Winmate R19IH3S-SPM169 Guide de démarrage rapide

Please read this instructions before operating the device and retain them for future reference.

15~21.5” IP69K Stainless

P-Cap Panel PC

Intel® Core™ i5-5250U Broadwell 1.6GHz (turbo to 2.7GHz)

Model No. R15IH3S-SPC369

R19IH3S-SPM169

W22IH3S-SPA369

Quick Start Guide

For more information on this and

other Winmate products, please

visit our website at:

www.winmate.com

Version 1.0

Document Part Number: 915211101032

IP69K Stainless Panel PC Quick Start Guide Contents

- 2 -

Contents

❶ INTRODUCTION - 7 -

1.1 Features - 7 -

1.2 Package Content - 8 -

1.3 Product Overview - 9 -

1.3.1 Dimensions 15" - 9 -

1.3.2 Dimensions 19” - 9 -

1.3.3 Dimensions 21.5” - 10 -

1.4 Physical Buttons and LED Indicators - 11 -

1.5 Connectors - 12 -

❷ GETTING STARTED - 13 -

2.1 Turning On - 13 -

2.2 How to Enable Watchdog - 14 -

2.3 Turning off Your Device - 15 -

❸ INSTALLATION - 16 -

3.1 Wiring Requirements - 16 -

3.2 Connector Pin Assignments - 17 -

Power Cable - 17 -

3.3 Serial Cable - 18 -

3.4 Ethernet Cable - 19 -

3.5 USB 2.0 Cable - 20 -

3.6 Mounting - 21 -

3.6.1 VESA Mounting - 21 -

3.6.2 Yoke Mounting - 22 -

❹ SPECIFICATIONS - 23 -

APPENDIX - 25 -

Appendix A: Cleaning the Monitor - 25 -

Appendix B: Winmate Software Development Kit - 26 -

IP69K Stainless Panel PC Quick Start Guide Preface

- 3 -

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received

including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/

A2:2013

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

IP69K Stainless Panel PC Quick Start Guide Preface

- 4 -

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the

prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order

to improve design and/or performance. We assume no responsibility or liability for

the use of the described product(s) conveys no license or title under any patent,

copyright, or masks work rights to these products, and make no representations

or warranties that these products are free from patent, copyright, or mask work

right infringement, unless otherwise specified. Applications that are described in

this manual are for illustration purposes only. We make no representation or

guarantee that such application will be suitable for the specified use without

further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from

material and workmanship defects for a period of one year from the invoice date.

If the customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned

product must be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by over 30 days,

the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth

digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W17Axxxxxxxx means October of year 2017.

IP69K Stainless Panel PC Quick Start Guide Preface

- 5 -

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir

ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

IP69K Stainless Panel PC Quick Start Guide Preface

- 6 -

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful

information or to alert you to the potential for hardware damage or personal injury.

These are Notes, Important, Cautions, and Warnings. The following is an

example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how

to avoid the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur

des emplacements électriques et comment éviter ces problèmes.

IP69K Stainless Panel PC Quick Start Guide Introduction

- 7 -

❶ INTRODUCTION

Congratulations on purchasing Winmate® IP69K Stainless P-Cap Panel PC.

Winmate flat stainless steel P-Cap panel PCs and display are designed for

applications with high hygienic requirements. IP69K series is completely

waterproof with IP69K level of protection allowing for easy cleaning and

sterilization.

The IP69K stainless series work well in food, beverage industry, including food

processing operations and packaging, chemical manufacturing and other

industrial applications.

1.1 Features

The IP69K Stainless P-Cap Panel PC features:

 Intel® Core™ i5-5250U Broadwell 1.6 GHz (Turbo to 2.7 GHz)

 SUS304 stainless steel for food and chemical industries

 Full IP69K waterproof enclosure, good corrosion resistance

 A true flat, easy-to-clean front surface with edge-to-edge design

 Flat multi-touch panel pc with superior readability and P-CAP technology

 Various mounting solutions, Yoke mount and VESA mount

 Plenty of I/O s including USB 2.0, RS-232 serial port and RJ45-

10/100/1000 LAN ports

 Waterproof ports with adapter cables for external connectivity

 Supports VESA mount

 Supports Rain/ Glove mode (Optional)

IP69K Stainless Panel PC Quick Start Guide Introduction

- 8 -

1.2 Package Content

Carefully remove the box and unpack your device. Please check if all the items

listed below are inside your package. If any of these items are missing or

damaged contact us immediately.

Factory shipment list:

Panel PC

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

Varies by product

specifications

915211101032

IH32: 9171111I102F

AC Adapter

Power Cable*

Serial Cable

80W 90PO12080003

Varies by country

94G0103090Q0

Ethernet Cable

USB Cable

VESA Screws

94I0080080KF

9480108080Q0

913511101101

IP69K Stainless Panel PC Quick Start Guide Introduction

- 9 -

1.3 Product Overview

This section contains mechanical drawing of the Panel PC. Notice that this is a

simplified drawing and some components are not marked in detail.

1.3.1 Dimensions 15"

Unit: mm

Dimensions : 378 x 301 x 56.4

1.3.2 Dimensions 19”

Unit: mm

Dimensions : 467.4 x 392 x 56.6

IP69K Stainless Panel PC Quick Start Guide Introduction

- 10 -

1.3.3 Dimensions 21.5”

Unit: mm

Dimensions : 541 x 337 x 53

IP69K Stainless Panel PC Quick Start Guide Introduction

- 11 -

1.4 Physical Buttons and LED Indicators

Physical buttons and LED indicators located on the rear side of the Panel PC.

Physical Buttons

Icon

Button

Description

Reset

Press to reset the system

Power On/ Off

Press to power on or power off the device

LED Indicators

LED Type

Status

Description

On

Power is on

Off

Power is off

Blinking

Storage activity

(Data is being read or written)

Off

System is idle

IP69K Stainless Panel PC Quick Start Guide Introduction

- 12 -

1.5 Connectors

IP69K Stainless P-Cap Panel PC has M25 type connectors with protection cap

and air venting valve.

IP69K Stainless Panel PC Quick Start Guide Getting Started

- 13 -

❷ GETTING STARTED

2.1 Turning On

Follow the following steps to turn on your device:

1. Connect the AC adapter to the DC-in jack connector located on the

back side of the Panel PC.

2. Connect the power cord to AC adapter.

3. Plug the power cord to the AC outlet and the device will turn on

automatically.

AC Adapter specifications vary by panel size.

Size

15”

19”

21.5”

AC Adapter

12V/ 80W

Power

Consumption*

52W (typ.)

56W (typ.)

66W (typ.)

*With maximum backlight and high CPU load.

IP69K Stainless Panel PC Quick Start Guide Getting Started

- 14 -

2.2 How to Enable Watchdog

To enable Watchdog, you need to download Winmate Watchdog utility. Find

more information on Watchdog in “Watchdog Guide” that you can download from

Winmate Download Center. Refer to the User Manual for more details.

To enable watchdog in Watchdog AP follow the instructions below:

1. On the right bottom side of the desktop screen, click triangle button to

show hidden icons.

2. Click icon to open Watchdog utility.

3. In Watchdog utility window set countdown time and periodically feed time,

or disable watchdog.

Example:

Every 10 min watchdog will

monitor the system, in case any

error occurs the system will restart

automatically when the countdown

time reaches 0.

Every 9 min watchdog timer will

be reset to 10 min.

IP69K Stainless Panel PC Quick Start Guide Getting Started

- 15 -

Settings

Description

Watchdog Countdown Time

The system automaticity restarts when

this countdown time reaches zero.

Default: 10 min

Periodically Feed Time

To set a cycle time to automatically reset

watchdog timer.

Default: 9 min

Enable / Disable

Enable or disable watchdog.

Default: Enable

2.3 Turning off Your Device

To shut down your device, do the following:

Tap Start ( ) > Shut down.

Wait for your Panel PC to completely turn off before disconnecting the power

cord (if necessary).

IP69K Stainless Panel PC Quick Start Guide Installation

- 16 -

❸ INSTALLATION

3.1 Wiring Requirements

The following common safety precautions should be observed before installing

any electronic device:

 Strive to use separate, non-intersecting paths to route power and

networking wires. If power wiring and device wiring paths must cross make

sure the wires are perpendicular at the intersection point.

 Keep the wires separated according to interface. The rule of thumb is that

wiring that shares similar electrical characteristics may be bundled

together.

 Do not bundle input wiring with output wiring. Keep them separate.

 When necessary, it is strongly advised that you label wiring to all devices

in the system.

CAUTION

 Do not run signal or communication wiring and power wiring in the same

conduit. To avoid interference, wires with different signal characteristics

(i.e., different interfaces) should be routed separately.

 Be sure to disconnect the power cord before installing and/or wiring your

device.

 Verify the maximum possible current for each wire gauge, especially for

the power cords. Observe all electrical codes dictating the maximum

current allowable for each wire gauge.

 If the current goes above the maximum ratings, the wiring could overheat,

causing serious damage to your equipment.

 Be careful when handling the unit. When the unit is plugged in, the internal

components generate a lot of heat which may leave the outer casing too

hot to touch.

IP69K Stainless Panel PC Quick Start Guide Installation

- 17 -

3.2 Connector Pin Assignments

This Panel PC is equipped with four M25 type connectors which are waterproof.

Use only the cables that are included in the package. The pin assignments of the

cables are as follows.

Power Cable

The IP69K Stainless P-Cap Panel PC has M25 type connectors. Use power

cable to connect Panel PC to the source of power.

IP69K Stainless P-Cap Panel PC support 12V DC power input.

IP69K Stainless Panel PC Quick Start Guide Installation

- 18 -

3.3 Serial Cable

The IP69K Stainless P-Cap Panel PC has M25 type serial port connector. Use

serial cable to connect serial interfaces.

IP69K Stainless Panel PC Quick Start Guide Installation

- 19 -

3.4 Ethernet Cable

The IP69K Stainless P-Cap Panel PC has M25 type Ethernet connector. Use

Ethernet cable to connect the Panel PC to the Internet.

IP69K Stainless Panel PC Quick Start Guide Installation

- 20 -

3.5 USB 2.0 Cable

The IP69K Stainless P-Cap Panel PC has M25 type USB 2.0 connector. Use

USB 2.0 cable to connect external devices such as mouse or keyboard to the

Panel PC.

La page charge ...

Winmate R19IH3S-SPM169 Guide de démarrage rapide

Ce manuel convient également à

Winmate R19IH3S-SPM169 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents