Winmate W07FA3S-PCM1-PoE Manuel utilisateur

7"S-Series HMI

Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz

W07FA3S-PCM1AC-PoE (with LED Light Bar)

W07FA3S-PCM1-PoE (without LED Light Bar)

Slim-line

User Manual

Version 1.1

Document Part Number: 9171111I102D

ii

7” S-Series HMI

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the prior

written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve

design and/or performance. We assume no responsibility or liability for the use of the

described product(s) conveys no license or title under any patent, copyright, or masks

work rights to these products, and make no representations or warranties that these

products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. We make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer

discovers a defect, we will, at his/her option, repair or replace the defective product at

no charge to the customer, provide it is returned during the warranty period of one

year, with transportation charges prepaid. The returned product must be properly

packaged in its original packaging to obtain warranty service. If the serial number and

the product shipping data differ by over 30 days, the in-warranty service will be made

according to the shipping date. In the serial numbers the third and fourth two digits

give the year of manufacture, and the fifth digit means the month (e. g., with A for

October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

7” S-Series HMI

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product. Second,

contact with your distributor, sales representative, or our customer service center for

technical support if you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day.

We are always ready to give advice on application requirements or specific information

on the installation and operation of any of our products.

iv

7” S-Series HMI

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information

or to alert you to the potential for hardware damage or personal injury. These are Notes,

Important, Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to

avoid the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the

potential risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique

grave à la terre incorrecte.

7” S-Series HMI

v

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while

the power is on. Sensitive electronic components can be damaged by

sudden power surges. Only experienced electronics personnel should

open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques sensibles

peuvent être endommagées par des sauts d’alimentation. Seulement du

personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the

CPU card. Modern electronic devices are very sensitive to static electric

charges. As a safety precaution, use a grounding wrist strap at all times.

Place all electronic components in a static-dissipative surface or static-

shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns

sont très sensibles aux décharges d’électricité statique. Toujours utiliser

un bracelet de mise à la terre comme précaution. Placer toutes les

composantes électroniques sur une surface conçue pour dissiper les

charge, ou dans un sac anti-statique lorsqu’elles ne sont pas dans le

chassis.

Safety Precautions

For your safety carefully read all the safety instructions before using the device.

Keep this user manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

 The openings on the enclosure are for air convection and to protect the

equipment from overheating.

vi

7” S-Series HMI

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage

of the power source is correct.

 Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

 If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical

shock.

 Never open the equipment. For safety reasons, only qualified service

personnel should open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following

problems appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work

according to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of

injury.

Utiliser l’appareil de fixation recommandé pour éliminer le

risque de blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product.

When in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

7” S-Series HMI

vii

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne

se décharge pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by the

case or the edge of the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors

or test equipment.

 Keep the work area free of non-conductive materials, such as ordinary

plastic assembly aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners

that are conductive.

 Always put drivers and PCB’s component side on anti-static foam.

viii

7” S-Series HMI

Important Information

Countries/ Area

Symbol

This equipment complies with essential

requirements of:

European Union

Electromagnetic Compatibility

Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous

substances (RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B"

digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at him own expense.

.

7” S-Series HMI

ix

European Union

This equipment is in conformity with the requirement of the following EU legislations

and harmonized standards. Product also complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

x

7” S-Series HMI

About This User Manual

This User Manual provides information about using the Winmate® 7” S-Series HMI with

Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz (Optional Quad Core) processor. This User

Manual applies to the 7” S-Series HMI – W07FA3S-PCM1AC-PoE and W07FA3S-PCM1-PoE.

The documentation set for the 7” S-Series HMI provides information for specific user needs,

and includes:

 7” S-Series HMI Quick Start Guide - describes how to get the box computer up and

running.

 7” S-Series HMI User Manual – contains detailed description on how to use the Panel

PC, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Revision History

Version

Date

Note

1.0

17-Mar-2016

Initial release

1.1

25-Jul-2016

Add Winmate Home Manager AP

1.2

20-Dec-2016

Replace FA33 SBC with FA30-200

7” S-Series HMI

xi

Contents

Preface ......................................................................................................................... ii

About This User Manual ................................................................................................. x

Chapter 1: Introduction ................................................................................................. 1

1.1 Product Features .................................................................................................. 1

1.2 Package Content .................................................................................................. 2

1.3 Schematic and Dimensions .................................................................................. 4

Chapter 2: Getting Started ............................................................................................ 6

2.1 Powering On ......................................................................................................... 6

2.1.1 AC Adapter Components ........................................................................... 6

2.1.2 Power Considerations ............................................................................... 7

2.1.3 Connecting the Power ............................................................................... 7

2.2 Connector Pinouts ............................................................................................... 8

2.2.1 Power Input Connector ............................................................................. 8

2.2.2 Ethernet Connector ................................................................................... 8

2.2.3 Serial Port Connector ................................................................................ 8

2.2.4 USB OTG Connector................................................................................... 9

2.2.5 USB 2.0 Connectors ................................................................................... 9

2.2.6 Micro SD Card Slot ..................................................................................... 9

2.3 Configuring Serial Port Settings ......................................................................... 10

2.4 Turning On and Off ............................................................................................ 12

Chapter 3: Operating the HMI Device ........................................................................... 14

3.1 Operating System ............................................................................................... 14

3.2 Multi-Touch ........................................................................................................ 15

3.3 System Settings .................................................................................................. 16

3.3.1 Setting up the Device .............................................................................. 16

3.3.2 Home Screen ........................................................................................... 16

3.3.3 Quick Settings .......................................................................................... 17

3.3.4 Brightness Adjustment ............................................................................ 18

3.4 Ethernet ............................................................................................................. 19

3.4.1 Configuring Ethernet ............................................................................... 20

xii

7” S-Series HMI

3.4.2 Checking Ethernet ................................................................................... 20

3.5 Testing LED Light Bar .......................................................................................... 21

3.6 Reading NFC Tag ................................................................................................ 22

3.7 Winmate® Home Manager (WHM) ................................................................... 24

3.7.1 How to Lock Applications ........................................................................ 24

3.7.2 How to Unlock Applications .................................................................... 26

3.7.3 How to Change Password ........................................................................ 28

3.8 Using Front Camera ........................................................................................... 29

3.8.1 Camera Menu .......................................................................................... 29

3.8.2 Shooting Photos ...................................................................................... 30

3.8.3 Shooting Videos ....................................................................................... 31

Chapter 4: Software Update ......................................................................................... 33

4.1 Android Debug Bridge (ADB) Driver Installation ............................................... 33

4.1.1 Disabling Driver Signature on Windows 8 ............................................... 34

4.1.2 ADB Driver Installation ............................................................................ 39

4.2 Installing Android Debug Bridge (ADB) .............................................................. 43

4.3 OTA Update Guide ............................................................................................. 44

4.4 OS Image Update Guide ..................................................................................... 47

Chapter 5: Mounting Solutions ..................................................................................... 49

5.1 Cable Mounting Considerations ........................................................................ 49

5.2 Safety Precautions ............................................................................................. 49

5.3 Mounting Guide ................................................................................................. 50

5.3.1 Panel Mounting ....................................................................................... 50

5.3.2 VESA Mounting ........................................................................................ 51

Chapter 6: Technical Support ....................................................................................... 56

6.1 Introduction ....................................................................................................... 56

6.1.1 Winmate Download Center ..................................................................... 56

6.1.2 Winmate File Share ................................................................................. 56

6.1.3 Android Debug Bridge (ADB) ................................................................... 56

6.2 Problem Report Form ........................................................................................ 57

Appendix A: Product Specifications .............................................................................. 59

Appendix B: Supported NFC Tag ................................................................................... 62

7” S-Series HMI

1

Introduction

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with the HMI device in the

packing list. Mechanical dimensions and

drawings included in this chapter.

User Manual Chapter 1 Introduction

7” S-Series HMI

1

Chapter 1: Introduction

Interactive and smart automation systems of intelligent buildings are in a fast growing

phase. Winmate multi-touch S-Series HMI is suitable for home automation and room

management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing

look for any interior. By connecting to centralized database, it can provide real time

update for booking status and available schedule, or perform as a synchronous display in

meetings. Optional 2-megapixel front camera is especially useful in access control

applications.

S-Series HMI runs on Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz (optional Quad Core)

processor and support Android 4.4 and Linux Kernel 3.0.35 operating systems. The HMI

device features P-Cap touch-screen. These models sealed with front IP65 dust and water

proof, and full IP22.

The W07FA3S-PCM1AC-PoE model supports an exceptional feature - LED Light Bar. With

the help of red, green and blue LED indicators you can see the status of the machine or

processes afar. It significantly reduces power consumption by keeping the display turned

off.

1.1 Product Features

Winmate® 7” S-Series HMI features:

 1024 x 600 screen resolution with P-CAP touchscreen

 Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (optional Quad Core)

 Fanless cooling system and Ultra-low power consumption

 Front IP65 water and dust proof; Rear IP22

 Dual Gigabit Ethernet

 LED Status Light Bar on the front side

 Power over Ethernet (PoE)

 Optional 2MP front camera

 Optional NFC Reader

 Stylish design for room booking, access control and room information

applications

User Manual Chapter 1 Introduction

2

7” S-Series HMI

1.2 Package Content

Carefully remove the box and unpack your HMI device. Please check if all the items listed

below are inside your package. If any of these items are missing or damaged contact us

immediately.

Standard factory shipment list

7” HMI Device

Quick Start Guide

(Hardcopy)

Driver CD & User Manual

Varies by product

specifications

9152070I1001

9171111I102P

AC Adapter

(12V/ 50W)

Power Cord

2 Pin Terminal Block

922D050W12VA

Varies by country

94J602G020K0

VESA Mount Screws

VESA Plate

75 x 75 mm

External USB A Type to

Micro USB Cable

913511101145

82W70J17Y700

9487049050K0

User Manual Chapter 1 Introduction

7” S-Series HMI

3

Package may include optional accessories based on your order

VESA Desk Stand

PCVS-V1

VESA Desk Stand

LA-100

VESA Wall Mount Bracket

LA-106

99KK00A0000E

9B0000000128

9B0000000412

For installation instructions and dimensions of optional accessories refer to Ch.5,

“Mounting Guide”.

User Manual Chapter 1 Introduction

4

7” S-Series HMI

1.3 Schematic and Dimensions

Unit: mm

№

Description

№

Description

①

Console Port (for Linux)

⑥

USB2.0 x 1

②

Micro SD Card Slot

⑦

12V DC

③

LAN/ PoE*

⑧

2MP Front Camera (Optional)

④

USB OTG

⑨

1W Speaker

⑤

RS-232/422/485

⑩

LED Status Light Bar**

*Power Device (PD): follows IEEE 802.3at (25 W), IEEE 802.3af (15 W)

**RGB LED light bar only available for the model number W07FA3S-PCM1AC-PoE

7” S-Series HMI

5

Getting Started

This chapter tells you important information on

power supply, adapter and precautions tips.

Pay attention to power considerations.

User Manual Chapter 2 Getting Started

6

7” S-Series HMI

Chapter 2: Getting Started

This chapter provides information on how to connect the HMI device to the source of

power, connector pinouts and the guideline to turn on/off the HMI device.

2.1 Powering On

2.1.1 AC Adapter Components

AC Adapter

(12V/ 50W)

Power Cable

2 Pin Terminal Block

Safety Precautions:

 Do not use the adapter in a high moisture environment

 Never touch the adapter with wet hands or foot

 Allow adequate ventilation around adapter while using

 Do not cover the adapter with paper or other objects that will reduce cooling

 Do not use the adapter while it is inside a carrying case

 Do not use the adapter if the cord is damaged

 There are NO serviceable parts inside

 Replace the unit if it is damaged or exposed to excess moisture

While using the AC Adapter always:

 Plug-in the power cord to easy accessible AC outlet

 Plug-in the AC adapter to a grounded outlet

ALTERNATING CURRENT / MISE À LE TERRE!

This product must be grounded. Use only a grounded AC outlet.

Install the additional PE ground wire if the local installation

regulations require it.

Ce produit doit être mis à la terre. Utiliser seulement un cordon

d’alimentation avec mise à la terre. Si les règlements locaux le

requiert, installer des câbles de mise à la terre supplémentaires.

La page charge ...

Winmate W07FA3S-PCM1-PoE Manuel utilisateur

Ce manuel convient également à

Winmate W07FA3S-PCM1-PoE Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents