Datalogic Formula F732 WIZARD Manuel utilisateur

F732 WIZARD™

User’s Manual

F732 WIZARD™

User’s Manual

F732 WIZARD™

USER'S MANUAL

DATALOGIC S.p.A.

Via Candini 2

40012 - Lippo di Calderara di Reno

Bologna - Italy

Formula 732 Wizard™ - User's Manual

Ed.: 06/01

Datalogic reserves the right to make modifications and improvements without

prior notification. Products names mentioned herein are for identification

purposes only and may be trademarks and or registered trademarks of their

respective companies.

820042112 (Rev. B)

iii

CONTENTS

1 GENERAL INFORMATION................................... 1

1.1 F732 WIZARD™ Terminal Description................. 1

1.2 Downloading EasyGen™ Demo............................ 3

1.3 Application Development Programs...................... 3

1.4 Purpose of the Manual.......................................... 4

1.5 Contents of Packing.............................................. 5

1.6 Terminal Identification........................................... 6

2 SAFETY REGULATIONS..................................... 7

2.1 General Safety Rules............................................ 7

2.2 Laser Safety.......................................................... 8

2.3 FCC Compliance - Information for the User........ 13

3 CONNECTION.................................................... 14

3.1 Cradle.................................................................. 14

3.2 Connection to the Host Computer....................... 16

3.2.1 RS-232 Connection............................................. 16

3.3 Connection Cables.............................................. 18

4 USE AND OPERATION...................................... 19

4.1 Loading Application Programs............................ 20

4.2 Bar Code Scanning............................................. 20

4.3 Description of Keys............................................. 21

4.4 Downloading Data to Host .................................. 24

5 MAINTENANCE.................................................. 25

5.1 Charging the Batteries ........................................ 25

5.2 Replacing the Batteries....................................... 27

5.3 Cleaning the Terminal......................................... 28

6 TROUBLESHOOTING........................................ 29

7 TECHNICAL FEATURES ................................... 31

A F732 PRODUCTS AND ACCESSORIES ........... 34

iv

GENERAL INFORMATION

1

Ed.: 06/01

1

1 GENERAL INFORMATION

1.1 F732 WIZARD™ TERMINAL DESCRIPTION

For vast majority of small businesses and retailers, the

complete Formula Wizard™ package represents the

simplest and most cost-effective solution for entering the

world of bar code data acquisition.

The Formula 732 Wizard™ (abbreviated in this manual to

F732) portable terminal with its integrated laser scanner is

at the heart of the Formula Wizard™ solution. Fast and

reliable in reading the most common symbologies, it comes

equipped with a handy 25-key alphanumeric keyboard and

has a large display with icons. Data transfer to the PC takes

place by simply placing the terminal into the Formula 952

Transceiver/Charger, which is equipped with a RS232 serial

port, and using Systools™ 2001 - an effective software

utility for transferring data to standard ASCII files.

By using the EasyGen™ software package, developers can

quickly build personalized applications according to the

required contexts by easily creating programs of average

complexity in a Windows environment.

F732 WIZARD™

1

2

Ed.: 06/01

The EasyGen™ Demo Version with five ready-to-use

example applications can be downloaded from the

Datalogic web site free of charge. They cover the most

common operating requirements in data collection, assisted

sales, inventory and goods picking, thus making the

Formula Wizard™ solution immediately productive.

The EasyGen™ package also includes Systools™ 2001

and OLE for Formula, the ActiveX software module that

allows data to be integrated into applications such as Visual

Basic, Excel, Access, Delphi, etc.

Furthermore, the Formula 732 terminals are fully

programmable in C language using DS for Formula, thus

solving even the most complex application needs.

A

B

C

D

EE

Key:

A) Laser beam output window

B) Two color LED

C) Reset key (shielded)

D) Cradle communications window

E) Contacts for battery recharging

GENERAL INFORMATION

1

Ed.: 06/01

3

The F732 terminal has an LCD graphic display of 16

characters by 4 lines plus a line in the upper part of the

display for the programmable icons:

FORMULA 732 WIZARD

POCKET LASER TERM

DATALOGIC S. P. A.

4 LINESx16 CHARS

Time

The battery charge status

The icons which can be

controlled by the

application program

1.2 DOWNLOADING EASYGEN™ DEMO

By completing the electronic form at our web site,

http:\\www.datalogic.com\pdc\easygen_demo.htm, you can

download for free EasyGen™ Demo Software package

containing the following items:

• EasyGen™ Demo Version (user-friendly and highly

productive application generator)

• Systools™ 2001 (efficient utility for data exchange with

the F732 terminal)

• OLE for Formula (useful ActiveX software module for

easy integration of Windows applications)

• The most common application examples (data

collection, inventory, goods picking, assisted sales)

available in 5 languages (English, French, German,

Italian, Spanish)

• The complete documentation in PDF format.

1.3 APPLICATION DEVELOPMENT PROGRAMS

"C" ANSI standard

The Formula 732 terminal is fully programmable in C

language, thus solving even the most complex application

needs.

• Development System for Formula Basic Line order

nr. 94A104860

• CA51 "C" Compiler KIT order nr. 94A104890

F732 WIZARD™

1

4

Ed.: 06/01

EasyGen™ Application Generator

By using the EasyGen™ software, developers can easily

and quickly build personalized applications of average

complexity in a Windows environment.

• EasyGen™ (Easy Application Generator Package)*

order nr. 94A104850.

*

32-bit software for Microsoft Windows 95/98/2000/ME and NT

(PC Pentium processor, 16MB of RAM, 30MB free hard disk

space required)

1.4 PURPOSE OF THE MANUAL

The information contained in this manual is divided in two

parts:

− For the everyday user:

Chapters 1, 2, 4 and 7:

supply general information, safety information, the

F732 terminal operating instructions and technical

specifications.

− For the person in charge of the management of the

terminals and for those who are familiar with the

Microsoft Windows 95/98/2000/ME and NT operating

system and possess basic programming skills:

Chapters 3, 4, 5, 6, and 7:

supply instructions for the connection of F732 terminals

to the host computer, and battery substitution.

GENERAL INFORMATION

1

Ed.: 06/01

5

1.5 CONTENTS OF PACKING

The F732 terminal package includes:

− nr. 1 F732 terminal complete with batteries;

− nr. 1 cradle F952 with power supply;

− nr. 1 cable 90A054000 for serial connection;

− nr. 1 user's manual

− nr. 1 test chart

CAUTION

Remove all components from their

packing and check that they are in good

condition and that they correspond to the

shipment documents.

Keep the packing and boxes in case it is

necessary to send the terminal back for

technical assistance. Damage caused by

improper packing is not covered by the

warranty

NOTE

Rechargeable battery packs (NiCd) are not

initially charged.

Therefore the first operation to perform is to

charge them in the appropriate cradle (see

par. 3.2.1 and par. 5.1).

F732 WIZARD™

1

6

Ed.: 06/01

1.6 TERMINAL IDENTIFICATION

SER 123456789

COD 941404020

MOD F732/B 128K

Dat alo gic SpA 00/0 1

CAUTION

SER 123456789

COD 941404020

MOD F732/B 128K

Datalogic SpA 00/01

Serial number

Production Code

Model identificatio

n

SAFETY REGULATIONS

2

Ed.: 06/01

7

2 SAFETY REGULATIONS

NOTE

Read this manual carefully before

performing any type of connection or repair

on the F732 terminal.

The user is responsible for any damages

caused by incorrect use of the equipment or

by inobservance of the indication supplied

in this manual.

2.1 GENERAL SAFETY RULES

Use only the components supplied by the manufacturer for

the specific F732 terminal being used. The use of cradles

other than those supplied with the F732 terminal or

indicated in the list in the appendix could cause serious

damage to the F732 terminal.

Do not attempt to disassemble the F732 terminal, as it does

not contain parts that can be repaired by the user. Any

tampering will invalidate the warranty.

When replacing the batteries or at the end of the operative

life of the F732 terminal, disposal must be performed in

compliance with the laws in force.

Do not submerge the F732 terminal in liquid products.

F732 WIZARD™

2

8

Ed.: 06/01

2.2 LASER SAFETY

The laser light is visible to the human eye and is emitted

from the window indicated in the figure.

SER 123456789

COD 941404020

MOD F732/B 128K

Datalogic SpA 00/01

CAUTION

AVOID EXPOSURE-LASER LIGHT

IS EMITTED FROM THIS APERTURE

680 nm LASER

1.0 MILLIWATT MAX OUTPUT

CLASS II LASER PRODUCT

Laser beam output window

IDFE

LA LUCE

LASER È

VISIBILE

ALL'OCCHIO

UMANO E

VIENE

EMESSA

DALLA

FINESTRA

INDICATA

NELLA

FIGURA.

DIE LASER-

STRAHLUNG IST

FÜR DAS

MENSCHLICHE

AUGE SICHTBAR

UND WIRD AM

STRAHLAUS-

TRITTSFENTSTER

AUSGESENDET

(SIEHE BILD)

LE RAYON

LASER EST

VISIBLE À

L'OEIL MU ET IL

EST ÉMIS PAR

LA FENÊTRE

DÉSIGNÉE

SUR

L'ILLUSTRATIO

N DANS LA

FIGURE

A LUZ

LÁSER ES

VISIBLE AL

OJO

HUMANO Y

ES EMITIDA

POR LA

VENTANA

INDICADA

EN LA

FIGURA.

SAFETY REGULATIONS

2

Ed.: 06/01

9

IDFE

LUCE LASER

NON FISSARE

IL FASCIO

APPARECCHIO

LASER DI

CLASSE 2

MASSIMA

POTENZA

D'USCITA:

LUNGHEZZA

D'ONDA

EMESSA:

CONFORME A

EN 60825

(1993)

LASERSTRAHLUNG

NICHT IN DEN

STRAHL BLICKEN

PRODUKT DER

LASERKLASSE 2

MAXIMALE

AUSGANGSLEISTU

NG:

WELLENLÄGE:

ENTSPR. EN 60825

(1993)

RAYON LASER

EVITER DE

REGARDER LE

RAYON

APPAREIL

LASER DE

CLASSE 2

PUISSANCE DE

SORTIE:

LONGUER

D'ONDE EMISE:

CONFORME A

EN 60825

(1993)

RAYO

LÁSER NO

MIRAR FIJO

EL RAYO

APARATO

LÁSER DE

CLASE 2

MÁXIMA

POTENCIA

DE SALIDA:

LONGITUD

DE ONDA

EMITIDA:

CONFORME

A EN 60825

(1993)

ENGLISH

The following information is provided to comply with the

rules imposed by international authorities and refers to the

correct use of your terminal.

STANDARD LASER SAFETY REGULATIONS

This product conforms to the applicable requirements of

both CDRH 21 CFR 1040 and EN 60825 at the date of

manufacture.

For installation, use and maintenance, it is not necessary to

open the device.

CAUTION

Use of controls or adjustments or

performance of procedures other than

those specified herein may result in

exposure to hazardous visible laser light.

The product utilizes a low-power laser diode. Although

staring directly at the laser beam momentarily causes no

known biological damage, avoid staring at the beam as one

would with any very strong light source, such as the sun.

Avoid that the laser beam hits the eye of an observer, even

through reflective surfaces such as mirrors, etc.

F732 WIZARD™

2

10

Ed.: 06/01

ITALIANO

Le seguenti informazioni vengono fornite dietro direttive

delle autorità internazionali e si riferiscono all’uso corretto

del terminale.

NORMATIVE STANDARD PER LA SICUREZZA LASER

Questo prodotto risulta conforme alle normative vigenti sulla

sicurezza laser alla data di produzione: CDRH 21 CFR

1040 e EN 60825.

Non si rende mai necessario aprire l’appa-recchio per

motivi di installazione, utilizzo o manutenzione.

ATTENZIONE

L'utilizzo di procedure o regolazioni

differenti da quelle descritte nella

documentazione può provocare

un'esposizione pericolosa a luce laser

visibile.

Il prodotto utilizza un diodo laser a bassa potenza. Sebbene

non siano noti danni riportati dall’occhio umano in seguito

ad una esposizione di breve durata, evitare di fissare il

raggio laser così come si eviterebbe qualsiasi altra

sorgente di luminosità intensa, ad esempio il sole. Evitare

inoltre di dirigere il raggio laser negli occhi di un

osservatore, anche attraverso superfici riflettenti come gli

specchi.

DEUTSCH

Die folgenden Informationen stimmen mit den

Sicherheitshinweisen überein, die von internationalen

Behörden auferlegt wurden, und sie beziehen sich auf den

korrekten Gebrauch vom Terminal.

NORM FÜR DIE LASERSICHERHEIT

Dies Produkt entspricht am Tag der Herstellung den

gültigen EN 60825 und CDRH 21 CFR 1040 Normen für die

Lasersicherheit.

Es ist nicht notwendig, das Gerät wegen Betrieb oder

Installations-, und Wartungs-arbeiten zu öffnen.

SAFETY REGULATIONS

2

Ed.: 06/01

11

ACHTUNG

Jegliche Änderungen am Gerät sowie

Vorgehensweisen, die nicht in dieser

Betriebsanleitung beschreiben werden,

können ein gefährliches Laserlicht

verursachen.

Das Produkt benutzt eine Laserdiode. Obwohl zur Zeit

keine Augenschäden von kurzen Einstrahlungen bekannt

sind, sollten Sie es vermeiden für längere Zeit in den

Laserstrahl zu schauen, genauso wenig wie in starke

Lichtquellen (z.B. die Sonne). Vermeiden Sie es, den

Laserstrahl weder gegen die Augen eines Beobachters,

noch gegen reflektierende Oberflächen zu richten.

FRANÇAIS

Les informations suivantes sont fournies selon les règles

fixées par les autorités internationales et se refèrent à une

correcte utilisation du terminal.

NORMES DE SECURITE LASER

Ce produit est conforme aux normes de sécurité laser en

vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN

60825.

Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation,

l’utilisation ou l’entretien.

ATTENTION

L'utilisation de procédures ou réglages

différents de ceux donnés ici peut

entrainer une dangereuse exposition à

lumière laser visible.

Le produit utilise une diode laser. Aucun dommage aux

yeux humains n’a été constaté à la suite d’une exposition

au rayon laser. Eviter de regarder fixement le rayon, comme

toute autre source lumineuse intense telle que le soleil.

Eviter aussi de diriger le rayon vers les yeux d’un

observateur, même à travers des surfaces réfléchissantes

(miroirs, par example).

F732 WIZARD™

2

12

Ed.: 06/01

ESPAÑOL

Las informaciones siguientes son presentadas en

conformidad con las disposiciones de las autoridades

internacionales y se refieren al uso correcto del terminal.

NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER

Este aparato resulta conforme a las normativas vigentes de

seguridad láser a la fecha de producción: CDRH 21 CFR

1040 y EN 60825.

No es necesario abrir el aparato para la instalación, la

utilización o la manutención.

ATENCIÓN

La utilización de procedimientos o

regulaciones diferentes de aquellas

describidas en la documentación puede

causar una exposición peligrosa a la luz

láser visible.

El aparato utiliza un diodo láser a baja potencia. No son

notorios daños a los ojos humanos a consecuencia de una

exposición de corta duración. Eviten de mirar fijo el rayo

láser así como evitarían cualquiera otra fuente de

luminosidad intensa, por ejemplo el sol. Además, eviten de

dirigir el rayo láser hacia los ojos de un observador,

también a través de superficies reflectantes como los

espejos.

SAFETY REGULATIONS

2

Ed.: 06/01

13

2.3 FCC COMPLIANCE - INFORMATION FOR

THE USER

CAUTION

This device complies with PART 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and

(2) this device must accept any

interference which may cause undesired

operation.

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when

the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to

correct the interference at his own expense.

F732 WIZARD™

3

14

Ed.: 06/01

3 CONNECTION

3.1 CRADLE

To make the F732 terminal operative, it is necessary to

insert it in the Formula 952 Transceiver charger cradle

which has previously been connected to the power supply

and to a host computer with an available RS-232 serial line.

La page charge ...

Datalogic Formula F732 WIZARD Manuel utilisateur

Ce manuel convient également à

Datalogic Formula F732 WIZARD Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents