brondell PureSpa Easy Bidet Toilet Attachment Le manuel du propriétaire

Taper
Le manuel du propriétaire
OWNER MANUAL
PS-65, CANPS-65 Bidet Attachment
Product Features ....................Page 2
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Product Specs .......................Page 4
Installation ..........................Page 4
Operation ...........................Page 9
Maintenance ........................Page 10
Warranty ............................Page 11
Contact .............................Page 12
Spanish Version .....................Page 13
French Version ......................Page 26
CONTENTS
PRODUCT FEATURES
High-quality ABS material with full body panel
Hygienic retractable nozzle
Self-cleaning nozzle feature
Ambient temperature bidet wash
Positionable nozzle
Adjustable water pressure
Ceramic core internal valve with patented uni-body
construction for safety
High-quality metal 7/8” T-valve
Durable braided metal cold water hose
No electricity or batteries required
Easy installation and adjustable toilet fit
All accessories included for standard installation
One-year warranty
2
Bidet attachment with turn-dial control and adjustable brackets
T-Valve connector
⁄" x ⁄" x ⁄"
Owner manual
Large rubber washer (2)
PARTS LIST
3
WHAT'S IN THE BOX?
25” braided metal
bidet hose
4
PRODUCT SPECS
INSTALLATION
IMPORTANT
Please be advised that the provided
T-Valve should be installed at the Fill
Valve under the toilet tank, and NOT
at the cold water supply coming from
the wall.
If you do not have access to the Fill
Valve under the toilet tank, contact
Brondell Customer Service at
888.542.3355. We may be able to
guide you through the process.
4.1"7.9"
3.14"
1.3" at deepest point
on control panel
0.4" deep
13.4"
6.3"
5.5"
1. Remove existing toilet seat
a. Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting
bolts. Alternatively, you may need to loosen
mounting bolts underneath the seat.
b. Remove the toilet seat and set the seat,
mounting bolts and hardware aside.
INSTALLATION cont.
Check Water Supply Line
Check the water supply line that connects the toilet tank fill valve to the water
shuto valve at the wall. If it is a rigid pipe, you will need to purchase a flexible
water supply hose to replace it before installing the PureSpa. The length of the
hose may vary, and the top connection size should be 7/8” Ballcock to connect to
the T-valve that you will install under the toilet tank, and the bottom connection will
vary (most common are 3/8” and 1/2” female compression).
BEFORE INSTALLATION
INSTALLING THE BIDET ATTACHMENT
Step 1b
5
Step 2c
2. Turn o water supply valve and flush toilet
a. Turn o water supply at the wall to stop flow
of water.
b. Flush toilet and hold down handle to
completely empty toilet tank.
c. Disconnect water supply hose from the fill
valve under the toilet tank.
6
3. Connect 7/8” T-Valve to Water Supply Line and
Fill Valve Under Toilet Tank.
a. Install the 7/8” T-valve with one or both of
the rubber washers to the incoming water
connection on the bottom of your toilet tank.
b. Connect the cold water supply line coming
from the wall to the bottom of the T-valve.
4. Connect Bidet Hose to T-Valve
a. Connect one end of the braided metal bidet
hose to the remaining open side of the
installed T-valve.
Step 3a
Step 3b
Step 4a
b. Make sure the adjustable brackets line
up with the holes in the toilet fixture. You
may need to move the adjustable brackets
accordingly to line up properly.
c. Replace the toilet seat on top of bidet
attachment and secure using original toilet
seat hardware. Make sure to tighten so that
the bidet attachment and seat do not move.
5. Install Bidet Attachment on Toilet
a. Place bidet attachment on the toilet so the
nozzle is as close to the back of the toilet
bowl as it will go. This will vary by toilet.
INSTALLATION cont.)
Step 5a
Step 5b
Step 5c
7
8
7. Turn on Water Supply and check for leaks
a. Open the main water supply valve slowly and check for leaks.
b. Wait 5-10 minutes, check again and if there are no leaks continue.
Note: if there is any leaking, check all rubber washers and make sure all water
connections are tight and secure. If necessary, you can use plumbers tape for
any leaking connections.
6. Connect Bidet Hose to Bidet Attachment
a. Connect open end of bidet hose to the
connection on the back side of the bidet
attachment.
Step 6a
To clean the bidet nozzle, turn the control dial towards the “Nozzle Cleaning”
position and water should wash over the nozzle.
For the general bidet wash function, turn the dial towards the “Wash” position.
The further the dial is turned, the higher the water pressure will be.
To lower the water pressure, turn the nozzle back towards the center.
The nozzle can be easily adjusted by gently
pulling the end of the nozzle forward or
backwards. Once desired position is set, the
nozzle will remain in that position until manually
moved.
OPERATION
USING THE PURESPA
NOZZLE POSITIONING
9
10
To clean the nozzle, gently pull down on the head of the nozzle, and use a
toothbrush or soft cloth and mild detergent (such as dish soap). You may also
unscrew the nozzle tip cap for a more thorough cleaning or use a toothpick if any
nozzle holes are plugged with hard water buildup. When cleaning, be careful not
to drop or flush the nozzle cap.
To clean the bidet, use a mild cleaner such as Simple Green or Windex spray to
clean the PureSpa. Do not scrub or use harsh, abrasive products to clean the
PureSpa, which may scratch the product.
MAINTENANCE
SHORT TERM NON-USE
If the product will not be used for more than a few weeks, you may consider
shutting the water supply o at the wall for extra precaution.
11
WARRANTY
Brondell products are backed by some of the most comprehensive warranties in the industry. Brondell
warrants that all products (excluding consumable items) shall be free from defects in material and
workmanship under normal use and service.
PureSpa PS-65 Residential One-Year Limited Warranty
100% Coverage of all parts and labor for the entire product for the first year from original date of purchase.
PureSpa PS-65 Commercial Warranty
Warranty period 1 year from original purchase date for all Brondell products. Warranties may not apply to
products that are used for heavy commercial, hospital, or other high use non-residential applications.
Exclusions and Limitations
1. BRONDELL warrants its products to be free from manufacturing defects under normal use and service.
This warranty is extended only to the ORIGINAL PURCHASER.
2. BRONDELL’s obligations under this warranty are limited to repairs or replacement, at BRONDELL’s
option, of products or parts found to be defective, provided that such products were properly installed
and used in accordance with instructions. BRONDELL reserves the right to make such inspections as may
be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor or parts
in connection with warranty repairs for the first three years from date of purchase on all products except
those that may be subject to commercial use limitations.
3. BRONDELL is not responsible for the cost of removal, return (shipping) and/or re-installation of products.
This warranty does NOT apply to:
Damage or loss which occurs during shipment.
Damage or loss sustained through any natural or man-made causes beyond the control of
BRONDELL, including but not limited to fire, earthquake, floods, etc.
Damage or loss resulting from sediments or foreign matter contained in a water system.
Damage or loss resulting from negligent or improper installation including installation of a unit in a
harsh or hazardous environment.
Damage or loss resulting from removal, improper repair, modification of the product, or improper
maintenance including damage caused by chlorine or chlorine related products
Damage or loss resulting from electrical surges, electrical outages, lightning strikes, or other acts
which are not the fault of Brondell or which the Product is not specified to tolerate.
4. This warranty gives you specific legal rights. You may have other rights which vary from state to state.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR OR REPLACEMENT
AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE
PURCHASER. BRONDELL SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR
OTHER INCIDENTAL, SPECIAL, FOR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE
PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF
REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF
MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES
DO NOT ALLOW LIMITATIONS, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
How to Obtain Service
To obtain repair service under this warranty, you must contact an authorized BRONDELL Service Center to
obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy of the
original receipt must accompany the returned unit for the warranty to be valid. Take or ship the unit pre-
paid to the closest Brondell authorized service center along with the RMA number and proof of purchase.
To obtain the RMA number and locate the BRONDELL Service Center location nearest you, please call
1-888-542-3355.
12
CONTACT:
Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
Phone: 1-888-542-3355
Web: www.brondell.com
For questions, contact Brondell Customer Service: 1-888-542-3355
MANUFACTURED BY:
Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
Please retain receipt records for any warranty claims.
MANUAL DEL USUARIO
PS-65 Accesorio para el bidé
Características del producto ..........Página 15
Lista de piezas ......................Página 16
Especificaciones del producto .........Página 17
Instalación ..........................Página 17
Funcionamiento .....................Página 22
Mantenimiento ......................Página 23
Garantía ............................Página 24
Contactar ...........................Página 25
Versión Inglesa ......................Página 2
Versión Francés .....................Página 26
ÍNDICE
14
CARACTERÍSTICAS DEL PRODUCTO
Material ABS antibacterial de calidada alta con panel completo
Boquilla higiénica retráctil
Función de autolimpieza de la boquilla
Lavado de bidé a temperatura ambiente
Posicionamiento de la boquilla
Presión de agua adaptable
Válvula interna de núcleo de cerámica con construcción
“Uni-body” patentado por seguridad
Válvula en T de 7/8 de alta calidad
Manguera de metal trenzado de bidé para la agua fría
No requiere energía eléctrica ni baterías
Fácil instalación y ajustable al inodoro
Todos los accesorios para una instalación estándar incluidosño
1 año de garantía
15
16
Accesorio para el bidé con perilla de control y soportes ajustables
Conector de válvula en T
⁄" x ⁄" x ⁄"
Manual del usuario
Unión de goma grande (2)
LISTA DE PIEZAS
¿QUÉ HAY EN LA CAJA?
Manguera de metal trenzado
de bidé para la agua fría (25")
ESPECIFICACIONES DEL PRODUCTO
INSTALACIÓN
IMPORTANTE
Por favor, tenga en cuenta que la
proporcionada válvula en T debe ser
instalada en la válvula de llenado
bajo el tanque del inodoro, y no en el
suministro de agua fría procedente
de la pared.
Si usted no tiene acceso a la
válvula de llenado bajo el tanque
del inodoro, póngase en contacto
Brondell Servicio al Cliente al
888.542.3355. Podemos ser capaces
de guiarlo a través del proceso.
4.1"7.9"
3.14"
1.3" en el punto más bajo en el
panel de control
0.4" bajo
13.4"
6.3"
5.5"
17
18
1. Etirar el asiento del inodoro existente
a. Levante las cubiertas de las bisagras y
utilice la cabeza plana de un destornillador
de cabeza Phillips para retirar los pernos
de montaje. Alternativamente, es posible
que deba desajustar los pernos de montaje
debajo del asiento.
b. Retire el asiento del inodoro y coloque el
asiento, montando los pernos y las piezas
originales a un lado.
INSTALACIÓN cont.
Compruebe la Línea de Suministro de Agua
Verifique la línea de suministro de agua que conecta el tanque del inodoro a la
válvula de corte de agua en la pared. Si es una cañería rígida, deberá reemplazarla
por una manguera flexible para suministro de agua antes de instalar el PureSpa.
La extensión de la manguera varía, la conexión superior debe ser un flotador de
7/8" in para conectarse a su válvula de llenado debajo del tanque del inodoro.
ANTES DE INSTALACIÓN
INSTALAR EL ACCESORIO BIDÉ
Etapa 1b
Etapa 2c
2. Cierre de la válvula de corte de suministro de
agua y descargue el inodoro
a. Corte el suministro de agua en la pared para
detener el flujo de agua.
b. Descargue el inodoro y mantenga hacia abajo
la manivela para vaciar el tanque del inodoro
completamente.
c. Desconecte la manguera del suministro
de agua.
3. Conectar el 7/8" válvula en T de la línea del
suministro de agua y válvula de llenado bajo
tanque del inodoro.
a. Instalar el 7/8" válvula en T con uno o los dos
de gomas para la conexión de agua entrante
en la parte inferior de la cisterna del retrete.
b. Conectar la línea de suministro de agua fría
procedente de la pared a la parte inferior de
la válvula en T.
4. Conexión de la manguera del bidé a la válvula
en T
a. Conecte uno de los extremos de la manguera
de metal trenzado de bidé con el extremo
abierto restante de la válvula en T.
Etapa 3a
Etapa 3b
Etapa 4a
19
INSTALACIÓN cont.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

brondell PureSpa Easy Bidet Toilet Attachment Le manuel du propriétaire

Taper
Le manuel du propriétaire