Please read this instructions before operating the device and retain them for future reference.
IP65 Stainless P-Cap Panel PC
15/17/19/21.5/23.8”
Intel® Core™ i5-7200U Kaby Lake
Model No.:
R15IK3S-SPC3
R17IK3S-SPA1
R19IK3S-SPM1
W22IK3S-SPA3
W24IK3S-SPA2
Quick Start Guide
Version 1.2
Document Part Number: 91521110102W
2
IP65 Stainless P-Cap Panel PC Quick Start Guide
Contents
Chapter 1: Introduction 6
1.1 Features 6
1.2 Package Content 7
1.3 Product Overview 8
1.3.1 Dimensions 15" 8
1.3.2 Dimensions 17” 8
1.3.3 Dimensions 19” 9
1.3.4 Dimensions 21.5” 9
1.3.5 Dimensions 23.8” 10
1.4 Physical Buttons and LED Indicators 10
1.5 Connectors 11
Chapter 2: Getting Started 12
2.1 Turning On and Off Your Device 12
2.2 How to Enable Watchdog 13
Chapter 3: Installation 14
3.1 Wiring Requirements 14
3.2 Connector Pin Assignments 15
3.2.1 Power Cable 15
3.2.2 Serial Cable 16
3.2.3 Ethernet Cable 17
3.2.4 USB 2.0 Cable 18
3.3 Mounting 19
3.3.1 VESA Mounting 19
3.3.2 Yoke Mounting 20
Appendix 21
Appendix A: Hardware Specifications 21
Appendix B: Cleaning the Monitor 23
Appendix C: Winmate Software Development Kit 23
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
o IEC61000-4-2: 2009
o IEC61000-4-3: 2006+A1: 2007+A2: 2010
o IEC61000-4-4: 2012
o IEC61000-4-5: 2014
o IEC61000-4-6: 2014
o IEC61000-4-8: 2010
o IEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
This equipment is in conformity with the requirement of the following EU legislations and
harmonized standards. Product also complies with the Council directions.
4
IP65 Stainless P-Cap Panel PC Quick Start Guide
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or by
any means, electronic or mechanical, for any purpose, without the prior written permission of the
original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design and/or
performance. We assume no responsibility or liability for the use of the described product(s)
conveys no license or title under any patent, copyright, or masks work rights to these products,
and make no representations or warranties that these products are free from patent, copyright, or
mask work right infringement, unless otherwise specified. Applications that are described in this
manual are for illustration purposes only. We make no representation or guarantee that such
application will be suitable for the specified use without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer discovers a
defect, we will, at his/her option, repair or replace the defective product at no charge to the
customer, provide it is returned during the warranty period of one year, with transportation charges
prepaid. The returned product must be properly packaged in its original packaging to obtain
warranty service. If the serial number and the product shipping data differ by over 30 days, the in-
warranty service will be made according to the shipping date. In the serial numbers the third and
fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for
October, B for November and C for December).
For example, the serial number 1W17Axxxxxxxx means October of year 2017.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of our
distributor to find the update information about the product. Second, contact with your distributor,
sales representative, or our customer service center for technical support if you need additional
assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the installation
and operation of any of our products.
5
Chapter 1: Introduction
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or to
alert you to the potential for hardware damage or personal injury. These are Notes, Important,
Cautions, and Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution/ Attention
A Caution alert indicates potential damage to hardware and explains how to avoid the
potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et explique
comment éviter le problème potentiel.
Warning!/ Avertissement!
An Electrical Shock Warning indicates the potential harm from electrical hazards and
how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.
Safety Information
Warning!/ Avertissement
Always completely disconnect the power cord from your chassis whenever you work
with the hardware. Do not make connections while the power is on. Sensitive
electronic components can be damaged by sudden power surges. Only experienced
electronics personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez sur
celui-ci. Ne pas brancher de connections lorsque l’alimentation est présente. Des
composantes électroniques sensibles peuvent être endommagées par des sauts
d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces chassis.
Caution/ Attention
Always ground yourself to remove any static charge before touching the CPU card.
Modern electronic devices are very sensitive to static electric charges. As a safety
precaution, use a grounding wrist strap at all times. Place all electronic components in
a static-dissipative surface or static-shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant de
toucher la carte CPU. Les équipements électroniques moderns sont très sensibles aux
décharges d’électricité statique. Toujours utiliser un bracelet de mise à la terre comme
précaution. Placer toutes les composantes électroniques sur une surface conçue pour
dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont pas dans le
chassis.
Alternating Current Mise à le terre !
The Protective Conductor Terminal (Earth Ground) symbol indicates the potential risk of
serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à la
terre incorrecte.
6
IP65 Stainless P-Cap Panel PC Quick Start Guide
Chapter 1: Introduction
Congratulations on purchasing Winmate® IP65 Flat Stainless P-CAP Series Panel PC.
Winmate IP65 Flat Stainless P-CAP Series Panel PC is rugged, industrial-grade panel PC series
built to withstand challenging environments, undergoing rigorous testing to ensure safety and top
performance. All of the models in the series are sealed to IP65 standard. Stainless housing
features anti-corrosion properties making it suitable for food, chemical and pharmaceutical
industries. P-CAP multi-touch screen supports glove mode and provides even more convenience
for the operator.
Winmate IP65 Flat Stainless P-CAP Panel PC goes beyond that of the standard industrial panel
computers with elegant, edge-to-edge design, rugged construction, powerful performance, and
flexible mounting options.
The IP65 stainless series work well in food, beverage industry, including food processing
operations and packaging, chemical manufacturing and other industrial applications.
1.1 Features
The IP65 Stainless P-Cap Panel PC features:
Intel® Core™ i5-7200U Kaby Lake 2.5GHz (turbo to 3.1GHz)
SUS 316/ AISI 316 stainless steel for food and chemical industries
Full IP65 waterproof enclosure, good corrosion resistance
A true flat, easy-to-clean front surface with edge-to-edge design
Flat multi-touch panel pc with superior readability and P-CAP technology
Various mounting solutions, Yoke mount and VESA mount
Plenty of I/O s including USB 2.0, RS-232 serial port and RJ45-10/100/1000 LAN ports
Waterproof ports with adapter cables for external connectivity
Supports VESA mount
Supports Rain/ Glove mode (Optional)
7
Chapter 1: Introduction
1.2 Package Content
Carefully remove the box and unpack your device. Please check if all the items listed below are
inside your package. If any of these items are missing or damaged contact us immediately.
Standard shipment list:
Panel PC
Varies by product
specifications
Quick Start Guide
(Hardcopy)
Part No. 91521110100R
Driver CD & User
Manual
Part No. 9171111K102L
AC Adapter
80W: 90PO12080003
Power Cable*
Varies by country
Serial Cable
Part No. 94G0103090Q0
Ethernet Cable
Part No. 94I0080080KF
USB Cable
Part No. 9480108080Q0
VESA Screws
Part No. 913511101101
8
IP65 Stainless P-Cap Panel PC Quick Start Guide
1.3 Product Overview
This section contains mechanical drawing of the Panel PC. Notice that this is a simplified drawing
and some components are not marked in detail.
1.3.1 Dimensions 15"
Unit: mm
Dimensions : 378 x 301 x 56.4
1.3.2 Dimensions 17”
Unit: mm
Dimensions : 412 x 344 x 61.3
9
Chapter 1: Introduction
1.3.3 Dimensions 19”
Unit: mm
Dimensions : 467.4 x 392 x 56.6
1.3.4 Dimensions 21.5”
Unit: mm
Dimensions : 541 x 337 x 53
10
IP65 Stainless P-Cap Panel PC Quick Start Guide
1.3.5 Dimensions 23.8”
Unit: mm
Dimensions : 620 x 390 x 60
1.4 Physical Buttons and LED Indicators
Physical buttons and LED indicators located on the rear side of the Panel PC.
Physical Buttons
Icon
Button
Description
Reset
Press to reset the system
Power On/ Off
Press to power on or power off the device
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity (Data is being read or written)
Off
System is idle
11
Chapter 1: Introduction
1.5 Connectors
IP65 Flat Stainless P-CAP Panel PC has IP65 type connectors with protection
cap.
12
IP65 Stainless P-Cap Panel PC Quick Start Guide
Chapter 2: Getting Started
2.1 Turning On and Off Your Device
To turn on your device:
1. Connect the AC adapter to the DC-in jack connector located on the back side of the
Panel PC.
2. Connect the power cord to AC adapter.
3. Plug the power cord to the AC outlet and the device will turn on automatically.
AC Adapter specifications vary by panel size.
Size
15”
19”
21.5”
23.8”
AC Adapter
12V/ 80W
12V/ 80W
12V/ 80W
12V/ 80W
Power
Consumption*
52W (typ.)
56W (typ.)
66W (typ.)
66W (typ.)
*With maximum backlight and high CPU load.
To turn off your device:
To shut down your device, do the following: Tap Start ( ) > Shut down.
13
Chapter 2: Getting Started
Wait for your Panel PC to completely turn off before disconnecting the power cord (if necessary).
2.2 How to Enable Watchdog
To enable Watchdog, you need to download Winmate Watchdog utility. Find more information on Watchdog
in “Watchdog Guide” that you can download from Winmate Download Center or File Share. Refer to the
User Manual for more details.
To enable watchdog in Watchdog AP follow the instructions below:
1. On the right bottom side of the desktop screen, click triangle button to show hidden icons.
2. Click icon to open Watchdog utility.
3. In Watchdog utility window set countdown time and periodically feed time, or disable watchdog.
Example:
Every 10 min watchdog will monitor the system, in case
any error occurs the system will restart automatically when
the countdown time reaches 0.
Every 9 min watchdog timer will be reset to 10 min.
Setting
Description
Watchdog Countdown
Time
The system automaticity restarts when this countdown time reaches
zero. Default: 10 min
Periodically Feed Time
To set a cycle time to automatically reset watchdog timer.
Default: 9 min
Enable / Disable
Enable or disable watchdog.
Default: Enable
14
IP65 Stainless P-Cap Panel PC Quick Start Guide
Chapter 3: Installation
3.1 Wiring Requirements
The following common safety precautions should be observed before installing any electronic
device:
Strive to use separate, non-intersecting paths to route power and networking wires. If power
wiring and device wiring paths must cross make sure the wires are perpendicular at the
intersection point.
Keep the wires separated according to interface. The rule of thumb is that wiring that
shares similar electrical characteristics may be bundled together.
Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in the system.
Do not run signal or communication wiring and power wiring in the same conduit. To avoid
interference, wires with different signal characteristics (i.e., different interfaces) should be
routed separately.
Be sure to disconnect the power cord before installing and/or wiring your device.
Verify the maximum possible current for each wire gauge, especially for the power cords.
Observe all electrical codes dictating the maximum current allowable for each wire gauge.
If the current goes above the maximum ratings, the wiring could overheat, causing serious
damage to your equipment.
Be careful when handling the unit. When the unit is plugged in, the internal components
generate a lot of heat which may leave the outer casing too hot to touch.
15
Chapter 3: Installation
3.2 Connector Pin Assignments
This Panel PC is equipped with four M25 type connectors which are waterproof. Use only the
cables that are included in the package. The pin assignments of the cables are as follows.
3.2.1 Power Cable
The IP65 Stainless P-Cap Panel PC has M25 type connectors. Use power cable to connect Panel
PC to the source of power.
IP65 Stainless P-Cap Panel PC support 12V DC power input.
16
IP65 Stainless P-Cap Panel PC Quick Start Guide
3.2.2 Serial Cable
The IP65 Stainless P-Cap Panel PC has M25 type serial port connector. Use serial cable to
connect serial interfaces.
17
Chapter 3: Installation
3.2.3 Ethernet Cable
The IP65 Stainless P-Cap Panel PC has M25 type Ethernet connector. Use Ethernet cable to
connect the Panel PC to the Internet.
18
IP65 Stainless P-Cap Panel PC Quick Start Guide
3.2.4 USB 2.0 Cable
The IP65 Stainless P-Cap Panel PC has M25 type USB 2.0 connector. Use USB 2.0 cable to
connect external devices such as mouse or keyboard to the Panel PC.
19
Chapter 3: Installation
3.3 Mounting
The IP65 Flat Stainless P-CAP Panel PC devices come with different mounting options suitable for
most of the industrial and commercial applications.
3.3.1 VESA Mounting
The Panel PC has VESA mount holes on the rear side. Follow instructions below to mount the unit
with VESA Mount bracket (not supplied by Winmate).
Size
VESA Plate
Dimensions
Screw Hole
Diameter
15”, 19”
100 x 100 mm
VESA M4x5 mm
21.5”
100 x 200 mm
VESA M4x5 mm
23.8
100 x 200 mm
VESA M6x8 mm
Mounting Instruction:
1. Screw VESA bracket to the fixture (ex. swing arm) with four VESA screws.
2. Place the device on VESA bracket.
20
IP65 Stainless P-Cap Panel PC Quick Start Guide
3.3.2 Yoke Mounting
Yoke Mount solution allows installing the Panel PC with the bracket (not supplied by Winmate).
Mounting instruction:
1. Place the Panel PC on the bracket stand, aiming screw holes for each other.
2. Secure screws to fix the device upon the bracket stand.
3. Firmly secure the locking handle to the Panel PC.
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Winmate W24IK3S-SPA2 Guide de démarrage rapide
- Taper
- Guide de démarrage rapide
- Ce manuel convient également à
dans d''autres langues
Documents connexes
-
Winmate W22IK3S-SPA3 Manuel utilisateur
-
Winmate W22L100-SPA3 Guide de démarrage rapide
-
Winmate R15ID3S-65A1FTE Guide de démarrage rapide
-
Winmate W22IH3S-SPA3 Guide de démarrage rapide
-
Winmate R19L100-SPM169 Guide de démarrage rapide
-
Winmate R19IH3S-SPM169 Guide de démarrage rapide
-
Winmate R15IB7T-POC3 Guide de démarrage rapide
-
Winmate R15IH3S-67A3 Guide de démarrage rapide
-
Winmate G-Win Series Guide de démarrage rapide
-
Winmate W22IK7T-GCA3 Guide de démarrage rapide
