GE Retail Parts G8PKAASSRSS Manuel utilisateur

Write the model and serial numbers here:

Model # _________________

Serial # _________________

Find these numbers on a label

on the back of the unit.

GE is a trademark of the General Electric Company. Manufactured under trademark license.

OWNER’S

MANUAL

FOOD PROCESSOR

49-9000012 Rev. 3 04-21 GEA

G8P0AASSPSS

G8P1AASSPSS

G8PKAASSRSS

ENGLISH/

FRANÇAIS

SAFETY INFORMATION .........3

PARTS INCLUDED ..............6

ACCESSORY KIT ................8

GETTING STARTED .............9

CONTROLS ...................10

FUNCTIONS ...................10

CARE AND CLEANING .......... 11

TROUBLESHOOTING ...........12

LIMITED WARRANTY ..........15

CONSUMER SUPPORT ..........16

2 49-9000012 Rev. 3

THANK YOU FOR MAKING GE APPLIANCES A

PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first,

we’re happy to have you in the family.

We take pride in the craftsmanship, innovation and design that

goes into every GE Appliances product, and we think you will too.

Among other things, registration of your appliance ensures that

we can deliver important product information and warranty details

when you need them.

49-9000012 Rev. 3 3

SAFETY INFORMATION

WARNING

THE CUTTING TOOLS HAVE VERY SHARP EDGES.

IMPORTANT SAFEGUARDS

Always follow these safety precautions when using this appliance.

Getting Ready

1. Read all instructions.

2. Blade and discs are sharp. Handle them carefully.

3. Turn the appliance OFF, then unplug from the outlet when not in use, before

assembling or disassembling parts and before cleaning. To unplug, grasp the plug

and pull from the outlet. Never pull from the power cord.

4. Do not use outdoors.

5. Do not let cord hang over edge of table or counter.

6. Do not let cord contact hot surface, including the stove.

7. Do not operate any appliance with a damaged cord or plug or after the appliance

malfunctions, or is dropped or damaged in any manner. Contact GE Appliances at

the website listed in the Contact Us section for information on examination, repair,

or adjustment.

Operation

1. Keep hands as well as spatulas and other utensils away from moving blade

or discs while processing food to reduce the risk of severe personal injury or

damage to food processor. A plastic scraper may be used, but only when the food

processor motor is stopped.

2. Avoid coming into contact with moving parts. Never push food down by hand when

slicing or shredding. Always use pusher.

3. Make sure motor has completely stopped before removing cover. (If machine

does not stop within 4 seconds after you remove the bowl cover assembly, call

1.866.907.6718

for assistance. Do not use the machine.)

4. Never store any blade or disc on motor shaft. To reduce the risk of injury, no blade

or disc should be placed on the shaft except when the bowl is properly locked

in place and the processor is in use. Store blades and discs as you would sharp

knives, out of reach of children.

5. Be sure cover and feed tube are securely locked in place before operating food

processor.

6. Never try to override or tamper with cover interlock mechanism.

7. Do not fill the bowl above the marked maximum fill line (or rated capacity) to avoid

risk of injury due to damage to the cover or bowl.”

Cleaning

Ŷ 7RSURWHFWDJDLQVWULVNRIHOHFWULFDOVKRFNGRQRWSXWEDVHLQZDWHURURWKHUOLTXLGV

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE

USING THE APPLIANCE

READ AND SAVE THESE

INSTRUCTIONS

4 49-9000012 Rev. 3

WARNING

THE CUTTING TOOLS HAVE VERY SHARP EDGES.

IMPORTANT SAFEGUARDS Continued

General

1. This appliance is not intended for use by persons (including children) with reduced

physical, sensory, or mental capabilities, or lack of experience and knowledge,

unless they are closely supervised and instructed concerning use of the appliance

by a person responsible for their safety. Close supervision is necessary when any

appliance is used by or near children. Children should be supervised to ensure that

they do not play with the appliance.

2. Do not operate this, or any other motor-driven appliance, while under the influence

of alcohol or other substances that affect your reaction time or perception.

3. This food processor is for household use only. Use it only for food preparation

as described in the accompanying recipe and instruction book. Do not use this

appliance for anything but its intended use.

4. The use of attachments not recommended or sold by the manufacturer may cause

fire, electrical shock or personal injury, or damage to your food processor.

5. To avoid possible malfunction of work bowl switch, never store processor with

cover assembly in locked position.

6. Maximum rating of 550 watts is based on chopping blade on food processor bowl

as a food chopper draws greatest power. Other recommended attachments may

draw significantly less power.

7. Do not operate your appliance in an appliance garage or under a wall cabinet.

When storing in an appliance garage always unplug the unit from the electrical

outlet. Not doing so could create a risk of fire, especially if the appliance touches

the walls of the garage or the door touches the unit as it closes.

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE

USING THE APPLIANCE

SAFETY INFORMATION

READ AND SAVE THESE

INSTRUCTIONS

49-9000012 Rev. 3 5

WARNING

RISK OF FIRE OR ELECTRIC SHOCK

ŶTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK).

ŶDo not attempt to repair or replace any part of your food processor unless

it is specifically recommended in this manual. All other servicing should be

performed by authorized service personnel.

WARNING

THE CUTTING TOOLS HAVE VERY SHARP EDGES.

IMPORTANT SAFEGUARDS Continued

Care and Cleaning

• Like all powerful electrical appliances a food processor should be handled with care.

Follow these guidelines to protect yourself and your family from misuse that could

cause injury.

• Handle and store metal blade and discs carefully. Their cutting edges are very sharp.

• Never put blade or discs on the motor shaft until the work bowl is locked in place.

• Always be sure that the blade or disc is down on the motor shaft as far as it will go.

• Always insert the metal blade in the work bowl before putting ingredients in bowl.

:KHQVOLFLQJRUVKUHGGLQJIRRGDOZD\VXVHWKHSXVKHU1HYHUSXW\RXU¿QJHUVRU

spatula into feed tube.

• Always wait for the blade or disc to stop spinning before you remove the pusher

assembly or cover from the work bowl.

$OZD\VXQSOXJWKHXQLWEHIRUHUHPRYLQJIRRGFOHDQLQJRUSXWWLQJRQRUWDNLQJRႇ

parts.

• Always remove work bowl from base of machine before you remove the chopping/

mixing/dough blade.

• Be careful to prevent the chopping blade from falling out of the work bowl when

emptying the bowl. Remove it before tilting the work bowl.

NOTICE: This appliance has a plastic case, it has a polarized plug (one blade

is wider than the other). To reduce the risk of electric shock, this plug will fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the

SOXJ,ILWVWLOOGRHVQRWILWFRQWDFWDTXDOLILHGHOHFWULFLDQ'RQRWDWWHPSWWRGHIHDWWKLV

safety feature or modify the plug in any way.

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE

USING THE APPLIANCE

SAFETY INFORMATION

READ AND SAVE THESE

INSTRUCTIONS

6 49-9000012 Rev. 3

PARTS INCLUDED

Parts Included

A

B

D

C

F

E

A

Chute Plunger

B

Lid

C

Processing Chamber

D

Handle

E

Control Knob

F

Base

G8P0AASSPSS

Accessories

NOTE: Parts listed below are only included with model G8P0AASSPSS

Fine shredding / Slicing disc Medium shredding / Slicing disc

PARTS INCLUDED

49-9000012 Rev. 3 7

Parts Included

PARTS INCLUDED

A

B

D

C

F

E

A

Chute Plunger

B

Lid

C

Processing Chamber

D

Handle

E

Control Knob

F

Base

G8P1AASSPSS

NOTE: Parts listed below are only included with model G8P1AASSPSS

Accessories

Fine shredding /

Slicing disc

French fry disc Dough blade Mini-bowl

Emulsifying disc

Spatula

Mini S-blade

Grating disc

Medium shredding /

Slicing disc

8 49-9000012 Rev. 3

Accessory Kit

G8PKAASSRSS

ACCESSORY KIT

French fry disc Dough blade Mini-bowl

Emulsifying disc SpatulaMini S-bladeGrating disc

49-9000012 Rev. 3 9

GETTING STARTED

Getting Started

Before First Use

%HIRUHXVLQJ\RXUIRRGSURFHVVRUIRUWKH¿UVWWLPHZDVKWKHZRUNERZOZRUNERZOFRYHU

pusher, blade and discs in warm soapy water.

1. Place the food processor base on a dry, level

countertop with the controls facing you. Do

not plug the unit in until it is fully assembled.

2. With the bowl on the base, use the handle

to turn the work bowl clockwise to lock it

onto the housing base.

Chopping / Mixing / Dough Blade

1. Place the work bowl on top, with the work

bowl handle just to the right of center. Turn

the work bowl clockwise to lock it onto the

housing base.

2. Carefully lift and place the blade over the

work bowl accessory adapter. Blade should

rest on the bottom of the work bowl.

3. Plug in the housing base.

4. Add desired ingredients to work bowl.

5. Place work bowl cover on work bowl, with

the feed tube just to the right of center. Turn

clockwise to lock onto work bowl.

6. Align pusher with the feed tube opening on

the work bowl cover and slide down to the

bottom.

7. You are now ready to operate the machine.

Slicing, Grating, French fry, and Reversible Shredding Discs

1. Place the work bowl on top of the base,

with the work bowl handle just to the right

of center. Turn the work bowl clockwise to

lock it onto the housing base.

2. Choose desired disc.

3. Insert stem adapter.

4. Carefully place disc over stem adapter, with

the side being used facing up.

5. Place work bowl cover onto work bowl, with

the feed tube just to the right of center. Turn

clockwise to lock onto work bowl.

6. Align pusher with the feed tube opening on

the work bowl cover and slide down to the

bottom.

7. Plug in the housing base.

8. You are now ready to operate the machine.

Mini Food Bowl

1. Place the work bowl on top of the base,

with the work bowl handle just to the right of

center. Turn the work bowl clockwise to lock

it onto the housing base.

2. Insert stem adapter.

3. Carefully place mini-bowl over the stem

adapter and turn until it locks into place.

4. Carefully place the mini s-blade over the

stem adapter. Blade should rest on the

bottom of the mini-bowl.

5. Add desired ingredients to work bowl.

6. Place work bowl cover on work bowl, with

the feed tube just to the right of center. Turn

clockwise to lock onto work bowl.

7. Align pusher with the feed tube opening on

the work bowl cover and slide down to the

bottom.

8. You are now ready to operate the machine.

Recipe: Honey with Almond

• 400g honey (direct from fridge)

• 300g almond

• 15 sec (high speed)

Recommended Maximum Work Bowl Capacity

Food Capacity

Sliced or shredded fruit, vegetable or cheese 10 cups

Chopped fruit, vegetable or cheese 4 cups

Pureed fruit of vegetable 3 cups cooked: 1 ½ cups pureed

&KRSSHGRUSXUHHGPHDW¿VKRUVHDIRRG 1 ½ pounds

7KLQOLTXLGHJGUHVVLQJVVRXSVHFW 7 cups

Cake batter 8 inch cheesecake batter; 1 box (15.25 oz) cake mix

Cookie dough 2 ½ dozen (based on average chocolate chip cookie recipe)

White bread/pizza dough

FXSVDOOSXUSRVHRUEUHDGÀRXU

Nuts or nut butter 3 cups

10 49-9000012 Rev. 3

Controls

Functions

High and Low Buttons

The High and Low controls are buttons that

DOORZWKHPDFKLQHWRUXQXQWLO2ႇLVVHOHFWHG

1. Properly assemble and engage the

machine.

2. Add ingredients to the work bowl, either

through the feed tube or directly into the bowl.

3. Turn knob to the High or Low setting.

7XUQNQREWRXSULJKW2ႇSRVLWLRQZKHQ

¿QLVKHGWRWXUQRႇWKHPDFKLQH

Pulse Button

The Pulse is a setting that allows the machine

to run only while it is being engaged. This

capability provides more accurate control of

WKHGXUDWLRQDQGIUHTXHQF\RISURFHVVLQJ

8QOHVVRWKHUZLVHVSHFL¿HGDSXOVHVKRXOGEH

about one second. With the machine properly

assembled and engaged, and ingredients

in the work bowl, turn the knob to the Pulse

setting repeatedly as needed.

Using the Chopping/Mixing/Dough

Blade Chopping

• For raw ingredients: Peel, core and/or remove

seeds and pits. Food should be cut into even,

½- to 1-inch pieces. Foods cut into same size

pieces produce the most even results.

• Pulse food in 1-second increments to chop.

)RUWKH¿QHVWFKRSSUHVV+LJKRU/RZWRUXQ

the machine continuously. Watch ingredients

closely to achieve desired consistency and

scrape the work bowl as necessary. Low

speed is recommended for making doughs

and batters. High speed is recommended for

most other chopping, processing and slicing/

shredding tasks.

Puréeing

• To purée fresh fruits or cooked fruits/

vegetables: Ingredients should be cut into

1-inch pieces; a smooth purée is best achieved

ZKHQDOOWKHSLHFHVDUHHTXDOLQVL]H3XOVH

to initially chop and then process High or Low

until food is puréed; scrape the work bowl as

necessary. Do not use this method to purée

cooked white potatoes as the mixture can

become too gummy to process.

• To purée solids for a soup or sauce: Strain the

VROLGVIURPWKHOLTXLGDQGSURFHVVWKHVROLGV

DORQH$GGFRRNLQJOLTXLGDQGSURFHVVDV

needed.

Using the Reversible Shredding/

Slicing Discs

• The slicing disc makes whole slices. It slices

fruits and vegetables, cooked meat and

semifrozen raw meat. The shredding disc shreds

PRVW¿UPDQGKDUGFKHHVHV,WDOVRVKUHGV

vegetables like potatoes, carrots and zucchini.

• Always pack food in the feed tube evenly for

slicing and shredding. The food will dictate

the amount of pressure: Use light pressure

for soft foods, medium pressure for medium

IRRGVDQG¿UPSUHVVXUHIRUKDUGHUIRRGV

Always process with even pressure.

• For round fruits or vegetables: Remove a

thick slice on the bottom of the food so that it

sits upright in the feed tube. If food does not

¿WLQWKHIHHGWXEHFXWLQKDOIRUTXDUWHUWR¿W

Process with even pressure.

• For small ingredients like mushrooms,

radishes or strawberries: Trim the ends so

the food sits upright in the feed tube.

• When slicing or shredding cheese, be sure

that the cheese is well chilled.

• To shred leafy vegetables like lettuce or

spinach: Roll leaves together and stand

them up in feed tube. Process with even

pressure.

NOTE: Always use the pusher when slicing or

shredding. Never put your hands in the feed

tube while unit is running.

CARE AND CLEANING

49-9000012 Rev. 3 11

CONTROLS / FUNCTIONS

Care and Cleaning

• Keep the blade and discs out of the reach of

children.

• All parts except the housing base are

dishwasher safe, and we recommend

washing them in the dishwasher on

the top rack only. Due to intense water

heat, washing the work bowl, cover and

accessories on the bottom rack may cause

damage over time. Insert the cover with

the feed tube facing up to ensure proper

cleaning. Insert the work bowl and pusher

upside down for drainage. Remember to

unload the dishwasher carefully wherever

you have placed sharp blades and discs.

• To simplify cleaning, rinse the work bowl,

cover, pusher and blade or disc immediately

after use so food won’t dry on them. Be

sure to position the pusher upside down

for drainage. If food lodges in the pusher,

remove it by running water through it, or

use a bottle brush. Be sure to rinse out the

underside of the removeable stem to prevent

any food lodging there.

• If you wash the blade and discs by hand,

do it carefully. Avoid leaving them in soapy

water where they may disappear from sight.

7RFOHDQWKHPHWDOEODGH¿OOWKHZRUNERZO

with soapy water, hold the blade by its plastic

center and move it rapidly up and down on

the center shaft of the bowl. Use of a spray

DWWDFKPHQWLVDOVRHႇHFWLYH,IQHFHVVDU\

use a brush.

• The work bowl is made of SAN plastic. It

should not be placed in a microwave oven.

• The housing base may be wiped clean with a

soapy, nonabrasive material. Be sure to dry

it thoroughly.

• If the feet leave spots on the counter, spray

them with a spot remover and wipe with a

damp sponge.

• If any trace of the spot remains, repeat the

procedure and wipe the area with a damp

sponge and nonabrasive cleaning powder.

IMPORTANT: Never store any blade or disc

on the motor shaft. No blade or disc should

be placed on the shaft except when the

processor is about to be used.

MAINTENANCE: Any other servicing should

be performed by an authorized service

representative.

CAUTION

FOR YOUR

SAFETY

• Like all powerful electrical appliances a

food processor should be handled with

care. Follow these guidelines to protect

yourself and your family from misuse that

could cause injury.

• Handle and store metal blade and discs

carefully. Their cutting edges are very

sharp.

• Never put blade or discs on the motor

shaft until the work bowl is locked in place.

• Always be sure that the blade or disc is

down on the motor shaft as far as it will go.

• Always insert the metal blade in the work

bowl before putting ingredients in bowl.

• When slicing or shredding food, always

XVHWKHSXVKHU1HYHUSXW\RXU¿QJHUVRU

spatula into feed tube.

• Always wait for the blade or disc to stop

spinning before you remove the pusher

assembly or cover from the work bowl.

• Always unplug the unit before removing

IRRGFOHDQLQJRUSXWWLQJRQRUWDNLQJRႇ

parts.

• Always remove work bowl from base of

machine before you remove the chopping/

mixing/dough blade.

• Be careful to prevent the chopping blade

from falling out of the work bowl when

emptying the bowl. Remove it before tilting

the work bowl.

12 49-9000012 Rev. 3

Troubleshooting

Technical Data

The motor in your food processor operates on a standard line operating current. The

DSSURSULDWHYROWDJHDQGIUHTXHQF\IRU\RXUPDFKLQHDUHVKRZQRQDODEHORQWKHERWWRPRI

the base. An automatic, temperature-controlled circuit breaker in the motor ensures complete

protection against motor burnout. If the processor runs for an exceptionally long time when

chopping, mixing or kneading a thick or heavy mixture in successive batches, the motor may

RYHUKHDW,IWKLVKDSSHQVWKHSURFHVVRUZLOOVWRS7XUQLWRႇDQGZDLWIRUWKHPRWRUWRFRRO

before proceeding. It will usually cool within 10 minutes. In extreme cases, it could take an

hour. Safety switches prevent the machine from operating when the work bowl or the cover

LVQRWORFNHGLQWRSRVLWLRQ7KHPRWRUVWRSVZLWKLQVHFRQGVZKHQWKHPRWRULVWXUQHGRႇDQG

when the pusher assembly is removed, a fast-stop circuit also enables the motor to stop

within seconds.

TROUBLESHOOTING

49-9000012 Rev. 3 13

TROUBLESHOOTING

Troubleshooting

Problem Solution

Food Processing

The food is unevenly

processed.

The ingredients should be cut evenly into ½- to 1-inch pieces before processing.

Process in batches to avoid overloading.

Slices are uneven or

slanted.

Place evenly cut food, cut side down, into the feed tube.

Apply even pressure on the pusher.

Food falls over in

feed tube.

Feed tube should be packed full for best results.

Some food remains

on top of the disc.

It is normal for small pieces to remain; cut remaining bits by hand and add to

processed ingredients.

Cheese is not

shredding well.

Cheese should be processed immediately after being removed from the

refrigerator. Soft cheese like mozzarella must be placed in the freezer for 30

minutes prior to processing to ensure it is firm enough for shredding.

Dough Kneading

Motor slows down Amount of dough may exceed maximum capacity of your food processor. Remove

half and process in two batches.

Dough may be too wet (see number 8). If motor speeds up, continue processing.

If not, add more flour, 1 tablespoon at a time, until the motor speeds up. Process

until dough cleans the sides of the work bowl.

Blade does not

incorporate

ingredients.

$OZD\VVWDUWWKHIRRGSURFHVVRUEHIRUHDGGLQJOLTXLG$GGOLTXLGLQDVORZVWHDG\

stream, or through the drizzle hole in the pusher, allowing the dry ingredients to

DEVRUELW,IWRRPXFKOLTXLGLVDGGHGZDLWXQWLOLQJUHGLHQWVLQWKHZRUNERZOKDYH

PL[HGWKHQDGGUHPDLQLQJOLTXLGVORZO\GRQRWWXUQRIIWKHPDFKLQH3RXUOLTXLG

RQWRGRXJKDVLWSDVVHVXQGHUIHHGWXEHRSHQLQJGRQRWSRXUOLTXLGGLUHFWO\RQWR

bottom of the work bowl.

Blade rises in work

bowl.

Excessively sticky dough can cause blade to rise. Carefully reinsert blade and

immediately add 2 tablespoons of flour through feed tube while machine is running.

Dough doesn’t clean

inside of the work

bowl.

Amount of dough may exceed maximum capacity of your food processor. Remove

half and process in two batches.

Dough may be too dry.

Dough may be too wet.

Nub of dough forms

on top of blade and

does not become

uniformly kneaded.

Stop machine, carefully remove dough, divide it into 3 pieces and redistribute

them evenly in the work bowl.

Dough feels tough

after kneading.

Divide dough into 2 or 3 pieces and redistribute evenly in bowl. Process 10

seconds or until uniformly soft and pliable.

Dough is too dry. While machine is running, add water, 1 tablespoon at a time, until dough cleans

the inside of the bowl.

Dough is too wet. While machine is running, add flour, 1 tablespoon at a time, until dough cleans

the inside of the bowl.

Technical

The motor does not

start.

There is a safety interlock to prevent the motor from starting if it is not properly

assembled. Make sure the work bowl and work bowl cover are securely locked

into position.

If the motor still will not start, check the power cord and outlet.

The food processor

shuts off during

operation.

The cover may have become unlocked; check to make sure it is securely in

position.

A safety protector in the motor prevents the motor from overheating, which

is caused by excessive strain. Press the Off control button and wait 20 to 30

minutes to allow the food processor to cool off before resuming.

The motor slowed

down during

operation.

7KLVLVQRUPDODVVRPHKHDYLHUORDGVHJVOLFLQJVKUHGGLQJFKHHVHPD\UHTXLUHWKH

motor to work harder. Simply reposition the food in the feed tube and try again.

The maximum load capacity may have been exceeded. Remove some of the

ingredients and continue processing.

The food processor

vibrated/moved

around countertop

during processing.

Make sure the rubber feet at the bottom of the unit are clean and dry. Also make

sure that the maximum load capacity is not being exceeded.

7KLVLVQRUPDODVVRPHKHDYLHUORDGVHJVOLFLQJVKUHGGLQJFKHHVHPD\UHTXLUH

the motor to work harder.

Save time and money! Review the charts on the following pages first and you may not need

to call for service.

14 49-9000012 Rev. 3

Notes

NOTES

49-9000012 Rev. 3 15

Ŷ Service trips to your home.

Ŷ Improper installation, delivery or

maintenance.

Ŷ Failure of the product if it is abused,

misused, or used for other than the

intended purpose or used commercially.

Ŷ Replacement of house fuses or resetting of

circuit breakers.

Ŷ Damage caused after delivery.

Ŷ Damage to the product caused by

accident, fire, floods or acts of God.

Ŷ ,QFLGHQWDORUFRQVHTXHQWLDOGDPDJHFDXVHG

by possible defects with this appliance.

Ŷ Labor and other charges to install and/or

remove the product

What GE Appliances Will Not Cover:

For the Period of: GE Appliances Covers

One Year

From the date of the

original purchase

If the food processor fails due to a defect in materials or workmanship,

during the limited one-year warranty, GE Appliances will either repair

your product, replace your product with a new or remanufactured

product, or refund the purchase price of the product at GE Appliances

sole discretion.

Staple your receipt here. Proof of the original purchase date is

needed to obtain service under the warranty.

LIMITED WARRANTY

GE Appliances Limited Warranty

EXCLUSION OF IMPLIED WARRANTIES

Your sole and exclusive remedies are product exchange or refund as provided in

this Limited Warranty. Any implied warranties, including the implied warranties of

merchantability or fitness for a particular purpose, are limited to one year or the shortest

period allowed by law.

For US Customers: This limited warranty is extended to the original purchaser for products

purchased for home use within the USA. In Alaska and Hawaii, the limited warranty does not

include the costs of shipping units.

6RPHVWDWHVGRQRWDOORZWKHH[FOXVLRQRUOLPLWDWLRQRILQFLGHQWDORUFRQVHTXHQWLDOGDPDJHV

This limited warranty gives you specific legal rights, and you may also have other rights

which vary from state to state. To know what your legal rights are, consult your local or state

consumer affairs office or your state’s Attorney General.

Warrantor: GE Appliances, a Haier company

Louisville, KY 40225

For Customers in Canada: This limited warranty is extended to the original purchaser

and any succeeding owner for products purchased in Canada for home use within Canada.

In-home warrant service will be provided in areas where it is available and deemed

reasonable by Mabe to provide. For extended warranty information, visit geappliances.ca/

purchase-extended-warranty

Warrantor Canada: MC Commercial, Burlington, Ontario, L7R 5B6

If your appliance fails to operate properly while in use under normal household conditions within

the warranty period, visit geappliances.com/contact for product care/maintenance self-help.

To initiate a warranty claim, please visit geappliances.com/contact, or call 1-800-GECARES.

Please have your model number and serial number available. Return and packing instruction

information will be provided at that time.

16 49-9000012 Rev. 3

Consumer Support

CONSUMER SUPPORT

Service and Registration

Register your new appliance on-line at your convenience! Timely product registration will

allow for enhanced communication and prompt service under the terms of your warranty,

should the need arise.

Register your appliance at GEAppliances.com/register.

In Canada, service.geappliances.ca/servicio/en_CA/

Contact Us

If you are not satisfied with the service you receive from GE Appliances, contact us on our

Website with all the details including your phone number, or write to:

In the US: General Manager, Customer Relations | GE Appliances, Appliance Park |

Louisville, KY 40225

GEAppliances.com/contact

In Canada: Director, Consumer Relations, MC Commercial Inc. | Suite 310, 1 Factory Lane |

Moncton, N.B. E1C 9M3

GEAppliances.ca/en/contact-us

Inscrivez les numéros de modèle

et de série ici :

No de modèle __________________

No de série ____________________

Vous trouverez ces numéros sur

l’étiquette à l’arrière de l’appareil.

GE est une marque de commerce de General Electric Company. Fabriqué sous licence de marque.

MANUEL

D’UTILISATION

ROBOT CULINAIRE

49-9000012 Rev. 3 04-21 GEA

ROBOT CULINAIRE ............3

PIÈCES INCLUSES .............6

ACCESSOIRES ................8

COMMENT DÉMARRER .........9

COMMANDES ................ 10

FONCTIONS .................. 10

ENTRETIEN ET NETTOYAGE ....11

DÉPANNAGE ..................12

GARANTIE LIMITÉE ...........15

SOUTIEN AU CONSOMMATEUR .16

G8P0AASSPSS

G8P1AASSPSS

G8PKAASSRSS

2 49-9000012 Rev. 3

NOUS VOUS REMERCIONS D’INTÉGRER GE

APPLIANCES À VOTRE DEMEURE.

Que vous ayez grandi avec des électroménagers GE ou qu’il

s’agisse de votre première acquisition, nous sommes heureux de

vous accueillir dans notre famille.

Nous sommes fiers du savoir-faire, de l’innovation et du design

qui constituent chaque électroménager GE, et nous pensons que

vous le serez aussi. Nous vous rappelons que l’enregistrement

de votre électroménager vous assure de recevoir des

renseignements importants sur le produit et la garantie lorsque

vous en avez besoin.

49-9000012 Rev. 3 3

AVERTISSEMENT

LES ARÊTES DES OUTILS DE COUPE SONT TRÈS

COUPANTS.

MESURES DE SÉCURITÉ

IMPORTANTES

Observez toujours les présentes consignes de sécurité lorsque vous utilisez cet

électroménager.

Préparation

1. Lisez toutes les instructions.

2. La lame et les disques sont coupants. Manipulez-les avec prudence.

3. Mettez l’appareil hors tension (OFF), puis débranchez-le de la prise électrique lorsqu’il n’est

pas utilisé, avant de monter ou démonter les pièces et avant le nettoyage. Pour débrancher

l’appareil, agrippez la fiche du cordon et tirez. Ne tirez jamais par le cordon en tant que tel.

4. Ne l'utilisez pas à l'extérieur.

5. Ne laissez pas le cordon pendre par-dessus le bord de la table ou du comptoir.

6. Ne laissez pas le cordon toucher une surface chaude, y compris la cuisinière.

7. N’utilisez pas l’appareil s’il a été échappé, s’il est défectueux ou endommagé d’une manière

quelconque, ou encore si le cordon ou la fiche sont endommagés. Contactez le fabricant via

le site Web inscrit dans la section Communiquez avec nous pour des renseignements sur

l’inspection, la réparation ou le réglage.

Fonctionnement

1. Gardez les mains ainsi que les spatules et autres ustensiles à l’écart des lames ou des disques

mobiles pendant le traitement des aliments afin de réduire le risque de blessure grave ou de

dommage au robot culinaire. On peut utiliser un racloir en plastique mais seulement lorsque le

robot est arrêté.

2. Évitez de toucher aux pièces mobiles. Ne poussez jamais les aliments avec la main lorsque

vous tranchez ou râpez. Utilisez toujours le poussoir.

3. Assurez-vous que le moteur s’est complètement arrêté avant de retirer le couvercle. (Si

l’appareil ne s’arrête pas en moins de 4 secondes après le retrait du couvercle du bol,

composez le 1.866.907.6718 pour de l’assistance. N’utilisez pas l’appareil.)

4. Ne rangez jamais une lame ou un disque quelconque sur l’arbre du moteur. Pour réduire le

risque de blessure, aucune lame ni disque ne doit être placé sur l’arbre, sauf si le bol est

correctement verrouillé en place et que le robot est utilisé. Rangez les lames et les disques

comme vous le feriez pour les couteaux coupants, hors de portée des enfants.

5. Assurez-vous que le couvercle et le tube d’alimentation sont bien verrouillés en place avant de

démarrer le robot culinaire.

6. Ne tentez jamais de contourner ou de modifier le mécanisme de verrouillage du couvercle.

7. Ne remplissez pas le bol au-dessus de la marque de ligne de remplissage maximale (ou

capacité nominale) afin de prévenir le risque de blessure suivant l’endommagement du

couvercle ou du bol.

Nettoyage

Ŷ3RXUUpGXLUHOHULVTXHGHFKRFpOHFWULTXHQHSODFH]SDVODEDVHGDQVOHDXRXXQDXWUHOLTXLGH

quelconque.

CONSIGNES DE SÉCURITÉ

CONSIGNES

DE SÉCURITÉ IMPORTANTES

LISEZ TOUTES LES INSTRUCTIONS AVANT D'UTILISER L'APPAREIL

LISEZ ET CONSERVEZ CES

INSTRUCTIONS

4 49-9000012 Rev. 3

CONSIGNES DE SÉCURITÉ

CONSIGNES

DE SÉCURITÉ IMPORTANTES

LISEZ TOUTES LES INSTRUCTIONS AVANT D'UTILISER L'APPAREIL

AVERTISSEMENT

LES ARÊTES DES OUTILS DE COUPE SONT TRÈS

COUPANTS.

MESURES DE SÉCURITÉ

IMPORTANTES

Généralités

1. Cet appareil n’est pas destiné à être utilisé par des personnes (y compris les enfants)

dont les capacités physiques, sensorielles ou mentales sont réduites ou l’expérience et

les connaissances insuffisantes, sauf si elles sont étroitement surveillées et instruites sur

l’utilisation de l’appareil par une personne responsable de leur sécurité. Une surveillance

étroite est requise lorsque cet appareil est utilisé par des enfants ou à proximité de

ceux-ci. Les enfants doivent être surveillés afin de s’assurer qu’ils ne jouent pas avec

l’appareil.

2. N’utilisez pas cet appareil ni aucune autre appareil motorisé, si vous êtes sous l’influence

de l’alcool ou d’autres substances qui affectent votre temps de réaction ou votre

perception.

3. Ce robot culinaire est destiné à un usage domestique seulement. Utilisez-le seulement

pour la préparation des aliments selon les descriptions des recettes et des instructions

de ce manuel. N’utilisez pas cet appareil à d'autres fins que celle prévue.

4. L’utilisation d’accessoires qui ne sont pas recommandés ou vendus par le fabricant peut

présenter un risque d’incendie, de choc électrique, de blessure ou d’endommagement de

votre robot culinaire.

5. Afin de prévenir un mauvais fonctionnement du commutateur du bol de préparation, ne

rangez jamais le robot avec le couvercle dans la position verrouillée.

6. La puissance nominale maximale de 550 watts est basée sur l’utilisation de la lame

à hacher dans le bol du robot culinaire étant donné que cette activité est la plus

gourmande en énergie. Les autres accessoires recommandés peuvent prélever

beaucoup moins de puissance.

7. Ne faites pas fonctionner votre robot dans un garage ou sous une armoire murale.

Si l’appareil est rangé dans un garage, débranchez-le toujours de la prise électrique.

Ne pas le faire pose un risque d’incendie, en particulier si l’appareil touche un mur du

garage ou si la porte touche à l’appareil en fermant.

LISEZ ET CONSERVEZ CES

INSTRUCTIONS

La page est en cours de chargement...

GE Retail Parts G8PKAASSRSS Manuel utilisateur

Ce manuel convient également à

GE Retail Parts G8PKAASSRSS Manuel utilisateur

dans d''autres langues

Autres documents