AT&T ML17928 Manuel utilisateur

User’s manual

ML17928

Two-line corded telephone

with caller ID/call waiting

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Congratulations

on purchasing your new AT&T product. Before using this AT&T product,

please read Important safety information on page 49 of this user’s manual.

Please thoroughly read the user’s manual for all the feature operations and

troubleshooting information you need to install and operate your new AT&T

product. You can also visit our website at www.telephones.att.com or

call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Model number: ML17928

Type: Two-line corded telephone with caller ID/call waiting

Serial number: ________________________________________________________

Purchase date: ________________________________________________________

Place of purchase:

Both the model and serial numbers of your AT&T product can be found on the

bottom of the telephone base.



used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083

Compliant Logo is a trademark of the Telecommunications Industry Association.

Used under license.

Clearspeak

TM

is a trademark of Advanced American Telephones.

Parts checklist

Your telephone package contains the following items. Save your sales receipt

and original packaging in the event warranty service is necessary.

Quick start guide

Telephone line cords: clear

(2-conductor) and black (4-conductor)

Telephone base

User’s manual

Handset with coiled

handset cord

Power adapter

Mounting bracket

Replacement

directory card

User’s manual

ML17928

Two-line corded telephone

with caller ID/call waiting

Quick start guide

ML17928

Two-line corded telephone

with caller ID/call waiting

User’s manual

ML17928

Two-line corded telephone

with caller ID/call waiting

Table of contents

Getting started

Quick reference guide .................................2

Telephone installation ................................4

Telephone base installation ..............4

Data port .............................................................. 7

Installation options .......................................8

Tabletop to wall installation ..............8

Wall to tabletop installation ............10

Optional headset ..........................................12

Directory card .................................................12

Menu setup

Telephone settings .....................................13

Menu overview .........................................13

Set date and time ..................................14

Set the primary line ..............................14

Choose the preferred mode ...........15

LCD backlight ............................................15

Ringer volume ..........................................16

Language .....................................................16

Set home and local area codes..... 17

Voicemail indicator settings .................18

Voicemail indicator ................................18

Clear voicemail indication ................18



 ...............................19

Telephone operation

Basic operation ............................................. 20

Making, answering or ending

a call ..............................................................20

On hook dialing (predialing) ............21

Clearspeak

TM

dial-in-base

speakerphone ..........................................21

Switching between the handset,

headset and speakerphone ............21

Redial ..............................................................22

Options while on calls ...............................23

Volume control ........................................23

Flash/call waiting ....................................23

Mute ................................................................23

Hold ..................................................................23

Switching between lines ................... 24

Conference calls ..................................... 24

Chain dialing...............................................25

Line power mode (no AC power) ...... 26

To make a call during a

power failure ............................................ 26

To answer a call during a

power failure ............................................ 26

Speed dial

Speed dial memory overview ..............27

Speed dial operation ................................. 28

Storing a number in a

speed dial location ............................... 28

Reviewing a speed dial number ......

28

Editing a speed dial number .......... 29

Turn auto ........... 29

Dialing a speed dial number ........... 30

Deleting a speed dial number ....... 30

Directory

About the directory .................................... 31

Directory memory capacity ............31

Character chart .......................................31

Create directory entries ..........................32

Creating a directory entry ................32

Reviewing directory entries ............33

Searching by name................................33

Review the directory ..................................33

Dial, delete or edit directory

entries ................................................................. 34

Display dial ................................................. 34

Deleting directory entries ...............34

Editing directory entries ...................34

Caller ID

About caller ID ................................................35

Information about caller ID

with call waiting ......................................35

How caller ID history (call log)

works ............................................................. 36

Caller ID operation .......................................37

Memory match .......................................37

Missed calls indicator ...........................37

Reviewing call history ..........................37

Dialing options ........................................ 38

Display dial ................................................. 38

Deleting call history entries ........... 38

Saving a call history entry

to the directory ...................................... 39

Saving a call history entry

to a speed dial location .....................40

Reasons for missing caller ID

information ................................................41

Appendix

Indicator lights and alert tones ......... 42

Indicator lights ........................................42

Alert tones .................................................42

Screen display messages ....................... 43

Troubleshooting...........................................44

General product care ................................48

Important safety information ............49

Safety information ...............................49

Especially about corded

telephones .................................................49

For C-UL compliance ................................. 50

Mesures de sécurité

importantes ............................................. 50

FCC and ACTA information ....................52

Part 15 of FCC rules ....................................54

Industry Canada ........................................... 54

Limited warranty ..........................................55

 ...........................57

Index

Index ..................................................................... 58

Getting started

Installation preparation

You must install the power

adapter before using the

telephone.

If you subscribe to high speed Internet service (DSL - digital subscriber line)

 

telephone line cord and telephone wall jack (pages 5 and 6

noise and caller ID problems caused by DSL interference. Please contact your

  

Your product may be shipped with a protective sticker covering the

telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

See pages 5-6 for easy

instructions.

1

2

Quick reference guide

CANCEL

Press to cancel an operation

and go back to the previous

menu (page 13).

Press and hold to return to

idle mode (page 13).

CID/

Press to display call history information when the

telephone is idle (page 37).

When entering numbers or names, press to move the

cursor to the .

MENU/ENTER

Press to enter the

main menu (page 13).

While in a menu, press

to choose an item,

or save an entry or

setting.

/DIRDIR

Press to enter

the directory

when the

telephone is idle

(page 33).

When entering

numbers or

names, press to

move the cursor

to the right.

CONF

Press to initiate a

three-way conference

call (page 24).

LINE 1, LINE 2

Press to make or

answer a call on

the selected line

(page 20).

HOLD

Press to place a call

on hold (page 23).

REDIAL

Press to dial the last number



hook (page 22).

When the telephone is idle,



numbers dialed. You can choose

to dial a displayed number

(pages 22).

FLASH

During a call, press to answer an

incoming call when you receive a

call waiting alert (page 23).

PAUSE

Press to insert a two-second dialing pause in

a number stored in the speed dial memory

or directory (pages 28 and 32).

REMOVE

Press to delete the displayed

directory, or call history entry (pages

34 and 38).

While entering numbers or names,

press to backspace and erase a digit

or character (pages 28 and 32).

/

While in a menu,

press to scroll up

or down.

Getting started

3

Quick reference guide

VOL

-

While the telephone is not in

use, press to decrease the ringer

volume for both lines (page 16).

During a call, press to decrease

the listening volume (page 23).

When a line is ringing, press to

decrease the ringer volume of

that line temporarily (page 16).

HEADSET

Press to activate the headset

when a corded headset is

connected (page 20).

SPEAKER

Press to turn the

base speakerphone

(page 20).

LOWER

Press to enter the lower

locations of the speed dial

keys (page 27).

MUTE

During a call, press to mute the

microphone (page 23).

VOL

+

When the telephone is idle, press

to increase the ringer volume for

both lines (page 16).

During a call, press to increase the

listening volume (page 23).

When a line is ringing, press to

increase the ringer volume of that

line temporarily (page 16).

Speed dial keys

Press to dial or review a stored

speed dial number when the

telephone is idle (pages 28 and 30).

Getting started

4

Telephone installation

Telephone base installation

Install the mounting bracket for tabletop use.

Option 1: To install your telephone in a low tabletop position, insert the

 of the mounting bracket into the slots labeled

a

. Press the

 into the slots labeled

b

until they click into place.

1.

Option 1: Low tabletop position

Option 2: To install your telephone in a high tabletop position, insert the

 of the mounting bracket into the slots labeled

b

. Press the

 tabs into the slots labeled

a

until they click into place.

Option 2: High tabletop position

Mounting bracket

Getting started

5

Telephone installation

Connect the telephone line cord(s) and the power cord to the telephone base.

If you subscribe to high speed Internet service (DSL - digital subscriber line)

 



ID problems caused by DSL interference. Please contact your DSL service

 

Option 1: If you have a two-line wall jack, install your telephone base, as

shown below.

2.

Plug the other end of the

coiled handset cord into the



telephone base.

Plug the small end of

the power adapter

into the power jack

on the back of the

telephone base.

Plug one end of the

black telephone line

cord (4-conductor)

into the jack labeled

LINE 1/L1+L2 on

the back of the

telephone base.

Plug the other end of the black

telephone line cord (4-conductor)

into the wall jack.

Plug the large

end of the power

adapter into an

electrical outlet

not controlled by

a wall switch.

If you have DSL

high speed Internet

 

(not included) is

required.

NOTES:

Use only the power adapter supplied with this product. To order a replacement power

adapter, visit our website at www.telephones.att.com, or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.



The prongs are not designed to hold the plug in place if it is plugged into a ceiling,

under-the-table or cabinet outlet.

•

L1+L2

One end of

the coiled

telephone

line cord has

already been

plugged into

the handset.

Make sure it

is plugged in



Getting started

6

Telephone installation

Option 2: If you have two one-line wall jacks, install your telephone base, as

shown below.

Plug one end of the

clear telephone line

cord (2-conductor)

into the jack labeled

LINE 1/L1+L2 on

the back of the

telephone base.

Plug the other end of

the clear telephone line

cord (2-conductor) into

the wall jack.

Plug one end of the

black telephone line

cord (4-conductor)

into the jack labeled

LINE 2 on the back of

the telephone base.

Plug the other end of

the black telephone

line cord (4-conductor)

into the wall jack.

NOTES:

Use only the power adapter supplied with this product. To order a replacement power

adapter, visit our website at www.telephones.att.com, or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.



The prongs are not designed to hold the plug in place if it is plugged into a ceiling,

under-the-table or cabinet outlet.

•

Plug the large

end of the power

adapter into an

electrical outlet

not controlled by

a wall switch.

If you have DSL

high speed Internet

service, a  

(not included) is

required.

Plug the small

end of the power

adapter into the

power jack on

the back of the

telephone base.

L1 L2

Plug the other end

of the coiled handset

cord into the jack at



telephone base.

One end of the coiled

telephone line cord

has already been

plugged into the

handset. Make sure it



Getting started

7

Data port

If you want to connect another device (such as a modem or fax machine) to

the wall jack, use the jack labeled DATA on the back of the telephone base.

The data port uses line 2 only.

DATA port

Getting started

8

Installation options

If you want to mount your telephone on a wall, connect the telephone base

to a standard dual-stud telephone wall-mounting plate. If you do not have

this mounting plate, you can purchase one from many hardware or consumer

electronics retailers. Professional assistance may be required to install the

mounting plate.

Tabletop to wall installation

To install your telephone base in the wall installation position, make sure you



line cord from the wall outlet.

Hold down the switch hook on the telephone base, then slide the handset

tab upwards to remove it from the slot. Rotate the handset tab 180 degrees.

Push the handset tab down into the slot until it locks into position.

1.

Depending on whether the mounting bracket is in low or high tabletop

position, press

the mounting bracket from the telephone base.

2.

Option 1: Low tabletop position

Option 2: High tabletop position

Switch hook

Handset tab

Flexible tab

Getting started

9

Plug the coiled handset cord into the handset and the telephone base. Plug

the small end of the power adapter cord into the power jack on the back of

the telephone base.

Plug the telephone line cords into the wall jacks.

Option 1: If you have a single two-line wall jack, use only the black

telephone line cord (4-conductor).

Plug one end of the black telephone line cord into the jack labeled

LINE 1/L1+L2 on the back of the telephone base. Plug the large end of the

power adapter into an electrical outlet not controlled by a wall switch.

3.

4.

Option 2: If you have two separate one-line wall jacks, use both telephone

line cords.

Plug one end of the clear telephone line cord into the jack labeled

LINE 1/L1+L2 on the back of the telephone base. Plug one end of the black

telephone line cord into the jack labeled LINE 2. Plug the other end of the

clear telephone line cord and the other end of the black telephone line

cord into the wall jacks.

Installation options

L1 L2

L1+L2

If you have DSL

high speed Internet

 

(not included) is

required.

If you have DSL high speed

 

(not included) is required.

Getting started

10

Wall to tabletop installation

To return the telephone base from wall installation to tabletop position:

Unwrap the telephone line cord. Remove the telephone base from the wall.

Unplug the telephone line cord from the telephone wall jack and the power

adapter cord from the electrical outlet.

1.

Wrap the telephone line cord, as shown below. Mount the telephone on the

mounting plate until it is held securely into position. Plug the large end of

the power adapter into an electrical outlet not controlled by a wall switch.

5.

Installation options

Getting started

11

Installation options

Hold down the switch hook on the telephone base, then slide the handset

tab upwards to remove it from the slot. Rotate the handset tab 180 degrees.

Push the handset tab down into the slot until it locks into position.

2.

Follow the steps in Telephone base installation on pages 4-6 to install

your telephone for tabletop use.

3.

Switch hook

Handset tab

Getting started

12

Optional headset

Plug a 2.5mm headset

into the jack on the right

side of the telephone

base (beneath the small



Directory card

Use the directory card to record the names of the speed dial numbers you stored.

To write names on the directory card:

Remove the clear plastic cover by inserting the tip of a small item, such as

a paper clip, into the hole at the top edge of the cover.

Pull out the directory card.

Write the information on the directory

card.

Replace the directory card and the

plastic cover.

To change the directory card:

Follow Steps 1 and 2, mentioned above, to

remove the old directory card.

Insert the new directory card and replace

the plastic cover.

1.

2.

3.

4.

1.

2.

You can use this telephone hands free when you install any industry standard

2.5mm corded telephone headset (purchased separately). The telephone

plays an error tone if you press HEADSET when a headset is not plugged into

the headset jack.

For best results, use an AT&T 2.5mm headset. To order an AT&T 2.5mm

headset, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

13

Telephone settings

DIRECTORY

CALL HISTORY

SPEED DIAL

PHONE SETTINGS

SET AREA CODE

VOICE MAIL

SET DATE/TIME

PRIMARY LINE

PREFERRED MODE

LCD BACKLIGHT

RINGER VOLUME

LANGUAGE

L1 COVM ON/OFF

L2 COVM ON/OFF

CLEAR VOICEMAIL

Menu structure

HOME AREA CODE

LOC AREA CODE1

LOC AREA CODE2

LOC AREA CODE3

LOC AREA CODE4

Menu overview

Use the menus to change the telephone settings.

When the telephone is idle, press MENU//ENTER to enter the main menu.

Press or to scroll to the feature to be changed. Press MENU/ENTER.

Press or to scroll to the desired settings.

Press MENU/ENTER to save your selection. The telephone plays a



making changes, press CANCEL.

-OR-

Press and hold CANCEL to return to idle mode.

NOTE: If no key is pressed within 30 seconds, the telephone automatically returns to idle

mode.

1.

2.

3.

4.

Menu setup

14

Menu setup

Telephone settings

Set date and time

If you subscribe to a caller ID service provided by your telephone service

provider, the date, month and time are set automatically with each

incoming call.

When the telephone is idle, press MENU/ENTER.

Press or to scroll to PHONE SETTINGS.

Press MENU/ENTER.

Press MENU/ENTER to select SET DATE/TIME.

Use the dialing keys to enter the correct date and

time. To enter a number that is less than 10, enter a

0 before the digit. Press CID/ or /DIR to move the



-OR-

Press or to scroll to the desired digit. Press

CID/ or /DIR to

Press or to scroll to AM or PM.

Press MENU/ENTER 

returns to the previous menu.

NOTE: The telephone plays an error tone if you enter an invalid date or time.

Set the primary line

Use this feature to select the default telephone line to be used when you

make calls. The primary line is set to LINE1 by default.

When the telephone is idle, press MENU/ENTER.

Press or to scroll to PHONE SETTINGS.

Press MENU/ENTER.

Press or to scroll to PRIMARY LINE.

Press MENU/ENTER.

Press or to scroll to LINE1 or LINE2.

Press MENU/ENTER to save. The telephone plays a

nu.

1.

2.

3.

4.

5.

6.

1.

2.

3.

4.

5.

SET DATE/TIME

01/01 12:01 AM

MM/DD HH/MM

SET DATE/TIME

__/__ __:__ AM

MM/DD HH/MM

PHONE SETTINGS

SET DATE/TIME

PRIMARY LINE

PREFERRED MODE

SET DATE/TIME

01/01 12:01 AM

MM/DD HH/MM

SET DATE/TIME

__/__ __:__ AM

MM/DD HH/MM

PHONE SETTINGS

SET DATE/TIME

PRIMARY LINE

PREFERRED MODE

PHONE SETTINGS

SET DATE/TIME

PRIMARY LINE

PREFERRED MODE

PRIMARY LINE

LINE1

LINE2

PHONE SETTINGS

SET DATE/TIME

PRIMARY LINE

PREFERRED MODE

PRIMARY LINE

LINE1

LINE2

15

Menu setup

Telephone settings

Choose the preferred mode

You can set the preferred mode to speakerphone or headset. Your selection

is used automatically when dialing a number from the directory, redial or

is also used for speed

dialing when auto speaker is set to On (see Turn auto speaker on or o

on page 29). If a corded headset is not plugged in, the speakerphone is used

automatically. The preferred mode is set to SPEAKERPHONE by default.

To change the setting:

When the telephone is idle, press MENU/ENTER.

Press or to scroll to PHONE SETTINGS.

Press MENU/ENTER.

Press or to scroll to PREFERRED MODE.

Press MENU/ENTER.

Press or to scroll to SPEAKERPHONE or

HEADSET.

Press MENU/ENTER to save. The telephone plays a

enu.

LCD backlight

 

When the telephone is idle, press MENU/ENTER.

Press or to scroll to PHONE SETTINGS.

Press MENU/ENTER.

Press or to scroll to LCD BACKLIGHT.

Press MENU/ENTER.

Press or to scroll to ON or OFF.

Press MENU/ENTER to save. The telephone plays



menu.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

PHONE SETTINGS

SET DATE/TIME

PRIMARY LINE

PREFERRED MODE

SPEAKERPHONE

HEADSET

PHONE SETTINGS

SET DATE/TIME

PRIMARY LINE

PREFERRED MODE

SPEAKERPHONE

HEADSET

PHONE SETTINGS

PRIMARY LINE

PREFERRED MODE

LCD BACKLIGHT

ON

OFF

PHONE SETTINGS

PRIMARY LINE

PREFERRED MODE

LCD BACKLIGHT

ON

OFF

La page charge ...

AT&T ML17928 Manuel utilisateur

AT&T ML17928 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents