Accessory and Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Appendix G Avertissements de sécurité d’installation (French) . . . . . . . . . . . . . . . . . . 65

Appendix H Installation - Sicherheitshinweise (German) . . . . . . . . . . . . . . . . . . . . . . . 69

Appendix I Advertencias de seguridad para la instalación (Spanish) . . . . . . . . . . . . 72

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

5

List of Figures

Figure 1: Connector Side View of the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Figure 2: Pull Out Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Figure 3: QSFP Switch System Power and Connector Side Panels . . . . . . . . . . . . . . . . . . . . . . .14

Figure 4: System Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Figure 5: Fan Status LED Connector Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Figure 6: Fan Status LED Power side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Figure 7: Power Status LED Connector Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Figure 8: Power Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Figure 9: PS Unit Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Figure 10: Bad Port LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Figure 11: Port LED to Port Location Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Figure 12: Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Figure 13: Component Airflow Mismatch (Wrong) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Figure 14: Port Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Figure 15: Top and Bottom QSFP Port Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Figure 16: Top and Bottom SFP+ Port Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Figure 17: Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Figure 18: Rack Rail Kit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Figure 19: Placement of Switch in Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Figure 20: Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Figure 21: Screwing on the Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Figure 22: Inserting the Caged Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Figure 23: Slide the Rail into the Rail Slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Figure 24: Status LEDs 5 Minutes After Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Figure 25: Two Power Inlets - Electric Caution Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Figure 26: Console Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Figure 27: Fan and PS unit Air Flow Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Figure 28: Power Supply Unit Extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Figure 29: PS Unit Pulled Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Figure 30: Air Flow Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Figure 31: Fan Module Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Figure 32: Breakout or Fanout Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Figure 33: Port Splitting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Figure 34: SFP+ Cable Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Figure 35: QSFP Connector Male and Female Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Rev 1.1

Mellanox Technologies

6

Figure 36: Rear View of Module With Pin Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

7

List of Tables

Table 1: Revision History Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Table 2: Reference Documents and Web Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Table 3: System Status LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Table 4: Fan Status LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Table 5: PS Unit Status LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Table 6: Bad Port LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Table 7: Port Connector Physical and Logical Link Assignments for Ethernet . . . . . . . . . . . . . . .20

Table 8: Air Flow Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Table 9: Installation Kit According to Rack Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Table 10: Serial Terminal Program Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Table 11: Configuration Wizard Session - IP Configuration by DHCP . . . . . . . . . . . . . . . . . . . . . .37

Table 12: Configuration Wizard Session - IP Zeroconf Configuration . . . . . . . . . . . . . . . . . . . . . .39

Table 13: Configuration Wizard Session - Static IP Configuration . . . . . . . . . . . . . . . . . . . . . . . . .40

Table 14: SX1024 Specification Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Table 15: RJ-45 CONSOLE Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Table 16: RJ-45 I2C Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Table 17: OPNs for Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Rev 1.1

Mellanox Technologies

8

Revision History

Table 1 - Revision History Table

Date Revision Description

March 2013 1.1 Added SFP+ cable and module removal tool to contents.

Added figures to appendix.

Added note use only FCC compliant Ethernet cables.

Added note concerning USB insertion

Replaced wizard tables from MLNX-OS doc

added section opening the CLI

January 2013 1.0 Initial Release

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

9

About this Manual

This manual describes the installation and basic use of the Mellanox switch which is based on the

SwitchX®-2 switch device.

Intended Audience

This manual is intended for users and system administrators responsible for installing, running,

and managing switch platforms.

The manual assumes familiarity with the Ethernet specification.

Related Documentation

Additional Documentation available from Mellanox:

All of these documents can be found on the Mellanox Website at www.mellanox.com. They are

available either through the product pages www.mellanox.com  Products  InfiniBand/VPI

Switch Systems or through the support page with a login and password.

Conventions

Throughout this manual, the name SX1024 and the term switch are used to describe the 60 port

SFP+/QSFP switch unless explicitly indicated otherwise.

The following icons are used throughout this document to indicate information that is important

to the user.

Table 2 - Reference Documents and Web Sites

Document Name Description

SwitchX®-2 Switch Hardware Installation

Guide

The Installation Guide contains instructions for Installation in a rack and initial-

ization of the switch platform. This document can be found on the product web

page.

SwitchX®-2 Switch Product Hardware

Release Notes

For possible hardware issues see the switch support product page. This

document can be found on the support web page for this product.

This requires a customer support login. Look up the relevant SwitchX®-

based switch system/series release note file.

Mellanox MLNX-OS® Software User

Manual

This document contains information regarding configuring and manag-

ing Mellanox Technologies Switch Platforms.

MLNX-OS® Software Command Ref-

erence Guide

Command Reference Guide for MLNX-OS® listing all of the commands

available through MLNX-OS® with explanations and examples.

This icon makes recommendations to the user.

This icon indicates information that is helpful to the user.

Rev 1.1

Mellanox Technologies

10

Abbreviations

– Used to indicate a 4X port running at 56Gb/s

Mellanox Part Numbering Legend

This icon indicates a situation that can potentially cause damage to hardware or soft-

ware.

BEWARE! This icon indicates a situation that can potentially cause personal injury or

damage to hardware or software.

Place Field Decoder

M Mellanox Technologies

SX System Type SwitchX® switch Family

P Data Transfer Protocol 1 = Ethernet

R Size of box 0 = 1U

1 = 1.5U

2 = 2U

FF 40 Gb/s equivalent

throughput

16 = 640Gb/s

24 = 960Gb/s

35 = 2880 Gb/s Light version of the Management software

36 = 2880 Gb/s

C Data Rate X = 10Gb/s Ethernet B = 40Gb/s Ethernet

- Separator

P # Power Supplies 0=0, 1=1, 2=2....

M Depth of the Unit S = standard depth, B = short depth

Y Air Flow direction R= Connector side to Power side airflow 

F= Power Side side to Connector side airflow

R Chip Generation R – SwitchX

S – SwitchX-2

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

11

1 Overview

The SX1024 Ethernet switch family provides the highest-performing fabric solution in a 1U form

factor by delivering up to 1.152 Gb/s of non-blocking throughput to High-Performance Comput

-

ing (HPC), high frequency trading and Enterprise Data Centers (EDC), with ultra-low latency. It

has 48 10GbE ports that when connected to 10GbE based servers, provides a unique non-block

-

ing solution for Ethernet Data-Centers.

Figure 1: Connector Side View of the Switch

1.1 Features

• Based on Mellanox SwitchX-2

• Supports 48 SFP+ ports of 10 GbE

• Supports 12 QSFP ports of 40 GbE Upgradable with a license to 56 GbE

• 2x 10/100/1000BASE-T RJ-45 Ethernet port

• 1x RS232 RJ-45 Console connector

• 1x USB connector

• 1 + 1 redundant 300W AC/DC hot swappable Power supplies

• 3 + 1 redundant fans ordered in two fan units (Support Air in/out)

• On board Temperature monitoring

• Reset Push button on front panel

• Various status LEDs

• 19” rack mountable chassis, 1U with redundant power supplies and Fan units

1.2 Serial Number and Product Version Information

The serial number and the MAC for the switch are found on the pull out tab below the Mellanox

logo on the right side of the Connector side panel. The MAC for the Management PC is also on

this tab. This MAC is for the mgmt0 management interface (the top Ethernet port). The second

interface mgmt1 has the next consecutive MAC. On this switch the mgmt1 interface is found on

the power side on the left side.

RST

UID

S

X

1

0

2

4

M

G

T

C

O

N

S

O

L

M

e

l

a

n

o

x



OverviewRev 1.1

Mellanox Technologies

12

Figure 2: Pull Out Tab

SX1024

Mellanox

6059

S/N:M T1244X03494

P/N:M SX1024B‐1BFS

MAC:0002C9020040

MGTMAC:

00:02:C9:11:A2:01

Rev:A1

244X6511240006

Pull out tab

mgmt0

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

13

2 Ethernet Ports

This Ethernet switch system supports 48 SFP+ ports, 12 QSFP ports and maintains a 4:1 ratio.

Each SFP+ port is capable of 10GbE/1GbE port speeds. Up to 24 SFP+ ports are capable of 1/2/

4/8G FC. Ports 1-12 are grouped as FC ports as well as ports 38-48.

All Ethernet ports can be manually configured through the CLI management interface.

Each of the 12 QSFP ports is capable of up to 40GbE, upgradable to 56 GbE with a license, as

well as 10GbE with a QSA QSFP to SFP+ adapter or QSFP to SFP+ Mellanox cables.

Each of the 48 SFP+ ports is capable of up to 10GbE.

40 GbE and 56 GbE are only guaranteed to work with approved cables and modules.

Basic OperationRev 1.1

Mellanox Technologies

14

3 Basic Operation

3.1 Switch Platform Hardware Overview

Figure 3 shows the power side panel view of the switch. The figure shows the hot-swap power

supply locations and the hot-swap fan modules, and an I2C banana connector.

The figure also shows the connector side panel views of the internally managed switch. The fig-

ure shows port configurations for the switch systems. Managed systems have 2 – Ethernet RJ-45

connectors for management, 1 – RJ-45 connector for connecting to a host PC, 1 – USB connec

-

tor. All switches have various status LEDs for on site switch status information.

Figure 3: QSFP Switch System Power and Connector Side Panels

3.2 Status LEDs

3.2.1 System Status Indicators

The System Status Indicators are located to the left of the connectors on the connector side panel,

and on the power side at the far right. Both of these LEDs give identical information.

Figure 4: System Status Indicators

!

OK

!

OK

!

OK

!

OK

Mellanox

SX1024

RST

UID

Mellanox

605958575655545352515049

PS

Power Side Panel

Connector Side Panel

Power side 

status LED

Connector side 

status LED

Green – OK

Yellow – a fault in the

system

Red – Major Fault or

Fatal Error

Led Color shows the

switch status

RST

UID

PS

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

15

The system status indicators should display as follows:

• when the switch is plugged in, within five minutes the STATUS LED should light up

green

• the FAN LED should light up green. If the FAN LED shows red, troubleshoot the fan

module.

See “Troubleshooting” on page 52.

Table 3 shows the system status LED assignment.

As long as there is power to the switch (one PS unit is connected), and the switch is

booted up and running, the status LED should be green.

If the STATUS LED shows red after five minutes, unplug the switch and call your

Mellanox representative for assistance.

If the switch shuts down due to over temperature, unplug the switch, wait 5 minutes

and replug in the switch. For more information See “Troubleshooting” on page 52.

Table 3 - System Status LED Assignments

LED Configuration STATUS/ System Health LED

Solid Green OK – The system is up and running.

Flashing Green The system is booting up. This assignment is valid on managed systems only.

Solid Yellow To be implemented in a future SW release.

Solid Red Major Error – Possible damage can result to the switch. Turn off immediately.

e.g. bad firmware, can’t boot, overheated. If the system is booting up, it can take

up to 5 minutes for the status led to change to green.

Off Off – The system has no power.

RST

UID

PS

Basic OperationRev 1.1

Mellanox Technologies

16

3.2.2 Fan Status Indicators

The indicator is located to the left of the connectors on the connector side panel.

Figure 5: Fan Status LED Connector Side

The LED indicator on the Fan Module is on the right side of the module.

Figure 6: Fan Status LED Power side

Table 4 shows the fan status LED assignment.

Table 4 - Fan Status LED Assignments

LED Configuration FAN LED

Solid Green OK – All fans are up and running.

Solid Red Error – One or more fans is not operating properly. The system should be powered

down and troubleshoot the fan module.

Off Off – The fan unit is not receiving any power. Check that the fan unit is properly

and completely inserted.

RST

UID

PS

!

This is a two color LED

Fan air flow direction

indicator

UID

RST

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

17

3.2.3 Power Supply Status Indicators

The indicator is located to the left of the connectors on the connector side panel.

Figure 7: Power Status LED Connector Side

Figure 8: Power Side Panel

Each PS unit has a single 2 color LED on the right side of the PS unit, that indicates the internal

status of the unit.

All fans must be operating while the power supply is plugged in.

If the switch shuts down due to over temperature, unplug the switch, wait 5 minutes

and replug in the switch. For more information See “Troubleshooting” on page 52.

RST

UID

PS

These are two color LEDs

Green — OK

Red — Major fault

Off — No power

!

OK

!

OK

!

OK

!

OK

Mellanox

Primary Power Supply Unit

Fan Units

PS unit 1 status LED

Fan status LEDs

Basic OperationRev 1.1

Mellanox Technologies

18

Figure 9: PS Unit Status LEDs

Table 5 shows the power supply unit status LED assignment.

3.2.3.1 Bad Port LED

Figure 10: Bad Port LED

The Bad Port indicator is located on the left side of the connector side panel of the unit. Table 6

shows the fan status LED assignment.

Table 5 - PS Unit Status LED Assignments

LED Color Status

Solid Green OK – The Power supply is delivering the correct voltage – 12VDC.

Solid Red Error – The PS unit is not operational.

Off Off – There is no power to the system (neither PS unit is receiving power). If one

PS unit is showing green and the second PS unit is unplugged it will show a red

indication.

This is a two color LED

Power supply fan air flow

direction indicator

RST

UID

PS

This is a one color LED

Flashing Orange — received symbol error

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual Rev 1.1

Mellanox Technologies

19

This LED lights up when one or more ports is receiving a symbol error. The LED immediately

goes off until the next symbol error is received.

3.2.3.2 UID LED Switch Identifier

The UID LED is a debug feature that lights a blue LED on the switch connector side panel for

ease in finding a particular switch.

3.2.3.3 Port Connector LED Indicators

The SFP+ ports come three rows to a column. The LEDs refer to the ports according to the color

coding in

Figure 11.

Figure 11: Port LED to Port Location Assignment

Table 6 - Bad Port LED Assignments

LED Configuration Description

Off OK – No symbol errors have been received in last few seconds.

Flashing Orange Error – One or possibly more ports have just received a symbol error

Possible causes are:

• Bad cable

• Bad connection

• Bad connector

43

44

45

46

47

48

49

50

49

43 44 45 47 4846

Basic OperationRev 1.1

Mellanox Technologies

20

Figure 12: Port LEDs

3.3 Air Flow

These switches can come with two air flow patterns. The two patterns are:

• Connector side inlet to power side outlet

• Power side inlet to connector side outlet

The air flow is specified in the product model number. See “Mellanox Part Numbering Legend”

on page 10.On the PS unit and fan modules the air flow direction can be seen on the power side

panel. All components need to have the same air flow. A mismatch in the air flow will affect the

heat dissipation.

Figure 13 shows a mismatch in component airflow.

Table 7 - Port Connector Physical and Logical Link Assignments for Ethernet

LED Configuration LED Description

Off Physical link is down / Default.

Solid Green Physical link is up with no traffic.

Flashing Green Physical link is up with traffic.

Flashing Orange Physical errors.

All PS units must have the same air flow as the fan modules.

5352515049

Port LEDs

La page charge ...

Mellanox Technologies SwitchX-2 MSX1024B-2BRS Manuel utilisateur

Ce manuel convient également à

Mellanox Technologies SwitchX-2 MSX1024B-2BRS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents