Sylvania NB500SL9 Manuel utilisateur

Playback Function Setup OthersIntroduction Connections

IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER

READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR

VISIT OUR WEB SITE AT http://www.sylvania-ce.com

Blu-ray Disc Player

Owner’s Manual

NB500SL9

E5H40UD_NB500SL9_EN.indd 1E5H40UD_NB500SL9_EN.indd 1 2008/04/22 15:22:362008/04/22 15:22:36

1. Connections

Follow to the back side of this sheet.

NB500SL9

Blu-ray Disc Player

This unit is compatible to play back the following discs / files.

Playable discs Logos

Blu-ray Disc

- BD-video (single / double layer)

- BD-RE ver.2.1 (single / double layer)

(Recorded in BDMV format)

- BD-R (single / double layer)

(Recorded in BDMV format)

(Unclosed discs may not be played

back.)

DVD-video

DVD+RW (single layer)

DVD+R (single / double layer)

DVD-RW (finalized discs only)

DVD-R (finalized discs only)

CD-DA (audio CD)

CD-RW

CD-R

Kodak Picture CD

DTS-CD

Playable files Logos

JPEG

DVD, CD-RW/-R,

SD Memory Card (including

SDHC), miniSD Card,

microSD Card

Readable cards Playable files / data

SD Memory Card (8MB - 2GB)

JPEG, picture-in-picture

commentary, subtitles or

other extras for BD-ROM

Profile 1 ver.1.1

SDHC Memory Card (4GB)

miniSD Card (8MB - 2GB)

microSD Card (8MB - 2GB)

For miniSD Card and microSD Card, the adapter is necessary.

miniSD Card adapter

miniSD Card

microSD Card adapter

microSD Card

•

This unit has been designed to play back BD-video with region A and DVD-video with region

“1” or “ALL“.

You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the

symbols on the right on your BD-video or DVD-video. If these region symbols do not appear

on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or

number inside the globe refers to region of the world. A BD-video or DVD-video labeled for a

specific region can only play back on the unit with the same region code.

BD-videoDVD-video

AUDIO/VIDEO CONNECTION

Press [HDMI] to change the resolution of the video signal being output from HDMI OUT jack.

The video resolution changes as follows every time [HDMI] is pressed.

480p 720p 1080i 1080p 1080p24

Note :

• You cannot select the video resolutions which are not supported by the connected TV.

• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI

Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame input.

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

RCA video cable x 1

HDMI cable (High Speed HDMI Cable) x 1

Please purchase the rest of the necessary cables at your

local store.

•

E5H40UD

1VMN25716 / ★★★★★

Printed in China

“Blu-ray Disc“ and are trademarks.

is a trademark of DVD Format/Logo Licensing Corporation.

Make one of the following connections, depending on the capabilities of your existing device.

AUDIO IN

LR

VIDEO

OUT

VIDEO

IN

DVI IN

TV

this unit

and

RCA

audio cable

RCA

video cable

RCA component

video cable

Method 2

COMPONENT VIDEO OUT

Method 1

VIDEO OUTAUDIO OUT

Method 3

HDMI OUT

HDMI-DVI

cable

AUDIO CONNECTION

VIDEO CONNECTION

or or

COMPONENT

VIDEO OUT

P

B

/C

B

P

R

/C

R

Y

COMPONENT

VIDEO IN

Y

PB/CB

PR/CR

(Red)

(Blue)

(Green)

(Red)

(Blue)

(Green)

OR

Playable Discs and Files

Region Codes

HDMI Connection

Basic Connections

All devices should be turned off and

disconnected from the power outlet,

when you make the connections.

HDMI IN

HDMI cable

Method 4

this unit TV

BEST

PICTURE

BETTER

PICTURE

STANDARD

PICTURE

STANDARD

AUDIO

Quick Start Guide

BEST

AUDIO /

PICTURE

Quick Start GuideQuick Start Guide

EN EN

E5H40UD_NB500SL9_EN_QG.indd 1E5H40UD_NB500SL9_EN_QG.indd 1 2008/05/07 11:30:302008/05/07 11:30:30

2-Channel Analog Audio Connection

Digital Audio Connection

COAXIAL

DIGITAL AUDIO INPUT

AV receiver/ampli er

DIGITAL OUT (COAXIAL)

digital audio coaxial input jack

digital audio coaxial cable

audio

this unit

After you made all necessary connections, connect the AC cord to the AC IN.

Then connect the AC cord to the AC outlet.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

this unit

AC outlet

AC cord

AC 120V, 60 Hz

2

Turn on the TV and select the

appropriate input on the TV to which

the unit is connected.

5

Press [OPEN / CLOSE A ] to close the

disc tray.

It may take a while to load the disc.

Some discs may start playback automatically.

1

Press [POWER].

3

Press [OPEN / CLOSE A ] to open

the disc tray.

4

Place the disc on the disc tray with

its label side facing up.

Align the disc to the

disc tray guide.

6

Press [PLAY B] to start playback.

For many of BD-video and DVD-video, a menu screen

may appear.

In this case, use [K / L / s / B] to select the desired

item, then press [ENTER].

To pause playback:

Press [PAUSE F ].

To return to normal playback:

Press [PLAY B ].

To stop playback:

Press [STOP C ].

To eject the disc:

Press [OPEN / CLOSE A ] to open the disc tray, then

remove the disc before turning off the unit.

2. Playback1. Connections (cont'd)

Connection to an Audio System

Connecting the AC Cord

stereo system

AUDIO

OUT

L

R

AUDIO IN

LR

analog audio input jacks

RCA audio cable

AUDIO OUT

audio

this unit

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your

local store.

•

Supplied cables used in this connection are as follows:

AC cord x 1•

BETTER

AUDIO

STANDARD

AUDIO

EN EN

HDMI

C

LEAR

A-

B

MO

D

E

P

A

US

E

R

E

V

P

LA

Y

FW

D

SU

BTITL

E

AUDIO

DI

S

PLAY

S

EAR

CH

S

T

O

P

RED

G

REEN

B

LUE YELL

OW

POWER

OPEN/

CLOSE

ENTER

PLAY

STOP

PAU S E

E5H40UD_NB500SL9_EN_QG.indd 2E5H40UD_NB500SL9_EN_QG.indd 2 2008/05/07 11:30:452008/05/07 11:30:45

2

EN

PRECAUTIONS

1. READ INSTRUCTIONS - All the safety and operating instructions should

be read before the apparatus is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instructions should

be retained for future reference.

3. HEED WARNINGS - All warnings on the apparatus and in the operating

instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating and use instructions should be

followed.

5. CLEANING - Unplug this apparatus from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

EXCEPTION: An apparatus that is meant for uninterrupted service and,

that for some specific reason, such as the possibility of the loss of an

authorization code for a CATV converter, is not intended to be unplugged

by the user for cleaning or any other purpose, may exclude the reference

to unplugging the apparatus in the cleaning description otherwise

required in item 5.

6. ATTACHMENTS - Do not use attachments not recommended by the

apparatus manufacturer as they may cause hazards.

7. WATER AND MOISTURE - Do not use this apparatus near water, for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, and the like.

8. ACCESSORIES - Do not place this apparatus on an

unstable cart, stand, tripod, bracket, or table. The

apparatus may fall, causing serious injury to someone,

and serious damage to the apparatus. Use only with a

cart, stand, tripod, bracket, or table recommended by the

manufacturer, or sold with the apparatus. Any mounting

of the apparatus should follow the manufacturer’

s instructions and should use a mounting accessory

recommended by the manufacturer. An apparatus and cart combination

should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the apparatus and cart combination to overturn.

9. VENTILATION - Slots and openings in the cabinet and the back or

bottom are provided for ventilation and to ensure reliable operation of

the apparatus and to protect it from overheating, these openings must

not be blocked or covered. The openings should never be blocked by

placing the apparatus on a bed, sofa, carpet, rug, or other similar surface.

This apparatus should never be placed near or over a radiator or heat

register. This apparatus should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

10. POWER SOURCES - This apparatus should be operated only from the

type of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your apparatus dealer

or local power company. For the apparatus’s intended to operate from

battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION - This apparatus is equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

12. POWER-CORD PROTECTION - Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

apparatus.

13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable

system is connected to the apparatus, be sure the antenna or cable

system is grounded so as to provide some protection against voltage

surges and built-up static charges. Article 810 of the National Electrical

Code, ANSI/NFPA No. 70, provides information with respect to proper

grounding of the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding conductors, location

of antenna-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMP

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

14. LIGHTNING - For added protection for this apparatus receiver during a

lightning storm, or when it is left unattended and unused for long periods

of time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the apparatus due to lightning

and power-line surges.

15. POWER LINES - An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light of power circuits,

or where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be fatal.

16. OVERLOADING - Do not overload wall outlets and extension cords as this

can result in a risk of fire or electric shock.

17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this

apparatus through openings as they may touch dangerous voltage points

or short out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the apparatus.

18. SERVICING - Do not attempt to service this apparatus yourself as

opening or removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE - Unplug this apparatus from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a. When the power supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the apparatus.

c. If the apparatus has been exposed to rain or water.

d. If the apparatus does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions, as improper adjustment of other controls may

result in damage and will often require extensive work by a qualified

technician to restore the apparatus to its normal operation.

e. If the apparatus has been dropped or damaged in any way.

f. When the apparatus exhibits a distinct change in performance, this

indicates a need for service.

20. REPLACEMENT PARTS - When replacement parts are required, be sure the

service technician uses replacement parts specified by the manufacturer that

have the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, injury to persons or other hazards.

21. SAFETY CHECK - Upon completion of any service or repairs to this

apparatus, ask the service technician to perform routine safety checks to

determine that the apparatus is in proper operating condition.

22. HEAT - This apparatus should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including amplifiers)

that produce heat.

The model and serial numbers of this unit may be found on the cabinet.

You should record and retain those numbers for future reference.

Serial No.:

Model No.:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the apparatus.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

apparatus’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The caution marking is located on the rear or bottom of the cabinet.

Important Safeguards

E5H40UD_NB500SL9_EN.indd 2E5H40UD_NB500SL9_EN.indd 2 2008/04/14 13:57:052008/04/14 13:57:05

3

EN

Playback Function Setup Others

Introduction

Connections

PRECAUTIONS

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing

or climbing on it. A falling unit can cause serious injury or even death.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause

harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority

to operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful

interference to radio or television reception, which can be determined by turning the apparatus off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the

grounding system of the building as close to the point of cable entry as practical.

LASER SAFETY

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this

apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure.

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.

LOCATION: Inside, near the deck mechanism.

ABOUT COPYRIGHT

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product

incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other

limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is

prohibited.

E5H40UD_NB500SL9_EN.indd 3E5H40UD_NB500SL9_EN.indd 3 2008/04/14 13:57:062008/04/14 13:57:06

4

EN

PRECAUTIONS

Maintenance

Servicing

Please refer to relevant topics on “TROUBLESHOOTING” on

page 43 before returning the product.

If this unit becomes inoperative, do not try to correct the

problem by yourself. There are no user-serviceable parts

inside. Turn off, unplug the power plug, and please call our

toll free customer support line found on the cover of this

manual to locate an authorized service center.

Cleaning the cabinet

Wipe the front panel and other exterior surfaces of the

unit with a soft, slightly damp cloth.

Never use a solvent, thinner, benzene or alcohol to clean

the unit. Do not spray insecticide liquid near the unit. Such

chemicals may discolor the surface or damage the unit.

Cleaning discs

When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center to out. Do not wipe

in a circular motion.

Do not use solvents such as benzine, thinner, commercially

available cleaners, detergent, abrasive cleaning agents or

antistatic spray intended for analog records.

Cleaning the disc lens

If this unit still does not perform properly although you

refer to the relevant sections and to “TROUBLESHOOTING”

in this user manual, the laser optical pickup unit may be

dirty. Consult your dealer or an authorized service center

for inspection and cleaning of the laser optical pickup unit.

Disc handling

Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

Always store the disc in its protective case when it is not

used.

Note that discs with special shapes (heart-shaped discs,

octagonal discs, etc.) cannot be played back on this unit.

Do not attempt to playback such discs, as they may

damage the unit.

IR signal check

If the remote control is not working properly, you can

use an AM radio or digital camera (including a cellular

phone with built-in camera) to see if it is sending out an

infrared signal.

With an AM radio:

Tune the AM radio station to a non-

broadcasting frequency. Point the

remote control towards it, push any

button and listen. If the sound from

the radio flutters, it is receiving the

remote control’s infrared signal.

With a digital camera

(including built-in cell

phone cameras):

Point a digital camera towards the remote

control. Push any button on the remote

control and look through the digital

camera. If the infrared light appears

through the camera, the remote control is

working.

•

Supplied Accessories

remote control

with batteries

(AAx2) (NB804UD)

RCA audio /

video cables

(WPZ0102TM015 /

WPZ0102LTE01)

AC cord

(WAV0162LW001)

HDMI cable (High Speed HDMI Cable)

(WPZ0202AP001)

owner’s manual (EN/ES/FR)

(1VMN25713 / 1VMN25714

/ 1VMN25715)

quick start guide (EN/ES/FR)

(1VMN25716 / 1VMN25717)

Owner’s Manual

To Avoid the Hazards of Electrical Shock and Fire

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it

from an AC outlet. Grasp it by the plug.

Do not put your fingers or objects into the unit.

Installation Location

For safety and optimum performance of this unit:

Install the unit in a horizontal and stable position. Do

not place anything directly on top of the unit. Do not

place the unit directly on top of the TV.

Shield it from direct sunlight and keep it away from

devices of intense heat. Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat

dissipation. Do not block the ventilation holes on the

back and sides of the unit. Avoid locations subject to

strong vibration or strong magnetic fields.

Be sure to remove the disc and unplug the AC power

cord from the outlet before carrying the unit.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it

is moved from a cold place to a warm place or after

heating a cold room or under conditions of high

humidity. Do not use this unit at least for 2 hours until its

inside gets dry.

Note about Recycling

This unit’s packaging materials are recyclable

and can be reused. Please dispose of any

materials in accordance with your local

recycling regulations.

Batteries should never be thrown away or

incinerated but disposed of in accordance with your

local regulations concerning chemical wastes.

•

E5H40UD_NB500SL9_EN.indd 4E5H40UD_NB500SL9_EN.indd 4 2008/04/14 13:57:062008/04/14 13:57:06

5

EN

Playback Function Setup Others

Introduction

Connections

PRECAUTIONS

Trademark Information

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &

other U.S. and worldwide patents issued & pending. DTS

and DTS Digital Surround are registered trademarks and

the DTS logos and Symbol are trademarks of DTS, Inc.

“Blu-ray Disc“ and

are trademarks.

is a trademark of DVD Format/Logo Licensing

Corporation.

Java and all other Java trademarks and logos are

trademarks or registered trademarks of Sun Microsystems,

Inc. in the United States and / or other countries.

Product that have earned ENERGY STAR

®

are designed to

protect the environment through superior energy

efficiency.

is trademark of Eastman Kodak Company.

downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent

of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly

prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content

herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without

the express written consent of Funai. All other trademarks used herein remain the exclusive property of their

respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any

license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this

manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the

law.

E5H40UD_NB500SL9_EN.indd 5E5H40UD_NB500SL9_EN.indd 5 2008/04/14 13:57:072008/04/14 13:57:07

6

EN

CONTENTS

Introduction

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . .7

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connections

CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connection to the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connection to an Audio System . . . . . . . . . . . . . . . . . . . 15

Connecting the AC Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Playback

INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 17

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Operations Using Title Menu, Disc Menu,

and Pop-up Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Playing Back a VR mode DVD-RW/-R . . . . . . . . . . . . . . . 21

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Playing Back an audio CD and a Disc with

JPEG Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Reading the SD Memory Card . . . . . . . . . . . . . . . . . . . . . 23

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Fast Forward / Fast Reverse. . . . . . . . . . . . . . . . . . . . . . . . 25

Slow Forward Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

A-B Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

PIP (Picture in Picture) Setting . . . . . . . . . . . . . . . . . . . . . 26

Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Camera Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

SPECIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 29

Setting the BD Audio Mode . . . . . . . . . . . . . . . . . . . . . . . 30

Adjusting the Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Function Setup

FUNCTION SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Others

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back Cover

E5H40UD_NB500SL9_EN.indd 6E5H40UD_NB500SL9_EN.indd 6 2008/04/14 13:57:082008/04/14 13:57:08

7

EN

Playback Function Setup Others

Introduction

Connections

FEATURES

Features

Full high-definition video playback

Watch movies in the highest picture quality available for

your HDTV. This unit offers full high-definition video

playback up to 1080p resolution for an amazing viewing

experience. A highly detailed picture and increased

sharpness delivers a more true-to-life picture.

Upconvert DVD for enhanced picture quality

Your current DVD will look even better than before

thanks to video upconversion. Upconversion will increase

the resolution of standard definition DVD to high

definition up to 1080p over an HDMI connection. The

picture will be less jagged and more realistic for a near

high-definition experience.

Enjoy your content on different kinds of media

Full backwards compatibility with DVD, CD ensures that

you can continue to enjoy your current audio-video

collection. Additionally, you can view JPEG.

Listen to the rich multi-channel surround sound

Multi-channel surround sound, which realizes real-to-life

sound and makes you feel that you are really there.

Easy and simple connection to your HDTV via HDMI

Connect this unit to your HDTV with one single HDMI

(high definition multimedia interface) cable. It is

recommended to use High Speed HDMI Cable for better

compatibility. The high definition video output signal will

be transferred to your HDTV without conversion to

analogue signals, so you will get an excellent picture and

sound quality, completely free from noise.

Thanks to other multiple outputs, you can also easily

connect to your home theater system or amplifier.

PIP

Some BD-video have the PIP (picture-in-picture) function

which enables you to display the secondary video in the

primary video. You can call up the secondary video by

pressing [PIP] whenever the scene contains the

secondary video.

Pop-up menu

Some BD-video have pop-up menu which is a navigation

menu that can be called up and be operated on the TV

screen without interrupting the playback. You can call up

the pop-up menu by pressing [POP MENU / MENU].

Contents in the pop-up menu vary depending on the

disc.

HDMI Deep Color

Deep Color reduces the posterization effect of the

playback image. Refer to “HDMI Deep Color” in

“FUNCTION SETUP” on page 34.

HDMI

1080p / fps output (BD only)

This unit is equipped with the feature which can provide

the smooth movement in the playback of film originated

material with the frame rate of 24 frames per second with

progressive. (Available only when the TV is connected by

an HDMI cable and compatible with 1080p24 frame

input.)

Refer to “HDMI Video Resolution” in “FUNCTION SETUP”

on page 34.

Playing back the contents in SD Memory Card

You can play back JPEG stored in an SD Memory Card.

You can store picture-in-picture commentary, subtitles or

other extras for BD-ROM Profile 1 ver.1.1 files in an SD

Memory Card and play back with the BD-video.

Symbols Used in this Manual

To specify for which media type each function is, we put

the following symbols at the beginning of each item to

operate.

Symbol Description

Description refers to BD-video and

BD-RE (ver. 2.1) / BD-R recorded in BDMV

format

Description refers to DVD-video

Description refers to DVD-RW/-R recorded in

VR mode

Description refers to audio CD / DTS-CD

Description refers to DVD, CD-RW/-R and

SD Memory Card with JPEG files

If you do not find any of the symbols listed above under

the function heading, the operation is applicable to all

media.

E5H40UD_NB500SL9_EN.indd 7E5H40UD_NB500SL9_EN.indd 7 2008/04/14 13:57:082008/04/14 13:57:08

8

EN

FUNCTIONAL OVERVIEW

The unit can also be turned on by pressing these buttons.*

1. Disc tray

Place a disc when opening the disc tray.

2. A OPEN/CLOSE button*

Press to open or close the disc tray.

3. Display

Refer to “Front Panel Display” on page 11.

4. C STOP button

Press to stop playback.

5. k PAUSE button

Press to pause playback.

6. B PLAY button*

Press to start or resume playback.

•

7. SD card slot

Insert an SD Memory Card, and play back the

contents in it.

8. Infrared sensor window

Receive signals from your remote control so that

you can control the unit from a distance.

9. POWER indicator

This indicator lights up in blue when the power is

on and turns off when the power is off.

10. POWER button

Press to turn the unit on or off.

•

1. COMPONENT VIDEO OUT jacks

Use to connect a TV with component video inputs

with an RCA component video cable.

2. HDMI OUT jack

Use to connect a TV with an HDMI compatible port

with an HDMI cable.

3. AUDIO OUT jacks

Use to connect a TV, an AV receiver / amplifier or

other device with an RCA audio cable.

4. DIGITAL OUT (COAXIAL) jack

Use to connect an AV receiver / amplifier, Dolby

Digital / DTS decoder or other device with a digital

audio coaxial input jack with a digital audio coaxial

cable.

•

5. AC IN Terminal

Use to connect the AC outlet with the AC cord.

6. VIDEO OUT jack

Use to connect a TV, an AV receiver or other device

with an RCA video cable.

Note

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

This unit does not have the RF modulator.

•

2

3 4 5

1

6

1 2* 3 4 5 6* 7 8 9

10

Front Panel

Rear Panel

E5H40UD_NB500SL9_EN.indd 8E5H40UD_NB500SL9_EN.indd 8 2008/04/15 10:57:452008/04/15 10:57:45

9

EN

Playback Function Setup Others

Introduction

Connections

FUNCTIONAL OVERVIEW

OPEN/

CLOSE

HDMIPOWER

SETUP

TOP MENU

RETURN

POP MENU/

MENU

CLEAR

ANGLE

PIP

A-B

REPEAT

ENTER

MODEPAU S E

SKIP STOP

REV PLAY FWD

SKIP

SUBTITLE

AUDIO

DISPLAY

SEARCH

RED GREEN BLUE YELLOW

16

17

18

2

3

19

21

23

24

26

25

27

28

22

6

4

5

8

9

12

13

10

7

11*

1

14

15*

20

* The unit can also be turned on by pressing these buttons.

1. DISPLAY button

Press to display the on-screen display menu.

2. POWER button

Press to turn the unit on or off.

3. Number buttons

Press to enter the title, chapter, track or file

number.

Press to enter values in the input field.

4. SEARCH button

Press to display the search menu.

5. RED / GREEN / BLUE / YELLOW button

Press to select items on some BD menus.

6. TOP MENU button

Press to display the top menu.

7. Cursor K / L / { / B buttons

Press to select items or settings.

8. SETUP button

Press to display the setup menu.

9. SUBTITLE button

Press to display the subtitle menu.

10. REV E button

During playback, press to fast reverse the playback.

•

11. PLAY B button*

Press to start playback or resume playback.

12. SKIP H button

During playback, press once to return to the

beginning of the current title, chapter or track.

During the JPEG playback, press to return to the

previous file.

During playback, press twice to return to the

previous title, chapter or track.

13. PAUSE F button

Press to pause playback.

When playback is in pause mode, press repeatedly

to forward the playback step by step.

14. HDMI button

Press to set the HDMI output mode.

15. OPEN/CLOSE A button*

Press to open or close the disc tray.

16. PIP button

Press to switch picture-in-picture feature on or off

(only applicable to BD-video which supports the

PIP function).

17. ANGLE button

Press to access various camera angles on the disc.

Press to rotate the JPEG files clockwise by 90

degrees.

18. REPEAT button

Press to toggle between various repeat modes.

19. A-B button

Press to play back a defined section between point

A and B repeatedly.

20. CLEAR button

Press to clear the information once entered, to

clear the marker settings, or to cancel the

programming for audio CD, etc.

21. POP MENU/MENU button

Press to display the pop-up menu / disc menu / file list.

Press to change “Original” and “Playlist” on the TV

screen.

22. ENTER button

Press to confirm or select menu items.

23. RETURN

button

Press to return to the previously displayed menu

screen.

24. AUDIO button

Press to display the audio menu.

25. FWD D button

During playback, press to fast forward the

playback.

In pause mode, press to slow forward the playback.

26. STOP C button

Press to stop playback.

27. SKIP G button

During playback, press to skip to the next title,

chapter, track or file.

28. MODE button

During playback, press to display the picture

adjustment menu.

During the JPEG playback, press to display menus

for changing the visual effect for switching the

image or changing the size of the image.

In stop mode with BD inserted, press to display a

menu for setting the BD audio mode.

In stop mode with audio CD, or JPEG files inserted,

press to display menus for program and random

playback.

•

Remote Control

E5H40UD_NB500SL9_EN.indd 9E5H40UD_NB500SL9_EN.indd 9 2008/04/14 13:57:092008/04/14 13:57:09

10

EN

FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

Install the batteries (AAx2) matching the polarity

indicated inside battery compartment of the remote

control.

1 Open the cover.

2 Insert batteries.

Make sure to match + and - on the batteries to the

marks indicated in the battery compartment.

3 Close the cover.

Note

Incorrect use of batteries can result in hazards such as

leakage and bursting. Please observe the following:

Do not mix new and old batteries together.

Do not use different kinds of batteries together.

Although they may look similar, different batteries

may have different voltages.

Make sure that the + and - ends of each battery

match the indications in the battery compartment.

Remove batteries from battery compartment that is

not going to be used for a month or more.

When disposing of used batteries, please comply with

governmental regulations or environmental public

instruction’s rules that apply in your country or area.

Do not recharge, short-circuit, heat, burn or

disassemble batteries.

•

Using a Remote Control

Keep in mind the following when using the remote

control:

Make sure that there are no obstacles between the

remote control and the infrared sensor window on the

unit.

Remote operation may become unreliable if strong

sunlight or fluorescent light is shining on the infrared

sensor window of the unit.

Remote control for different devices can interfere with

each other. Avoid using remote control for other device

located close to the unit.

Replace the batteries when you notice a fall off in the

operating range of the remote control.

The maximum operable ranges from the unit are as

follows.

Line of sight: approx. 23 feet (7m)

Either side of the center: approx. 16 feet (5m) within 30°

Above: approx. 16 feet (5m) within 15°

Below: approx. 10 feet (3m) within 30°

30˚30˚

16 feet

(5m)

23 feet

(7m)

16 feet

(5m)

•

-

E5H40UD_NB500SL9_EN.indd 10E5H40UD_NB500SL9_EN.indd 10 2008/04/14 13:57:092008/04/14 13:57:09

11

EN

Playback Function Setup Others

Introduction

Connections

FUNCTIONAL OVERVIEW

Front Panel Display

1 2

Brightness of the display can be adjusted. Refer to “Panel Display” in “FUNCTION SETUP” on page 41.

1. Displays playback status icon. Refer to the table below.

2. Displays various kinds of information such as title number, elapsed time, repeat mode, etc.

Playback status icon

Mode

Disc SD Memory Card

Playback is in progress

Stop mode

Pause mode

-

Fast forward mode

-

Fast reverse mode

-

Slow forward mode

Appears while repeat function is set

Example of Display Message

Title is being played back.

Indicating the current title number and the elapsed time.

Current chapter is in chapter repeat mode.

Loading a disc.

Dolby Digital audio is being played back.

•

E5H40UD_NB500SL9_EN.indd 11E5H40UD_NB500SL9_EN.indd 11 2008/04/14 13:57:102008/04/14 13:57:10

12

EN

CONNECTIONS

Connection to the TV

Make one of the following connections, depending on the capabilities of your existing device.

COMPONENT

VIDEO OUT

P

B

/C

B

P

R

/C

R

Y

COMPONENT

VIDEO IN

Y

PB/CB

PR/CR

AUDIO IN

LR

VIDEO

OUT

VIDEO

IN

HDMI IN

DVI IN

and oror or

*

1, 2

TV

this unit

standard audio

RCA

audio cable

AUDIO CONNECTION AUDIO / VIDEO

CONNECTION

HDMI

cable

best audio / picture

Method 4

VIDEO CONNECTION

RCA

video

cable

Method 1

standard picture

HDMI-DVI

cable

Method 3

*

1

best picture

RCA

component

video cable

better picture

AUDIO OUT HDMI OUTVIDEO OUT COMPONENT

VIDEO OUT

Method 2

*

1

(Red)

(Blue)

(Green)

(Red)

(Blue)

(Green)

*

1

This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures

than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer

to “HDMI Video Resolution” or “Component Output” setting on page 34 to set the video resolution.

*

2

Analog audio connection is not required for this connection.

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

RCA video cable x 1

HDMI cable (High Speed HDMI Cable) x 1

Please purchase the rest of the necessary cables at your local store.

•

Note

Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be

distorted due to the copy-protection system.

If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,

press and hold [ B PLAY] on the front panel for more than 5 seconds. “HDMI Video Resolution” and “Component

Output” setting will be reset to the default automatically. You cannot change the video resolution during Blu-ray

Disc playback. To change the resolution, stop playback.

A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) jack allows

digital transfer of both digital video signals and multi-channel audio signals.

•

E5H40UD_NB500SL9_EN.indd 12E5H40UD_NB500SL9_EN.indd 12 2008/04/14 13:57:112008/04/14 13:57:11

13

EN

Playback Function Setup OthersIntroduction

Connections

HDMI Output Mode and Actual Output Signals

Press [HDMI] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution

changes as follows every time [HDMI] is pressed.

Front Panel

Display

HDMI Video Resolution

480 Progressive

Press [HDMI]

720 Progressive

Press [HDMI]

1080 Interlaced

Press [HDMI]

1080 Progressive

Press [HDMI]

1080 Progressive 24 24 frame

Press [HDMI]

Copyright protection system

To play back the digital video images of a BD / DVD via an HDMI connection, it is necessary that both the unit and

the TV (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content

protection system). HDCP is copy protection technology that comprises data encryption and authentication of the

connected AV device. This unit supports HDCP. Please read the operating instructions of your TV (or AV amplifier)

for more information.

Note

When using HDCP-incompatible TV, the image will not be viewed properly.

Among the devices that support HDMI, some devices can control other devices via the HDMI jack, this unit cannot

be controlled by another device via the HDMI jack.

The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length)

maybe limited by the device that is connected.

Among the devices that support HDMI, some do not support audio output (e.g, projectors). In connections with

device such as this unit, audio signals are not output from HDMI OUT jack.

You cannot select the video resolutions which are not supported by the connected TV, except when this unit’s

HDMI OUT jack is connected to a DVI compatible display devices with an HDMI-DVI cable.

For HDMI OUT jack to DVI connection, after you select an HDMI output mode, corresponding HDMI video

resolution will be output. The HDMI video resolution you selected will be output even if the connected TV is not

compatible with the HDMI video resolution. If there is no image displayed on the connected TV, please select

another HDMI video resolution.

Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.

You cannot change the video resolution during Blu-ray Disc playback. To change the resolution, stop playback.

You can also change the HDMI output mode from “HDMI Video Resolution” setting in “Video” menu. In this menu,

you can confirm what HDMI video resolutions are supported by connected TV. Refer to page 34.

In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High

Speed HDMI Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame

input.

Even if you set “HDMI Video Resolution” setting to “1080p24”, when the contents of the disc is not compatible for

1080p24 frame, 1080p60 frame will be output.

There is no output from VIDEO OUT and COMPONENT VIDEO OUT jacks when you play back a BD that recorded

24-frame film material by HDMI output mode of 1080p24.

It is recommended to use High Speed HDMI Cable (also known as HDMI category 2 cable) for better compatibility.

•

CONNECTIONS

E5H40UD_NB500SL9_EN.indd 13E5H40UD_NB500SL9_EN.indd 13 2008/04/18 16:34:552008/04/18 16:34:55

14

EN

CONNECTIONS

HDMI Audio Setting

When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the

device to be connected.

Device to be connected “HDMI Audio Out” setting Output HDMI audio signal

Device compatible with Dolby Digital,

Dolby Digital Plus, Dolby TrueHD, DTS

or DTS-HD decoding

HDMI Multi (Normal) Dolby Digital, Dolby Digital Plus, Dolby

TrueHD, DTS, or DTS-HD bitstream are

output from HDMI OUT jack. Make the

speaker settings on the connected AV

amplifier, etc.

Device compatible with 3 or more

channels of audio inputs (not Dolby

Digital, Dolby Digital Plus, Dolby

TrueHD, DTS or DTS-HD compatible)

HDMI Multi (LPCM) Multi-channel audio signals are output

from HDMI OUT jack. Make the speaker

settings with the speaker setting items

appear after you select “HDMI

Multi(LPCM)”. Refer to page 36.

HDMI connection to a TV, and digital

audio connection (coaxial) to an AV

amplifier.

Audio Mute HDMI audio will be muted, and Dolby

Digital / DTS bitstream or LPCM will be

output from DIGITAL OUT jack

depending on “Digital Out” setting.

Refer to page 37.

Audio signals output from HDMI OUT jack

Disc type Audio recording format

“HDMI Audio Out” setting

HDMI Multi(Normal) HDMI Multi(LPCM)

BD-video

Dolby Digital Dolby Digital*

1

Multi LPCM

Dolby Digital Plus Dolby Digital Plus*

1

Multi LPCM*

2

Dolby TrueHD Dolby TrueHD*

1

Multi LPCM*

3

DTS DTS*

1

Multi LPCM

DTS-HD DTS-HD*

1

Multi LPCM*

4

LPCM Multi LPCM Multi LPCM

DVD-video /

DVD-RW/-R

(VR mode)

Dolby Digital Dolby Digital Multi LPCM

DTS DTS Multi LPCM

LPCM Multi LPCM Multi LPCM

audio CD 2ch LPCM 2ch LPCM

DTS-CD DTS Multi LPCM

*

1

If “BD Audio Mode” setting is set to “Mix Audio Output”, audio will be output as multi LPCM. Refer to page 36.

*

2

Outputs audio signals decoded from independent substream.

*

3

Outputs audio signals decoded from Dolby Digital stream.

*

4

Outputs audio signals decoded from DTS core stream.

If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel

down-mixed LPCM depending on the capability of the connected device even if you select “HDMI Multi(Normal)” in

“HDMI Audio Out” setting. Refer to page 36.

■

•

E5H40UD_NB500SL9_EN.indd 14E5H40UD_NB500SL9_EN.indd 14 2008/04/14 13:57:132008/04/14 13:57:13

15

EN

Playback Function Setup OthersIntroduction

Connections

CONNECTIONS

Connection to an Audio System

When you change the connections, all devices should be turned off.

Refer to the manual accompanying external devices for more information.

2-Channel Analog Audio Connection

AUDIO

OUT

L

R

AUDIO IN

LR

analog audio input jacks

RCA audio cable

audio

this unit

AUDIO OUT

stereo system

Digital Audio Connection

COAXIAL

DIGITAL AUDIO INPUT

digital audio coaxial

input jack

digital audio coaxial cable

audio

this unit

DIGITAL OUT (COAXIAL)

AV receiver / amplifier

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

•

E5H40UD_NB500SL9_EN.indd 15E5H40UD_NB500SL9_EN.indd 15 2008/04/14 13:57:132008/04/14 13:57:13

16

EN

CONNECTIONS

Audio signals output from DIGITAL OUT jack (COAXIAL)

The audio signals currently output from HDMI OUT jack will be output from DIGITAL OUT jack as well, except that

Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output

instead of DTS-HD.

When “Audio Mute” is selected in “HDMI Audio Out” setting, audio signals output from HDMI OUT jack will be muted

and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.

To set “Digital Out” setting, select “Audio Mute” in “HDMI Audio Out” setting.

Disc type Audio recording format

“Digital Out” setting

Bitstream LPCM

BD-video

Dolby Digital Dolby Digital 2ch Downmix LPCM

Dolby Digital Plus Dolby Digital 2ch Downmix LPCM

Dolby TrueHD Dolby Digital 2ch Downmix LPCM

DTS DTS* 2ch Downmix LPCM

DTS-HD DTS* 2ch Downmix LPCM

LPCM 2ch Downmix LPCM* 2ch Downmix LPCM

DVD-video /

DVD-RW/-R

(VR mode)

Dolby Digital Dolby Digital 2ch Downmix LPCM

DTS DTS 2ch Downmix LPCM

LPCM 2ch Downmix LPCM 2ch Downmix LPCM

audio CD 2ch LPCM 2ch LPCM

DTS-CD DTS 2ch Downmix LPCM

* For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions

listed below are met:

When “BD Audio Mode” setting is set to “Mix Audio Output”.

When “HDMI Audio Out” setting is set to “Audio Mute”.

When “Digital Out” setting is set to “Bitstream”.

If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.

This table applies only when HDMI cable is not connected or “Audio Mute” is selected in “HDMI Audio Out” setting.

Note

In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio

Mode” setting to “Mix Audio Output” and set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.

•

Connecting the AC Cord

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC

outlet.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

this unit

AC cord

AC 120V, 60 Hz

AC outlet

Supplied cables used in this connection are as follows:

AC cord x 1•

■

•

E5H40UD_NB500SL9_EN.indd 16E5H40UD_NB500SL9_EN.indd 16 2008/04/14 13:57:142008/04/14 13:57:14

17

EN

Connections

Playback

Function Setup Others

Introduction

INFORMATION ON PLAYBACK

Before you start playing back a disc, read the following information.

Playable Discs and Files

This unit is compatible to play back the following discs /

files.

To play back a disc / file, make sure that it meets the

requirements for region codes and color systems as

described below. You can play back discs that have the

following logos. Other disc types are not guaranteed to

play back.

Playable discs Logos

Blu-ray Disc

- BD-video (single / double

layer)

- BD-RE ver.2.1 (single /

double layer)

(Recorded in BDMV format)

- BD-R (single / double layer)

(Recorded in BDMV format)

(Unclosed discs may not be

played back.)

DVD-video

DVD+RW (single layer)

DVD+R

(single / double layer)

DVD-RW (finalized discs only)

DVD-R (finalized discs only)

CD-DA (audio CD)

CD-RW

CD-R

Kodak Picture CD

DTS-CD

Playable files Media

JPEG

DVD, CD-RW/-R,

SD Memory Card

(including SDHC), miniSD

Card, microSD Card

Readable cards Playable files / data

SD Memory Card (8MB - 2GB)

JPEG, picture-in-picture

commentary, subtitles or

other extras for BD-ROM

Profile 1 ver.1.1

SDHC Memory Card (4GB)

miniSD Card (8MB - 2GB)

microSD Card (8MB - 2GB)

Note for SD Memory Cards

Do not remove the SD Memory Card or turn off the

unit while the contents of the card is in playback. It

may result in malfunction or loss of the card’s data.

Please keep the SD Memory Cards in their cases

when you are not using them.

Do not try to open or modify the card.

Do not touch the terminal surface with your fingers

or any metals.

Do not attach additional labels or stickers to cards.

Do not remove the label of the SD Memory Cards.

This unit supports SD Memory Card with FAT12/

FAT16 file system, and SDHC Memory Card with

FAT32 file system.

This unit may not read the SD Memory Cards

formatted on computer. If that is the case, please

reformat the SD Memory Cards in this unit and try

again.

This unit does not supports miniSDHC and

microSDHC Memory Card.

For miniSD Card and microSD Card, the adapter is

necessary.

miniSD Card

adapter

miniSD Card

microSD Card

adapter

microSD Card

Portions of this product are protected under

copyright law and are provided under license by

ARIS / SOLANA / 4C.

•

Unplayable Discs and Files

The following discs will not be played back in this unit.

CD-ROM• CD-I (compact disc-interactive)•

DVD-RAM• VSD (video single disc)•

DVD-audio• BD-RE (ver.1 / ver.3)•

HD DVD• video CD•

unfinalized disc• SVCD•

BD-RE/-R recorded in BDAV format•

DVD / CD / SD Memory Card contains MP3,

Windows Media™ Audio files and DivX®

•

super audio CD - Only the sound on the CD layer can

be heard. The sound on the high-density super audio

CD layer cannot be heard.

•

Playability of dual discs are not guaranteed.•

E5H40UD_NB500SL9_EN.indd 17E5H40UD_NB500SL9_EN.indd 17 2008/04/14 13:57:142008/04/14 13:57:14

18

EN

Color Systems

BD-video and DVD-video are recorded in different color

systems throughout the world. The most common color

system is NTSC (which is used primarily in the United

States and Canada).

This unit employs NTSC color system, so the disc you play

back must be recorded in the NTSC system. You cannot

play back the disc recorded in other color systems.

Region Codes

This unit has been designed to play back

BD-video with region A and DVD-video with

region “1” or “ALL“. You cannot play back

BD-video or DVD-video that are labeled for

other regions. Look for the symbols on the

right on your BD-video or DVD-video.

If these region symbols do not appear on

your BD-video or DVD-video, you cannot

play back the disc in this unit. The letter or

number inside the globe refers to region of

the world. A BD-video or DVD-video labeled

for a specific region can only be played back

in the unit with the same region code.

Structure of Disc / SD Memory Card Contents

The contents of BD / DVD are generally divided into

titles. Titles may be further subdivided into chapters.

title 1 title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

BD / DVD

audio CD are divided into tracks.

audio CD

track 1 track 2 track 3 track 4 track 5

Data discs or SD Memory Cards containing JPEG are

divided into folders, and the folders are subdivided into

files.

group(folder)1 group(folder)2

JPEG

folder (group) 1 folder (group) 2

le (track) 1 le (track) 2 le (track) 3 le (track) 4 le (track) 5

BD-video

DVD-video

BD-video

DVD-video

INFORMATION ON PLAYBACK

On-Screen Display

You can check information about the current disc by

pressing [DISPLAY].

To call the on-screen display menu, press [DISPLAY]

during playback. Every time you press [DISPLAY], the

information changes. Depending on the media, available

information varies.

off A Title / Chapter information

A Title information (elapsed time)

A Title information (remaining time)

A HDMI information A off

off A Chapter information (elapsed time)

A Chapter information (remaining time)

A Title information (elapsed time)

A Title information (remaining time)

A Bit rate information A HDMI information A off

off A Track information (elapsed time)

A Track information (remaining time)

A Disc information* (elapsed time)

A Disc information* (remaining time)

A HDMI information A off

(*not available during program / random playback)

off A File name information

A File information A HDMI information A off

For audio CD and JPEG, during program or random

playback, the indication will be displayed after the

track / file information.

•

E5H40UD_NB500SL9_EN.indd 18E5H40UD_NB500SL9_EN.indd 18 2008/04/18 16:34:562008/04/18 16:34:56

La page charge ...

Sylvania NB500SL9 Manuel utilisateur

Ce manuel convient également à

Sylvania NB500SL9 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents