Ryobi RY40860 Manuel utilisateur

Marque: Ryobi

Modèle: RY40860

Catégorie: Taille-haies sans fil

Taper: Manuel utilisateur

Ce manuel convient également à

Su accesorio para podar setos ha sido diseñada y fabricada de

conformidad con las estrictas normas para brindar fiabilidad,

facilidad de uso y seguridad para el operador. Con el debido cuidado,

le brindará muchos años de sólido y eficiente funcionamiento.

ADVERTENCIA: Para reducir el riesgo de lesiones,

el usuario debe leer y comprender el manual del operador antes

de usar este producto.

Le agradecemos su compra.

BATTERIES AND CHARGERS SOLD SEPARATELY

PILES ET CHARGEUR VENDUS SÉPARÉMENT

LAS BATERÍAS Y EL CARGADOR SE VENDEN POR SEPARADO

OPERATOR’S MANUAL

MANUEL D’UTILISATION/MANUAL DEL OPERADOR

RY40060

HEDGE TRIMMER ATTACHMENT

FOR USE WITH RY24001 24 V

OR RY40001B 40 V POWER HEAD

ACCESSOIRE DE TAILLE-HAIES RY40060

A UTILISER AVEC LE BLOC-MOTEUR RY24001 DE 24 V OU RY40001B DE 40 V

ACCESORIO PARA PODAR SETOS RY40060

PARA USAR CON LA CABEZAL MOTOR RY24001 24 V O RY40001B 40 V

ALL VERSIONS

TOUTES LES VERSIONS/TODAS LAS VERSIONES

Votre accessoire de taille-haies a été conçue et fabriquée

conformément à nos strictes normes de fiabilité, simplicité d’emploi

et sécurité d’utilisation. Correctement entretenue, elle vous donnera

des années de fonctionnement robuste et sans problème.

AVERTISSEMENT : Pour réduire les risques de

blessures, l’utilisateur doit lire et veiller à bien comprendre le

manuel d’utilisation avant d’employer ce produit.

Merci de votre achat.

CONSERVER CE MANUEL POUR

FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL PARA

FUTURAS CONSULTAS

SAVE THIS MANUAL FOR FUTURE REFERENCE

Your hedge trimmer attachment has been engineered and manufactured to our high standard for dependability, ease of

operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using

this product.

Thank you for your purchase.

See this fold-out section for all the figures

referenced in the operator’s manual.

Voir que cette section d’encart pour toutes les

figures a adressé dans le manuel d’utilisation.

Vea esta sección de la página

desplegable para todas las figuras mencionó

en el manual del operador.

iii

HEDGE TRIMMER ATTACHMENT WITH 24 V POWER HEAD

ACCESSOIRE DE TAILLE-HAIES AVEC LE BLOC-MOTEUR DE 24 V

ACCESORIO PARA PODAR SETOS CON CABEZAL MOTOR DE 24 V

Fig. 1

A - Blade cover (fourreau de lame, cubierta de la

hoja)

B - Guard (garde, protección)

C - Hedge trimmer attachment shaft (arbre de

l’accessoire de taille-haies, eje del accesorio

para podar setos)

D - Coupler (coupleur, acoplador)

E - Intermediate shaft (arbre intermédiaire, eje

intermedia)

F - Front handle (poignée avant, mango

delantero)

G - Lock-out (verrouillage, seguro)

H - Rear handle (poignée arrière, mango

trasero)

I - 24 V battery pack (bloc-piles de 24V,

paquete de baterías de 24V)

J - 40 V battery pack (bloc-piles de 40V, paquete

de baterías de 40V)

K - Switch trigger (gâchette, gatillo del

interruptor)

L - Three-position pivoting head (tête pivotante

à trois positions, cabezal pivotante de tres

posiciones)

M- Blades (lames, cuchilla)

HEDGE TRIMMER ATTACHMENT WITH 40 V POWER HEAD

ACCESSOIRE DE TAILLE-HAIES AVEC LE BLOC-MOTEUR DE 40 V

ACCESORIO PARA PODAR SETOS CON CABEZAL MOTOR DE 40 V

A - 24 V power head (24 V battery, 24 V battery)

B - 40 V power head (40 V battery, 40 V battery)

C - Lock-out (verrouillage, seguro)

D - Switch trigger (gâchette, gatillo del

interruptor)

Fig. 6

Fig. 2

Fig. 3

A - Coupler (coupleur, acoplador)

B - Base (base, base)

C - Arrow (flèche, flecha)

A - 24 V power head (arbre moteur de 24V, cabezal motor eje de 24V)

B - 24 V battery pack (bloc-piles de 24V, paquete de baterías de 24V)

C - Latch(es) [loquet(s), pestillo(s)]

D - 40 V power head (arbre moteur de 40V, cabezal motor eje de 40V)

E - 40 V battery pack (bloc-piles de 40V, paquete de baterías de 40V)

A - Knob (bouton, perilla)

Fig. 4

Fig. 5

A - Pivot button (bouton de pivot, botón

del pivote)

B - Notches (enchoches, muescas)

Fig. 7

Fig. 9

NORMAL EXTENDED REACH OPERATING POSITION

PORTÉE PROLONGÉE NORMALE FONCTIONNANT LA POSITION

ALCANCE EXTENDIDO NORMAL QUE OPERA POSICIÓN

Fig. 10

Fig. 11

A - Cutting teeth (dents de coupe, dientes de

corte)

B - Guard teeth (dents de coupe, dientes de

proteción)

Fig. 12

A - Blade cover (fourreau de lame, cubierta de la

hoja)

Fig. 8

2 — English

 Introduction ......................................................................................................................................................................2

Introduction / Introducción

 General Power Tool Safety Warnings ............................................................................................................................3-4

Instructions de sécurité générales pour outils électriques / Advertencias de seguridad para herramientas eléctricas

 Specific Safety Rules ........................................................................................................................................................ 4

Règles de sécurité particulières / Reglas de seguridad específicas

Symbols ............................................................................................................................................................................ 5

Symboles / Símbolos

 Features ............................................................................................................................................................................6

Caractéristiques / Características

 Assembly .......................................................................................................................................................................... 7

Assemblage / Armado

 Operation ....................................................................................................................................................................... 8-9

Utilisation / Funcionamiento

 Maintenance ................................................................................................................................................................9-10

Entretien / Mantenimiento

 Troubleshooting .............................................................................................................................................................. 11

Dépannage / Corrección de problemas

 Warranty ......................................................................................................................................................................... 12

Garantie / Garantía

 Parts Ordering and Service ...............................................................................................................................Back Page

Commande de pièces et réparation / Pedidos de piezas y servicio ......................................................... Page arrière / Pág. posterior

TABLE OF CONTENTS

TABLE DES MATIÈRES / ÍNDICE DE CONTENIDO

INTRODUCTION

INTRODUCTION / INTRODUCCIÓN

This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability

have been given top priority in the design of this product making it easy to maintain and operate.

* * *

Ce produit offre de nombreuses fonctions destinées à rendre son utilisation plus plaisante et satisfaisante. Lors de la

conception de ce produit, l’accent a été mis sur la sécurité, les performances et la fiabilité, afin d’en faire un outil facile à

utiliser et à entretenir.

* * *

Este producto ofrece numerosas características para hacer más agradable y placentero su uso. En el diseño de este producto

se ha conferido prioridad a la seguridad, el desempeño y la fiabilidad, por lo cual se facilita su manejo y mantenimiento.

3 — English

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases

or dust. Power tools create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

shock.

Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoid-

able, use a ground fault circuit interrupter (GFCI) pro-

tected supply. Use of a GFCI reduces the risk of electric

shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use

a power tool while you are tired or under the influence

of drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious personal

injury.

Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in

the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or ener-

gising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may affect the power tool’s operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

4 — English

Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk of

injury and fire.

When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws

or other small metal objects, that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a fire.

GENERAL POWER TOOL SAFETY WARNINGS

Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs,

flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

SERVICE

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

HEDGE TRIMMER SAFETY WARNINGS

Keep all parts of the body away from the cutter blade. Do

not remove cut material or hold material to be cut when

blades are moving. Make sure the switch is off when

clearing jammed material. Blades coast after turn off.

A moment of inattention while operating the hedge trimmer

may result in serious personal injury.

Carry the hedge trimmer by the handle with the cutter

blade stopped. Proper handling of the hedge trimmer will

reduce possible personal injury from the cutter blades.

Hold the power tool by insulated gripping surfaces only,

because the cutter blade may contact hidden wiring or its

own cord. Cutter blades contacting a “live” wire may make

exposed metal parts of the power tool “live” and could give

the operator an electric shock.

DANGER — Keep hands away from blade. Contact with

blade will result in serious personal injury.

WARNING — Only use with handle and guard properly

assembled to hedge trimmer. The use of the hedge trimmer

without the proper guard or handle provided may result in

serious personal injury.

ADDITIONAL SAFETY RULES

Do not wear loose clothing or jewelry. Contain long hair.

Loose clothes, jewelry, or long hair can be drawn into air

vents.

Do not use on a ladder, rooftop, or unstable support.

Stable footing on a solid surface enables better control of

the power tool in unexpected situations.

 Wear heavy, long pants, long sleeves, boots, and gloves.

Do not wear loose fitting clothing, short pants, sandals, or

go barefoot. Do not wear jewelry of any kind.

Use both hands when operating the hedge trimmer. Using

one hand could cause loss of control and result in serious

personal injury.

Before starting the hedge trimmer, make sure the blade is

not in contact with any object.

Stop the unit, remove the battery pack, and make sure the

blade has stopped before setting the unit down.

 Never cut any material with a diameter larger than

5/8 in.

Always stop the motor when cutting is delayed or when

walking from one cutting location to another.

Keep unit clean of grass clippings and other materials. They

may become lodged in the cutting blades.

If hedge trimmer is equipped with a debris remover, do not

use the debris remover as a gripping surface.

Store the unit inside in a dry place, either locked up or up

high to prevent unauthorized use or damage. Keep out of

the reach of children or untrained individuals.

Replace blade cover when unit is not in use.

Never douse or squirt the unit with water or any other liquid.

Keep handles dry, clean, and free from debris. Clean after

each use; see storage instructions.

Secure the unit while transporting.

Battery operated units do not have to be plugged into an

electrical outlet; therefore, they are always in operating

condition. Be aware of possible hazards even when unit is

not operating.

Remove the battery pack before making any adjustments,

cleaning, storing, or removing material from the unit, or when

not in use.

When transporting or storing the hedge trimmer always

fit the cutting device cover.

Keep cable away from cutting area. During operation the

cable may be hidden in shrubs and can be accidentally cut

by the blade.

 Wear eye protection with side shields, which is marked to

comply with ANSI Z87.1 when operating this product. Wear

head protection when operating this product above shoulder

level.

 Keep all bystanders, children, and pets at least 50 feet away.

Bystanders should be encouraged to wear eye protection.

 Use only with battery and charger listed.

• When using with 24 V power head, use 24 V lithium-ion

battery packs. See Tool/Appliance/Battery Pack/Charger

Correlation Supplement 988000-446.

• When using with 40 V power head, use 40 V lithium-ion

battery packs. See Tool/Appliance/Battery Pack/Charger

Correlation Supplement 988000-842.

 Save these instructions. Refer to them frequently and use

them to instruct others who may use this tool. If you loan

someone this tool, loan them these instructions also.

5 — English

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in

minor or moderate injury.

NOTICE:

(Without Safety Alert Symbol) Indicates important information not related to an

injury hazard, such as a situation that may result in property damage.

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL NAME EXPLANATION

Safety Alert Symbol Indicates a potential personal injury hazard.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand

operator’s manual before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply

with ANSI Z87.1. Wear head protection when operating this

product above shoulder level.

Wet Conditions Alert Do not use in wet or damp locations.

Rain Symbol Do not expose to rain.

No Hands Symbol

Failure to keep your hands away from the blade will result

in serious personal injury.

Keep Tool Away from Electrical

Lines/Keep Bystanders Away

DANGER! Risk of electrocution! Keep tool 50 feet away from

electrical lines. Keep all bystanders at least 50 ft. away.

Gloves

Wear non-slip, heavy-duty protective gloves when handling

the blades.

Operate With Two Hands Hold and operate the hedge trimmer properly with both hands.

Moving Parts Keep hands away from moving parts.

Electric Shock

Failure to use in dry conditions and to observe safe practices

can result in electric shock.

6 — English

FEATURES

KNOW YOUR PRODUCT

See Figure 1.

The safe use of this product requires an understanding of

the information on the tool and in this operator’s manual as

well as a knowledge of the project you are attempting. Before

use of this product, familiarize yourself with all operating

features and safety rules.

BLADE COVER

The blade cover keeps the operator from coming in contact

with the sharp blades when the tool is not in use. It also helps

keep the blades from being nicked or damaged when the

tool is in storage.

THREE-POSITION PIVOTING HEAD

The hedge trimmer head can be adjusted with the pivot

button.

IF PURCHASED WITH A RYOBI 24 V OR 40 V POWER

HEAD, YOUR UNIT ALSO FEATURES:

ADJUSTABLE FRONT HANDLE

The front handle assembly can be adjusted for ease of

operation and to help prevent loss of control, and can be

positioned above or below the coupler.

HANDLE OVERMOLD

Handle overmold provides added user comfort.

LOCK-OUT

The lock-out prevents accidental starting.

VARIABLE SPEED SWITCH TRIGGER

This tool has a variable speed switch that delivers higher

speed with increased trigger pressure. Speed is controlled

by the amount of switch trigger depression.

PRODUCT SPECIFICATIONS

Blade Length .............................................................. 18 in.

Cutting Capacity...............................................up to 5/8 in.

Cutting Speed ............................................ 3,000 cuts/min.

Weight ................................................................... 6.26 lbs.

Compatible With .............Ryobi 24 V and 40 V Power Head

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL NAME EXPLANATION

Recycle Symbol

This product uses lithium-ion (Li-ion) batteries. Local, state, or

federal laws may prohibit disposal of batteries in ordinary trash.

Consult your local waste authority for information regarding

available recycling and/or disposal options.

V Volts Voltage

hrs Hours Time

Direct Current Type or a characteristic of current

No Load Speed Rotational speed, at no load

.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute

If purchased with 24 V power head:

Motor ............................................................ 24 Volts DC

If purchased with 40 V power head:

Motor ............................................................ 40 Volts DC

7 — English

WARNING:

Hedge trimmer blades are extremely sharp. Do not

remove the blade cover until the hedge trimmer is fully

assembled and ready to use. Always use caution when

removing the blade cover. Failure to comply could result

in possible serious personal injury.

CONNECTING THE HEDGE TRIMMER

ATTACHMENT TO THE POWER HEAD

See Figure 2.

WARNING:

Never install, remove, or adjust any attachment while

power head is running or with the battery pack installed.

Failure to stop the motor or remove the battery pack can

result in serious personal injury.

The attachment connects to the power head by means of

a coupler device.

 Remove the battery pack if installed.

 Align the arrows on the attachment shaft and the

intermediate shaft and insert the plug on the attachment

into the opening on the coupler. Make sure the plug is

fully seated.

 Slide the threaded coupler on the intermediate shaft onto

the threaded base on the attachment and turn the coupler

clockwise. Tighten securely.

 Align the arrows on the intermediate shaft and the power

head and insert the plug on the intermediate shaft into

the opening on the coupler. Make sure the plug is fully

seated.

 Slide the threaded coupler on the power head onto the

threaded base on the intermediate shaft and turn the

coupler clockwise. Tighten securely.

NOTE: Once assembled correctly, the hedge trimmer

attachment and power head should not separate when pulled.

Repeat above steps if pieces can be separated.

If extended reach application is not desired, it is not

necessary to install the intermediate shaft. The hedge trimmer

attachment can be connected directly to the power head.

WARNING:

Failure to secure the attachment and power head as

instructed above could result in serious personal injury.

REMOVING THE ATTACHMENT FROM THE

POWER HEAD

 Remove the battery pack.

 Turn the couplers counterclockwise to unlock, then

remove the attachment shaft and the intermediate shaft

from the power head.

ASSEMBLY

UNPACKING

This product requires assembly.

 Carefully remove the product and any accessories from

the box. Make sure that all items listed in the packing list

are included.

WARNING:

Do not use this product if any parts on the Packing List

are already assembled to your product when you unpack

it. Parts on this list are not assembled to the product by

the manufacturer and require customer installation. Use

of a product that may have been improperly assembled

could result in serious personal injury.

 Inspect the product carefully to make sure no breakage

or damage occurred during shipping.

 Do not discard the packing material until you have carefully

inspected and satisfactorily operated the product.

 If any parts are damaged or missing, please call

1-800-860-4050 for assistance.

PACKING LIST

Hedge Trimmer Attachment

Intermediate Shaft

Blade Cover

Operator’s Manual

Some models may also include Ryobi 24 V or 40 V Power

Head.

WARNING:

If any parts are damaged or missing do not operate this

product until the parts are replaced. Use of this product

with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create

accessories not recommended for use with this product.

Any such alteration or modification is misuse and could

result in a hazardous condition leading to possible serious

personal injury.

WARNING:

To prevent accidental starting that could cause serious

personal injury, always remove the battery pack from the

product when assembling parts.

8 — English

OPERATION

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

APPLICATIONS

You may use this product for the purpose listed below:

 Trimming and shaping hedges and shrubbery

Depending on the power head your are using, this product

will accept either Ryobi 24 V or Ryobi 40 V battery packs.

For complete charging instructions, refer to the Operator’s

Manuals for your Ryobi battery pack and charger models.

TO INSTALL BATTERY PACK

See Figure 3.

WARNING:

Always remove battery pack from your tool when you are

assembling parts, making adjustments, cleaning, or when

not in use. Removing battery pack will prevent accidental

starting that could cause serious personal injury.

 Insert the battery pack into the product as shown.

WARNING:

Make sure the latch (or latches) on the battery pack snap

in place and the battery pack is fully seated and secure in

the power head battery port before beginning operation.

Failure to securely seat the battery pack could cause the

battery pack to fall out, resulting in serious personal injury.

TO REMOVE BATTERY PACK

See Figure 3.

 Depress the latch (or latches) on the battery pack.

 Remove the battery pack.

WARNING:

To avoid serious personal injury, always remove the bat-

tery pack and keep hands clear of the lock-out when

carrying or transporting the tool.

ADJUSTABLE FRONT HANDLE

See Figure 4.

The angle of the front handle can be adjusted 180°.

 Remove the battery pack.

 Set the hedge trimmer on a flat surface and turn the knob

counterclockwise to loosen the handle.

 Adjust the handle as desired.

 Turn the knob clockwise until the handle is securely

tightened before reinstalling the battery pack.

ADJUSTING PIVOTING HEAD

See Figure 5.

 Remove the battery pack.

 Place the hedge trimmer on a sturdy flat surface.

 Push pivot button and adjust trimmer head until it snaps

securely into place at one of the three positions indicated

by the notches.

WARNING:

Do not place hand between pivoting head and threaded

base. Placement of your hand or fingers in this area could

result in a pinch point injury.

STARTING/STOPPING THE HEDGE TRIMMER

See Figure 6.

To start:

 Press and hold the lock-out.

 Depress the switch trigger.

To stop:

 Release the switch trigger to stop the hedge trimmer.

 Upon release of the switch trigger, the lock-out will

automatically reset to the locked position.

CUTTING TIPS

See Figure 7 - 9.

DANGER:

Never cut near power lines, electric cords, or other elec-

tric sources. If blade jams on any electrical cord or line,

DO NOT TOUCH THE BLADE! IT CAN BECOME ELEC-

TRICALLY LIVE AND VERY DANGEROUS. Continue to

hold the hedge trimmer by the insulated rear handle or lay

it down and away from you in a safe manner. Disconnect

the electrical service to the damaged line or cord before

attempting to free the blade from the line or cord. Con-

tact with the blade, other conductive parts of the hedge

trimmer, or live electric cords or lines will result in death

by electrocution or serious injury.

9 — English

OPERATION

WARNING:

Clear the area to be cut before each use. Remove all

objects such as cords, lights, wire, or loose string which

can become entangled in the cutting blade and create a

risk of serious personal injury.



Before starting the hedge trimmer, hold the unit with both

hands with the cutting blades directed away from you.

Always use the hedge trimmer properly.



Do not force the hedge trimmer through heavy shrubbery.

This can cause the blades to bind and slow down. If the

blades slow down, reduce the pace.



Do not try to cut stems or twigs that are larger than

5/8 in. thick, or those obviously too large to feed into the

cutting blade. Use a non-powered hand saw or pruning

saw to trim large stems.



If blades do become jammed, stop the motor, allow

the blades to stop and remove the battery pack before

attempting to remove the obstruction.



If desired, you can use a string to help cut your hedge

level. Decide how high you want the hedge. Then, stretch

a piece of string along the hedge at this height. Trim the

hedge just above this guide line of string. Trim the side

of a hedge so that it will be slightly narrower at the top.

More of the hedge will be exposed when shaped this way,

and it will be more uniform.



Always hold hedge trimmer with both hands when

operating. Use a firm grip on the handles. The unit is used

for cutting in either direction in a slow, sweeping action

from side to side.



Wear gloves when trimming thorny or prickly growth.



When trimming new growth, use a wide sweeping action,

so that the stems are fed directly into the cutting blade.

Older growth will have thicker stems and will be trimmed

easiest by using a sawing movement.

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts could create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

To avoid serious personal injury, always remove the

battery pack from the tool when cleaning or performing

any maintenance.

GENERAL MAINTENANCE

Before each use, inspect the entire product for damaged,

missing, or loose parts such as screws, nuts, bolts, caps, etc.

Tighten securely all fasteners and caps and do not operate

this product until all missing or damaged parts are replaced.

Please call 1-800-860-4050 or contact an authorized service

center for assistance.

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which could result in serious personal injury.

Only the parts shown on the parts list are intended to be

repaired or replaced by the customer. All other parts should

be replaced at an Authorized Service Center.

TRANSPORTING AND STORING

 Remove the battery pack.

 Always place the blade cover on the blade before storing

or transporting the hedge trimmer. Use caution to avoid

the sharp teeth of the blade.

 Clean the hedge trimmer thoroughly before storing.

Store the hedge trimmer indoors, in a dry place that is

inaccessible to children. Keep away from corrosive agents

such as garden chemicals and de-icing salts.

10 — English

MAINTENANCE

WARNING:

Always allow the blades of the hedge trimmer to come to

a stop and remove the battery pack before lubricating or

sharpening the blade. Failure to do so could result in ac-

cidental starting causing possible serious personal injury.

LUBRICATING THE BLADE

See Figure 10.

For easier operation and longer blade life, lubricate the hedge

trimmer blade before and after each use.

Remove the battery pack from the hedge trimmer.

 Lay the hedge trimmer on a flat surface. Apply light weight

machine oil along the edge of the top blade.

NOTE: If you will be using the hedge trimmer for an extended

time, it is advisable to oil the blade periodically.

 Stop the hedge trimmer.

 Remove the battery pack.

 Lubricate the hedge trimmer as described above.

 Reinstall the battery pack and resume use.

SHARPENING THE BLADE

See Figure 11.

 Allow the blades of the hedge trimmer to come to a stop

in the position shown. This will allow clearance for the

file between the cutting teeth and the guard teeth.

 Remove the battery pack from the hedge trimmer.

 Clamp the blade assembly in a vise and file the exposed

cutting surface of each blade tooth with an 8 in. smooth

round file, 1/4 in. or 7/32 in. in diameter. Be sure to retain

the original angle of the tooth when filing.

 Remove the hedge trimmer from the vise, replace the

battery pack, and restart the hedge trimmer. Allow the

blades of the hedge trimmer to come to a stop so that

the unsharpened edges on the other side of the cutter

blade teeth are exposed.

 Remove battery pack from hedge trimmer and repeat the

sharpening procedure as described above.

CLEANING THE HEDGE TRIMMER

 Remove the battery pack.

 Slide the blade cover over the blade.

 Clean dirt and debris from the body of the hedge trimmer,

using a damp cloth with a mild detergent.

NOTE: Do not use any strong detergents on the plastic

housing or the handle. They can be damaged by certain

aromatic oils such as pine and lemon, and by solvents

such as kerosene.

 Moisture can cause a shock hazard. Wipe off any moisture

with a soft dry cloth.

 Use a small brush or the air discharge of a small vacuum

cleaner brush to clear dust or debris from the air vents

on the motor housing.

STORING THE HEDGE TRIMMER

See Figure 12.

 Remove the battery pack and store it out of the reach of

children when storing the hedge trimmer.

 Clean the hedge trimmer thoroughly before storing. Store

the hedge trimmer in a dry, well-ventilated place that is

inaccessible to children. Keep away from corrosive agents

such as garden chemicals and de-icing salts.

 Always place the blade cover on the cutting blades before

storing.

BATTERY PACK REMOVAL AND PREPARATION

FOR RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with

heavy-duty adhesive tape. Do not attempt to destroy or

disassemble battery pack or remove any of its compo-

nents. Batteries must be recycled or disposed of properly.

Also, never touch both terminals with metal objects and/

or body parts as short circuit may result. Keep away from

children. Failure to comply with these warnings could

result in fire and/or serious injury.

11 — English

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE

SOLUTION

Motor fails to start when switch

trigger is depressed.

Battery is not secure.

Battery is not charged.

To secure the battery pack, make sure the latch

(or latches) snap into place.

Charge the battery pack according to the

instructions included with your model.

CALL US FIRST

For any questions about operating or maintaining your product,

call the Ryobi® Help Line!

Your product has been fully tested prior to shipment to ensure

your complete satisfaction.

12 — English

LIMITED WARRANTY STATEMENT

Techtronic Industries North America, Inc., warrants to the

original retail purchaser that this RYOBI® brand outdoor

product is free from defect in material and workmanship

and agrees to repair or replace, at Techtronic Industries

North America, Inc.’s, discretion, any defective product

free of charge within these time periods from the date of

purchase.

 Three years if the product is used for personal, family

or household use;

 90 days, if used for any other purpose, such as

commercial or rental.

This warranty extends to the original retail purchaser

only and commences on the date of the original retail

purchase.

Any part of this product found in the reasonable judgment

of Techtronic Industries North America, Inc. to be defective

in material or workmanship will be repaired or replaced

without charge for parts and labor by an authorized service

center for RYOBI® brand outdoor products (Authorized

Ryobi Service Center).

The product, including any defective part, must be returned

to an authorized Ryobi service center within the warranty

period. The expense of delivering the product to the service

center for warranty work and the expense of returning it

back to the owner after repair or replacement will be paid

by the owner. Techtronic Industries North America, Inc.’s,

responsibility in respect to claims is limited to making the

required repairs or replacements and no claim of breach of

warranty shall be cause for cancellation or rescission of the

contract of sale of any RYOBI® brand outdoor product. Proof

of purchase will be required by the dealer to substantiate

any warranty claim. All warranty work must be performed

by an authorized service dealer.

This warranty is limited to ninety (90) days from the date

of original retail purchase for any RYOBI® brand outdoor

product that is used for rental or commercial purposes, or

any other income-producing purpose.

This warranty does not cover any product that has been

subject to misuse, neglect, negligence, or accident, or that

has been operated in any way contrary to the operating

instructions as specified in this operator’s manual. This

warranty does not apply to any damage to the product that

is the result of improper maintenance or to any product

that has been altered or modified. The warranty does not

extend to repairs made necessary by normal wear or by the

use of parts or accessories which are either incompatible

with the RYOBI® brand outdoor product or adversely affect

its operation, performance, or durability. In addition, this

warranty does not cover:

A. Tune-ups – Spark Plugs, Carburetor, Carburetor

Adjustments, Ignition, Filters

B. Wear items – Bump Knobs, Outer Spools, Cutting

Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive

Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades,

Blower Fans, Blower and Vacuum Tubes, Vacuum Bag

and Straps, Guide Bars, Saw Chains

Techtronic Industries North America, Inc., reserves the

right to change or improve the design of any RYOBI® brand

outdoor product without assuming any obligation to modify

any product previously manufactured.

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION

TO THE STATED WARRANTY PERIOD. ACCORDINGLY,

ANY SUCH IMPLIED WARRANTIES INCLUDING

MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR OTHERWISE, ARE DISCLAIMED

IN THEIR ENTIRETY AFTER THE EXPIRATION OF

THE APPROPRIATE THREE-YEAR OR NINETY-DAY

WARRANTY PERIOD. TECHTRONIC INDUSTRIES

NORTH AMERICA, INC.’S, OBLIGATION UNDER THIS

WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO

THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS

AND TECHTRONIC INDUSTRIES NORTH AMERICA,

INC., DOES NOT ASSUME OR AUTHORIZE ANYONE

TO ASSUME FOR THEM ANY OTHER OBLIGATION.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE

LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC

INDUSTRIES NORTH AMERICA, INC., ASSUMES NO

RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL,

OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED

TO, EXPENSE OF RETURNING THE PRODUCT TO AN

AUTHORIZED RYOBI SERVICE CENTER AND EXPENSE

OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S

TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,

RENTAL OF A LIKE PRODUCT DURING THE TIME

WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,

LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS

OF REVENUE, LOSS OF USE OF THE PRODUCT, LOSS

OF TIME, OR INCONVENIENCE. SOME STATES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

This warranty applies to all RYOBI® brand outdoor products

manufactured by or for Techtronic Industries North America,

Inc., and sold in the United States and Canada.

To locate your nearest Authorized Ryobi Service Center,

dial 1-800-860-4050.

WARRANTY

13 — English

NOTES

3 — Français

AVERTISSEMENT

Lire tous les avertissements et toutes les instructions.

Ne pas suivre l’ensemble des avertissements et des instruc-

tions peut entraîner une électrocution, un incendie ou des

blessures graves.

Conserver les avertissements et les instructions à des fins

de référence ultérieure.

Le terme « outil motorisé », utilisé dans

tous les avertissements ci-dessous désigne tout outil fonctionnant

sur secteur (câblé) ou sur piles (sans fil).

SÉCURITÉ DU LIEU DE TRAVAIL

Garder le lieu de travail propre et bien éclairé. Les endroits

encombrés ou sombre s sont propices aux accidents.

Ne pas utiliser d’outils électriques dans des atmosphères

explosives, par exemple en présence de liquides, gaz ou

poussières inflammables. Les outils électriques produisent

des étincelles risquant d’enflammer les poussières ou vapeurs.

Garder les enfants et badauds à l’écart pendant l’utilisation

d’un outil électrique. Les distractions peuvent causer une

perte de contrôle.

SÉCURITÉ ÉLECTRIQUE

Les fiches des outils électriques doivent correspondre à

la prise secteur utilisée. Ne jamais modifier la fiche, de

quelque façon que ce soit. Ne jamais utiliser d’adaptateurs

de fiche avec des outils mis à la terre. Les fiches et prises

non modifiées réduisent le risque de choc électrique.

Éviter tout contact du corps avec des surfaces mises

à la terre, telles que tuyaux, radiateurs, cuisinières et

réfrigérateurs. Le risque de choc électrique est accru lorsque

le corps est mis à la terre.

Ne pas exposer les outils électriques à l’eau ou l’humidité.

La pénétration d’eau dans ces outils accroît le risque de choc

électrique.

Ne pas maltraiter le cordon d’alimentation. Ne jamais

utiliser le cordon d’alimentation pour transporter l’outil et

ne jamais débrancher ce dernier en tirant sur le cordon.

Garder le cordon à l’écart de la chaleur, de l’huile, des

objets tranchants et des pièces en mouvement. Un cordon

endommagé ou emmêlé accroît le risque de choc électrique.

Pour les travaux à l’extérieur, utiliser un cordon

spécialement conçu à cet effet. Utiliser un cordon conçu

pour l’usage extrérieur pour réduire les risques de choc

électrique.

S’il est nécessaire d’utiliser l’outil électrique dans un

endroit humide, employer un dispositif interrupteur de

défaut à la terre (GFCI). L’utilisation d’un GFCI réduit le risque

de décharge électrique.

SÉCURITÉ PERSONNELLE

Rester attentif, prêter attention au travail et faire preuve

de bon sens lors de l’utilisation de tout outil électrique. Ne

pas utiliser cet outil en état de fatigue ou sous l’influence

de l’alcool, de drogues ou de médicaments. Un moment

d’inattention pendant l’utilisation d’un outil électrique peut

entraîner des blessures graves.

Utiliser l’équipement de sécurité. Toujours porter une

protection oculaire. L’équipement de sécurité, tel qu’un

masque filtrant, de chaussures de sécurité, d’un casque

ou d’une protection auditive, utilisé dans des conditions

appropriées réduira le risque de blessures.

Éviter les démarrages accidentels. S’assurer que le

commutateur est en position d’arrêt avant de brancher

l’outil. Porter un outil avec le doigt sur son commutateur ou

brancher un outil dont le commutateur est en position de

marche peut causer un accident.

Retirer les clés de réglage avant de mettre l’outil en

marche. Une clé laissée sur une pièce rotative de l’outil peut

causer des blessures.

Ne pas travailler hors de portée. Toujours se tenir bien

campé et en équilibre. Ceci permettra de mieux contrôler

l’outil en cas de situation imprévue.

Porter une tenue appropriée. Ne porter ni vêtements

amples, ni bijoux. Garder les cheveux, les vêtements et les

gants à l’écart des pièces en mouvement. Les vêtements

amples, bijoux et cheveux longs peuvent se prendre dans les

pièces en mouvement.

Si les outils sont équipés de dispositifs de dépoussiérage,

s’assurer qu’ils sont connectés et correctement utilisés.

L’usage de ces dispositifs de dépoussiérage peut réduire les

dangers présentés par la poussière.

UTILISATION ET ENTRETIEN DES OUTILS

ÉLECTRIQUES

Ne pas forcer l’outil. Utiliser l’outil approprié pour

l’application. Un outil approprié exécutera le travail mieux et de

façon moins dangereuse s’il est utilisé dans les limites prévues.

Ne pas utiliser l’outil si le commutateur ne permet pas de

le mettre en marche ou de l’arrêter. Tout outil qui ne peut

pas être contrôlé par son commutateur est dangereux et doit

être réparé.

Débrancher l’outil et/ou retirer le bloc-piles avant

d’effectuer des réglages, de changer d’accessoire ou de

remiser l’outil. Ces mesures de sécurité préventives réduisent

les risques de démarrage accidentel de l’outil.

Ranger les outils motorisés hors de la portée des enfants

et ne laisser personne n’étant pas familiarisé avec l’outil ou

ces instructions utiliser l’outil. Dans les mains de personnes

n’ayant pas reçu des instructions adéquates, les outils sont

dangereux.

Entretenir les outils motorisés. Vérifier qu’aucune pièce

mobile n’est mal alignée ou bloquée, qu’aucune pièce

n’est brisée et s’assurer qu’aucun autre problème ne

risque d’affecter le bon fonctionnement de l’outil. En cas

de dommages faire réparer l’outil avant de l’utiliser de

nouveau. Beaucoup d’accidents sont causés par des outils

mal entretenus.

Garder les outils bien affûtés et propres. Des outils

correctement entretenus et dont les tranchants sont bien

affûtés risquent moins de se bloquer et sont plus faciles à

contrôler.

Utiliser l’outil, les accessoires et embouts, etc.,

conformément à ces instrutions pour les applications

pour lesquelles ils sont conçus, en tenant compte des

conditions et du type de travail à exécuter. L’usage d’un

outil motorisé pour des applications pour lesquelles il n’est

pas conçu peut être dangereux.

UTILISATION ET ENTRETIEN DE LA PILE

Ne recharger qu’avec l’appareil spécifié par le fabricant. Un

chargeur approprié pour un type de pile peut créer un risque

d’incendie s’il est utilisé avec un autre type de pile.

INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ

INSTRUCTIONS DE SÉCURITÉ GÉNÉRALES

POUR OUTILS ÉLECTRIQUES

4 — Français

INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ

INSTRUCTIONS DE SÉCURITÉ GÉNÉRALES

POUR OUTILS ÉLECTRIQUES

AVERTISSEMENTS DE SÉCURITÉ RELATIFS TAILLE-HAIES

Éloigner toute partie du corps des lames. Ne retirer les

matériaux coincés ou suspendus ou de les tenir lorsque

les lames sont en mouvement. S’assurer que l’interrupteur

est à la position OFF (éteint) lorsque l’on déloge les débris

de matériaux. La lame termine son mouvement une fois

l’outil éteint. Un moment d’inattention pendant l’utilisation du

taille-haie peut occasionner une blessure grave.

Transporter le taille-haie par la poignée et s’assurer que la

lame est immobile. Une manipulation adéquate du taille-haie

réduira les risques de blessures dues aux lames.

Soutenir l’outil électrique par les prises isolées seulement,

car les lames peuvent toucher un fil camouflé ou son propre

cordon d’alimentation. Le contact des lames avec un fil sous

tension « électrifie » les pièces métalliques exposées de l’outil

et peut électrocuter l’utilisateur.

DANGER — Éloigner les mains des lames. Le contact avec

les lames peut provoquer des blessures graves.

AVERTISSEMENT — Seulement l’usage avec la poignée et le

garde est assemblé se couvrir convenablement la taille-haies.

L’usage de la taille-haies sans le garde ou la poignée correct

fournie peut avoir pour résultat sérieuse personnelle la blessure.

RÈGLES DE SÉCURITÉ SUPPLÉMENTAIRES

Ne porter ni vêtements amples, ni bijoux. Attacher ou

couvrir les cheveux longs. Les vêtements amples, bijoux et

cheveux longs peuvent se prendre dans les ouïes d’aération.

Ne pas utiliser l’outil sur une échelle, toits ou un support

instable. Une bonne tenue et un bon équilibre permettent de

mieux contrôler l’outil en cas de situation imprévue.

 Porter des pantalons longs, manches longues, des

chaussures de travail et des gants épais. Ne pas porter de

vêtements amples, bijoux, shorts, sandales et ne pas travailler

pieds nus. Ne porter aucun bijou.

L’utilisation du taille-haie doit se faire avec les deux mains.

Le travail effectué avec une seule main peut provoquer la perte

de contrôle de l’outil et provoquer des blessures graves.

Avant de lancer le moteur, s’assurer que la lame n’est en contact

avec aucun objet.

Arrêter le moteur, retirer le bloc-piles et s’assurer que la lame

est immobilisée avant de poser l’outil.

 Ne jamais couper de tiges de plus de 15,9 mm (5/8 po) de

diamètre.

Arrêter le moteur quand l’outil n’est pas en train de tailler ou

lorsqu’il est transporté d’un endroit à un autre.

Garder l’outil propre. Les débris d’herbe et autres

peuvent se prendre dans les lames.

Si le taille-haies est équipé d’un éjecteur de débris, ne pas se

servir d’éjecteur comme d’une surface de préhension.

Remiser l’outil dans un endroit sec, sous clé ou en hauteur,

pour éviter des dommages ou utilisations non autorisées. Le

garder hors de portée des enfants et des personnes n’étant pas

familières avec son utilisation.

Remettre le fourreau de lame en place lorsque l’outil n’est pas

en usage.

Ne jamais arroser ou asperger l’outil avec de l’eau ou tout autre

liquide. Garder les poignées sèches, propres et exemptes de

débris. Nettoyer après chaque utilisation. Voir les instructions

de remisage.

Arrimer le produit avant de le transporter.

Les outils fonctionnant sur piles n’ayant pas besoin d’être

branchés sur une prise secteur, ils sont toujours en état de

fonctionnement. Rester conscient des dangers lorsque l’outil

n’est pas en usage.

Retirer le bloc-piles avant tout réglage, nettoyage, remisage ou

déblocage et lorsque l’outil n’est pas en usage.

 Toujours installer le dispositif de protection des lames lors

du transport ou du remisage du taille-haie.

 Garder le câble à l’écart des lames. Pendant le fonctionnement

que le câble pourrait être caché dans les arbrisseaux et peut

être coupé accidentel par la lame.

 Toujours porter une protection oculaire avec écrans latéraux

certifiée conforme à la norme ANSI Z87.1 lors de l’utilisation de

produit. Porter la protection de tête en fonctionnant cet produit

au-dessus du niveau d’épaule.

 Garder tous les passants, les enfants, et caresse au moins 50

pieds loin. Les passants devraient être encouragés à porter la

protection oculaire.

 Utiliser seulement la pile et le chargeur indiqués.

• Utiliser les blocs-piles de 24 V au lithium-ion lors de l’utilisation

du bloc-moteur de 24 V. Consulter le supplément de raccorde-

ment pour chargeur/outils/piles/appareil n˚ 988000-446.

• Utiliser les blocs-piles de 40 V au lithium-ion lors de l’utilisation

du bloc-moteur de 40 V. Consulter le supplément de raccorde-

ment pour chargeur/outils/piles/appareil n˚ 988000-842.

Conserver ces instructions. Les consulter fréquemment et les

utiliser pour instruire les autres utilisateurs éventuels. Si cet

produit est prêté, il doit être accompagné de ces instructions.

Utiliser exclusivement le bloc-pile spécifiquement indiqué

pour l’outil. L’usage de tout autre bloc peut créer un risque de

blessures et d’incendie.

Lorsque le bloc-piles n’est pas en usage, le garder à l’écart

d’articles tels qu’attaches trombones, pièces de monnaie,

clous, vis ou autres petits objets métalliques risquant

d’établir le contact entre les deux bornes. La mise en court-

circuit des bornes de piles peut causer des étincelles, des

brûlures ou un incendie.

En cas d’usage abusif, du liquide peut s’échapper des

piles. Éviter tout contact avec ce liquide. En cas de contact

accidentel, rincer immédiatement les parties atteintes avec

de l’eau. En cas d’éclaboussure dans les yeux consulter un

médecin. Le liquide s’échappant des piles peut causer des

irritations ou des brûlures.

DÉPANNAGE

Les réparations doivent être confiées à un technicien qualifié,

utilisant exclusivement des pièces identiques à celles

d’origine. Ceci assurera le maintien de la sécurité de l’outil.

5 — Français

SYMBOLES

Les termes de mise en garde suivants et leur signification ont pour but d’expliquer le degré de risques associé à l’utilisation

de ce produit.

SYMBOLE SIGNAL SIGNIFICATION

DANGER:

Indique une situation extrêmement dangereuse qui, si elle n’est pas évitée,

aura pour conséquences des blessures graves ou mortelles.

AVERTISSEMENT :

Indique une situation potentiellement dangereuse qui, si elle n’est pas évitée,

pourrait entraîner des blessures graves ou mortelles.

ATTENTION :

Indique une situation potentiellement dangereuse qui, si elle n’est pas évitée,

pourraît entraîner des blessures légères ou de gravité modérée.

AVIS :

(Sans symbole d’alerte de sécurité) Indique une information importante

ne concernant pas un risque de blessure comme une situation pouvant

occasionner des dommages matériels.

Certains des symboles ci-dessous peuvent être utilisés sur ce produit. Veiller à les étudier et à apprendre leur signification.

Une interprétation correcte de ces symboles permettra d’utiliser l’outil plus efficacement et de réduire les risques.

SYMBOLE NOM DÉSIGNATION / EXPLICATION

Alerte de sécurité Indique un risque de blessure potentiel.

Lire le manuel d’utilisation

Pour réduire les risques de blessures, l’utilisateur doit lire et

veiller à bien comprendre le manuel d’utilisation avant d’utiliser

ce produit.

Protection oculaire

Toujours porter une protection oculaire avec écrans latéraux

certifiée conforme à la norme ANSI Z87.1. Porter la protection de

tête en fonctionnant cet produit au-dessus du niveau d’épaule.

Avertissement concernant l’humidité Ne pas utiliser dans endroits mouillés ou humides.

Symbole pluie Ne pas exposer à la pluie.

Symbole mains à l’écart

Le non-respect de cette mise en garde peut entraîner des

blessures graves.

La tenir à l’écart de lignes électriques

et ne laisser personne s’approcher

DANGER ! Risque d’électrocution ! Ne pas travailler à moins de

15m (50 pi) de lignes électriques. Ne jamais laisser quiconque

se tenir à moins de 15 m (50 pi) de l’outil.

Gants

Porter des gants antidérapants épais lors de la manipulation

des lames.

Tenir la scie à deux mains Tenir la taille-haies à deux mains et l’utiliser correctement.

Pièces en mouvement Garder les mains à l’écart des pièces en mouvement.

Choc électrique

Ne pas utiliser l’équipement dans des conditions sèches et ne

pas respecter des méthodes sans danger peut entraîner un

choc électrique.

La page est en cours de chargement...

Ryobi RY40860 Manuel utilisateur

Marque: Ryobi

Modèle: RY40860

Catégorie: Taille-haies sans fil

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Ryobi RY40860 User manual
español: Ryobi RY40860 Manual de usuario

Ryobi RY40860 Manuel utilisateur

Ce manuel convient également à

Ryobi RY40860 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents