Chicago Electric 98179 Set Up And Operating Instructions Manual

Marque: Chicago Electric

Modèle: 98179

Catégorie: Coupe-bordures

Taper: Set Up And Operating Instructions Manual

MAGNESIUM HEAVY DUTY 3/8”

DRILL

Model

98179

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2008 by Harbor Freight Tools

contained herein may be reproduced in any shape or form without the express written consent of Harbor

Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,

actual product may differ slightly from the product described herein.

For technical questions or replacement parts, please call 1-800-444-3353.

Page 2SKU 98179 For technical questions, please call 1-800-444-3353.

SAVE THIS MANUAL

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning

procedures. Write the product’s serial

number in the back of the manual near the

assembly diagram (or month and year of

purchase if product has no number). Keep

this manual and the receipt in a safe and

dry place for future reference.

IMPORTANT SAFETY

INFORMATION

In this manual, on the labeling,

and all other information provid-

ed with this product:

This is the safety alert

symbol. It is used to alert

you to potential personal

injury hazards. Obey all

safety messages that

follow this symbol to avoid

possible injury or death.

DANGER indicates

a hazardous

situation which, if not

avoided, will result in death or

serious injury.

WARNING

indicates a

hazardous situation which, if

not avoided, could result in

death or serious injury.

CAUTION, used

with the safety

alert symbol, indicates a

hazardous situation which, if

not avoided, could result in

minor or moderate injury.

NOTICE is used to

address practices

not related to personal injury.

CAUTION, without

the safety alert

symbol, is used to address

practices not related to

personal injury.

General Power Tool Safety

Warnings

WARNING Read all safety

warnings and instructions.

Failure to follow the warnings and

instructions may result in electric

shock, re and/or serious injury.

Save all warnings and

instructions for future reference.

The term ″power tool″ in the

warnings refers to your mains-

operated (corded) power tool or

battery-operated (cordless) power

tool.

Work area safety1.

Keep work area clean and well lit. a.

Cluttered or dark areas invite acci-

dents.

Do not operate power tools in b.

explosive atmospheres, such as in

the presence of ammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust or

fumes.

Keep children and bystanders c.

away while operating a power tool.

Distractions can cause you to lose

control.

Electrical safety2.

Power tool plugs must match the a.

outlet. Never modify the plug in

any way. Do not use any adapter

Page 3SKU 98179 For technical questions, please call 1-800-444-3353.

plugs with grounded power tools.

Unmodied plugs and matching out-

lets will reduce risk of electric shock.

Avoid body contact with grounded b.

surfaces such as pipes, radiators,

ranges and refrigerators. There is

an increased risk of electric shock if

your body is grounded.

Do not expose power tools to rain c.

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

Do not abuse the cord. Never use d.

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged

or entangled cords increase the risk

of electric shock.

When operating a power tool out-e.

doors, use an extension cord suit-

able for outdoor use. Use of a cord

suitable for outdoor use reduces the

risk of electric shock.

If operating a power tool in a damp f.

location is unavoidable, use a

Ground Fault Circuit Interrupter

(GFCI) protected supply. Use of

a GFCI reduces the risk of electric

shock.

Personal safety3.

Stay alert, watch what you are do-a.

ing and use common sense when

operating a power tool. Do not use

a power tool while you are tired

or under the inuence of drugs,

alcohol or medication. A moment

of inattention while operating power

tools may result in serious personal

injury.

Use personal protective equip-b.

ment. Always wear eye protection.

Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or

hearing protection used for appropri-

ate conditions will reduce personal

injuries.

Prevent unintentional starting. c.

Ensure the switch is in the off-po-

sition before connecting to power

source and/or battery pack, pick-

ing up or carrying the tool. Carry-

ing power tools with your nger on

the switch or energizing power tools

that have the switch on invites acci-

dents.

Remove any adjusting key or d.

wrench before turning the power

tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

Do not overreach. Keep proper e.

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

Dress properly. Do not wear loose f.

clothing or jewelry. Keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewelry or long hair can be caught in

moving parts.

If devices are provided for the con-g.

nection of dust extraction and col-

lection facilities, ensure these are

connected and properly used. Use

of these devices can reduce dust-

related hazards.

Only use safety equipment that h.

has been approved by an appropri-

ate standards agency. Unapproved

safety equipment may not provide

adequate protection. Eye protection

must be ANSI-approved and breath-

ing protection must be NIOSH-ap-

Page 4SKU 98179 For technical questions, please call 1-800-444-3353.

proved for the specic hazards in the

work area.

Power tool use and care4.

Do not force the power tool. Use a.

the correct power tool for your ap-

plication. The correct power tool will

do the job better and safer at the rate

for which it was designed.

Do not use the power tool if the b.

switch does not turn it on and off.

Any power tool that cannot be con-

trolled with the switch is dangerous

and must be repaired.

Disconnect the plug from the c.

power source and/or the battery

pack from the power tool before

making any adjustments, chang-

ing accessories, or storing power

tools. Such preventive safety mea-

sures reduce the risk of starting the

power tool accidentally.

Store idle power tools out of the d.

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to oper-

ate the power tool. Power tools are

dangerous in the hands of untrained

users.

Maintain power tools. Check for e.

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool’s operation. If dam-

aged, have the power tool repaired

before use. Many accidents are

caused by poorly maintained power

tools.

Keep cutting tools sharp and f.

clean. Properly maintained cutting

tools with sharp cutting edges are

less likely to bind and are easier to

control.

Use the power tool, accessories g.

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed. Use

of the power tool for operations differ-

ent from those intended could result

in a hazardous situation.

Service6.

Have your power tool serviced by a.

a qualied repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

Drill and Impact Drill

Safety Warnings

Wear ear protectors with impact 1.

drills. Exposure to noise can cause

hearing loss.

Use auxiliary handles supplied 2.

with the tool. Loss of control can

cause personal injury.

Hold power tools by insulated grip-3.

ping surfaces when performing an

operation where the cutting tool

may contact hidden wiring or its

own cord. Contact with a ″live″ wire

will make exposed metal parts of the

tool ″live″ and shock the operator.

Maintain labels and nameplates on 4.

the tool. These carry important safety

information. If unreadable or miss-

ing, contact Harbor Freight Tools for a

replacement.

Avoid unintentional starting. Prepare 5.

to begin work before turning on the

tool.

Do not lay the tool down until it has 6.

come to a complete stop. Moving

Page 5SKU 98179 For technical questions, please call 1-800-444-3353.

parts can grab the surface and pull

the tool out of your control.

When using a handheld power tool, 7.



both hands to resist starting torque.

Do not leave the tool unattended 8.

when it is plugged into an electrical

outlet. Turn off the tool, and unplug it

from its electrical outlet before leav-

ing.

This product is not a toy. Keep it out 9.

of reach of children.

People with pacemakers should 10.

consult their physician(s) before use.

-

imity to heart pacemaker could cause

pacemaker interference or pacemak-

er failure. In addition, people with

pacemakers should:





on.



avoid electrical shock.



grounded. Ground Fault Circuit Inter-

rupter (GFCI) should also be imple-

mented – it prevents sustained elec-

trical shock.

Some dust created by power sand-11.

ing, sawing, grinding, drilling, and

other construction activities, contains

chemicals known [to the State of Cali-

fornia] to cause cancer, birth defects

or other reproductive harm. Some

examples of these chemicals are:



-

ment or other masonry products

-

cally treated lumber

Your risk from these exposures var-

ies, depending on how often you do

this type of work. To reduce your

exposure to these chemicals: work in

a well ventilated area, and work with

approved safety equipment, such as

those dust masks that are specially



particles. (California Health & Safety

Code § 25249.5, et seq.)

The warnings, precautions, and in-12.

structions discussed in this instruction

manual cannot cover all possible con-

ditions and situations that may occur.

It must be understood by the operator

that common sense and caution are

factors which cannot be built into this

product, but must be supplied by the

operator.

Vibration Safety

This tool vibrates during use. Re-

peated or long-term exposure to

vibration may cause temporary or

permanent physical injury, particularly

to the hands, arms and shoulders. To

reduce the risk of vibration-related

injury:

Anyone using vibrating tools regu-1.

larly or for an extended period should



then have regular medical check-

ups to ensure medical problems are

not being caused or worsened from

use. Pregnant women or people

who have impaired blood circulation

to the hand, past hand injuries, ner-

vous system disorders, diabetes, or

Raynaud’s Disease should not use

this tool. If you feel any medical or

physical symptoms related to vibra-

tion (such as tingling, numbness, and



advice as soon as possible.

Page 6SKU 98179 For technical questions, please call 1-800-444-3353.

Do not smoke during use. Nico-2.

tine reduces the blood supply to the



of vibration-related injury.

Wear suitable gloves to reduce the 3.

vibration effects on the user.

Use tools with the lowest vibration 4.

when there is a choice between dif-

ferent processes.

Include vibration-free periods each 5.

day of work.

Grip tool as lightly as possible (while 6.



the tool do the work.

To reduce vibration, maintain the tool 7.

as explained in this manual. If any

abnormal vibration occurs, stop use

immediately.

SAVE THESE

INSTRUCTIONS.

GROUNDING

TO PREVENT

ELECTRIC SHOCK

AND DEATH FROM

INCORRECT GROUNDING

WIRE CONNECTION:

Check with a qualied

electrician if you are in doubt

as to whether the outlet is

properly grounded. Do not

modify the power cord plug

provided with the tool. Never

remove the grounding prong

from the plug. Do not use the

tool if the power cord or plug

is damaged. If damaged, have

it repaired by a service facility

before use. If the plug will not

t the outlet, have a proper

outlet installed by a qualied

electrician.

Grounded Tools: Tools with Three

Prong Plugs

Tools marked with “Grounding Re-1.

quired” have a three wire cord and

three prong grounding plug. The

plug must be connected to a properly

grounded outlet. If the tool should

electrically malfunction or break

down, grounding provides a low

resistance path to carry electricity

away from the user, reducing the risk

Page 7SKU 98179 For technical questions, please call 1-800-444-3353.

of electric shock. (See 3-Prong Plug

and Outlet.)

The grounding prong in the plug is 2.

connected through the green wire in-

side the cord to the grounding system

in the tool. The green wire in the cord

must be the only wire connected to

the tool’s grounding system and must

never be attached to an electrically

“live” terminal. (See 3-Prong Plug

and Outlet.)

The tool must be plugged into an 3.

appropriate outlet, properly installed

and grounded in accordance with all

codes and ordinances. The plug and

outlet should look like those in the

preceding illustration. (See 3-Prong

Plug and Outlet.)

Double Insulated Tools: Tools

with Two Prong Plugs

Tools marked “Double Insulated” do 1.

not require grounding. They have

a special double insulation system



and complies with the applicable

-

tories, Inc., the Canadian Standard

Association, and the National Electri-

cal Code. (See Outlets for 2-Prong

Plug.)

Double insulated tools may be used 2.

in either of the 120 volt outlets shown

in the preceding illustration. (See

Outlets for 2-Prong Plug.)

Extension Cords

Grounded1. tools require a three wire

extension cord. Double Insulated

tools can use either a two or three

wire extension cord.

As the distance from the supply outlet 2.

increases, you must use a heavier

gauge extension cord. Using exten-

sion cords with inadequately sized

wire causes a serious drop in voltage,

resulting in loss of power and pos-

sible tool damage.

(See Table A.) The smaller the

gauge number of the wire, the greater

the capacity of the cord. For ex-

ample, a 14 gauge cord can carry a

higher current than a 16 gauge cord.

(See Table A.)

When using more than one exten-3.

sion cord to make up the total length,

make sure each cord contains at

least the minimum wire size required.

(See Table A.)

If you are using one extension cord 4.

for more than one tool, add the

nameplate amperes and use the sum

to determine the required minimum

cord size. (See Table A.)

If you are using an extension cord 5.

outdoors, make sure it is marked with



indicate it is acceptable for outdoor

use.

Make sure the extension cord is prop-6.

erly wired and in good electrical con-

dition. Always replace a damaged

Page 8SKU 98179 For technical questions, please call 1-800-444-3353.

extension cord or have it repaired by



Protect the extension cords from 7.

sharp objects, excessive heat, and

damp or wet areas.

RECOMMENDED MINIMUM WIRE

GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

EXTENSION CORD

LENGTH

25’

50’

75’

100’

150’

0 – 2.0 18 18 18 18 16

2.1 – 3.4 18 18 18 16 14

3.5 – 5.0 18 18 16 14 12

5.1 – 7.0 18 16 14 12 12

7.1 – 12.0 18 14 12 10 -

12.1 – 16.0 14 12 10 - -

16.1 – 20.0 12 10 - - -

TABLE A

* Based on limiting the line

voltage drop to ve volts at

150% of the rated amperes.

Symbology

Double Insulated

Canadian Standards Association



Volts Alternating Current

Amperes

xxxx/min.



(RPM)

Page 9SKU 98179 For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

Electrical Requirements 120 V~ / 60 Hz / 4.1 A

Motor Speed n

1500/min

Chuck Size 3/8 Inch

Chuck Type Keyless Chuck

E194601

90SM

UNPACKING

When unpacking, check to make sure

that the item is intact and undamaged. If

any parts are missing or broken, please

call Harbor Freight Tools at the number

shown on the cover of this manual as soon

as possible.

INSTRUCTIONS FOR

PUTTING INTO USE

Read the ENTIRE IMPORTANT

SAFETY INFORMATION section

at the beginning of this manual

including all text under

subheadings therein before set

up or use of this product.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the

tool to its “OFF” position and

unplug the tool from its

electrical outlet before

assembling or making any

adjustments to the tool.

Note: For additional information regarding

the parts listed in the following pages,

refer to the Assembly Diagram near

the end of this manual.

Functions

This drill is suitable for drilling opera-1.

tions.

The Trigger can be locked in the ON 2.

position for extended operation.

The Keyless Chuck allows the op-3.

erator to install and remove drill bits

without the use of a separate key or

other tool.

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION section

at the beginning of this manual

including all text under

subheadings therein before set

up or use of this product.

Tool Set Up

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the

tool to its “OFF” position and

unplug the tool from its

electrical outlet before

performing any inspection,

maintenance, or cleaning

procedures.

To insert a drill bit, hold the rear ring

of the Chuck (2) with one hand while turn-

ing the front ring with the other. Open the

jaws enough to allow the bit to slide in.

Turn the front ring the opposite direction to

tighten the jaws on the bit. Be sure the bit



hand.

Page 10SKU 98179 For technical questions, please call 1-800-444-3353.

Work Piece and Work Area Set Up

Designate a work area that is clean 1.

and well-lit. The work area must not

allow access by children or pets to

prevent injury and distraction.

Route the power cord along a safe 2.

route to reach the work area without

creating a tripping hazard or exposing

the power cord to possible damage.

The power cord must reach the work

area with enough extra length to al-

low free movement while working.

Secure loose work pieces using a 3.

vise or clamps (not included) to pre-

vent movement while working.

There must not be hazardous ob-4.

jects, such as utility lines or foreign

objects, nearby that will present a

hazard while working.

General Operating Instructions

Plug the Power Cord (36) into a suit-1.

able outlet.

Trigger (32)

Direction

Lever

Lock ON Button

2. 

Trigger (32) to determine the rotation

direction of the Chuck (2). Press to

the right side for clockwise Chuck

rotation. Press to the left side for

counterclockwise Chuck rotation.

Squeeze the Trigger (32) to start the 3.

tool. The Trigger has a variable speed

feature. Pressing it lightly will make

the tool operate slowly, pressing more

will cause the tool to operate faster.

You can lock the Trigger in the ON 4.

position by squeezing the trigger,



releasing the Trigger. The tool will

operate continuously. To stop the tool,

squeeze and release the Trigger.

To prevent accidents, turn off the tool 5.

and disconnect its power supply after

use. Clean, then store the tool in-

doors out of children’s reach.

The Drilling Operation

Use only well-sharpened bits that are 1.

in good condition and appropriate to

the task.

2.

do not press too hard. Too much

pressure will not help the process

and will cause the bit to overheat,

may cause the bit to bend or break,

cause undue strain on the tool, and

may damage the bit or work piece.

Pressing too hard may stall the mo-

tor. WARNING: If the motor stalls,

release the Trigger immediately, to

prevent damage to the tool.

Always drill in a straight line. Bending 3.

or twisting the bit while drilling may

cause the bit to bend or break and

may damage the work piece.

Back off your pressure when you are 4.

about to penetrate the work piece.

Page 11SKU 98179 For technical questions, please call 1-800-444-3353.

Keep the motor running when pull-5.

ing the bit out of a completed hole to

prevent the bit from jamming.

Metal Drilling

Use high speed steel, carbide or spe-1.

cialty bits for metal drilling.

Secure the work piece to keep it from 2.

moving during the drilling operation.

Use a punch to create a dimple for 3.

the bit to start.

Start by drilling slowly to keep the bit 4.

from moving away from your starting

point.

As the hole is established, increase 5.

tool speed. Do not go so fast or use

so much pressure that the bit heats

up. This can damage the bit and cre-

ate an irregular hole. For hard metal,

use cutting oil to keep the bit cool.

Since drilling in metal is a slow opera-6.

tion, you may lock the Trigger in the

ON position to maintain a constant

speed and reduce fatigue.

When drilling large holes in metal, 7.

start by drilling a smaller pilot hole,



size hole.

Wood Drilling

Use high speed bits or bits specially 1.

designed for wood drilling, such as

brad point, spade bits, forstner bits,

etc.

Secure the work piece to keep it from 2.

moving during the drilling operation.

Start by drilling slowly to keep the bit 3.

from moving away from your starting

point. Increase speed as the hole is

established.

To prevent or reduce “break out” 4.

when the bit penetrates the work

piece, clamp a piece of scrap mate-

rial to the back of the work piece.

Do not lock the Trigger in the ON 5.

position, as the bit can easily jam in

wood and the motor must be stopped

quickly.

Page 12SKU 98179 For technical questions, please call 1-800-444-3353.

MAINTENANCE AND

SERVICING

Procedures not specically

explained in this manual

must be performed only by a

qualied technician.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the

tool to its “OFF” position and

unplug the tool from its

electrical outlet before

performing any inspection,

maintenance, or cleaning

procedures.

TO PREVENT SERIOUS

INJURY FROM TOOL

FAILURE:

Do not use damaged

equipment. If abnormal noise

or vibration occurs, have the

problem corrected before

further use.

Cleaning, Maintenance, and

Lubrication

BEFORE EACH USE,1. inspect the

general condition of the tool. Check

for loose screws, misalignment or

binding of moving parts, cracked or

broken parts, damaged electrical wir-

ing, and any other condition that may

affect its safe operation.

AFTER USE,2. clean external surfaces

of the tool with clean cloth.

To prevent shock, never allow any 3.

liquids to enter the air ports of the tool

housing.

If the Carbon Brushes are damaged 4.

or worn, they must be replaced by a



5. WARNING! If the supply cord of

this power tool is damaged, it must

be replaced only by a qualied

service technician.

Page 13SKU 98179 For technical questions, please call 1-800-444-3353.

Troubleshooting

Problem Possible Causes Possible Solutions

Tool will not start No power at outlet.1.

Cord not connected.2.

Cord Damaged3.

Carbon Brushes worn or 4.

damaged

Check power at outlet.1.

Check that cord is plugged in.2.

Check condition of cord3.

Check condition of Carbon Brushes, replace 4.

if necessary.

Tool operates

slowly or

intermittently

Worn or damaged Carbon

Brushes

Check condition of Carbon Brushes, replace if

necessary.

Chuck will not turn Direction Button of Trigger may

be in middle position.

Press Direction Button fully to left or right.

Drill bit slips in

chuck

Jaws are loose1.

Bit is jammed in work piece2.

Tighten chuck 1.

Tighten chuck, then operate tool in reverse 2.

to back bit out of work piece.

Follow all safety precautions whenever diagnosing or servicing the

tool. Disconnect power supply before service.

PLEASE READ THE FOLLOWING CAREFULLY





DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT















Page 14SKU 98179 For technical questions, please call 1-800-444-3353.

PARTS LIST

Part # Description QTY

1 Phillips Head Screw 1

2 Keyless Chuck 1

3 Circlip 1

4 Steel Washer 1

5 Felt Washer 1

6 Steel Washer 1

7 Circlip 1

8 Bearing 6001 1

9 Spindle 1

10 Woodruff Key 1

11 Circlip 1

12 Gear Wheel 1

13 Circlip 1

14 Aluminum Motor Mount 1

15 O-Ring 1

16 Magnesium Alloy Sleeve 1

17 Rubber Charpiter 2

18 Steel Ball 2

19 Washer 2

20 Needle Bearing 1

PARTS LIST

Part # Description QTY

21 Gear Shift 1

22 Middle Gear 1

23 Needle Bearing 2

24 Bearing 1

25 Rotor 1

26 Carbon Brush Holder 2

27 Bearing 1

28 Bearing Sleeve 1

29 Self-Tapping Screw 3

30 Gear Housing 1

31 Stator 1

32 Trigger 1

33 Carbon Brush 2

34 Power Cord Clamp 1

35 Self-Tapping Screw 2

36 Power Cord 1

37 Power Cord Sleeve 1

38  1

39 Housing (Right) 1

40 Self-Tapping Screw 8

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not avail-

able individually as replacement parts.

Page 15SKU 98179 For technical questions, please call 1-800-444-3353.

ASSEMBLY DIAGRAM

Page 16SKU 98179 For technical questions, please call 1-800-444-3353.

LIMITED 90 DAY WARRANTY

Harbor Freight Tools Co. makes every effort to assure that its products meet high

quality and durability standards, and warrants to the original purchaser that this prod-

uct is free from defects in materials and workmanship for the period of 90 days from

the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,

criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

We shall in no event be liable for death, injuries to persons or property, or for incidental,

contingent, special or consequential damages arising from the use of our product. Some

states do not allow the exclusion or limitation of incidental or consequential damages, so

the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESS-





To take advantage of this warranty, the product or part must be returned to us with

transportation charges prepaid. Proof of purchase date and an explanation of the com-

-

ther repair or replace the product at our election or we may elect to refund the purchase

price if we cannot readily and quickly provide you with a replacement. We will return re-

paired products at our expense, but if we determine there is no defect, or that the defect

resulted from causes not within the scope of our warranty, then you must bear the cost

of returning the product.



which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

PERCEUSE EXTRA

ROBUSTES DE 3\8 PO

98179

INSTALLATION ET INSTRUCTIONS D’UTILISATION

Exclusivement distribué par Harbour Freight Tools.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visitez notre site web: http://www.harborfreight.com

Lire ce manuel avant d’utiliser ce produit.

Ne pas lire ce manuel pourrait causer de

sérieuses blessures. GARDEZ CE MANUEL.

(et/ou peuvent) être reproduit(s), en entier ou en partie, sans la permission écrite expresse de Harbor

Freight Tools. Les diagrammes contenus dans ce manuel pourraient ne pas être proportionnels. À cause des

améliorations continues, le produit actuel pourrait être légèrement différent de celui décrit dans ce manuel.

Pour toutes questions techniques ou pour des pièces de rechange, veuillez

contacter le 1-800-444-3353.

IMPORTANT!

Cette édition de langue

française est une traduction

du manuel anglais original

accompagnant ce produit. Si

une partie du manuel anglais

original est inconsistante

avec cette traduction, le

manuel anglais original

gouvernera.

MODÈLE Pour les questions techniques, appelez-vous s’il vous plaît 1-800-444-3353.

Français

98179

Page 2

GARDEZ CE GUIDE

Gardez ce guide pour les consignes

de sécurités et précautions, installation,

instructions d’utilisation, inspection, en-

tretien et nettoyage. Notez le numéro de

série du produit dans l’arrière de ce guide

à côté du schéma du produit, (ou notez la

date d’achat s’il n’y a pas de numéro de

série). Gardez ce guide et facture dans un

endroit sécuritaire et sec pour pouvoir le

consulter à l’avenir.

CONSIGNES

DE SÉCURITÉ

IMPORTANTES

Dans ce guide, sur l’étiquette, et

toute autre information prévue

avec ce produit:

Ceci est le symbole

d’alerte à la sécurité. Il

vous signale les dangers

potentiels de blessures

graves. Respectez tous

les messages de sécurité

qui suivent ce symbole

pour éviter une situation

hasardeuse imminente qui

peut résulter en perte de

vie ou blessures graves.

DANGER indique

une situation

hasardeuse imminente qui

résultera en perte de vie ou

blessures graves.

AVERTISSEMENT

indique une

situation hasardeuse

potentielle qui peut résulter

en perte de vie ou blessures

graves.

ATTENTION avec le

symbole d’alerte à

la sécurité indique une

situation hasardeuse

potentielle qui peut résulter

en blessures.

Avis indique une

situation non reliée

à blessures corporelle.

ATTENTION, sans

symbole d’alerte à

la sécurité indique une

situation non relié à blessures

corporelle.

Avertissements sur la sécurité

des outils électriques

AVERTISSEMENT Lire tous les

avertissements de sécurité ainsi

que toutes les instructions. Ne

pas respecter les avertissements

et instructions pourraient

provoquer des chocs électriques,

des feux et/ou des blessures

sérieuses. Gardez tous les

avertissements et toutes les

instructions pour des futures

références.

Le terme « outils électriques »,

mentionné dans ces

avertissements, est une référence

à votre outil électrique alimenté

par secteur (à l) ou à votre

outil électrique alimenté par

accumulateurs (sans l).

DANGER

AVERTISSEMENT

ATTENTION

Avis

ATTENTION

MODÈLE Pour les questions techniques, appelez-vous s’il vous plaît 1-800-444-3353.

Français

98179

Page 3

Sécurité de l’aire de travail1.

Gardez votre aire de travail propre a.

et bien éclairée.

Une aire de travail en désordre, ou

mal éclairée, est propice aux acci-

dents.

Ne pas utilisez des outils élec-b.

triques dans des atmosphères

explosives, tel qu’en présence de

liquides inammables, de gaz ou

de poussières. Les outils électriques

créent des étincelles, qui pourraient

enammer la poussière ou les éma-

nations.

Gardez les enfants et les passants c.

à distance lorsque l’outil électrique

est en fonction. Les distractions

pourraient vous faire perdre le contrô-

le de l’outil.

Sécurité électrique2.

Les ches d’alimentation des a.

outils électriques correspondent à

une prise électrique. Ne jamais mo-

dier les ches, de quelques façons

que ce soit.

Ne pas utiliser d’adaptateurs de b.

ches avec des outils électriques

reliés à la terre. Les ches et leurs

prises électriques correspondantes et

non modiées réduiront les risques

de décharges électriques.

Évitez les contacts corporels avec c.

des surfaces reliées à la terre, tel

que des tuyaux, des radiateurs,

des cuisinières et des réfrigéra-

teurs. Il y a un plus grand risque de

décharge électrique si votre corps

touche la terre.

Ne pas exposer votre outil électri-d.

que à la pluie ou à de l’humidité.

De l’eau qui entre dans votre outil

électrique augmente les risques de

décharge électrique.

Ne pas faire subir de mauvais trai-e.

tements au l électrique. Ne jamais

utiliser le l pour transporter, tirer ou

débrancher l’outil électrique. Gardez

le l hors de la portée de la chaleur,

de l’huile, des bords tranchants ou de

pièces mouvantes. Des ls endom-

magés ou entremêlés augmentent les

risques de décharge électrique.

Lorsqu’un outil électrique est uti-f.

lisé à l’extérieur, utilisez un cordon

de prolongation approprié pour

l’extérieur. Utilisez un cordon appro-

prié pour l’extérieur réduit le risque

de décharge électrique.

Si l’utilisation de l’outil électrique g.

dans un environnement humide

est inévitable, utilisez un Disjonc-

teur de fuite à la terre (GFCI). L’utili-

sation d’un GFCI réduit les risques de

décharge électrique.

Sécurité personnelle3.

Restez vigilant, portez attention à a.

ce que vous faites et utilisez votre

bons sens lorsque vous utilisez un

outil électrique. Ne pas utiliser un

outil électrique lorsque vous êtes fa-

tigué ou sous l’inuence de drogues,

d’alcool ou de médicaments. Un mo-

ment d’inattention lors de l’utilisation

d’un outil électrique pourrait causer

de sérieuses blessures.

Utilisez un équipement protec-b.

teur personnel. Toujours porter une

protection pour les yeux. De l’équi-

pement sécuritaire, tel qu’un masque

anti-poussières, des chaussures

antidérapantes, un casque de sécu-

rité ou une protection pour les oreilles

utilisées sous des conditions appro-

MODÈLE Pour les questions techniques, appelez-vous s’il vous plaît 1-800-444-3353.

Français

98179

Page 4

priées réduira les risques de blessu-

res personnelles.

Prévenir le démarrage non inten-c.

tionnelle. Assurez-vous que l’inter-

rupteur est en position fermée avant

de branchez l’outil à une source

d’alimentation et/ou du bloc de piles,

de soulever l’outil ou de le transpor-

ter.Transporter des outils électriques

avec un doigt sur l’interrupteur ou

alimenter l’outil qui a son interrup-

teur à Allumé, est une incitation aux

accidents.

Retirez toutes clés ou clés à ouver-d.

ture xe avant d’allumer l’outil.

Une clé à ouverture xe ou une clé

laissée sur une partie rotative de

l’outil électrique pourrait causer des

blessures sur la personne.

Ne pas viser trop haut. e. Gardez

prise et votre balance en tout temps.

An de permettre un meilleur contrôle

de l’outil électrique dans des situa-

tions inattendues.

Habillez-vous correctement. f. Ne

pas se vêtir de vêtements trop grand

ou porter des bijoux. Gardez vos

cheveux, vos vêtements et vos gants

hors de portée des pièces mouvan-

tes. Des vêtements trop grands, des

bijoux ou des cheveux longs peuvent

être capturés par des pièces mou-

vantes.

Si des dispositifs sont fournis pour g.

brancher l’extracteur de poussiè-

res à son collecteur, assurez-vous

que ces derniers soient branchés

correctement et utilisés de façon

appropriée. Utilisez ces dispositifs

peut réduire les dangers associés à

la poussière.

N’utilisez que de l’équipement de h.

sécurité qui a été approuvé par des

standards approuvés. De l’équi-

pement de sécurité non-approuvé

pourrait ne pas offrir une protection

adéquate. La protection des yeux doit

être approuvée par ANSI et la protec-

tion respiratoire doit être approuvée

par NIOSH pour les dangers spéci-

ques à l’aire de travail.

Utilisation et entretien de l’outil 4.

électrique

Ne pas forcer l’outil électrique. a.

Utilisez le bon outil électrique pour

vos besoins. L’outil électrique appro-

prié aura un meilleur résultat et sera

plus sécuritaire s’il est utilisé à bon

escient.

Ne pas utiliser l’outil électrique b.

si l’interrupteur ne peut se met-

tre ne position Allumé ou Fermé.

Tout outil électrique qui ne peut être

contrôlé avec l’interrupteur est dan-

gereux et doit être réparé.

Débranchez la che de l’alimen-c.

tation électrique et/ou le bloc de

piles de l’outil électrique avant de

faire un ajustement, changer un

accessoire ou l’entreposer. De tel-

les mesures de sécurité préventives

réduisent les risques de démarrez

l’outil électrique de façon acciden-

telle.

Entreposez les outils électriques d.

inactifs hors de la portée des

enfants et ne permettez pas à

des gens qui ne sont pas familier

avec l’outil électrique, ou avec ces

instructions, d’utiliser l’outil élec-

trique. Les outils électriques sont

dangereux lorsqu’ils sont entre les

mains non-familières d’utilisateurs.

Faire l’entretien des outils élec-e.

triques. Vériez s’il y a des désali-

gnements, des plis, des pièces qui

La page est en cours de chargement...

Chicago Electric 98179 Set Up And Operating Instructions Manual

Marque: Chicago Electric

Modèle: 98179

Catégorie: Coupe-bordures

Taper: Set Up And Operating Instructions Manual

Télécharger le PDF

rapport

dans d''autres langues

English: Chicago Electric 98179

Documents connexes

Autres documents

One Stop Gardens 98041 Set Up And Operating Instructions Manual