AT&T ML17928 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur
User’s manual
ML17928
Two-line corded telephone
with caller ID/call waiting
© 2011-2019 Advanced American Telephones. All Rights Reserved. AT&T and
the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Printed in China.
Congratulations
on purchasing your new AT&T product. Before using this AT&T product,
please read Important safety information on page 49 of this users manual.
Please thoroughly read the users manual for all the feature operations and
troubleshooting information you need to install and operate your new AT&T
product. You can also visit our website at www.telephones.att.com or
call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Model number: ML17928
Type: Two-line corded telephone with caller ID/call waiting
Serial number: ________________________________________________________
Purchase date: ________________________________________________________
Place of purchase:
Both the model and serial numbers of your AT&T product can be found on the
bottom of the telephone base.

used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083
Compliant Logo is a trademark of the Telecommunications Industry Association.
Used under license.
Clearspeak
TM
is a trademark of Advanced American Telephones.
Parts checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Quick start guide
Telephone line cords: clear
(2-conductor) and black (4-conductor)
Telephone base
User’s manual
Handset with coiled
handset cord
Power adapter
Mounting bracket
Replacement
directory card
User’s manual
ML17928
Two-line corded telephone
with caller ID/call waiting
Quick start guide
ML17928
Two-line corded telephone
with caller ID/call waiting
User’s manual
ML17928
Two-line corded telephone
with caller ID/call waiting
Table of contents
Getting started
Quick reference guide .................................2
Telephone installation ................................4
Telephone base installation ..............4
Data port .............................................................. 7
Installation options .......................................8
Tabletop to wall installation ..............8
Wall to tabletop installation ............10
Optional headset ..........................................12
Directory card .................................................12
Menu setup
Telephone settings .....................................13
Menu overview .........................................13
Set date and time ..................................14
Set the primary line ..............................14
Choose the preferred mode ...........15
LCD backlight ............................................15
Ringer volume ..........................................16
Language .....................................................16
Set home and local area codes..... 17
Voicemail indicator settings .................18
Voicemail indicator ................................18
Clear voicemail indication ................18

 ...............................19
Telephone operation
Basic operation ............................................. 20
Making, answering or ending
a call ..............................................................20
On hook dialing (predialing) ............21
Clearspeak
TM
dial-in-base
speakerphone ..........................................21
Switching between the handset,
headset and speakerphone ............21
Redial ..............................................................22
Options while on calls ...............................23
Volume control ........................................23
Flash/call waiting ....................................23
Mute ................................................................23
Hold ..................................................................23
Switching between lines ................... 24
Conference calls ..................................... 24
Chain dialing...............................................25
Line power mode (no AC power) ...... 26
To make a call during a
power failure ............................................ 26
To answer a call during a
power failure ............................................ 26
Speed dial
Speed dial memory overview ..............27
Speed dial operation ................................. 28
Storing a number in a
speed dial location ............................... 28
Reviewing a speed dial number ......
28
Editing a speed dial number .......... 29
Turn auto ........... 29
Dialing a speed dial number ........... 30
Deleting a speed dial number ....... 30
Directory
About the directory .................................... 31
Directory memory capacity ............31
Character chart .......................................31
Create directory entries ..........................32
Creating a directory entry ................32
Reviewing directory entries ............33
Searching by name................................33
Review the directory ..................................33
Dial, delete or edit directory
entries ................................................................. 34
Display dial ................................................. 34
Deleting directory entries ...............34
Editing directory entries ...................34
Caller ID
About caller ID ................................................35
Information about caller ID
with call waiting ......................................35
How caller ID history (call log)
works ............................................................. 36
Caller ID operation .......................................37
Memory match .......................................37
Missed calls indicator ...........................37
Reviewing call history ..........................37
Dialing options ........................................ 38
Display dial ................................................. 38
Deleting call history entries ........... 38
Saving a call history entry
to the directory ...................................... 39
Saving a call history entry
to a speed dial location .....................40
Reasons for missing caller ID
information ................................................41
Appendix
Indicator lights and alert tones ......... 42
Indicator lights ........................................42
Alert tones .................................................42
Screen display messages ....................... 43
Troubleshooting...........................................44
General product care ................................48
Important safety information ............49
Safety information ...............................49
Especially about corded
telephones .................................................49
For C-UL compliance ................................. 50
Mesures de sécurité
importantes ............................................. 50
FCC and ACTA information ....................52
Part 15 of FCC rules ....................................54
Industry Canada ........................................... 54
Limited warranty ..........................................55
 ...........................57
Index
Index ..................................................................... 58
Getting started
Installation preparation
You must install the power
adapter before using the
telephone.
If you subscribe to high speed Internet service (DSL - digital subscriber line)

telephone line cord and telephone wall jack (pages 5 and 6
noise and caller ID problems caused by DSL interference. Please contact your

Your product may be shipped with a protective sticker covering the
telephone base display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
See pages 5-6 for easy
instructions.
1
2
Quick reference guide
CANCEL
Press to cancel an operation
and go back to the previous
menu (page 13).
Press and hold to return to
idle mode (page 13).
CID/
Press to display call history information when the
telephone is idle (page 37).
When entering numbers or names, press to move the
cursor to the .
MENU/ENTER
Press to enter the
main menu (page 13).
While in a menu, press
to choose an item,
or save an entry or
setting.
/DIRDIR
Press to enter
the directory
when the
telephone is idle
(page 33).
When entering
numbers or
names, press to
move the cursor
to the right.
CONF
Press to initiate a
three-way conference
call (page 24).
LINE 1, LINE 2
Press to make or
answer a call on
the selected line
(page 20).
HOLD
Press to place a call
on hold (page 23).
REDIAL
Press to dial the last number

hook (page 22).
When the telephone is idle,

numbers dialed. You can choose
to dial a displayed number
(pages 22).
FLASH
During a call, press to answer an
incoming call when you receive a
call waiting alert (page 23).
PAUSE
Press to insert a two-second dialing pause in
a number stored in the speed dial memory
or directory (pages 28 and 32).
REMOVE
Press to delete the displayed
directory, or call history entry (pages
34 and 38).
While entering numbers or names,
press to backspace and erase a digit
or character (pages 28 and 32).
/
While in a menu,
press to scroll up
or down.
Getting started
Getting started
3
Quick reference guide
VOL
-
While the telephone is not in
use, press to decrease the ringer
volume for both lines (page 16).
During a call, press to decrease
the listening volume (page 23).
When a line is ringing, press to
decrease the ringer volume of
that line temporarily (page 16).
HEADSET
Press to activate the headset
when a corded headset is
connected (page 20).
SPEAKER
Press to turn the
base speakerphone
(page 20).
LOWER
Press to enter the lower
locations of the speed dial
keys (page 27).
MUTE
During a call, press to mute the
microphone (page 23).
VOL
+
When the telephone is idle, press
to increase the ringer volume for
both lines (page 16).
During a call, press to increase the
listening volume (page 23).
When a line is ringing, press to
increase the ringer volume of that
line temporarily (page 16).
Speed dial keys
Press to dial or review a stored
speed dial number when the
telephone is idle (pages 28 and 30).
Getting started
4
Telephone installation
Telephone base installation
Install the mounting bracket for tabletop use.
Option 1: To install your telephone in a low tabletop position, insert the
 of the mounting bracket into the slots labeled
a
. Press the
 into the slots labeled
b
until they click into place.
1.
Option 1: Low tabletop position
Option 2: To install your telephone in a high tabletop position, insert the
 of the mounting bracket into the slots labeled
b
. Press the
 tabs into the slots labeled
a
until they click into place.
Option 2: High tabletop position
Mounting bracket
Mounting bracket
Getting started
5
Telephone installation
Connect the telephone line cord(s) and the power cord to the telephone base.
If you subscribe to high speed Internet service (DSL - digital subscriber line)


ID problems caused by DSL interference. Please contact your DSL service

Option 1: If you have a two-line wall jack, install your telephone base, as
shown below.
2.
Plug the other end of the
coiled handset cord into the

telephone base.
Plug the small end of
the power adapter
into the power jack
on the back of the
telephone base.
Plug one end of the
black telephone line
cord (4-conductor)
into the jack labeled
LINE 1/L1+L2 on
the back of the
telephone base.
Plug the other end of the black
telephone line cord (4-conductor)
into the wall jack.
Plug the large
end of the power
adapter into an
electrical outlet
not controlled by
a wall switch.
If you have DSL
high speed Internet

(not included) is
required.
NOTES:
Use only the power adapter supplied with this product. To order a replacement power
adapter, visit our website at www.telephones.att.com, or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
L1+L2
One end of
the coiled
telephone
line cord has
already been
plugged into
the handset.
Make sure it
is plugged in

Getting started
6
Telephone installation
Option 2: If you have two one-line wall jacks, install your telephone base, as
shown below.
Plug one end of the
clear telephone line
cord (2-conductor)
into the jack labeled
LINE 1/L1+L2 on
the back of the
telephone base.
Plug the other end of
the clear telephone line
cord (2-conductor) into
the wall jack.
Plug one end of the
black telephone line
cord (4-conductor)
into the jack labeled
LINE 2 on the back of
the telephone base.
Plug the other end of
the black telephone
line cord (4-conductor)
into the wall jack.
NOTES:
Use only the power adapter supplied with this product. To order a replacement power
adapter, visit our website at www.telephones.att.com, or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
Plug the large
end of the power
adapter into an
electrical outlet
not controlled by
a wall switch.
If you have DSL
high speed Internet
service, a 
(not included) is
required.
Plug the small
end of the power
adapter into the
power jack on
the back of the
telephone base.
L1 L2
Plug the other end
of the coiled handset
cord into the jack at

telephone base.
One end of the coiled
telephone line cord
has already been
plugged into the
handset. Make sure it

Getting started
7
Data port
If you want to connect another device (such as a modem or fax machine) to
the wall jack, use the jack labeled DATA on the back of the telephone base.
The data port uses line 2 only.
DATA port
Getting started
8
Installation options
If you want to mount your telephone on a wall, connect the telephone base
to a standard dual-stud telephone wall-mounting plate. If you do not have
this mounting plate, you can purchase one from many hardware or consumer
electronics retailers. Professional assistance may be required to install the
mounting plate.
Tabletop to wall installation
To install your telephone base in the wall installation position, make sure you

line cord from the wall outlet.
Hold down the switch hook on the telephone base, then slide the handset
tab upwards to remove it from the slot. Rotate the handset tab 180 degrees.
Push the handset tab down into the slot until it locks into position.
1.
Depending on whether the mounting bracket is in low or high tabletop
position, press
the mounting bracket from the telephone base.
2.
Option 1: Low tabletop position
Option 2: High tabletop position
Switch hook
Handset tab
Flexible tab
Flexible tab
Getting started
9
Plug the coiled handset cord into the handset and the telephone base. Plug
the small end of the power adapter cord into the power jack on the back of
the telephone base.
Plug the telephone line cords into the wall jacks.
Option 1: If you have a single two-line wall jack, use only the black
telephone line cord (4-conductor).
Plug one end of the black telephone line cord into the jack labeled
LINE 1/L1+L2 on the back of the telephone base. Plug the large end of the
power adapter into an electrical outlet not controlled by a wall switch.
3.
4.
Option 2: If you have two separate one-line wall jacks, use both telephone
line cords.
Plug one end of the clear telephone line cord into the jack labeled
LINE 1/L1+L2 on the back of the telephone base. Plug one end of the black
telephone line cord into the jack labeled LINE 2. Plug the other end of the
clear telephone line cord and the other end of the black telephone line
cord into the wall jacks.
Installation options
L1 L2
L1+L2
If you have DSL
high speed Internet

(not included) is
required.
If you have DSL high speed

(not included) is required.
Getting started
10
Wall to tabletop installation
To return the telephone base from wall installation to tabletop position:
Unwrap the telephone line cord. Remove the telephone base from the wall.
Unplug the telephone line cord from the telephone wall jack and the power
adapter cord from the electrical outlet.
1.
Wrap the telephone line cord, as shown below. Mount the telephone on the
mounting plate until it is held securely into position. Plug the large end of
the power adapter into an electrical outlet not controlled by a wall switch.
5.
Installation options
Getting started
11
Installation options
Hold down the switch hook on the telephone base, then slide the handset
tab upwards to remove it from the slot. Rotate the handset tab 180 degrees.
Push the handset tab down into the slot until it locks into position.
2.
Follow the steps in Telephone base installation on pages 4-6 to install
your telephone for tabletop use.
3.
Switch hook
Handset tab
Getting started
12
Optional headset
Plug a 2.5mm headset
into the jack on the right
side of the telephone
base (beneath the small

Directory card
Use the directory card to record the names of the speed dial numbers you stored.
To write names on the directory card:
Remove the clear plastic cover by inserting the tip of a small item, such as
a paper clip, into the hole at the top edge of the cover.
Pull out the directory card.
Write the information on the directory
card.
Replace the directory card and the
plastic cover.
To change the directory card:
Follow Steps 1 and 2, mentioned above, to
remove the old directory card.
Insert the new directory card and replace
the plastic cover.
1.
2.
3.
4.
1.
2.
You can use this telephone hands free when you install any industry standard
2.5mm corded telephone headset (purchased separately). The telephone
plays an error tone if you press HEADSET when a headset is not plugged into
the headset jack.
For best results, use an AT&T 2.5mm headset. To order an AT&T 2.5mm
headset, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
13
Telephone settings
DIRECTORY
CALL HISTORY
SPEED DIAL
PHONE SETTINGS
SET AREA CODE
VOICE MAIL
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
LCD BACKLIGHT
RINGER VOLUME
LANGUAGE
L1 COVM ON/OFF
L2 COVM ON/OFF
CLEAR VOICEMAIL
Menu structure
HOME AREA CODE
LOC AREA CODE1
LOC AREA CODE2
LOC AREA CODE3
LOC AREA CODE4
Menu overview
Use the menus to change the telephone settings.
When the telephone is idle, press MENU//ENTER to enter the main menu.
Press or to scroll to the feature to be changed. Press MENU/ENTER.
Press or to scroll to the desired settings.
Press MENU/ENTER to save your selection. The telephone plays a

making changes, press CANCEL.
-OR-
Press and hold CANCEL to return to idle mode.
NOTE: If no key is pressed within 30 seconds, the telephone automatically returns to idle
mode.
1.
2.
3.
4.
Menu setup
14
Menu setup
Telephone settings
Set date and time
If you subscribe to a caller ID service provided by your telephone service
provider, the date, month and time are set automatically with each
incoming call.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to PHONE SETTINGS.
Press MENU/ENTER.
Press MENU/ENTER to select SET DATE/TIME.
Use the dialing keys to enter the correct date and
time. To enter a number that is less than 10, enter a
0 before the digit. Press CID/ or /DIR to move the

-OR-
Press or to scroll to the desired digit. Press
CID/ or /DIR to
Press or to scroll to AM or PM.
Press MENU/ENTER 
returns to the previous menu.
NOTE: The telephone plays an error tone if you enter an invalid date or time.
Set the primary line
Use this feature to select the default telephone line to be used when you
make calls. The primary line is set to LINE1 by default.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to PHONE SETTINGS.
Press MENU/ENTER.
Press or to scroll to PRIMARY LINE.
Press MENU/ENTER.
Press or to scroll to LINE1 or LINE2.
Press MENU/ENTER to save. The telephone plays a
nu.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
SET DATE/TIME
01/01 12:01 AM
MM/DD HH/MM
SET DATE/TIME
__/__ __:__ AM
MM/DD HH/MM
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
SET DATE/TIME
01/01 12:01 AM
MM/DD HH/MM
SET DATE/TIME
__/__ __:__ AM
MM/DD HH/MM
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PRIMARY LINE
LINE1
LINE2
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PRIMARY LINE
LINE1
LINE2
15
Menu setup
Telephone settings
Choose the preferred mode
You can set the preferred mode to speakerphone or headset. Your selection
is used automatically when dialing a number from the directory, redial or
is also used for speed
dialing when auto speaker is set to On (see Turn auto speaker on or o
on page 29). If a corded headset is not plugged in, the speakerphone is used
automatically. The preferred mode is set to SPEAKERPHONE by default.
To change the setting:
When the telephone is idle, press MENU/ENTER.
Press or to scroll to PHONE SETTINGS.
Press MENU/ENTER.
Press or to scroll to PREFERRED MODE.
Press MENU/ENTER.
Press or to scroll to SPEAKERPHONE or
HEADSET.
Press MENU/ENTER to save. The telephone plays a
enu.
LCD backlight

When the telephone is idle, press MENU/ENTER.
Press or to scroll to PHONE SETTINGS.
Press MENU/ENTER.
Press or to scroll to LCD BACKLIGHT.
Press MENU/ENTER.
Press or to scroll to ON or OFF.
Press MENU/ENTER to save. The telephone plays

menu.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PREFERRED MODE
SPEAKERPHONE
HEADSET
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PREFERRED MODE
SPEAKERPHONE
HEADSET
PHONE SETTINGS
PRIMARY LINE
PREFERRED MODE
LCD BACKLIGHT
LCD BACKLIGHT
ON
OFF
PHONE SETTINGS
PRIMARY LINE
PREFERRED MODE
LCD BACKLIGHT
LCD BACKLIGHT
ON
OFF
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65

AT&T ML17928 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur

dans d''autres langues