Motorola XT420 Manuel utilisateur

XT420 Non-Display Model

User Guide

Two-Way Radios

en-US da-DK de-DE es-ES

fr-FR

it-IT nl-NL

nb-NO pl-PL pt-PT ru-RU fi-FI sv-SE tr-TR uk-UA

63M03_A_BRCAN_en.book Page 1 Monday, November 19, 2018 11:30 AM

Open Source Software Legal Notices:

This Motorola Solutions product contains Open Source Software. For information

regarding licenses, acknowledgements, required copyright notices and other usage

terms, refer to the documentation for this Motorola Solutions product at:

http://businessonline.motorolasolutions.com

Go to: Resource Center > Product Information > Manual > Accessories.

63M03_A_BRCAN_en.book Page 2 Monday, November 19, 2018 11:30 AM

English

1

CONTENTS

Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Computer Software Copyrights . . . . . . . . . .3

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Batteries and Chargers Safety Information 5

Operational Safety Guidelines. . . . . . . . . . . . .6

Radio Overview . . . . . . . . . . . . . . . . . . . . . . .7

Parts Of The Radio . . . . . . . . . . . . . . . . . . . . .7

On/Off/Volume Knob. . . . . . . . . . . . . . . . .8

Channel Selector Knob. . . . . . . . . . . . . . .8

Accessory Connector . . . . . . . . . . . . . . . .8

Model Label . . . . . . . . . . . . . . . . . . . . . . .8

Microphone . . . . . . . . . . . . . . . . . . . . . . . .8

Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . .8

LED Indicator . . . . . . . . . . . . . . . . . . . . . .8

Side Buttons . . . . . . . . . . . . . . . . . . . . . . .8

The Lithium-Ion (Li-Ion) Battery . . . . . . . .8

Batteries and Chargers. . . . . . . . . . . . . . . .10

Battery Features And Charging Options . . . .10

About the Li-Ion Battery . . . . . . . . . . . . .10

Installing the Lithium-Ion (Li-Ion) Battery 11

Removing the Lithium-Ion (Li-Ion) Battery .

11

Power Supply and Drop-in Tray Charger12

Holster . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Charging with the Drop-in Tray Charger

(SUC) . . . . . . . . . . . . . . . . . . . . . . . . . 13

Drop-in Tray Charger LED Indicators . . 15

Estimated Charging Time . . . . . . . . . . . 16

Multi-Unit Charger LED Indicators . . . . . 18

Getting Started . . . . . . . . . . . . . . . . . . . . . . 19

Turning radio ON/OFF . . . . . . . . . . . . . . . . . 19

Adjusting Volume . . . . . . . . . . . . . . . . . . . . . 19

Selecting a Channel . . . . . . . . . . . . . . . . . . . 19

Talking and Monitoring. . . . . . . . . . . . . . . . . 19

Receiving a Call . . . . . . . . . . . . . . . . . . . . . . 20

Talk Range. . . . . . . . . . . . . . . . . . . . . . . . . . 21

Radio LED Indicators . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Hands-Free Use/VOX . . . . . . . . . . . . . . . . . 23

With Compatible VOX Accessories . . . . 23

Setting iVOX Sensitivity . . . . . . . . . . . . . 23

Hands Free without Accessories (iVOX) 24

Microphone Gain . . . . . . . . . . . . . . . . . . 24

Toggle Voice Prompt in User Mode. . . . 24

63M03_A_BRCAN_en.book Page 1 Monday, November 19, 2018 11:30 AM

English

2

CONTENTS

Power Up - Tone Mode. . . . . . . . . . . . . .24

Reset to Factory Defaults . . . . . . . . . . . .24

Programming Features . . . . . . . . . . . . . . . .25

Advanced Configuration Mode . . . . . . . . . . .25

Entering Advanced Configuration Mode .26

Entering Frequencies Values . . . . . . . . .26

Reading CTCSS / DPL Values . . . . . . . .27

Reading Auto-Scan Values. . . . . . . . . . .27

Saving Settings. . . . . . . . . . . . . . . . . . . .27

Programming Values Example . . . . . . . . . . .29

Example of Programming a Frequency .29

Example of Programming a Code. . . . . .30

Example of Programming Auto-Scan . . .30

Other Programming Features . . . . . . . . . . . .31

Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Editing Scan List . . . . . . . . . . . . . . . . . . .31

Nuisance Channel Delete . . . . . . . . . . . .32

Customer Programming Software (CPS) . . .32

Time-Out Timer. . . . . . . . . . . . . . . . . . . .33

Call Tones. . . . . . . . . . . . . . . . . . . . . . . .33

Scramble . . . . . . . . . . . . . . . . . . . . . . . .34

Reverse Burst . . . . . . . . . . . . . . . . . . . . .34

Cloning Radios . . . . . . . . . . . . . . . . . . . . . . .35

Cloning with a Multi-Unit Charger (MUC)35

CPS and Cloning Cables (Optional Acces-

sory). . . . . . . . . . . . . . . . . . . . . . . . . . 37

Cloning Radio using the Radio to Radio

(R2R) Cloning Cable (Optional Accesso-

ry). . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Cloning using the Customer Programming

Software (CPS) . . . . . . . . . . . . . . . . . 40

Troubleshooting. . . . . . . . . . . . . . . . . . . . . 41

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Use and Care . . . . . . . . . . . . . . . . . . . . . . . 45

Frequency and Code Charts . . . . . . . . . . . 46

CTCSS and PL/DPL Codes . . . . . . . . . . . . . 48

Motorola Solutions Limited Warranty . . . 53

Accessories . . . . . . . . . . . . . . . . . . . . . . . . 55

Audio Accessories . . . . . . . . . . . . . . . . . . . . 55

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Carry Accessories . . . . . . . . . . . . . . . . . . . . 56

63M03_A_BRCAN_en.book Page 2 Monday, November 19, 2018 11:30 AM

English

3

COMPUTER SOFTWARE

COPYRIGHTS

COMPUTER SOFTWARE

COPYRIGHTS

The Motorola Solutions products described in

this manual may include copyrighted Motorola

Solutions computer programs stored in

semiconductor memories or other media. Laws

in the United States and other countries

preserve for Motorola Solutions certain

exclusive rights for copyrighted computer

programs, including, but not limited to, the

exclusive right to copy or reproduce in any form

the copyrighted computer program.

Accordingly, any copyrighted Motorola

Solutions computer programs contained in the

Motorola Solutions products described in this

manual may not be copied, reproduced,

modified, reverse-engineered, or distributed in

any manner without the express written

permission of Motorola Solutions.

Furthermore, the purchase of Motorola

Solutions products shall not be deemed to

grant either directly or by implication, estoppel,

or otherwise, any license under the copyrights,

patents or patent applications of Motorola

Solutions, except for the normal non-exclusive

license to use that arises by operation of law in

the sale of a product.

63M03_A_BRCAN_en.book Page 3 Monday, November 19, 2018 11:30 AM

English

4

SAFETY

PRODUCT SAFETY AND RF

EXPOSURE COMPLIANCE

ATTENTION!

This radio is restricted to occupational use only

to satisfy FCC / ICNIRP RF energy exposure

requirements.

For a list of Motorola Solutions-approved

antennas, batteries and other accessories, visit

the following website which lists approved

accessories:

www.motorolasolutions.com

Before using this product,

read the operating

instructions and RF energy

awareness information

contained in the Product

Safety and RF Exposure

booklet enclosed with your

radio.

!

C a u t i o n

63M03_A_BRCAN_en.book Page 4 Monday, November 19, 2018 11:30 AM

English

5

BATTERIES AND CHARGERS

SAFETY INFORMATION

BATTERIES AND

CHARGERS SAFETY

INFORMATION

This document contains important safety and

operating instructions. Read these instructions

carefully and save them for future reference.

Before using the battery charger, read all the

instructions and cautionary markings on

• the charger,

• the battery, and

• the radio using the battery

1. To reduce risk of injury, charge only the

rechargeable Motorola Solutions-authorized

batteries. Other batteries may explode, causing

personal injury and damage.

2. Use of accessories not recommended by

Motorola Solutions may result in risk of fire,

electric shock, or injury.

3. To reduce risk of damage to the electric plug

and cord, pull by the plug rather than the cord

when disconnecting the charger.

4. An extension cord should not be used unless

absolutely necessary. Use of an improper

extension cord could result in risk of fire and

electric shock. If an extension cord must be

used, make sure that the cord size is 18AWG

for lengths up to 100 feet (30.48 m), and

16AWG for lengths up to 150 feet (45.72 m).

5. To reduce risk of fire, electric shock, or injury, do

not operate the charger if it has been broken or

damaged in any way. Take it to a qualified

Motorola Solutions service representative.

6. Do not disassemble the charger; it is not

repairable and replacement parts are not

available. Disassembly of the charger may

result in risk of electrical shock or fire.

7. To reduce risk of electric shock, unplug the

charger from the AC outlet before attempting

any maintenance or cleaning

63M03_A_BRCAN_en.book Page 5 Monday, November 19, 2018 11:30 AM

English

6

BATTERIES AND CHARGERS

SAFETY INFORMATION

OPERATIONAL SAFETY

GUIDELINES

• Turn the radio OFF when charging battery.

• The charger is not suitable for outdoor use. Use

only in dry locations/conditions.

• Connect charger only to an appropriately fused

and wired supply of the correct voltage (as

specified on the product).

• Disconnect charger from line voltage by removing

main plug.

• The outlet to which this equipment is connected

should be nearby and easily accessible.

• In equipment using fuses, replacements must

comply with the type and rating specified in the

equipment instructions.

• Maximum ambient temperature around the power

supply equipment must not exceed 40°C (104°F).

• Power output from the power supply unit must not

exceed the ratings stated on the product label

located at the bottom of the charger.

• Make sure that the cord is located where it will

not be stepped on, tripped over, or subjected to

water, damage, or stress.

63M03_A_BRCAN_en.book Page 6 Monday, November 19, 2018 11:30 AM

English

7

RADIO OVERVIEW

PARTS OF THE RADIO

Antenna

Microphone

On/Off/Volume

Knob

LED

Indicator

SB2 - Scan/

Nuisance

Channel Delete

SB1 - Monitor

Battery

Model Label

PTT (Push-To-

Talk) Button

Channel Selector

Knob

Audio Accessory

2 Pin Connector

XT420

63M03_A_BRCAN_en.book Page 7 Monday, November 19, 2018 11:30 AM

English

8

RADIO OVERVIEW

On/Off/Volume Knob

Used to turn the radio ON or OFF and to adjust

the radio’s volume.

Channel Selector Knob

Used to switch the radio to different channels.

Accessory Connector

Used to connect compatible audio accessories.

Model Label

Indicates the model of the radio.

Microphone

Speak clearly into the microphone when

sending a message.

Antenna

For model XT420 the antenna is non-

removable.

LED Indicator

Used to give battery status, power-up status,

radio call information and scan status.

Side Buttons

Push-to-Talk (PTT) Button

• Press and hold down this button to talk, release it

to listen.

Side Button 1 (SB1)

• The Side Button 1 is a general button that can be

configured by the Customer Programming

Software - CPS. The SB1 default setting is

‘Monitor’.

Side Button 2 (SB2)

• The Side Button 2 is a general button that can be

configured by the CPS. The SB2 default setting is

‘Scan/Nuisance Channel Delete’.

The Lithium-Ion (Li-Ion) Battery

XT Series comes with a Standard Capacity

Li-Ion battery. Other batteries may be available.

For more information, see “Battery Features

And Charging Options” on page 10.

63M03_A_BRCAN_en.book Page 8 Monday, November 19, 2018 11:30 AM

English

9

RADIO OVERVIEW

This User Guide covers the XT420 Series models. The radio’s model is shown on the bottom of the

radio and provides the following information:

Table 1: XT420 Radio Specifications

Model

Frequency

Band

Transmit

Power

(Watts)

Number of

Channels

Antenna

XT420 PMR446 0.5 16 Non-removable

63M03_A_BRCAN_en.book Page 9 Monday, November 19, 2018 11:30 AM

English

10

BATTERIES AND CHARGERS

BATTERIES AND

CHARGERS

XT Series radios provide Lithium-Ion batteries

that come in different capacities that defines

the battery life.

BATTERY FEATURES AND CHARGING

OPTIONS

About the Li-Ion Battery

The XT Series radio comes equipped with a

rechargeable Li-Ion battery. This battery should

be fully charged before initial use to ensure

optimum capacity and performance.

Battery life is determined by several factors.

Among the more critical are the regular

overcharge of batteries and the average depth

of discharge with each cycle. Typically, the

greater the overcharge and the deeper the

average discharge, the fewer cycles a battery

will last. For example, a battery which is

overcharged and discharged 100% several

times a day, lasts fewer cycles than a battery

that receives less of an overcharge and is

discharged to 50% per day. Further, a battery

which receives minimal overcharging and

averages only 25% discharge, lasts even

longer.

Motorola Solutions batteries are designed

specifically to be used with a Motorola

Solutions charger and vice versa. Charging in

non-Motorola Solutions equipment may lead to

battery damage and void the battery warranty.

The battery should be at about 77°F (25°C)

(room temperature), whenever possible.

Charging a cold battery (below 50° F [10°C])

may result in leakage of electrolyte and

ultimately in failure of the battery. Charging a

hot battery (above 95°F [35°C]) results in

reduced discharge capacity, affecting the

performance of the radio. Motorola Solutions

rapid-rate battery chargers contain a

temperature-sensing circuit to ensure that

batteries are charged within the temperature

limits stated above.

63M03_A_BRCAN_en.book Page 10 Monday, November 19, 2018 11:30 AM

English

11

BATTERIES AND CHARGERS

Installing the Lithium-Ion (Li-Ion) Battery

1. Turn OFF the radio.

2. With the Motorola Solutions logo side up on the

battery pack, fit the tabs at the bottom of the

battery into the slots at the bottom of the radio’s

body.

3. Press the top part of the battery towards the

radio until a click is heard.

Note: To learn about the Li-Ion Battery Life

features, refer to “About the Li-Ion Battery”

on page 10

Removing the Lithium-Ion (Li-Ion) Battery

1. Turn OFF the radio.

2. Push down the battery latch and hold it while

removing the battery.

3. Pull the battery away from the radio.

Tabs

Slots

Attach

Press until click

Detach

Press Latch

Table 1: Li-Ion Battery Life with Tx Power

0.5 Watts

Battery Type

Battery Save

OFF

Battery

Save ON

Standard 16 Hours 20 Hours

High Capacity N/A N/A

63M03_A_BRCAN_en.book Page 11 Monday, November 19, 2018 11:30 AM

English

12

BATTERIES AND CHARGERS

Power Supply and Drop-in Tray Charger

Your radio comes with one Drop-in Tray

Charger and one Power Supply (also known as

Transformer) and a set of adaptors.

Your Power Supply is capable of switching to

suit any of the adaptors that comes with your

radio package.

The Adaptor you install depends on the region

you’re located.

Once you have identified the Adaptor that

matches your electrical outlet, proceed to

install it as follows:

• Slide down the Adaptor grooves into the

Power Supply until it snaps into place.

• Slide the Adaptor upward to remove.

Note: The adaptor shown in the pictures are for

illustration purposes only. The adaptor you

install may be different.

When acquiring additional Charger or Power

Supply, make sure you have the similar Drop-in

Tray Charger and Power Supply set.

Power Supply

Drop-in Tray Charger

PUSHPUSH

Power Supply

Power

Supply

Adaptor

63M03_A_BRCAN_en.book Page 12 Monday, November 19, 2018 11:30 AM

English

13

BATTERIES AND CHARGERS

Holster

1. Insert the radio into the base of the holster at an

angle. Press the radio against the back of the

holster until the hooks on the holster are

inserted in the top recesses of the battery..

2. To remove, using the top tab on the holster,

detach the hooks of the holster from the top

recesses of the battery. Slide the radio at an

angle and remove from the holster.

Note: To charge the battery (with the radio

attached), place it in a Motorola Solutions

approved Charger or Multi Unit Charger.

Charging with the Drop-in Tray Charger

(SUC)

1. Place the Charger on a flat surface.

2. Insert the connector of the Power Supply into

the port on the side of the Charger.

3. Plug the AC Adaptor into a power outlet.

4. Insert the radio into the Charger with the radio

facing the front, as shown.

Note: When charging a battery attached to a radio,

turn the radio OFF to ensure a full charge.

See “Operational Safety Guidelines” on

page 6 for more information.

Drop-in

Tray

Charger

Port

Drop-in Tray Charger

Power Supply

(Transformer)

63M03_A_BRCAN_en.book Page 13 Monday, November 19, 2018 11:30 AM

English

14

BATTERIES AND CHARGERS

Charging A Stand-Alone Battery

To charge only the battery - at step 4 on

page 13, insert the battery into the tray, with the

inside surface of the battery facing the front of

the Drop-in Tray Single Unit Charger as shown

above. Align the slots in the battery with the

alignment ribs in the Drop-in Tray Single Unit

Charger.

Table 2: Motorola Solutions Authorized

Batteries

Part Number Description

PMNN4434_R Standard Li-Ion Battery

PMNN4453_R

High Capacity Li-Ion

Battery

63M03_A_BRCAN_en.book Page 14 Monday, November 19, 2018 11:30 AM

English

15

BATTERIES AND CHARGERS

Drop-in Tray Charger LED Indicators

(*) Normally, re-positioning the battery pack will correct this issue.

(**) Battery temperature is too warm or too cold or wrong power voltage is being used.

If there is NO LED indication:

Table 3: Charger LED Indicator

Status LED Indicator Comments

Power On

Green for approximately 1 second

Charging

Steady Red

Charging Complete

Steady Green

Battery Fault (*)

Red Fast Flash

Waiting to Charge (**)

Amber Slow Flash

Battery Level Status

N/A Battery empty

Flash Red 1 Time

Battery low

Flash Amber 2 Times

Battery medium

Flash Green 3 Times

Battery High

63M03_A_BRCAN_en.book Page 15 Monday, November 19, 2018 11:30 AM

English

16

BATTERIES AND CHARGERS

1. Check if the radio with battery, or the battery alone, is inserted correctly. (refer to step 4 of "Charging with the

Drop-in Tray Charger (SUC)" on page 13)

2. Ensure that the power supply cable is securely plugged into the charger socket using an appropriate AC

outlet and there is power to the outlet.

3. Confirm that the battery being used with the radio is listed in Table 2 on page 14.

Estimated Charging Time

The following table provides the estimated charging time of the battery. For more information, see

“Batteries and Chargers Safety Information” on page 5.

Table 4: Battery Estimated Charging Time

Charging Solutions

Estimated Charging Time

Standard Battery High Capacity Battery

Standard ≤ 4.5 Hours N/A

Rapid ≤ 2.5 Hours N/A

63M03_A_BRCAN_en.book Page 16 Monday, November 19, 2018 11:30 AM

English

17

BATTERIES AND CHARGERS

Charging a Radio and Battery using

a Multi-Unit Charger - MUC (Optional

Accessory)

The Multi-Unit Charger (MUC) allows drop-in

charging of up to 6 radios or batteries. Batteries

can be charged with the radios or removed and

placed in the MUC separately. Each of the 6

charging pockets can hold a radio (with or

without the Holster) or battery, but not both.

1. Place the MUC on a flat surface.

2. Insert the power cord plug into the MUC’s dual

pin connector at the bottom of the MUC.

3. Plug the power cord into an AC outlet.

4. Turn the radio OFF.

5. Insert the radio or battery into the charging

pocket with the radio or battery facing away

from the contacts.

Note:

• This MUC clones up to 2 radios (2 Source radios

and 2 Target radios). Refer to “Cloning with a

Multi-Unit Charger (MUC)” on page 35 for more

information.

• More information on the MUC’s operation is

available in the Instruction Sheets provided with

the MUC. For more information on the parts and

their part numbers, refer to “Accessories” on

page 55.

Charging Contacts

Charging Indicator

Charging Pocket

Charger Power Receptacle

63M03_A_BRCAN_en.book Page 17 Monday, November 19, 2018 11:30 AM

English

18

BATTERIES AND CHARGERS

Multi-Unit Charger LED Indicators

(*) Normally re-positioning the battery pack will correct this issue

(**) Battery temperature is too warm or too cold or wrong power voltage is being used.

If there is NO LED indication:

1. Check if the radio with battery, or the battery alone, is inserted correctly. (refer to “Charging a Radio and

Battery using a Multi-Unit Charger - MUC (Optional Accessory)” on page 17)

2. Ensure that the power supply cable is securely plugged into the charger socket using an appropriate AC

outlet and there is power to the outlet.

3. Confirm that the battery being used with the radio is listed in Table 2 on page 14.

Table 5: Charger LED Indicator

Status LED Status Comments

Power On Green for approx. 1 sec

Charging Steady red

Charge Complete Steady green

Battery Fault (*)

Red fast flash

Waiting to charge (**)

Amber slow flash

Battery Level Status

Flash red 1 time

Battery low

Flash amber 2 times

Battery medium

Flash green 3 times

Battery high

63M03_A_BRCAN_en.book Page 18 Monday, November 19, 2018 11:30 AM

La page charge ...

Motorola XT420 Manuel utilisateur

Motorola XT420 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents