Ritron VHF PR-1317 DMR Manuel utilisateur

Marque: Ritron

Modèle: VHF PR-1317 DMR

Catégorie: Radios bidirectionnelles

Taper: Manuel utilisateur

Ce manuel convient également à

Dear Valued Ritron Customer,

Thank you for your purchase of the PR Series radio. Each radio comes

pre-programmed with the *4 factory default channel frequencies listed below.

The frequencies can be changed via the PC programming software and cable.

Other factory default radio settings i.e. Programmable Function Buttons are

listed on pages 1 and 6.

If your company currently has an FCC license on frequencies different from the

default frequencies, the radio can be PC programmed to custom frequencies

using optional Ritron PR Series PC software, other settings can also be

congured. Please contact your Ritron Reseller for information on “custom”

radio programming services.

Please be advised that operation on the factory default frequencies

require that you obtain an FCC Operator License BEFORE USE.

Freq. Technology Color Code/

Channel Code Frequency Type Tone Freq. TXPower

VHF PR-1317 Default Frequency Settings – Operating Band 136-174MHz

Ch1 FC #3 151.6250MHz DMR Digital 1 Color Code 5 Watts

Ch2 FC #4 151.6250MHz Analog 77Hz 5 Watts

Ch3 FC #4 151.955MHz DMR Digital 1 Color Code 5 Watts

Ch4 FC #4 151.955MHz Analog 77Hz 5 Watts

UHF PR-4047 Default Frequency Settings – Operating Band 400- 470MHz

Ch1 FC #5 467.8500MHz DMR Digital 1 Color Code 2 Watts

Ch2 FC #5 467.850MHz Analog 77Hz 2 Watts

Ch3 FC #3 464.550MHz DMR Digital 1 Color Code 4 Watts

Ch4 FC #3 464.550MHz Analog 77Hz 4 Watts

FC# = Frequency Code

Analog = Narrow Band (12.5KHz)

The standard antenna supplied with the PR Series radio is cut for

operation at the following frequency bands:

VHF: 150-165MHz

UHF: 450-470MHz

Note: Operation on frequencies outside this range will require

a custom cut antenna.

Professional Two-Way

PR Series Portable Radio

User Manual

Models: VHF PR-1317 DMR

UHF PR-4047 DMR

505 W. Carmel Drive/P.O. Box 1998, Carmel, IN 46032 • P.O. Box 1998 • Phone: 317.846.1201 • Email: [email protected]

respective owners. Ritron v. 10/16/20

800-USA-1-USA (872-1-872)

www.ritron.com

•

DMR Digital, Tier-2, Conventional and

Analog, Narrow Band Capable

•

5 / 2 Watt VHF, 4 / 2 Watt UHF

•

32 Channel Capability – 2 Zones of 16

•

Loud Audio Output - 1000mW

•

Rugged, Compact Design

•

Resistant to Water/Dust Intrusion

FCC and IC (Industry Canada) Approved

PR Radio

Drop-in Charging Tray

Installing Audio Accessories

1. Remove the fastener that secures the

audio accessory dust cover to the radio.

2. Plug in the Ritron 2-pin audio accessory

Battery Installation/Removal

1. Turn the radio OFF.

2. Align tabs at TOP of battery pack with the

slots at the TOP of the radio body.

3. Pivot the BOTTOM of the battery towards the

radio body until you hear the spring latches

engage with a click at the bottom of the radio.

To Remove

1 Turn radio OFF.

2. Slide latch at BOTTOM in direction of the

OPEN arrow.

3. Gently pivot the BOTTOM of the battery

pack away from the radio.

2. 3.

Models Description

PR-1317 DMR VHF, *136-174MHz

5 Watt or 2 Watt

32 Channel Capacity

PR-4047 DMR UHF, *400-470MHz

4 Watt or 2 Watt

32 Channel Capacity

*Standard antenna supplied is

cut for operation in the following

frequency ranges:

VHF: 150-165MHz

UHF: 450-470MHz

Operation on frequencies outside this

range will require custom cut antenna.

110-220V

AC Adaptor

CONTENTS PAGE

Default Frequencies & Settings..... ...1

Included Items.………………............2

Accessories.……………..……….... ..3

Controls and Functions ........... .....4-5

LED Display Indicators.....................5

Charger Information..........................5

Battery Information...........................5

Operating Your Radio .......................6

FCC Regulations, Safety, Service......7

RF Energy Exposure Information.....8

Ritron Warranty Information ...........10

RHD-16X

RSM-10X

2-pin

ITEMS INCLUDED

WITH EACH RADIO

Spring Action

Belt Clip

Flex Antenna

Note: The frequency

band is shown on the

bottom of antenna.

UHF = 400-470MHz

VHF = 136-174MHz

Lithium Polymer

Battery Pack

ACCESSORIES Part No.

Ear Loop with PTT RHD-16X

& Microphone, 2 Pin Conn

Speaker Microphone, 2 Pin RSM-10X

Replacement, Battery Pack BP-PR-Li20

Replacement, Belt Clip CB-PR

6 Unit Gang Charger BC-6PRGang

Standard PR series audio accessories e.g. remote speaker

mic and earset are not compatible with VOX function.

VOX function requires special VOX capable audio accessories.

Contact factory for availability.

Controls

Your Ritron dealer can program *PFB’s

to perform specic functions.

1. * Emergency Button – Top - Orange

2. Push-To-Talk Button (not programmable)

3. * Side Button - Above PTT Button

4. * Side Button - Below PTT Button

5. Lower Side Button – No Function

(not programmable)

6. LED Indicators. The indicator can be

enabled or disabled via programming.

Red = Transmit

Green = Receiving

Flashing Orange = Scanning

7. On/Off Volume Control

8. Channel Control – 16 position.

32 channels using 2 Zones

9. Built-in Speaker

10. Built-in Microphone

11. Audio Accessory/Dust Cover

12. Spring-action Belt Clip

Battery Pack

• Fully charge the battery before use for

maximum capacity and operation.

• The battery is designed for the PR Series

charger only. Please do not charge the battery

with any other brand charger.

• Turn the radio off before charging.

• Do not disassemble.

• If the battery terminal is contacted with any metals or conductive

substances, it may do harm to the body or battery.

• Battery Type: Rechargeable Lithium-Polymer, 2000mAH

• Battery Life: Duty cycle: 5% transmit, 5% receive,

90% standby = more than 12 hours

Getting To Know Your

PR Series Radio

Functions That Can Be Allocated to a *Programmable Function Button

1. Emergency Call: initiates an emergency alarm or call dened by programing.

2. PTT Call: initiates a portable radio call.

3. VOX Control: Enables or disables VOX function.

4. TX Power: Change transmit power from high to low power.

5. Monitor: Enables or disables the squelch function.

6. Remote Kill: Remotely powers OFF the PR radio.

7. Remote Activation: Remotely powers ON the radio.

8. Zone Switch: Changes current Zone of the PR radio. Two Zones are available.

9. Remote Listen: Allows remote listening of the PR radio.

10. Talk-Around: Enables or disables the Talk-Around through a repeater.

11. Remote Detection: Checks whether the peer device is operating.

12. Scanning On/Off: Enables or disables scanning.

13. Shortcut call key 1~5: initiates a voice call or a message call with a

shortcut Hot Key.

Color Status of Charging Tray LED

Steady RED.........Battery Charging

Steady GREEN....Battery Charging Complete

Steady AMBER....Trickle Charge, Replace Battery

Blinking AMBER...Abnormal Temperature

Blinking RED........Replace Battery

BC-PR Charger Tray and AC Adaptor

Operating instruction:

• Insert AC Adaptor into the Charging Tray.

• Plug the AC power cube into a wall outlet.

• Turn the transceiver off.

• Insert the battery pack into the charger

with or without the transceiver attached.

Specications:

• Input voltage: 12VDC, 1A

• Output voltage: 8.4VDC, 850mA

• Charge time: 2

/2 hours

Antenna - Thread

the matching antenna

until mating connector

is fully seated.

• A voice announcement will be heard on each channel change depending on

channel type. (e.g. “Digital 1”, “Analog 2”)

• To Talk, press and hold the PTT button, speak into the microphone on the

radio, and Release to listen.

Note: For maximum clarity hold the radio 2-3 radio inches away from your

mouth and speak in a normal tone of voice.

Programmable Function Buttons (PFB’s)

Programmable Function Buttons (PFB) provide easy, one-button access to a

specic feature/function. When momentarily pressed, the PFB can be PC pro-

grammed to operate as follows:

• No function when pressed

• Turn ON or OFF a specic feature assigned to that PFB,

• Send a Call Tone or other functions if noted as Yes under the heading

PFB Assignable in the tables starting on page 5.

The table listed below indicates the Factory Default settings for each of the PFB’s

on your radio.The default function can be changed via PC programming, contact

Ritron for details.

Operating Your PR Series Portable Radio

6. 7.

Factory

PF Button Default Function Description of Function

#1. Orange None

#3. Side Button None

(Upper)

#4. Side Button Monitor Analog Ch. A momentary press of the

(Top)

Monitor Button will unmute the receiver

and you will hear all radio trafc on the

channel. If there is no radio trafc on the

channel, you will hear continuous squelch

noise. A second press of the Monitor Button

will mute the radio receiver.

Digital Ch.- No function, error tone will sound.

(Top)

#5. Side Button Not Programmable

(Lower)

FCC REGULATIONS LICENSING

The FCC requires the owners or NT Series radios to obtain a station license before

using them.The station licensee is responsible for ensuring that transmitter power,

frequency and deviation are within the limits specied by the station license.

The staion licensee is also responsible for proper operation and maintenance of

the radio eqipment. This includes checkiing the transmitter frequency and deviation

periodically, using appropriate methods.To get a FCC license for VHF or UHF

frequencies, contact your Ritron dealer for help with this process.

SAFETY STANDARDS

The FCC (with its action in General Docket 79-144, (March 13, 1985) has adopted

a safety standard for human exposure to radio frequency electromagnetic energy

emitted by FCC regulated equipment. Ritron observes these guidelines and

recommends that you do also:

• DO NOT hold the radio so that the antenna is very close to or touching exposed

parts of the body, especially the face or eyes, while transmitting. Keep the radio

vertical, four inches away while talking into the front panel.

• DO NOT press the Push-To-Talk except when you intend to transmit.

• DO NOT operate radio equipment near electrical blasting caps or in an

explosive atmosphere.

• DO NOT allow children to play with any radio equipment that contains

a transmitting device.

• Repair of Ritron products should be performed only by Ritron

authorized personnel.

SERVICE

Federal law prohibits you from making any internal adjustments to the transmitter

and/or from changing transmit frequencies unless you are specically designated

by the licensee.

If your radio equipment fails to operate properly, or you wish to have the

radio programmed, contact your authorized dealer or Ritron.

RITRON, INC.,

c/o Repair Department

505 West Carmel Drive,

Carmel, IN 46082-1998

Phone: 317-846-1201

Fax: 317-846-4978

SENSIBILISATION À L’EXPOSITION ÉNERGIE RF ET LE CONTRÔLE DES INFORMATIONS

SENSIBILISATION À L’EXPOSITION ÉNERGIE RF ET LE CONTRÔLE DES INFORMATIONS ET INSTRUCTIONS OPÉRA-

TIONNELLES POUR LES EXIGENCES D’UTILISATION PROFESSIONNELLES FAC

AVANT D’UTILISER VOTRE PORTABLE RADIO 2-WAY, LIRE CETTE IMPORTANTE SENSIBILISATION À L’ÉNERGIE RF ET LES

INFORMATIONS DE CONTRÔLE ET LES INSTRUCTIONS OPÉRATIONNELLES POUR ASSURER LA CONFORMITÉ AVEC LES

DIRECTIVES D’EXPOSITION RF DE FAC.

Avis: Cette radio est destinée pour utilisation dans des conditions professionnelles et contrôlées, où les utilisateurs ont connaissance

de leur exposition et peuvent exercer un contrôle sur leur exposition pour répondre aux limites de la FCC. Ce dispositif radio n’est

pas autorisé pour la population générale, consommateur ou toute autre utilisation.

Cette radio 2 voies utilise l’énergie électromagnétique dans le spectre des radiofréquences (RF) à fournir des communications entre

deux ou plusieurs utilisateurs sur une distance. Il utilise une énergie radiofréquence (RF) ou des ondes radio pour envoyer et recevoir

des appels. L’énergie RF est une forme d’énergie électromagnétique. Autres formes incluent, mais ne se limitent pas à l’énergie

électrique, les rayons du soleil et les rayons x. Énergie RF, cependant, ne faut pas confondre avec ces autres formes d’énergie

électromagnétique, qui lorsqu’il est utilisé correctement peuvent causer des dommages biologiques. Par exemple, des niveaux

très élevés de rayons x, peuvent endommager les tissus et le matériel génétique.

Experts en sciences, ingénierie, médecine, santé et industrie collaborent avec les organisations à élaborer des normes pour

l’exposition à l’énergie RF. Ces normes fournissent des niveaux recommandés d’exposition RF pour les travailleurs et le grand

public. Ces recommandé niveaux d’exposition RF comprennent des marges importantes de protection. Toutes les radios 2-way

commercialisés en Amérique du Nord sont conçus, fabriqués et testés pour s’assurer qu’ils répondent aux niveaux d’exposition RF

gouvernement établi. En outre, les fabricants recommandent également les instructions d’exploitation spéciques aux utilisateurs

de radios 2 voies. Ces instructions sont importantes parce qu’ils informer les utilisateurs sur l’exposition énergie RF et fournissent

un simples procédures à suivre pour le contrôler. Veuillez consulter les sites Web suivants pour plus d’informations sur ce qu’est

l’exposition énergie RF et comment contrôler votre exposition à assurer le respect des limites d’exposition RF établies.

http://www.fcc.gov/OET/rfsafety/RF-FAQs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html

Règles de la FCC The FEDERAL COMMUNICATIONS COMMISSION règlements exigent que les fabricants à respecter les limites

d’exposition énergie RF FCC pour des radios portatives 2 voies avant qu’ils peuvent être commercialisés aux États-Unis. Lorsqu’on

utilise des radios 2 voies de l’emploi, la FCC oblige les utilisateurs à être pleinement conscient et capable de contrôler leur exposition

pour répondre aux exigences professionnelles. Sensibilisation à l’exposition peut être facilitée par l’utilisation d’une étiquette de

produit enjoignant aux utilisateurs de l’information de sensibilisation utilisateur spécique. Votre radio 2 voies de la série J Ritron a

une étiquette de produit de l’exposition RF. Aussi, ce manuel de l’utilisateur comprend les renseignements et les instructions

nécessaires pour contrôler votre exposition RF et à satisfaire les exigences de conformité d’exploitation. (Voir suite page)

CONFORMITÉ AVEC LES NORMES D’EXPOSITION RF

Votre radio 2 voies de Ritron est conçu et testé pour se conformer à un certain nombre de normes nationales et internationales et

lignes directrices (ci-dessous) pour l’exposition des humains à l’énergie électromagnétique radiofréquence. Cette radio est conforme

à l’IEEE et Limites d’exposition pour l’exposition RF au travail et contrôlées CIPRNI l’environnement de fonctionnement des facteurs

de l’obligation de jusqu’à 50 % de transmission et est autorisée par la FCC uniquement à des ns professionnelles. En termes

mesurer l’énergie RF pour le respect de l’exposition de la FCC lignes directrices, votre radio irradie mesurable énergie RF

seulement alors qu’il transmet (au cours de parler), pas quand il reçoit (écouter) ou en mode veille.

Remarque: Les piles approuvés fournis avec cette radio sont évalués pour un facteur de devoir 5-5-90 (5 % talk-5 % listen

- standby 90 %), même si cette radio conforme aux limites d’exposition RF professionnelle les FCC et peut s’appliquer à des

facteurs de l’obligation de jusqu’à 50 % talk.

Votre radio 2 voies de Ritron est conforme à la RF suivant énergie exposition normes et lignes directrices :

• United States Federal Communications Commission, Code of Federal Regulations ; 47 CFR JJ, 1.1307, 1.1310, 2.1091 et 2.1093

• American National Standards Institute (ANSI) / Institut de Electrical and Electronic Engineers (IEEE) C95.3-2003

• Institute of Electrical and Electronic Engineers (IEEE) C95.3 2003 Edition

LIGNES DIRECTRICES DE CONTRÔLE ET DE CONFORMITÉ DE L’EXPOSITION RF ET LES INSTRUCTIONS D’EXPLOITATION

Pour contrôler votre exposition et à assurer le respect de l’environnement au travail/contrôlé les limites d’exposition toujours

respectent les procédures suivantes.

LIGNES DIRECTRICES:

• Ne pas enlever l’étiquette de l’exposition RF du périphérique.

• Ce manuel de l’utilisateur doit accompagner le périphérique lorsque transférés à d’autres utilisateurs.

• Ne pas utiliser ce dispositif si les exigences opérationnelles décrits ci-après ne sont pas remplies.

MODE D’EMPLOI :

• Transmettre le facteur de devoir nominale de 50 % du temps. Pour transmettre (talk), appuyez sur le bouton de

Push-To-Talk (PTT). Pour recevoir des appels, relâchez le bouton PTT. Transmission de 50% de l’époque, ou moins, est

important parce que cette radio génère mesurable exposition d’énergie RF seulement lors de la transmission (en termes de

conformité aux normes de mesure).

• Tenir la radio en position verticale, en face de visage avec le microphone (et les autres parties de la radio, y compris la antenne)

au moins un pouce (2,5 cm) loin du nez. K e e p je g n la radio à la bonne distance est important parce que l’exposition RF

diminue avec la distance de l’antenne. Antenne doit rester loin des yeux.

• Lorsqu’elles sont portées sur le corps, a toujours lieu la radio dans un clip, titulaire, étui, cas ou harnais pour ce produit Ritron

approuvé. À l’aide d’accessoires de portés par l’organisme agréés est important parce que l’utilisation de Ritron ou autre

fabricant non - approuvé accessoires peuvent entraîner des niveaux d’exposition, qui dépassent les limites d’exposition

professionnelle et contrôlées environnement RF de FAC.

• Si vous n’utilisez pas un accessoire porté par l’organisme et n’utilisez pas la radio dans la position de l’utilisation prévue de la

face, puis assurer l’antenne et la radio sont conservés au moins 2,5 cm (un pouce) de l’organisme lors de la transmission. Il est

important de garder la radio à la distance appropriée, car l’exposition RF diminue avec l’augmentation de la distance de l’antenne.

• Utilisation seulement Ritron approuvé fournie ou antennes de remplacement, batteries et accessoires. Utilisation de Ritron non

approuvée antennes, batteries, et accessoires peuvent dépasser les lignes directrices d’exposition RF de la FCC.

• Pour obtenir une liste d’accessoires Ritron approuvé voir ce manuel de l’utilisateur, ou visitez http://www.ritron.com ou appelez

Ritron au 800-872-1872.

CONTACT INFORMATION

Pour plus d’informations sur les exigences d’exposition ou d’autres renseignements, veuillez communiquer avec

Ritron au 800-872-1872.

Avez-vous des questions? Composez le 800-USA-je-USA (800-872-1872) ou visitez notre site Web à www.ritron.com

RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION

RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION, AND

OPERATIONAL INSTRUCTIONS FOR FCC OCCUPATIONAL USE REQUIREMENTS

BEFORE USING YOUR PORTABLE 2-WAY RADIO, READ THIS IMPORTANT RF ENERGY AWARENESS AND

CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS TO ENSURE COMPLIANCE WITH THE FCC’S

RF EXPOSURE GUIDELINES.

NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure

and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population,

consumer, or any other use.

This 2-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or

more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form

of electromagnetic energy. Other forms include, but are not limited to, electric power, sunlight and x-rays. RF energy, however,

should not be confused with these other forms of electromagnetic energy, which when used improperly can cause biological

damage. Very high levels of x-rays, for example, can damage tissues and genetic material.

Experts in science, engineering, medicine, health and industry work with organizations to develop standards for exposure to RF

energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recom-

mended RF exposure levels include substantial margins of protection. All 2-way radios marketed in North America are designed,

manufactured and tested to ensure they meet government established RF exposure levels. In addition, manufacturers also

recommend specic operating instructions to users of 2-way radios. These instructions are important because they inform users

about RF energy exposure and provide simple procedures on how to control it. Please refer to the following websites for more

information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits.

http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.fcc.gov/oet/rfsafety/rf-faqs.html

http://www.osha.gov/SLTC/radiofrequencyradiation/index.html

FEDERAL COMMUNICATIONS COMMISSION REGULATIONS -The FCC rules require manufacturers to comply with the FCC

RF energy exposure limits for portable 2-way radios before they can be marketed in the U.S. When 2-way radios are used as a

consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational

requirements. Exposure awareness can be facilitated by the use of a product label directing users to specic user awareness

information. Your Ritron PT Series 2-way radio has an RF exposure product label. Also, this user manual includes information

and operating instructions required to control your RF exposure and to satisfy compliance requirements.

COMPLIANCE WITH RF EXPOSURE STANDARDS -Your Ritron 2-way radio is designed and tested to comply with a number

of national and international standards and guidelines (listed below) for human exposure to radio frequency electromagnetic

energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at

operating duty factors of up to 50% transmitting and is authorized by the FCC for occupational use only. In terms of measuring

RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmit-

ting (during talking), not when it is receiving (listening) or in standby mode.

NOTE: The approved batteries supplied with this radio are rated for a 5-5-90 duty factor (5% talk - 5% listen - 90% standby),

even though this radio complies with the FCC occupational RF exposure limits and may operate at duty factors of up to 50% talk.

Have questions? Call 800-USA-I-USA (800-872-1872) or visit our website at www.ritron.com

Your Ritron 2-way radio complies with the following RF energy exposure standards and guidelines:

• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR JJ 1.1307,

1.1310, 2.1091 and 2.1093

• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95.3-2003

• Institute of Electrical and Electronic Engineers (IEEE) C95.3 2003Edition

RF EXPOSURE COMPLIANCE AND CONTROL GUIDELINES AND OPERATING INSTRUCTIONS -To control your

exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the

followingprocedures.

GUIDELINES:

• Do not remove the RF Exposure Label from the device.

• This user manual should accompany device when transferred to other users.

• Do not use this device if the operational requirements described herein are not met.

OPERATING INSTRUCTIONS:

• Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button.

To receive calls, release the PTT button. Transmitting 50%

of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting

(in terms of measuring for standards compliance).

• Hold the radio in a vertical position in front of face with the microphone (and the other parts of the radio, including

the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important

because RF exposures decrease with distance from the antenna. Antenna should be kept away from eyes.

• When worn on the body, always place the radio in a Ritron approved clip, holder, holster, case, or body harness

for this product. Using approved body-worn accessories is important because the use of other manufacturers’

non- approved accessories may result in exposure levels, which exceed the FCC’s occupational /controlled

environment RF exposure limits.

• If you are not using a body-worn accessory and are not using the radio in the intended use position in front of the face,

then ensure the antenna and the radio are kept at least 2.5 cm (one inch) from the body when transmitting. Keeping the

radio at the proper distance is important because RF exposures decrease with increasing distance from the antenna.

• Use only Ritron approved supplied or replacement antennas, batteries, and accessories. Use of non-Ritron approved

antennas, batteries, and accessories may exceed the FCC RF exposure guidelines.

• For a list of Ritron approved accessories see this user manual, or visit http://www.ritron.com http://www.ritron.com,

or call Ritron at 800-872-1872.

CONTACT INFORMATION

For additional information on exposure requirements or other information, contact Ritron at 800-872-1872.

Have questions? Call 800-USA-I-USA (800-872-1872) or visit our website at http://www.ritron.com

9.8.

RITRON, INC. LIMITED WARRANTY

WHAT THIS WARRANTY COVERS:

RITRON, INC. (“RITRON”) provides the following warranty against defects in materials and/or

workmanship in RITRON Radios and Accessories under normal use and service during the applicable

warranty period (as stated below). “Accessories” means antennas, holsters, chargers, earphones,

speaker/microphones and items contained in the programming and programming/service kits.

WHAT IS COVERED FOR HOW LONG WHAT RITRON WILL DO

PR Series Radios 1 year* During the rst year after date of purchase,

RITRON will repair or replace the defective

product, at RITRON’s option, parts and labor

included at no charge.

Accessories 90 days* *After date of purchase

WHAT THIS WARRANTY DOES NOT COVER:

• Any technical information provided with the covered product or any other RITRON products;

• Installation, maintenance or service of the product, unless this is covered by a separate

written agreement with RITRON;

• Any products not furnished by RITRON which are attached or used with the covered

product, or defects or damage from the use of the covered product with equipment that

is not covered (such as defects or damage from the charging or use of batteries other

than with covered product);

• Defects or damage, including broken antennas, resulting from:

- misuse, abuse, improper maintenance, alteration, modication, neglect, accident or act of God,

- the use of covered products other than in normal and customary manner or,

- improper testing or installation;

• Defects or damages from unauthorized disassembly, repair or modication, or where unauthorized dis-

assembly, repair or modica-tion prevents inspection and testing necessary to validate warranty claims;

• Defects or damages in which the serial number has been removed, altered or defaced.

• Batteries if any of the seals are not intact.

IMPORTANT: This warranty sets forth the full extent of RITRON’s express responsibilities regarding the

covered products, and is given in lieu of all other express warranties. What RITRON has agreed to do

above is your sole and exclusive remedy. No person is authorized to make any other warranty to you on

behalf of RITRON. Warranties implied by state law, such as implied warranties of merchantability and

tness for a particular purpose, are limited to the duration of this limited warranty as it applies to

the covered product. Incidental and consequential damages are not recoverable under this warranty (this

includes loss of use or time, inconven-ience, business interruption, commercial loss, lost prots

or savings). Some states do not allow the exclusion or limitation of incidental or consequential damages,

or limitation on how long an implied warranty lasts, so the above limitations or exclusions may not apply

to you. Because each covered product system is unique, RITRON disclaims liability for range, coverage,

or operation of the system as a whole under this warranty.

WHO IS COVERED BY THIS WARRANTY:

This warranty is given only to the purchaser or lessee of covered products when acquired for use,

not resale. This warranty is not assignable or transferable.

HOW TO GET WARRANTY SERVICE:

To receive warranty service, you must deliver or send the defective product, delivery costs and insurance

prepaid, within the applicable warranty period, to

RITRON, INC., 505 West Carmel Drive, Carmel, Indiana 46032,

Attention: Warranty Department.

Please point out the nature of the defect in as much detail as you can. You must retain your sales or

lease receipt (or other written evidence of the date of purchase) and deliver it along with the product. If

RITRON chooses to repair or replace a defective product, RITRON may replace the product or any part

or component with reconditioned product, parts or components. Replacements are covered for the

balance of the original applicable warranty period. All replaced covered products, parts or components

become RITRON’s property.

RIGHTS TO SOFTWARE RETAINED :

Title and all rights or licenses to patents, copyrights, trademarks and trade secrets in any RITRON

software contained in covered products are and shall remain in RITRON. RITRON nevertheless grants

you a limited non-exclusive, transferable right to use the RITRON software only in conjunction with

covered products. No other license or right to the RITRON software is granted or permitted.

YOUR RIGHTS UNDER STATE LAW: This warranty gives you specic legal rights, and you may also

have other rights which vary from state to state.

WHERE THIS WARRANTY IS VALID: This warranty is valid only within the United States, the

District of Columbia and Puerto Rico.

NOTES:

Questions? CALL 800-USA-1-USA (872-1872)

10. 11.

Ritron VHF PR-1317 DMR Manuel utilisateur

Marque: Ritron

Modèle: VHF PR-1317 DMR

Catégorie: Radios bidirectionnelles

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Ritron VHF PR-1317 DMR User manual

Ritron VHF PR-1317 DMR Manuel utilisateur

Ce manuel convient également à

Ritron VHF PR-1317 DMR Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents