HAEGER DE-D16.013A Manuel utilisateur

Catégorie
Déshumidificateurs
Taper
Manuel utilisateur
1
RoHS
User instructions / Instruções de uso
Instrucciones de uso / Mode d’emploi
Οδηγίες χρήστη
Dehumidifier / Desumidificador
Deshumidificador / Déshumidificateur
Digi Desumi 16 * DE-D16.013A
Download
Multi-language file
2
These symbols are present in the user manual
1
English
Dear customer
Thank you for having chosen a HÆGER product.
The HÆGER products have been produced to think about the welfare of the consumer
privileging the most raised standards of quality, functionality and assign. We are sure you
will be happy with this appliance.
We assume that the user is familiar with the common procedures of handling household
appliances.
Before using the appliance for the first time please read carefully and thoroughly through
these operating instructions and the safety advice, completely familiarising yourself with
the appliance. Retain these instructions for future reference and pass them on to whoever
might acquire the appliance at a future date.
Intended use
The appliance is designed and produced for domestic use only. Use this appliance only as
described in this instruction manual. As with all electrical equipment, whilst the
instructions aim to cover as many eventualities as possible.
Caution and common sense should be applied when operating and installing this appliance.
For safety reasons, alterations or modifications of the device are prohibited.
Safety Instructions
Please read the operating instructions carefully before using your
dehumidifier for the first time and keep it on a safe floor.
To reduce the risk of fire, electrical shock, or injury when using your
appliance, follows these basic precautions:
Never immerse the appliance in water or other liquids.
Place the unit on a stable flat surface to avoid loud noises and vibrations.
Never operate the appliance if a cable or connector has been damaged,
after appliance malfunction or if the appliance was dropped or
otherwise damaged.
The appliance may only be repaired by qualified personal, improper
repair work can be a source of considerable danger for the users.
Pull out the power plug before transporting it and / or before cleaning.
Operate the appliance only at the voltage specified on the rating label.
The device may not be connected to a power strip with other household
appliances.
2
Use the appliance only in the household, and only for the purpose it was
developed for.
Do not operate this unit near heating appliances and flammable or
dangerous objects.
If the dehumidifier is operated in a room with gas driven devices, so the
room must be aired regularly and often.
Do not place heavy objects on the appliance.
Do not hang curtains or wet clothes in front of the air outlet, this will
overload the device.
The drainage hose may not be installed outdoors at low temperatures.
To prevent spillage, empty the water tank before relocating the
appliance.
Do not tip the appliance to any side as escaping water could damage the
appliance.
If you smell the smoke during start-up or if you can see the smoke,
immediately disconnect the power plug out and contact your dealer.
The unit should be installed with a minimum distance of 20 cm from the
wall or other obstacles.
WARNING:
Do not touch the plug at the mains cable with wet or moist
hands when connecting or disconnecting. Risk of death by
electric shock!
In case of emergency, unplug the device immediately.
Hold the plug when disconnecting the mains cable; do not pull the cable.
Disconnect the plug before cleaning or servicing.
Regularly check the device and cable for signs of damage. Do not
continue to operate the device in case of damage.
If the supply cord is damaged, it must be replaced by a qualified person
to avoid a hazard.
A damaged mains cable must be replaced by the manufacturer or a
technician and without any delay. Do not use the device with a damaged
cable or plug.
3
Do not repair the device by yourself. Please contact authorized
personnel.
Except for cleaning and maintenance work described in this manual, no
other alterations of this device must be executed.
Do not operate the device with an external timer or separate remote-
control system.
CAUTION!
In order to ensure your children’s safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of their
reach. Do not allow small children to play with the foil as
there is a danger of suffocation!
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
Cleaning and user maintenance shall not be made by children without
supervision
Keep the appliance and its cord out of reach of children less than 8 years.
The packaging must be undamaged. Check the device for any possible
transport damage. Do not install a damaged device. In case of damage,
please contact your distributor.
Do not install the appliance in rooms containing gas, oil or sulphur. Do
not install near sources of heat.
Do not use the appliance on sloping surfaces.
Keep the appliance at least 50 cm away from flammable substances
(alcohol etc) or pressurised containers (e.g., aerosol cans).
Do not rest heavy or hot objects on top of the appliance.
Always transport the appliance upright or resting on one side.
Remember to drain the condensate tank before moving the appliance.
Wait at least 1 hour after transporting the appliance before starting it.
4
WARNINGS (for using R290 refrigerant only)
R290 is a refrigerant gas that complies with the European directives on
the environment. Do not puncture any part of the refrigerant circuit. At
the end of its working life, consign the appliance to a specialist collection
centre.
DANGER: Propane gas (R290) is flammable, odourless gas.
While working on a machine, no smoking and no open flames
should be permitted.
If the appliance is installed, operated or stored in a nonventilated area,
the room must be designed to prevent to the accumulation of refrigerant
leaks resulting in a risk of fire or explosion due to ignition of the
refrigerant caused by electric heaters, stoves, or other sources of
ignition.
Do not use means to accelerate the defrosting process or to clean, other
than those recommended by the manufacturer.
Do not pierce or burn.
Appliance should be installed, operated and stored in a room with a floor
area larger than 4 m2.
Compliance with national gas regulations shall be observed.
Keep ventilation openings clear of obstruction.
The appliance shall be stored in a room without continuously operating
ignition sources (for example: open flames, an operating gas appliance
or an operating electric heater).
The appliance must be stored in such a way as to prevent mechanical
failure.
Individuals who operate or work on the refrigerant circuit must have the
appropriate certification issued by an accredited organization that
ensures competence in handling refrigerants according to a specific
evaluation recognized by associations in the industry.
Repairs must be performed based on the recommendation from the
manufacturing company. Maintenance and repairs that require the
assistance of other qualified personnel must be performed under the
supervision of an individual specified in the use of flammable
refrigerants.
5
The materials used for packaging can be recycled. You are therefore
recommended to dispose of them in special differentiated waste
collection containers.
Explanation of symbols displayed on the unit (For the R290 Refrigerant only):
WARNING
CAUTION
CAUTION
CAUTION
SAFETY PRECAUTIONS ON SERVICING
Please follow these warnings when to undertake the following when servicing a
dehumidifier with R290.
1. Checks to the area
Prior to beginning work on systems containing flammable refrigerants, safety
checks are necessary to ensure that the risk of ignition is minimized. For repair
to the refrigerating system, the following precautions shall be complied with
prior to conducting work on the system.
2. Work procedure
Work shall be undertaken under a controlled procedure so as to minimize the
risk of a flammable gas or vapor being present while the work is being
performed.
3. General work area
All maintenance staff and others working in the local area shall be instructed
on the nature of work being carried out. Work in confined spaces shall be
avoided. The area around the workspace shall be sectioned off.
Ensure that the conditions within the area have been made safe by control of
flammable material.
6
4. Checking for presence of refrigerant
The area shall be checked with an appropriate refrigerant detector prior to and
during work, to ensure the technician is aware of potentially flammable
atmospheres. Ensure that the leak detection equipment being used is suitable
for use with flammable refrigerants, i.e., no sparking, adequately sealed or
intrinsically safe.
5. Presence of fire extinguisher
If any hot work is to be conducted on the refrigeration equipment or any
associated parts, appropriate fire extinguishing equipment shall be available to
hand. Have a dry powder orCO2 fire extinguisher adjacent to the charging area.
6. No ignition sources
No person carrying out work in relation to a refrigeration system which
involves exposing any pipe work that contains or has contained flammable
refrigerant shall use any sources of ignition in such a manner that it may lead
to the risk of fire or explosion. All possible ignition sources, including cigarette
smoking, should be kept sufficiently far away from the site of installation,
repairing, removing and disposal, during which flammable refrigerant can
possibly be released to the surrounding space. Prior to work taking place, the
area around the equipment is to be surveyed to make sure that there are no
flammable hazards or ignition risks. “No Smoking” signs shall be displayed.
7. Ventilated area
Ensure that the area is in the open or that it is adequately ventilated before
breaking into the system or conducting any hot work. A degree of ventilation
shall continue during the period that the work is carried out.
The ventilation should safely disperse any released refrigerant and preferably
expel it externally into the atmosphere.
8. Checks to the refrigeration equipment
Where electrical components are being changed, they shall be fit for the
purpose and to the correct specification. At all times the manufacturer’s
maintenance and service guidelines shall be followed. If in doubt consult the
manufacturer’s technical department for assistance.
The following checks shall be applied to installations using flammable
refrigerants:
The charge size is in accordance with the room size within which the
refrigerant containing parts are installed;
The ventilation machinery and outlets are operating adequately and are
not obstructed;
7
If an indirect refrigerating circuit is being used, the secondary circuit shall
be checked for the presence of refrigerant;
Marking to the equipment continues to be visible and legible. Markings
and signs that are illegible shall be corrected;
refrigeration pipe or components are installed in a position where they
are unlikely to be exposed to any substance which may corrode
refrigerant containing components, unless the components are
constructed of materials which are inherently resistant to being corroded
or are suitably protected against being so corroded.
9. Checks to electrical devices
Repair and maintenance to electrical components shall include initial safety
checks and component inspection procedures. If a fault exists that could
compromise safety, then no electrical supply shall be connected to the circuit
until it is satisfactorily dealt with. If the fault cannot be corrected immediately
but it is necessary to continue operation, an adequate temporary solution shall
be used. This shall be reported to the owner of the equipment so all parties are
advised.
Initial safety checks shall include:
those capacitors are discharged: this shall be done in a safe manner to avoid
possibility of sparking;
that there no live electrical components and wiring are exposed while
charging, recovering or purging the system;
that there is continuity of earth bonding.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
Description of the appliance
1. Control panel
2. Handle
3. Air outlet grill
4. Air intake grille
5. Drainage hose outlet
6. Water tank
8
Before the first use
To prevent any internal damage, it is very important to keep
refrigeration units (like this one) upright throughout their
journey.
Please leave it standing upright and outside the box for 24
HOURS before plugging it in.
Installation
Location
Position the appliance in the room to be
dehumidified. A free space of at least 50 cm
must be left at the front of the
dehumidifier, so as not to block the air
outlet.
For efficient ventilation a space of about 20
cm should be left at the back of the
appliance.
Electrical connection
Warning: Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged, have it replaced by an
authorized service.
After moving the appliance, wait at least an hour before turning it on again.
Before plugging the appliance into the mains socket, check that:
The mains power supply corresponds to the working voltage indicated on the
rating plate.
The power socket and electrical circuit are adequate for the appliance.
The power socket matches the plug. If this is not the case, have the plug replaced
by a qualified electrician.
The mains socket is adequately earthed.
The plug, together with the grounding conductor, must fit into the wall socket.
The mains plug must be freely accessible.
Do not cut or remove the ground wire from the power cord supplied under any
circumstances.
Use of extension cords is not recommended.
9
Operating Instructions
IMPORTANT: Before connecting the appliance to the power source, let it stand
upright for approximately 1 hour. This will reduce the possibility of a malfunction
in the cooling system from handling during transportation.
IMPORTANT: In case you disconnect the device or in case of power failure, wait
for 3 minutes before restarting the device.
Before switching on your appliance, make sure that:
- the appliance is positioned in accordance with these instructions.
- the air inlet and outlet grills are completely unobstructed.
- the appliance is placed on a flat and stable surface.
Control Panel
Power Button: Press to turn the dehumidifier on and off.
Timer Button: Press to initiate the auto-start and auto-stop feature.
Lock (2s) Button: Press the button and hold for 2 seconds, the
control panel will be locked.
Up (+) Button: Set the humidity up.
Lighting Button: Control the LED panel to light up or go out.
Speed Button: Control the fan speed.
Down () Set the humidity down
10
Setting Humidity
The humidity level can be set within a range of 30%RH to 80%RH in 5% increments.
When it starts work, it will first automatically detect and show the room's humidity.
Press the button to change the humidity selection in 5% increments. The
display will flash  and show the setting humidity.
Press to make the humidity increase by 5%RH.
Press to make it decrease by 5%RH. After no operation for 5s, the display
will show the actual room humidity.
If the room humidity level is higher than your setting value, the dehumidifier will
automatically start working;
When the humidity drops to what you desire, the dehumidifier will automatically
stop and the on the screen will flash, indicating the wet control status.
When the humidity level is set at 30%RH, the dehumidifier will work at continuous
dehumidifying mode.
Timer Setting
This TIMER setting function is designed for you to set a time to turn off or turn on the
machine, automatically by the timer.
1. Press the button to select the timer by 1-hour increment. You can set the
timer up to 24 hours. It will start to do the countdown when you start the timer.
2. Press and hold the button for several seconds to make the selection of the
timer faster.
3. If the time is set to , this is called the invalid time. If you set the timer successfully,
the light will be up. The LED screen will show the remaining time if you press
the button, and display the current humidity automatically after a few
seconds.
Speed Button
Control the fan speed. Press to select either High (FAST) or Normal (SLOW) fan
speed. Higher fan speed will result in quicker moisture removal. Set the high speed for
maximum moisture removal. When the humidity has been reduced and quiet operation is
more preferred, set the fan speed back to Normal.
Light Function Setting
1. In the power on state, press the button to turn on or turn off the
backlight;
2. When light function is powered on, except the button and the
button is on, other backlight indicators will be off.
11
LOCK (2s)
When the unit is turned on, press and hold on for 2 seconds, the control panel will
be locked together with the other buttons.
To unlock the control panel, press and hold the button again for 2 seconds.
Power Off Memory Function
The device automatically restores the working state after power on.
If the device is turned on and a power interruption occurred, after starting the unit again,
it will keep the previous parameters of setup.
If the device is turned off and power interruption occurred, the device will still be in a
power off status when turned on.
Overflow Protection
When the water tank is full of water, the machine will turn off automatically. The indicator
light will flash. After you empty the water from the tank, the indicator light
will turn off. The machine will start to work.
Caution:
Water tank must be placed in right position, otherwise will cause the
water full alarm.
Auto Defrost Feature
When the dehumidifier running at a lower temperature, the system will automatically
determine whether there is a presence of frost. If any frost exists, it will defrost
automatically.
Defrost Action
The fan runs at high wind speed when the compressor stops, and the LED screen displays
the defrosting symbol .
Display Status Description
When the device is currently powered on, before any operation, only the "POWER" light
will be up indicating the device is in "Standby" status.
Setting light : If the timer is set up properly, the indicator light will be up,
flash if press TIMER button again to check and reset, and go out if non-successful
setup.
The lighting button : if the lighting function is powered on, the light
button will be on, but other backlight indicators will be off.
12
High-speed indicator light : If you set the unit to high-speed fan mode, this
indicator will light up.
Low-speed indicator light : If you set the unit to low-speed fan mode, this
indicator will light up.
Dehumidification light : When the machine starts to dehumidify, the
indicator light will be on.
Water full indicator light : When the water tank is full, this indicator will be
flashing.
LOCK indicator light : The indicator will light up if the control panel is locked
successfully, if not the indicator will not be on.
When the dehumidifier normally works, the display will show the current humidity.
Instructions for Drying Clothes
1. The dehumidifier can be used for drying clothes in rainy weather.
Step 1.
Hang the washed clothes in a small space such as cloakroom, bathroom, or storage room.
Note: Keep away the unit from the water drips of the washed clothes.
Step 2.
Open the dehumidifier and set the humidity level at 30%RH. It's the best if you let the air
outlet of the dehumidifier to blow air to the clothes directly.
2. The drying effect will vary from the thickness of clothes, the number of clothes and the
size of the drying space. Theoretically, the effect will be better when clothes are few,
thin and space is small.
3. The drying process would take 3-8 hours, and we suggest that continuous drainage
mode would be more suitable when drying clothes.
13
Faults & Processing Methods
Fault Phenomenon
Analysis of Causes
Processing Method
Humidity always shows
"25%RH" (There is a big
difference from the actual
humidity)
Humidity sensor failure?
Set the humidity to 30%RH, the
dehumidifier can still continue
to work, and can be used
normally.
Repair and replace the humidity
sensor.
Humidity always shows
"99%RH" (There is a big
difference from the actual
humidity)
1. Water on the surface of
the humidity sensor?
2. Humidity sensor failure?
The dehumidifier is not affected
and can continue to work, and
can be used normally.
Please let the dehumidifier
keep working for a period of
time, after the water on the
surface of humidity sensor is
removed, it will return to
normal.
Repair and replace the humidity
sensor.
Note:
Before starting the machine, please ensure that the air outlet has been opened, otherwise
the machine will overheat. Do not pull out the power cord directly to stop the machine.
Empty the Water Tank
Two ways are available to remove the collected water.
Use The Bucket
When the Water tank is already full, the WATER FULL indicator will light up, the
dehumidifier will automatically shut down until the tank has been emptied and placed
back to the unit.
Ways to Empty the Water Tank
14
1. Pull the water tank out from the bottom with both of your hands.
2. Invert the water tank to empty the water.
3. Put the water tank back in place, the water full indicator will go out.
Note:
Do not remove the float from the water tank. If the float in the water tank is removed,
the sensor may not be able to determine the water level stored in the tank properly
that may lead to water overflow leak from the water tank.
If the water tank is dirty, just use cold water or warm water to clean it. Do not use
detergent, steel wool, chemically treated dust cloth, gasoline, benzene, thinner or
other solvents. Otherwise, it may damage the water tank and cause it to leak.
When placing back the water tank, use your hands to press the tank back in its place.
If the water tank is not placed properly, sensors or protections from water overflow
may not operate as expected.
Continuous Drainage
Pull out the power supply, take out the water tank, open the drainage cap, remove the
black rubber plug, insert the water hose into the continuous drainage port and push it back
into the water tank.
Connect the power supply to start the operation. The water outlet of the water hose
should be lower than the continuous drainage port by more than 10 cm (3.9 inches), and
the water hose cannot be bent.
Take off the
water tank cover
Float
Water tank
15
(Note: The diameter of continuous drainage port is 1.6 cm (0.63 inches).)
1. Open the drainage cap.
2. Remove the black rubber plug.
3. Insert the water hose into the continuous drainage port.
Rubber Plug
Drainage Cap
Water Tank
16
Cleaning and Maintenance
WARNING:
Turn the dehumidifier off and remove the plug from the wall outlet before Cleaning.
A - Cleaning the dehumidifier body
Please use a soft and a slightly wet textile or cloth to clean it.
B - Cleaning filter
1. Pull out the filter.
2. Clean the filter: Use a vacuum cleaner to gently remove the dust from the surface
of the filter. If the filter is very dirty, wipe it with warm water and a mild detergent
and dry it completely.
3. Slowly insert the filter back into the machine body.
C - Dehumidifier storage
When you want to store the dehumidifier because you don't use it for a long time.
Please pay attention to the following steps:
1. Empty the water in the water tank.
2. Roll up the power cord and tie it up.
3. Clean the filter.
4. Place the machine in a cool and dry environment.
17
Troubleshooting
COMMON FAULTS AND SOLUTIONS
Check the information below for troubleshooting steps, it will save you time to resolve
issues that may happen with the unit.
The list includes most of the common cases, but not the results of defective unit, crafts
or materials in the unit.
If all troubleshooting steps have been exhausted and the issue is still occurring, please
feel free to reach out to Customer Service to get further assistance.
Problem
Reason
Method
Dehumidifier does not
work.
The power cord is unplugged.
Make sure that the unit's plug
is inserted properly into the
power outlet.
ls the Full Tank indicator blinking?
(The tank is full or in a wrong
position.)
Empty the water in the water
tank and then reposition the
tank.
ls the room temperature above
95°F (35°C) or below 41°F (5°C).
This product does not apply
to over hot or cold
environment, the machine
will automatically enter the
protection mode. It is a
normal phenomenon.
ls the room temperature between
41°F (5°C) and 68°F (20°C)?
When running under lower
ambient temperature, the
machine will automatically
defrost, which is a normal
phenomenon. it will restart
dehumidification again until
the defrosting process
finished.
The dehumidifier is in the
defrosting process.
It is normal the compressor
ceases while defrosting
process. Wait until the
process finished, it will restart
dehumidification again.
ls the room humidity lower or
reaching the preset humidity level?
(When the room humidity has
reached the preset level, the
dehumidifier will enter Standby
Mode and the indicator on LCD will
flash.
Please set the humidity 5%RH
lower than the room
humidity or set the humidity
to 30%RH.
This is to prevent the frequent start
of the machine. Does the machine
stop working just now?
Please wait for more than 3
minutes.
18
Room humidity is low.
The dehumidifier is designed
to work in the humidity range
of 30%-80%. Above or below
this range, it will not work.
Dehumidifier does not
dry the air as it should.
The air filter is dirty.
Clean the air filter.
ls the air inlet or air outlet
obstructed?
Remove the obstruction from
the air inlet or outlet.
The dehumidifier size is too small
for application.
Increase the quantity of
dehumidifier. Or change to a
higher capacity dehumidifier.
Poor air circulation.
Please leave about 20cm (7.9
inches) around the product.
Do not allow enough time to
remove the moisture.
Allow enough time to remove
the moisture. When first
installed, allow at least 3-4
days to maintain the desired
RH.
The room has not been sealed
properly.
Check that all doors, windows
and other openings are
securely closed.
Room temperature is too low, or
below 41°F (5°C). The machine will
not work or undergo poor
dehumidifying efficiency in low
temperature.
Please wait until the
temperature rises to above
41°F (5°C) or higher.
The dehumidifier
makes loud noise when
operating.
The dehumidifier is not positioned
levelly.
Move the machine to a
horizontal position.
ls there blocking around the air
inlet? The air filter is clogged.
Clean up the dirt or lint on
the air outlet and intake.
Is the filter installed correctly?
Please check whether the
packing bag of the filter had
been removed and the filter
has been installed correctly.
Dehumidifier operates
continuously.
Check if the dehumidifier is in
Continuous Mode.
Do Not set the humidity too
low. Typically, 40-50% are
good for use.
Room humidity is too high.
Change humidity settings. Or
change to a higher capacity
dehumidifier.
Doors and windows are open.
Ensure that all doors,
windows and other openings
are closed.
Overflow of water on
floor.
Hose to connector or hose
connection may be loose.
Connect the hose with the
drainage port tightly.
The water tank has not been
installed properly.
Re-install the water tank
properly.
The float of water tank has been
stuck.
Move the float and let it
swing freely.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

HAEGER DE-D16.013A Manuel utilisateur

Catégorie
Déshumidificateurs
Taper
Manuel utilisateur