Smooth Fitness 5.65S Manuel utilisateur

Catégorie
Fitness, gymnastique
Taper
Manuel utilisateur
USER’S MANUAL
5.65S MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 300lbs(135kgs).
SERIAL NUMBER (found on frame):
2 5.65S TREADMILL
PRECAUTIONS
For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________
Precautions:
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions
and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
Use the treadmill only as described in this manual.
Place on a level surface, with 6 feet (2 mX1m space) of clearance behind it. Do not place the treadmill on any surface that
blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
When choosing a location for the treadmill be sure that the location and position permit access to a plug.
Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near
water.
Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
Keep children under the age of 12 and pets away from the treadmill at all times.
The treadmill should not be used by persons weighing more than 300LBS (135 Kgs).
Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.
Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in
sandals.
When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.
Always straddle the belt and allow it to start moving before stepping onto the belt.
Always examine your treadmill before using to ensure all parts are in working order.
Allow the belt to fully stop before dismounting.
Never insert any object or body parts into any opening.
Follow the safety information in regards to plugging in your treadmill.
Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.
Never leave the treadmill unattended while it is running.
Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.
Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from
children.
www.smoothfitness.com
3
PRECAUTIONS
Pour réparations futures ou questions connexes :
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________
Précautions:
AVERTISSEMENT : Pour réduire les risques de brûlures, d’incendie, de choc électrique ou de blessures aux personnes, lire les
précautions importantes et l’information suivantes avant de se servir du tapis roulant. Il revient au propriétaire de s’assurer que tous
les utilisateurs de ce tapis ont bien été informés de tous les avertissements et précautions.
Utiliser le tapis seulement comme il est décrit dans ce manuel.
Le placer sur une surface plane, en laissant 2 m (6 pi) d’espace libre en arrière. Ne pas placer le tapis roulant sur une
surface qui bloque les ouvertures d’air.
Pour protéger le plancher ou un tapis de dommages, placer un petit tapis sous le tapis roulant.
Choisir pour le tapis roulant un emplacement et une position qui permettent d’avoir accès à une prise murale.
Garder le tapis roulant à l’intérieur, à un endroit sans humidité ni poussière. Ne pas mettre le tapis roulant dans un garage,
sur une terrasse couverte ou près de l’eau.
Ne pas faire fonctionner le tapis roulant pendant la vaporisation de produits aérosol ou l’administration d’oxygène.
Ne pas laisser les enfants de moins de 12 ans et les animaux s’approcher du tapis roulant.
Le tapis roulant ne doit pas être utilisé par des personnes pesant plus de 300 lbs (135 kg).
Il ne doit jamais y avoir plus d’une personne sur le tapis à la fois. Porter des vêtements d’exercice appropriés pour utiliser
le tapis roulant. Ne pas porter de vêtements lâches qui pourraient être pris dans le tapis roulant. Les vêtements de soutien
athlétiques sont recommandés tant pour les hommes que pour les femmes. Porter toujours des chaussures d’athlétisme.
Ne pas être pieds nus, ou porter seulement des chaussettes ou des sandales lors de l’utilisation du tapis roulant.
Brancher le cordon d’alimentation dans un circuit avec mise à la terre. Aucun autre appareil ne doit être sur le même
circuit.
Toujours enjamber le tapis et le laisser commencer à rouler avant de monter dessus.
Toujours examiner votre tapis roulant avant de l’utiliser pour s’assurer que toutes les pièces fonctionnent correctement
.
Laisser le tapis s’arrêter complètement avant de descendre.
Ne jamais insérer d’objets ou de parties du corps dans une ouverture.
Suivre les directives de sécurité en ce qui concerne le branchement de votre tapis roulant.
Garder le cordon d’alimentation éloigné des roues inclinées et ne pas faire passer le cordon d’alimentation sous votre
tapis roulant. Ne pas faire fonctionner le tapis roulant si le cordon d’alimentation est endommagé ou effiloché.
Débrancher toujours le tapis roulant avant de le nettoyer ou de le réparer.
Toute réparation au tapis doit être effectuée par un réparateur agréé, à moins d’autorisation ou de directives contraires du
fabricant. Le non-respect de ces instructions annulera la garantie du tapis roulant.
Ne jamais laisser le tapis roulant sans surveillance lorsque la clé de sécurité est insérée.
Utiliser la « clé de sécurité » pour faire fonctionner le tapis roulant et s’assurer qu’elle est accrochée aux vêtements des
utilisateurs
Retirer la « clé de sécurité » et la ranger dans un endroit sûr lorsque le tapis roulant n’est pas en fonction. Garder la « clé
de sécurité » hors de la portée des enfants
4 5.65S TREADMILL
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.
www.smoothfitness.com
5
POWER REQUIREMENTS
Alimentation :
UN MAUVAIS BRANCHEMENT DU CONNECTEUR DE MISE À LA TERRE DE L’ÉQUIPEMENT POURRAIT PROVOQUER UN
CHOC ÉLECTRIQUE. EN CAS DE DOUTE, CONSULTER UN ÉLECTRICIEN OU UN RÉPARATEUR QUALIFIÉ POUR SAVOIR
SI LE PRODUIT EST CORRECTEMENT MIS À LA TERRE. NE PAS MODIFIER LA FICHE FOURNIE AVEC LE PRODUIT. SI
ELLE N’ENTRE PAS DANS LA PRISE, FAIRE INSTALLER UNE PRISE APPROPRIÉE PAR UN ÉLECTRICIEN
PROFESSIONNEL.
Ce tapis roulant pourrait être gravement endommagé en cas de changement soudain de tension dans votre alimentation électrique.
Les conditions météorologiques ou la mise sous tension ou hors tension d’autres appareils électriques peuvent provoquer des
pointes de tension, des surtensions ou un brouillage. Pour réduire la possibilité que le tapis soit endommagé, toujours utiliser un
limiteur de surtension (non inclus) avec votre tapis roulant.
Il est possible d’acheter des limiteurs de surtension dans la plupart des quincailleries. Le fabricant recommande un limiteur de
surtension UL 1449 à prise unique comme suppresseur de tension transitoire (TVSS) ayant un taux de suppression de tension de
400 V ou moins et une tension électrique de 110 V C.A., 15 A.
Ce tapis roulant doit être mis à la terre pour réduire le risque de choc électrique. La mise à la terre fournit une voie de moindre
résistance au courant électrique en cas de mauvais fonctionnement du tapis roulant. Ce tapis roulant est équipé d’un cordon
électrique avec un conducteur de mise à la terre et une fiche de mise à la terre. Brancher toujours le cordon électrique dans un
limiteur de surtension et brancher le limiteur de surtension dans une prise appropriée, correctement installée et mise à la terre
conformément à tous les codes locaux et ordonnances.
Ce produit doit être utilisé avec un circuit nominal de 110 volts et à une fiche de mise à la terre qui ressemble à celle illustrée ci-
dessous.
Les prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre ne sont PAS recommandés pour ce produit. Les
prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre pourraient provoquer un mauvais fonctionnement de cet
équipement.
6 5.65S TREADMILL
BEFORE YOU BEGIN
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists
on page 7 for a full count of the parts included. If you are missing any parts or have any questions contact us
directly at 888-800-1167
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit
properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 300LBS (Approx. 135 Kgs). It is
not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown
here. This product is not intended to support users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.
Dismount from the equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately
by actuating the emergency stop for emergency dismount.
www.smoothfitness.com
7
SUPPLIED COMPONENTS / SUPPLIED HARDWARE
This list identifies the major components you will use to assemble this product.
No. Description Qty.
A1
Treadmill Base
1
A2 Console Assembly 1
565-302 Left Upright 1
565-301 Right Upright 1
565-306 Left Protective Cover 1
565-307 Right Protective Cover 1
Hardware Kit
565-303 M8x15mm Bolt 12
565-305 M8 Washer 6
565-304 M8 Curve Washer 6
565-308 M4x15mm Bolt 2
565-309 M4x12mm Bolt 2
A 5mm Allen Key 1
B 6mm Allen Key 1
565-209 Safety Key 1
C Silicone Lubricant 1
565-204 Bottle Holder 1
565-205 M5x15mm Bolt 2
Millimeters
A
1 302 301
A
2
306 307
305
308304 303
B
229
A
309
C
204
205
8 5.65S TREADMILL
COMPLETE PARTS LIST
Part No. Description Qty.
5.65S-1
565S-101
Running Deck Frame 1
565S-102
Front Roller 1
565S-103
Rubber Cushion 6
565S-104
Running Deck 1
565S-105
Running Delt 1
565S-106
Rear Roller 1
565S-107
Motor Control Board 1
565S-108
Upper Motor Cover 1
565S-109
Inductance
1
565S-110
Wave
Filter 1
565S-111
Front Mobile Wheel 2
565S-112
Brass
Pillar 4
565S-113
Base Frame 1
565S-114
Speed Sensor 1
565S-115
On-off Switch 1
565S-116
M8*30mm Bolt 2
565S-117
Power Breaker 1
565S-118
End
Cap-2 2
565S-119
Running Deck Frame End Cap 2
565S-120
M8 Spring Washer 2
565S-121
Drive Belt 1
565S-122
Left Roller Cover 1
565S-123
Right Roller Cover 1
565S-124
Side Rein 2
565S-125
Stud-1 2
565S-126
Washer, Stud 2
565S-127
M8*15mm Bolt 2
565S-128
M3*6mm
Bolt 4
565S-129
Lower Locking Tube 1
565S-130
Upper Locking Tube 1
565S-131
Lower Motor Cover 1
565S-132
Rear Wheel 2
565S-133
M4*6mm
Bolt 2
565S-134
Incline Motor 1
565S-135
DC Motor 1
565S-136
Lift Arm 1
565S-137
Adjustment Pad 2
565S-138
M8*15mm Bolt 4
565S-139
M3*6mm Bolt 2
565S-140
M8*40mm Bolt 2
www.smoothfitness.com
9
COMPLETE PARTS LIST
Part No. Description Qty.
565S-141
M8*40mm 3
565S-142
M8 Nut 2
565S-143
M10*45mm Bolt 1
565S-144
M10 Nut 1
565S-145
M8 Spring Washer 5
565S-146
M8*15mm Bolt 2
565S-147
Ring
Core 2
565S-148
M8*140mm Bolt 1
565S-149
M8 Nut 2
565S-150
5/16"*135mm Bolt 1
565S-151
Lower Console Wire 1
565S-152
M8 Spring washer 1
565S-153
M4*10mm
-1 Bolt 8
565S-154
M4*10mm-2 Bolt 4
565S-155
Power Cord 1
565S-156
Washer, Stud 2
565S-157
M8*30mm Bolt 1
565S-58
M8*70mm Bolt 3
565S-159
M6*15mm Washer 8
565S-160
Bolt M8*25mm
8
565S-161
Wire Clip 4
565S-162
M5*12mm Bolt 4
565S-163
Air Shock 1
565S-164
M8*15mm Bolt 2
565S-165
M8*55mm Bolt 1
565S-166
M8*60mm Bolt 1
565S-167
M4*15mm Bolt 2
565S-168
Fixing Bracket, Motor 1
565S-169
Electric
Wire Cover 1
565S-170
Stud-2 2
565S-171
Horizontal Adjustment 2
565S-172
Spacer 2
565S-173
Bushing 4
565S-174
M4*10mm Bolt 7
565S-175
Rubber Cushion -2 2
565S-176
Rubber Cushion -3 2
10 5.65S TREADMILL
COMPLETE PARTS LIST
Part No. Description Qty.
565S-2
565S-201 Console Frame 1
565S-202 Console Housing 1
565S-203 M4x12mm Bolt 14
565S-204 Bottle Holder 1
565S-205 M5x15mm Bolt 2
565S-206 M4x15mm Bolt 5
565S-207 Handle Pulse Sensor 2
565S-208 M4x25mm Bolt 2
565S-209 Stud 2
565S-210 Ring Core 1
565S-211 Console Insert 1
565S-212 Fixing Bracket, left speaker 1
565S-213 Fixing Bracket, right speaker 1
565S-214 Panel, console 1
565S-215 M3x6mm Bolt 5
565S-216 Hand Pulse PCB 1
565S-217 Sensor 1
565S-218 Fan 1
565S-219 Speaker 2
565S-220 M3x30mm Bolt 4
565S-221 Handle Grip Foam 2
565S-222 Receiver 1
565S-223 Handle Button 2
565S-224 M4x12mm Bolt 4
565S-225 Handle Button Sticker 2
565S-226 Net of speaker (left) 2
565S-227 Net of speaker (right) 1
565S-228 Soft Touch Keypad 1
565S-229 Safety Key 1
565S-230 Console Wire 1
565S-231 Handle Button Wire 2
565S-232 Receiver Wire 1
565S-233 Hand Pulse Wire 2
565S-234 Data Updated Wire 1
565S-235 Audio Jack 1
www.smoothfitness.com
11
COMPLETE PARTS LIST
Part No. Description Qty.
565S-3
565S-301 Right Upright 1
565S-302 Left Upright 1
565S-303 M8x15mm Bolt 12
565S-304 M8 Curve Washer 6
565S-305 M8 Washer 6
565S-306 Left Protective Cover 1
565S-307 Right Protective Cover 1
565S-308 M4x15mm Bolt 2
565S-309 M4x12mm Bolt 2
12 5.65S TREADMILL
PARTS DIAGRAM
MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED
www.smoothfitness.com
13
PARTS DIAGRAM
MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.
14 5.65S TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
www.smoothfitness.com
15
ASSEMBLY
PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
STEP1: Assemble Console Mast to Base Frame.
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or
pinch. DO NOT tighten any bolts until STEP2.
When attaching the Right
upright (310) first attach the Lower Console Wire to the
fish wire in the upright. This will allow you to pull the data cable up through the
upright during installation
1). Attach Left and Right Uprights into base frame, and secure using the 6 x
M8x15mm Bolt (303) with 4 x M8 Curve Washer (304), 2 x M8 Washer (305).
303 X6
305 X2
304 X4
Bolts should be hand tight only
Green plastic wrap
Clear plastic wrap
303
305
303
304
151
Caution Wire
Pinch Point
16 5.65S TREADMILL
ASSEMBLY
STEP2: Attach Console to Left and Right Uprights
1). Connect the Upper Console Wire (230) from the console set to Lower Console
Wire (151) in the right upright, Then place the excess wire and the connectors
into right upright.
2). Place the entire console set onto the uprights, and secure the left side using 3
x M8x15mm Bolt (303) with 2 x M8 Washer (305) and 1 x M8 Curve Washer
(304).
3). Repeat the above process for the Right side
4). Fully tighten all bolts from step 1 and step 2
303 X6
305 X4
304 X2
Caution Pinch point! Do not pinch wires between frame.
Tighten all bolts and fasteners now
303
305
303
304
230
151
www.smoothfitness.com
17
ASSEMBLY
STEP3: Fasten protective cover on the upright
1). Attach the Left Protective Cover (306) onto the Left upright and secure using
1 x M4x15mm Bolt (308) and 1 x M4x12mm Bolt (309).
2). Repeat the above process for the Right side.
308 X2
309 X2
306
308
307
309
18 5.65S TREADMILL
ASSEMBLY
STEP4: Assembly the console to the bottle holder
Attach the Bottle holder to the console set, and secure using M5x15mm Bolt (205).
205 X2
204 X1
Tighten all bolts and fasteners now
205
204
www.smoothfitness.com
19
ASSEMBLY
STEP 5:
Insert the Safety Key (229) into Bottom Center of Console prior to operation.
Your treadmill will not Function with out the safety key.
229 X1
20 5.65S TREADMILL
ASSEMBLY
How to fold and unfold the treadmill:
Your treadmill can be folded up and unfold for space saving storage. To do this follow the instructions here:
Fold Up
1. To fold the deck you first need to bring the treadmill
to the lowest incline level and then remove the
power cord
2. Lift the deck up from the rear of the treadmill and
fold up until it locks in place. TO PREVENT INJURY
BE SURE YOU HAVE A FIRM HOLD WHEN
RAISING THE DECK.
3. You will hear a “click” sound as the lock engages.
Unfold
To unfold the treadmill from the upright position:
1. Begin by standing behind the unit and support the
deck with your hands. Next release the lock with
your foot by pressing the release lever with your
foot. TO PREVENT INJURY BE SURE YOU HAVE
A FIRM HOLD ON THE DECK BEFORE
RELEASING THE LOCK.
2. Slowly lower the deck until the deck start to lower by
itself. The deck will lower slowly until it rests firmly
on the ground. PLEASE DO NOT STAND BEHIND
THE TREADMILL AND BE CERTAIN THE AREA
BEHIND IS CLEAR WHEN THE DECK IS
LOWERING
Horizontal Adjustment
An uneven floor or improper stabilizer level can cause
the treadmill to wobble during use as well as the incline
adjustment to function incorrectly. Please follow the
procedure described below to make sure the treadmill
stabilizer is adjusted correctly prior to use. You may
need the assistance of another person to perform this
adjustment.
First locate the two adjustable stabilizers under the
base frame. Then simply rotate them in or out to
adjust the level of the treadmill. When properly
adjusted the treadmill should sit firmly on both
stabilizers and all cushions.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

Smooth Fitness 5.65S Manuel utilisateur

Catégorie
Fitness, gymnastique
Taper
Manuel utilisateur

dans d''autres langues