Please read this instructions before operating the device and retain them for future reference.
10.4~21.5” IP69K Stainless
P-Cap Display
Model No. R10L100-SPT269
R15L100-SPC369
R19L100-SPM169
W22L100-SPA369
Quick Start Guide
For more information on this and
other Winmate products, please
visit our website at:
www.winmate.com
Version 1.0
Document Part Number: 915211101031
IP69K Stainless Display Quick Start Guide Contents
- 2 -
Contents
❶ INTRODUCTION - 7 -
1.1 Features - 7 -
1.2 Package Content - 8 -
1.3 Product Overview - 9 -
1.3.1 Dimensions 10.4" - 9 -
1.3.2 Dimensions 15" - 9 -
1.3.3 Dimensions 19” - 10 -
1.3.4 Dimensions 21.5” - 10 -
1.4 Physical Buttons and LED Indicators - 11 -
1.5 Connectors - 12 -
❷ GETTING STARTED - 13 -
2.1 Turning On and Off the Device - 13 -
❸ INSTALLATION - 14 -
3.1 Wiring Requirements - 14 -
3.2 Connector Pin Assignments - 15 -
3.2.1 Power Cable - 15 -
3.2.2 USB Cable (For Touch) - 16 -
3.2.3 VGA Cable - 16 -
3.2.4 DVI Cable (Optional) - 17 -
3.6 Mounting - 18 -
3.6.1 VESA Mounting - 18 -
3.6.2 Yoke Mounting - 19 -
❹ SPECIFICATIONS - 20 -
APPENDIX - 21 -
Appendix A: Cleaning the Monitor - 21 -
Appendix B: Available Input Signals - 22 -
IP69K Stainless Display Quick Start Guide Preface
- 3 -
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
o IEC61000-4-2: 2009
o IEC61000-4-3: 2006+A1: 2007+A2: 2010
o IEC61000-4-4: 2012
o IEC61000-4-5: 2014
o IEC61000-4-6: 2014
o IEC61000-4-8: 2010
o IEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/
A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the
Council directions.
IP69K Stainless Display Quick Start Guide Preface
- 4 -
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in
any form or by any means, electronic or mechanical, for any purpose, without the
prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order
to improve design and/or performance. We assume no responsibility or liability for
the use of the described product(s) conveys no license or title under any patent,
copyright, or masks work rights to these products, and make no representations
or warranties that these products are free from patent, copyright, or mask work
right infringement, unless otherwise specified. Applications that are described in
this manual are for illustration purposes only. We make no representation or
guarantee that such application will be suitable for the specified use without
further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from
material and workmanship defects for a period of one year from the invoice date.
If the customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during the
warranty period of one year, with transportation charges prepaid. The returned
product must be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by over 30 days,
the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth
digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W17Axxxxxxxx means October of year 2017.
IP69K Stainless Display Quick Start Guide Preface
- 5 -
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business
day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections
lorsque l’alimentation est présente. Des composantes
électroniques sensibles peuvent être endommagées par des sauts
d’alimentation. Seulement du personnel expérimenté devrait ouvrir
ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements
électroniques moderns sont très sensibles aux décharges
d’électricité statique. Toujours utiliser un bracelet de mise à la
terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge, ou
dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.
IP69K Stainless Display Quick Start Guide Preface
- 6 -
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an
example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how
to avoid the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur
des emplacements électriques et comment éviter ces problèmes.
IP69K Stainless Display Quick Start Guide Introduction
- 7 -
❶ INTRODUCTION
Congratulations on purchasing Winmate® IP69K Stainless P-Cap Display.
Winmate flat stainless steel P-Cap Display is designed for applications with high
hygienic requirements. IP69K series is completely waterproof with IP69K level of
protection allowing for easy cleaning and sterilization.
The IP69K stainless series work well in food, beverage industry, including food
processing operations and packaging, chemical manufacturing and other
industrial applications.
1.1 Features
The IP69K Stainless P-Cap Display features:
SUS304 stainless steel for food and chemical industries
Full IP69K waterproof enclosure, good corrosion resistance
A true flat, easy-to-clean front surface with edge-to-edge design
Flat multi-touch panel pc with superior readability and P-CAP technology
Various mounting solutions, Yoke mount and VESA mount
VGA, USB, DVI-D input
Waterproof ports with adapter cables for external connectivity
Supports VESA mount
IP69K Stainless Display Quick Start Guide Introduction
- 8 -
1.2 Package Content
Carefully remove the box and unpack your device. Please check if all the items
listed below are inside your package. If any of these items are missing or
damaged contact us immediately.
Factory shipment list:
Display
Quick Start Guide
(Hardcopy)
R-series AD Board
Manual (Hardcopy)
Varies by product
specifications
915211101031
91521112100C
AC Adapter
Power Cable*
VGA Cable
50W 90PO12050002
80W 90PO12080003
Varies by country
944115010000
USB Cable (For Touch)
DVI Cable (Optional)
VESA Screws
948704010000
9455255250Q1
913511101101
IP69K Stainless Display Quick Start Guide Introduction
- 9 -
1.3 Product Overview
This section contains mechanical drawing of the Display. Notice that this is a
simplified drawing and some components are not marked in detail.
1.3.1 Dimensions 10.4"
Unit: mm
Dimensions : 289 x 246 x 49.9
1.3.2 Dimensions 15"
Unit: mm
Dimensions : 378 x 301 x 56.4
IP69K Stainless Display Quick Start Guide Introduction
- 10 -
1.3.3 Dimensions 19”
Unit: mm
Dimensions : 467.4 x 392 x 56.6
1.3.4 Dimensions 21.5”
Unit: mm
Dimensions : 541 x 337 x 53
IP69K Stainless Display Quick Start Guide Introduction
- 11 -
1.4 Physical Buttons and LED Indicators
Physical buttons and LED indicators located on the rear side of the Display.
Physical Buttons
Icon
Button
Description
DOWN/
VOLUME
DOWN
Press to decrease the volume or
volume down when without OSD
menu.
UP/ VOLUME
UP
Press to increase the value or volume
up when without OSD menu.
ESC/ AUTO
Press to exit the menu or auto
adjustment when without OSD menu.
OK/ MENU
Press to confirm the action or to call
main OSD menu.
Power On/ Off
Press to power on or power off the
device.
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
On
System is in standby mode
Off
System is idle
IP69K Stainless Display Quick Start Guide Introduction
- 12 -
1.5 Connectors
IP69K Stainless P-Cap Display has M25 type connectors with protection cap
and air venting valve.
IP69K Stainless Display Quick Start Guide Getting Started
- 13 -
❷ GETTING STARTED
2.1 Turning On and Off the Device
Follow the following steps to turn on your device:
1. Connect the AC adapter to the DC-in jack connector located on the
back side of the Display.
2. Connect the power cord to AC adapter.
3. Plug the power cord to the AC outlet and the device will turn on
automatically.
AC Adapter specifications vary by panel size.
Size
10.4”
15”
19”
21.5”
AC Adapter
12V/ 50W
12V/ 80W
12V/ 80W
12V/ 80W
Power
Consumption*
26W (typ.)
30W (typ.)
36W (typ.)
50W (typ.)
*With maximum backlight and high CPU load.
To shut down your device, do the following disconnect the power cord and the
device will automatically turn off.
IP69K Stainless Display Quick Start Guide Installation
- 14 -
❸ INSTALLATION
3.1 Wiring Requirements
The following common safety precautions should be observed before installing
any electronic device:
Strive to use separate, non-intersecting paths to route power and
networking wires. If power wiring and device wiring paths must cross make
sure the wires are perpendicular at the intersection point.
Keep the wires separated according to interface. The rule of thumb is that
wiring that shares similar electrical characteristics may be bundled
together.
Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices
in the system.
CAUTION
Do not run signal or communication wiring and power wiring in the same
conduit. To avoid interference, wires with different signal characteristics
(i.e., different interfaces) should be routed separately.
Be sure to disconnect the power cord before installing and/or wiring your
device.
Verify the maximum possible current for each wire gauge, especially for
the power cords. Observe all electrical codes dictating the maximum
current allowable for each wire gauge.
If the current goes above the maximum ratings, the wiring could overheat,
causing serious damage to your equipment.
Be careful when handling the unit. When the unit is plugged in, the internal
components generate a lot of heat which may leave the outer casing too
hot to touch.
IP69K Stainless Display Quick Start Guide Installation
- 15 -
3.2 Connector Pin Assignments
This Display is equipped with four M25 type connectors which are waterproof.
Use only the cables that are included in the package. The pin assignments of the
cables are as follows.
3.2.1 Power Cable
The IP69K Stainless P-Cap Display has M25 type connectors. Use power cable
to connect Display to the source of power.
IP69K Stainless P-Cap Display support 12V DC power input.
IP69K Stainless Display Quick Start Guide Installation
- 16 -
3.2.2 USB Cable (For Touch)
The Flat Stainless P-Cap Display has M25 type USB connector for touch. Use
USB cable to connect touch.
3.2.3 VGA Cable
The Flat Stainless P-Cap Display has M25 type VGA connector. Use VGA cable
to connect the display to other external devices.
IP69K Stainless Display Quick Start Guide Installation
- 17 -
3.2.4 DVI Cable (Optional)
The Flat Stainless P-Cap Display has optional waterproof DVI connector. Use
DVI cable to connect the Display to other external device.
IP69K Stainless Display Quick Start Guide Installation
- 18 -
3.6 Mounting
The IP69K Flat Stainless P-Cap Display devices come with different mounting
options suitable for most of the industrial and commercial applications.
3.6.1 VESA Mounting
The Display has VESA mount holes on the rear side. Follow instructions below to
mount the unit with VESA Mount bracket (not supplied by Winmate).
Size
VESA Plate
Dimensions
Screw Hole
Diameter
10.4”, 15”, 19”
100 x 100 mm
VESA M4x5 mm
21.5”
100 x 200 mm
VESA M4x5 mm
Mounting Instruction:
1. Screw VESA bracket to the fixture (ex. swing arm) with four VESA screws.
2. Place the device on VESA bracket.
IP69K Stainless Display Quick Start Guide Installation
- 19 -
3.6.2 Yoke Mounting
Yoke Mount solution allows installing the Display with the bracket (not supplied
by Winmate).
Mounting instruction:
1. Place the Display on the bracket stand, aiming screw holes for each other.
2. Secure screws to fix the device upon the bracket stand.
3. Firmly secure the locking handle to the Display.
IP69K Stainless Display Quick Start Guide Specifications
- 20 -
❹ SPECIFICATIONS
Hardware Specifications
Model Name
R10L100-
SPT269
R15L100-
SPC369
R19L100-
SPM169
W22L100-
SPA369
Display
Size
10.4”
15”
19”
21.5”
Resolution
1024 x 768
1024 x 768
1280 x 1024
1920 x 1080
Brightness
350
(typ.)
250
(typ.)
250
(typ.)
250
(typ.)
Contrast
Ratio
1000 : 1 (typ.)
700 : 1(typ.)
1000 : 1 (typ.)
3000 : 1(typ.)
Viewing
Angle
-88~88(H);-
88~88(V)
-80~80(H);-
70~70(V)
-85~85(H);-
80~80(V)
-89~89(H);-
89~89(V)
Max Colors
16.2M
16.2M
16.7M
16.7M
Touch
P-Cap(Default), Glass (Optional)
Input/ Output Connectors
Power
1 x 12V DC (M25 connector)
USB
1 x USB For Touch (M25 connector)
VGA
1 x 10pin VGA (M25 connector)
DVI
1 x DVI-D (Optional) (Waterproof connector)
Mechanical Specification
Mounting
Yoke Mount, VESA Mount
Environmental Consideration
Operating
Temperature
0°C to +45°C
Operating
Humidity
30% to 90% (non-condensing)
IP Rating
Full IP69K
Power Specifications
Power Input
12V DC IN (Lockable Power Jack)
Power
Consumption
26W (typ.)
30W (typ.)
36W (typ.)
50W (typ.)
Standards and Certification
Certification
CE, FCC, RoHs
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Winmate R19L100-SPM169 Guide de démarrage rapide
- Taper
- Guide de démarrage rapide
- Ce manuel convient également à
dans d''autres langues
Documents connexes
-
Winmate W22L100-SPA3 Guide de démarrage rapide
-
Winmate W22IK3S-SPA3 Guide de démarrage rapide
-
Winmate W22IK3S-SPA3 Manuel utilisateur
-
Winmate R19IH3S-SPM169 Guide de démarrage rapide
-
Winmate W22IH3S-SPA3 Guide de démarrage rapide
-
Winmate R10IB3S-67T2 Quick Start Manuals
-
Winmate G-WIN Manuel utilisateur
-
Winmate W10L100-GSH2 Guide de démarrage rapide
-
Winmate R15ID3S-65A1FTE Guide de démarrage rapide
-
Winmate R15L600-65C3-1 Manuel utilisateur
