Topdon BT50 Manuel utilisateur

Taper
Manuel utilisateur
12V Battery Tester 100-2000 CCA USER MANUAL
CONTENTS
Safety Is Always The
First Priority 6 21 37 53 69 85
DEEN FR ES IT RU
Compatibility
What is in the Box
Product Overview
Operation Introduction
FAQ
Technical Specication
Warranty
10 25 41 57 73 89
924 40 56 72 88
16 32 48 64 80 96
8 22 39 55 71 87
18 34 50 66 82 98
18 34 50 66 82 98
8 22 39 55 71 87
To download the multilingual PDF of the manual, please
visit https://www.topdon.com/products/bt50.
Alternatively, you can scan the QR Code.
•For multilingual user manuals, please scan the QR code.
•Für mehrsprachige Bedienungsanleitung scannen Sie bitte
den QR-Code.
•Pour les manuels multilingues, scannez le code QR.
•Para obtener manuales de usuario multilingües, escanee el
código QR.
•Per i manuali multilingue, scansionare il codice QR
•Para manuais do usuário multilíngues, escaneie o código
QR.
MANUAL SUPPORT IN
OTHER LANGUAGES
ENGLISH
SAFETY IS ALWAYS THE
FIRST PRIORITY!
READ ALL INSTRUCTIONS BEFORE USING
For your safety, the safety of others, the
product, and the vehicle you are working on,
PLEASE, CAREFULLY READ AND MAKE SURE
YOU FULLY UNDERSTAND ALL THE SAFETY
INSTRUCTIONS AND MESSAGES ON THIS
MANUAL.
ONLY OPERATE THE TEST IN A
WELL-VENTILATED AREA since the vehicle
produces carbon monoxide, a toxic and
poisonous gas, and particulate matter when
the engine is running.
ALWAYS WEAR APPROVED SAFETY EYE
PROTECTION to prevent damage from sharp
objects and caustic liquids.
ALWAYS BE AWARE OF MOVING PARTS (such
as coolant fans, pulleys, belts) since they spin
or turn at high speeds when the engine is
running.
DO NOT TOUCH HOT ENGINE PARTS to
prevent severe burns. The engine parts
become very hot when the engine is running.
EN | 7
DO NOT WEAR LOOSE CLOTHING OR
JEWELRY WHEN WORKING ON AN ENGINE.
Loose clothing can easily be caught in the
engine's fan, pulleys, belts, etc. and jewelry is
highly conductive, which causes severe burn
or electric shock if it contacts with electricity.
DO NOT CUT THE PRODUCTS CORDS OR
SUBMERGE THEM IN WATER. The product is
an electrical device that can cause shock and
severe burns.
Battery acid is extremely corrosive. If
acid gets into your eyes, FLUSH THEM
THOROUGHLY WITH COLD RUNNING WATER
FOR AT LEAST 20 MINUTES AND SEEK
MEDICAL ATTENTION IMMEDIATELY. If battery
acid gets on your skin or clothing, WASH IT
IMMEDIATELY WITH A SOLUTION OF WATER
AND BAKING SODA.
ALWAYS SHIFT THE GEAR TO P (FOR
AUTOMATIC TRANSMISSION) OR TO NEUTRAL
(FOR MANUAL TRANSMISSION) AND MAKE
SURE THE PARKING BRAKE IS ENGAGED.
ALWAYS USE A DIGITAL MULTIMETER WITH
AT LEAST 10 MEGOHMS OF IMPEDANCE
when conducting electrical tests on vehicles
to prevent causing damage to on-board
electronic components.
NO SMOKING ANYWHERE NEAR THE VEHICLE
when testing. The fuel and battery vapors are
highly ammable.
Refer to the battery label for battery type and CCA values
(Cold Cranking Amp).
1. Regular Flooded
2. AGM Flat Plate
3. AGM Spiral
4. GEL
5. EFB
Note: If your vehicle battery is not the battery mentioned
above and you are not sure about which type it is, please
choose AGM to conduct test, and the error is within 10%.
TOPDON BT50 Vehicle Battery Tester
User Manual
COMPATIBILITY
WHAT IS IN THE BOX
OK
EN | 9
Operations
Page up, or increase the battery rating values
Page down, or decrease the battery rating values
Conrm, enter or proceed
Cancel, or return to the previous page
Connect to the negative terminal of the vehicle battery
Connect to the positive terminal of the vehicle battery
Buttons
Black Smart
Clamp
OK
Red Smart
Clamp
PRODUCT OVERVIEW
The tool is solely powered by the vehicle battery. Connect
the RED (+) Positive Battery Clamp to the (+) positive battery
terminal, and connect the BLACK (-) Negative Battery Clamp
to the (-) negative battery terminal. Ensure that the clamps
are securely attached to the correct terminals.
The LED display will show the message below:
Press the "OK" to enter the main menu, then choose your
preferable language.
OPERATION
INTRODUCTION
1. BATTERY TEST (FOR 12V BATTERY)
TOPDON BT50 will test each battery according to the
selected actual system standard and rating marked on the
battery.
6. About
1. English
2. Fsançais
3. Deutsch
4. Español
5. Italiano
6. РУССКИЙ
EN | 11
1.1 BEFORE TEST
The engine and all other accessory loads must be OFF in
order to get accurate results. Turn on the vehicle headlamps
for 2~3 minutes until the battery voltage drops back to
normal value if the battery is just fully charged.
1.2 STEPS
1) Press the "OK" button to display the main menu. Then
select "1. Battery Test" and press the "OK" button to conrm.
2) Press and hold the "▲" or "▼" button to select the "Battery
Type" (specied on the battery rating label), then press "OK"
to continue.
3)Press and hold the "▲" or "▼" button to select the correct
testing standard (specied on the battery rating label), then
press the "OK" button to continue.
6. About
4) Press and hold the "▲" or "▼" button to select the battery
rating values (specied on the battery rating label).
5) Press the "OK" button to start the battery test.
6) The test result will display as follows:
7) Replace battery if test result displays as below :
2. CRANKING TEST
2.1 BEFORE TEST
The engine and all other accessory loads must be OFF in
order to get accurate results.
GOOD BATTERY
EN | 13
2.2 STEPS
1) Press the "OK" button to display the main menu. Then
select "2. Cranking Test" and press the "OK" button to
conrm.
2) Start the engine within 30 seconds.
3) The result will show as below:
Please refer to the table below to conrm the test result for
12V batteries.
GOOD≥10.7V
9.6~10.7V
<9.6V
NORMAL
CRANKING LOW
Cranking Voltage Conclusion
29
6. About
Crankingt Test
TIME 1003ms
VOLTAGE 11.59V
3. CHARGING TEST
3.1 BEFORE TEST
The engine must be ON during test.
3.2 STEPS
1) Press the "OK" button to display the main menu. Then
select "3. Charging Test" and press the "OK" button to
conrm.
2) Start your engine, then press the "OK" button to conduct
a "Ripple Test". The interface will stay for 5 seconds and then
automatically jump to next page.
3) Follow the on-screen instructions to increase your engine
speed to 2500 r/min and hold for 5 seconds. Then press the
"OK" button and wait a few seconds for the test result.
6. About
Please start engine,
Press OK to
continue.
EN | 15
4. REVIEW DATA
4.1 Press the "OK" button to display the main menu. Select
"4. Review Data" and press the "OK" button to conrm.
4) The test result will show as below:
Please refer to the table below to conrm the test result for
12V batteries.
* For reference only. Poorly functioning batteries can affect
the test data.
Status Battery Voltage Conclusion
Headlamps & A/C OFF
(Depress Accelerator)
≥15.0V CHARGING HIGH
CHARGING NORMAL
CHARGING LOW
NO OUTPUT
13.2V~15.0V
12.8V~13.2V
<12.8V
6. About
4.2 The last test result will be displayed as below:
Note: This battery tester saves the results of the last test, but
not all the test data.
FAQ
Q1: Can BT50 test the battery installed in the vehicle?
Q2: Is the test result accurate?
Q3: What batteries can BT50 work on?
Q4: Is BT50 designed with any built-in protections?
A: Yes, it supports in-vehicle and out-of-vehicle testing.
A: Yes. Our BT50 features advanced conductance detection,
able to give you accurate test results in seconds.
A: It works on 12V regular ooded, AGM Flat plate, AGM Spiral,
GEL and Deep Cycle batteries, with CCA between 100 to
2000.
A: Yes. It offers peace of mind with extra-safe Reverse Polarity
and Sparkproof protection, and easy operations even if you’re
new to battery testing.
GOOD BATTERY
EN | 17
Q5: How do I conrm if my vehicle battery is bad or good?
Q6: Can this battery tester estimate the remaining
capacity of my battery?
A: The battery tester will display SOH (State of Health), SOC
(State of Charge), CCA (Cold Cranking Ampere), Voltage,
Internal Resistance, and Rating, with an intuitive test result of
"GOOD" or "BAD" for your reference. If the internal resistance
is too large, it indicates a broken battery.
A: Yes. The battery tester will display SOC (State of Charge)
to express as a percentage of your battery’s rated capacity, a
measure of its condition to assess the potential energy.
Note that a decent SOC (State of Charge) doesn’t mean
the battery is in good condition. You need to refer to your
battery’s actual CCA Value and Internal Resistance for further
analysis.
WARRANTY
TOPDON THREE YEARS LIMITED WARRANTY
The TOPDON Company warrants to its original purchaser
that TOPDON products will be free from defects in material
and workmanship for 12 months from the date of purchase
(Warranty Period). For the defects reported during the
Warranty Period, TOPDON will, according to its technical
support analysis and conrmation, either repair or replace
the defective part or product.
TOPDON shall not be liable for any incidental or
consequential damages arising from the use, misuse, or
mounting of the device. Some states do not allow limitations
on how long an implied warranty lasts, so the above
limitations may not apply to you.
This limited warranty is void under the following
conditions:
Misused, disassembled, altered, or repaired by unauthorized
stores or technicians.
Careless handling and violation of operation.limitations may
not apply to you.
TECHNICAL SPECIFICATION
Working Temperature:
Storage Temperature:
Operating Voltage:
Dimensions:
Testing Range:
Battery Capacity Range:
-10°C~50°C (14°F~122°F)
-20°C~70°C (-4°F~158°F)
DC 8~16V
125.3 x 65.5 x 18.6mm (4.9 x 2.6 x 0.7")
100~2000 A
30~200 Ah
Notice: All information in this manual is based on the
latest information available at the time of publication,
and no warranty can be made for its accuracy or
completeness.
Topdon reserves the right to make changes at any time
without notice.
EN | 19
DEUTSCH
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102

Topdon BT50 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues