Wacker Neuson RD40-130 US Manuel utilisateur

Instruction manual

Tandem roller / Combination roller

RD 40 US / RD 45 US

Roller type RD 40 US / RD 45 US

Issue 02

Document order number

Language

As from serial number:

5100028171

en-fr

WNCR1001LHAA00160

2

BA RD 40 US / RD 45 US en* 00*

Manufacturer

Wacker Neuson Produktion GmbH & Co. KG

Preußenstraße 41

80809 München

www.wackerneuson.com

Phone: +49-(0)89-354 02-0

Fax: +49-(0)89-354 02-390

Original instruction manual

created:

changed:

01.12.2015

11.01.2016

BA RD 40 US / RD 45 US en* 00*

3

This instruction manual is valid for the following roller types:

TANDEM ROLLER RD 40-130 US

RD 40-130 O US

RD 45-140 US

RD 45-140 O US

COMBINATION ROLLER RD 40-130 C US

RD 45-140 C US

Table of Contents

4

BA RD 40 US / RD 45 US en* 00*

TABLE OF CONTENTS

1 Foreword................................................................................................................ 11

1.00 Introduction....................................................................................................... 12

1.00.01 Preface to the instruction manual........................................................................................ 12

1.00.02 Product information.............................................................................................................. 12

1.00.03 Warranty............................................................................................................................... 12

1.00.04 Modifications / reservations..................................................................................................13

1.00.05 Packaging and storage........................................................................................................ 13

1.00.06 Signs and symbols...............................................................................................................13

1.00.07 Signal words.........................................................................................................................14

1.01 Documentation.................................................................................................. 15

1.02 Use......................................................................................................................16

1.02.01 Intended Use........................................................................................................................ 16

1.02.02 Abnormal use....................................................................................................................... 17

1.02.03 Residual risks....................................................................................................................... 17

1.02.04 Climatic conditions............................................................................................................... 18

1.03 Environmental protection................................................................................ 19

1.04 Disposal............................................................................................................. 19

1.05 Type plate.......................................................................................................... 20

1.06 Noise and vibration requirements.................................................................. 23

1.07 Personnel...........................................................................................................24

1.07.01 Qualification and duties........................................................................................................24

1.08 General safety instructions............................................................................. 26

1.09 Danger zone...................................................................................................... 27

1.10 Loading and transporting................................................................................ 28

1.11 Stickers on the machine..................................................................................33

1.11.01 Warning labels......................................................................................................................33

1.11.02 Information sign....................................................................................................................35

2 Description.............................................................................................................39

2.00 Technical characteristics of the machine...................................................... 40

Table of Contents

BA RD 40 US / RD 45 US en* 00*

5

2.01 General view of machine................................................................................. 41

2.01.01 Chassis / safety devices.......................................................................................................41

2.01.02 Control stand........................................................................................................................ 42

2.01.03 Drive unit / diesel engine..................................................................................................... 43

2.01.04 Hydraulic oil supply..........

.................................................................................................... 44

2.01.05 Electrical equipment............................................................................................................. 45

2.01.06 Drive..................................................................................................................................... 47

2.01.07 Steering system....................................................................................................................48

2.01.08 Water system........................................................................................................................48

2.01.09 Vibration / Oscillation............................................................................................................49

2.02 General view of instruments

and operating elements..................................50

2.02.01 Control stand........................................................................................................................ 50

2.02.02 Transmission........................................................................................................................ 55

3 Operation............................................................................................................... 56

3.00 Instruments and operating elements............................................................. 57

3.00.01 Indicators, displays...............................................................................................................57

3.00.02 Pilot lights............................................................................................................................. 57

3.00.03 Switch................................................................................................................................... 62

3.00.04 Sockets, lights...................................................................................................................... 70

3.00.05 Operating levers, adjustment handles................................................................................. 70

3.01 Prior to machine start...................................................................................... 74

3.02 Engine start....................................................................................................... 76

3.03 Driving................................................................................................................78

3.04 Driving with vibration / oscillation.................................................................. 81

3.05 Stopping, switching off engine, leaving machine......................................... 83

3.06 Operation monitoring....................................................................................... 85

3.06.01 Filling levels..........................................................................................................................85

3.06.02 Pilot lights............................................................................................................................. 85

3.06.03 Diagnostic code....................................................................................................................86

3.06.04 Exhaust gas treatment with diesel particulate filter (DPF)...................................................87

3.07 Water sprinkling................................................................................................91

3.08 Additive sprinkling........................................................................................... 93

Table of Contents

6

BA RD 40 US / RD 45 US en* 00*

3.09 Scraper...............................................................................................................94

3.09.01 Roller drum scraper, top...................................................................................................... 94

3.09.02 Roller drum scraper, down...................................................................................................95

3.09.03 Scrapper tyres...................................................................................................................... 95

3.10 Track offset........................................................................................................96

3.11 Battery cut-off (battery isolating switch)....................................................... 97

3.11.01 Operation.............................................................................................................................. 97

3.12 Start with jump leads....................................................................................... 99

3.13 Towing..............................................................................................................101

3.14 Driving on public roads................................................................................. 104

3.14.01 Applicable in the User's Country........................................................................................104

4 Maintenance.........................................................................................................105

4.00 General maintenance instructions................................................................106

4.00.01 Operation monitoring..........................................................................................................106

4.00.02 Maintenance overview........................................................................................................106

4.00.03 Running-in regulations....................................................................................................... 109

4.00.04 Important information about maintenance works............................................................... 109

4.00.05 Safety strut......................................................................................................................... 111

4.00.06 Welding works on the machine..........................................................................................112

4.01 Chassis / safety features............................................................................... 113

4.01.01 General............................................................................................................................... 113

4.01.02 Checking the function of the parking brake....................................................................... 113

4.01.03 Checking EMERGENCY STOP function........................................................................... 114

4.02 Drive unit - diesel engine.............................................................................. 115

4.02.01 General............................................................................................................................... 115

4.02.02 Maintenance points at the Diesel engine when changing oil.............................................117

4.02.03 Replacing filter insert of the fuel pump.............................................................................. 117

4.02.04 Replacing filter cartridge for the fuel filter..........................................................................118

4.02.05 Changing filter cartridge for the fuel prefilter..................................................................... 119

4.02.06 Checking and cleaning dust discharge valve.................................................................... 120

4.02.07 Checking and replacing the air filter.................................................................................. 121

4.02.08 Changing safety cartridge.................................................................................................. 122

4.02.09 Checking radiator............................................................................................................... 123

4.02.10 Checking coolant level....................................................................................................... 123

4.02.11 Changing coolant............................................................................................................... 124

Table of Contents

BA RD 40 US / RD 45 US en* 00*

7

4.03 Hydraulic oil supply....................................................................................... 126

4.03.01 General............................................................................................................................... 126

4.03.02 Checking hydraulic oil level............................................................................................... 126

4.03.03 Changing hydraulic oil and ventilation filter....................................................................... 127

4.03.04 Replacing filter insert of pressure filter for hydraulic system............................................. 128

4.04 Drive................................................................................................................. 130

4.04.01 Check the drive lever......................................................................................................... 130

4.04.02 Checking the roller drum scraper...................................................................................... 130

4.04.03 Checking scraper tyre........................................................................................................ 131

4.04.04 Lubricate the scraper stop lever........................................................................................ 132

4.04.05 Checking wheel nuts / wheel bolts for tightness................................................................132

4.04.06 Checking air pressure in the tyres..................................................................................... 133

4.04.07 Wheel change.................................................................................................................... 133

4.05 Steering system.............................................................................................. 135

4.05.01 General............................................................................................................................... 135

4.05.02 Lubricating pivoted bearing................................................................................................ 135

4.05.03 Lubricating steering cylinder bolt....................................................................................... 136

4.06 Sprinkling.........................................................................................................137

4.06.01 General............................................................................................................................... 137

4.06.02 Cleaning water sprinkling unit............................................................................................ 137

4.06.03 Cleaning filter for water sprinkling......................................................................................138

4.06.04 Cleaning sprinkler nozzles................................................................................................. 138

4.07 Vibration / oscillation......................................................................................139

4.07.01 Checking damping elements..............................................................................................139

4.07.02 Changing the toothed belt for the oscillation drive............................................................ 139

5 Tables................................................................................................................... 140

5.00 Technical data................................................................................................. 141

5.00.01 Engine oil............................................................................................................................141

5.00.02 Hydraulic oil........................................................................................................................142

5.00.03 Use of biologic hydraulic oil............................................................................................... 142

5.00.04 Coolant conditioning...........................................................................................................143

5.00.05 Fuel.....................................................................................................................................143

5.00.06 Overview of lubricant details.............................................................................................. 144

5.00.07 Starting torques.................................................................................................................. 144

Table of Contents

8

BA RD 40 US / RD 45 US en* 00*

5.01 Technical data................................................................................................. 146

5.01.01 RD 40-130 US....................................................................................................................146

5.01.02 RD 40-130 O US................................................................................................................148

5.01.03 RD 40-130 C US................................................................................................................150

5.01.04 RD 45-140 US....................................................................................................................152

5.01.05 RD 45-140 O US................................................................................................................154

5.01.06 RD 45-140 C US................................................................................................................156

5.02 Dimension sheet............................................................................................. 158

5.02.01 RD 40-130 US, RD 40-130 O US......................................................................................158

5.02.02 RD 40-130 C US................................................................................................................158

5.02.03 RD 45-140 US, RD 45-140 O US......................................................................................159

5.02.04 RD 45-140 C US................................................................................................................159

5.03 Fuses................................................................................................................160

5.03.01 Main fuses.......................................................................................................................... 160

5.03.02 Battery isolating switch.......................................................................................................160

5.03.03 Fuses, steering console..................................................................................................... 160

5.03.04 Fuses, engine compartment...............................................................................................161

6 Assembly Instructions and Auxiliary Devices.................................................162

6.00 ROPS roll-over bar......................................................................................... 163

6.01 ROPS cabin..................................................................................................... 165

6.01.01 Operator's cabin overview..................................................................................................165

6.01.02 General view of instruments and operating elements....................................................... 166

6.01.03 Switch................................................................................................................................. 167

6.01.04 Sockets, lights.................................................................................................................... 169

6.01.05 Operating levers, adjustment handles............................................................................... 169

6.01.06 Heating system / Ventilation...............................................................................................169

6.01.07 Maintenance....................................................................................................................... 170

6.01.08 Technical data.................................................................................................................... 172

6.01.09 Dimension sheet.................................................................................................................174

6.01.10 Fuses.................................................................................................................................. 175

6.02 Comfort seat....................................................................................................176

6.02.01 Overview.............................................................................................................................176

6.02.02 General view of instruments and operating elements....................................................... 177

6.02.03 Switch................................................................................................................................. 178

6.02.04 Operating levers, adjustment handles............................................................................... 178

6.02.05 Operation............................................................................................................................ 180

6.02.06 Maintenance....................................................................................................................... 181

Table of Contents

BA RD 40 US / RD 45 US en* 00*

9

6.03 Injection of antifreeze for the sprinkler........................................................183

6.03.01 Overview.............................................................................................................................183

6.03.02 Operation............................................................................................................................ 183

6.04 Rotating light removable............................................................................... 185

6.04.01 Overview.............................................................................................................................185

6.04.02 General view of instruments and operating elements....................................................... 185

6.04.03 Operation............................................................................................................................ 185

6.04.04 Assembly............................................................................................................................ 186

6.04.05 Maintenance....................................................................................................................... 187

EC declaration of conformity

10

BA RD 40 US / RD 45 US en* 00*

EC DECLARATION OF CONFORMITY

Foreword

BA RD 40 US / RD 45 US en* 00*

11

1 FOREWORD

NOTE

When working at the machine please always adhere to the

instructions given in your Safety instructions!

000-01

This instruction manual contains information and procedures for the

safe operation and maintenance of your Wacker Neuson machine. In

the interest of your own safety and to prevent accidents, you should

carefully read through the safety information, familiarize yourself with it

and observe it at all times.

This instruction manual is not a manual for extensive maintenance and

repair work. Such work should be carried out by Wacker Neuson service

or authorized specialists.

The safety of the operator was one of the most important aspects taken

into consideration when this machine was designed. Nevertheless,

improper use or incorrect maintenance can pose a risk. Please operate

and maintain your Wacker Neuson machine in accordance with the

instructions in this instruction manual. Your reward will be troublefree

operation and a high degree of availability.

Defective machine parts must be replaced immediately!

Please contact your Wacker Neuson representative if you have any

questions concerning operation or maintenance.

No part of this publication may be reproduced in any form or by any

means, electronic or mechanical, including photocopying, without the

expressed written permission of Wacker Neuson.

Any type of reproduction, distribution or storage on data media of

any type and form not authorized by Wacker Neuson represents an

infringement of copyright and will be prosecuted.

We expressly reserve the right to make technical modifications – even

without special notice – which aim at further improving our machines or

their safety standards.

Foreword

Introduction

12

BA RD 40 US / RD 45 US en* 00*

1.00 Introduction

1.00.01 Preface to the instruction manual

This chapter contains important instructions for the operating personnel

on how to operate the machine and to use this instruction manual.

This instruction manual helps you:

■

To become familiar with the machine.

■

To avoid malfunctions due to improper use.

Adhering to this instruction manual:

■

Helps to avoid risks.

■

Increases the reliability when working on the construction site.

■

Increases the service life.

■

Reduces maintenance costs and downtimes.

It is absolutely necessary to adhere to this instruction manual, the

instructions given in the safety instructions, supplementary information

and all regulations and provisions applying at the building site (e.g.

accident prevention regulations).

Maintenance and care of the diesel engine have to be performed

according to the instructions for the motor. The safety instructions must

be observed.

1.00.02 Product information

You have received a quality product. All the components of this

machinehave been carefully inspected and tested. As a result, they

comply with the quality that you expect.

The reliability of the machine is preserved through correct use and careful

maintenance. This includes the use of the specified operating supply

items and the use of original spare parts.

Our representatives will help you to keep your roller in a perfect operating

condition.

After the warranty period, our representatives will also assist you with

advice and service. They will supply you with our original spare parts

which do not only meet the technical requirements but also ensure

exchangeability and quality.

The safety, operating and maintenance instructions given in this

instruction manual are intended for the operating personnel. Thus, keep

this manual always at hand!

1.00.03 Warranty

No guarantee claims with:

■

Operating errors.

■

In the case the spare parts used are no original spare parts.

■

In the case wrong operating supply items have been used.

■

In the case any additional devices have been refitted and/or installed

that have not been approved by manufacturer.

■

In the case of deficient maintenance.

■

In the case of any processes that conflict with this instruction manual.

Foreword

Introduction

BA RD 40 US / RD 45 US en* 00*

13

1.00.04 Modifications / reservations

We are committed to provide you with correct and updated instruction

manual. However, we cannot guarantee the correctness of all data given.

To be able to keep pace with changing trends, it may be necessary to

amend or modify the product and/or how it is operated without prior

notice. We assume no liability for malfunctions, downtimes and resulting

damage.

1.00.05 Packaging and storage

We have carefully packed our products to ensure proper protection in

transit. Please check both packaging and the goods yourself for any

damage upon reception of your goods. In the case of damage, the

devices must not be put into operation. Damaged cables and connections

are a safety risk and must not be used.

In such a case, please contact your supplier.

If the devices are not put into operation upon unpacking, they must be

protected against humidity and dirt.

1.00.06 Signs and symbols

The signs and symbols used in this instruction manual are to help you

use this instruction manual and the device in a safe and fast manner.

Note Informs about application hints and useful information. No danger-

ous or harmful situation.

Enumeration Indicates a listing of issues or possibilities.

Operating steps

1.

Are listed according to their succession each starting from 1 for

each individual process.

Option Indicates special equipment which varies from the standard.

Directions Information on directions contained in these instructions such as left or

right and/or front or rear always refer to the directions of the machine

driving forwards.

Cross-references Cross-references help you to find quickly sections in this instruction

manual which supply you with additional important information. The

cross-reference shows you the page of the relevant section. The

abbreviation sqq. means "and the following pages".

Example: (see page 134 sqq.)

Positioning of illustrations The positions of illustrations are represented with letters and numbers.

The positions identified with letters in alphabetical order are only

explained in the corresponding text segment, beginning new for

each single figure. The positions marked with numbers apply to

operating elements, control units and switches. They are identical to

the numbers in the section Overview of instruments and operating

elements (see page 50 sqq.). These numbers in squared brackets

are used as a reference in the description of the elements. Amongst

others, this ensures that important and additional information can be

found immediately and without any difficulty in the descriptions of the

elements. The end of the positioning line is marked as dot or arrow. In

the illustration the dot marks a visible element and an arrow an invisible

element which is in arrow direction.

Foreword

Introduction

14

BA RD 40 US / RD 45 US en* 00*

Example

15270

501

520

A

B

Legend

[A] Driver [B] Engine compartment

Descriptive text

The drive lever [501] determines the driving direction and speed.

Using the lever [520] you can adjust the pretension of the attenuation

system to the driver's weight.

1.00.07 Signal words

A signal word identifies a source of dangers and residual risks.

DANGER

Identifies immediate danger. If this risk is not prevented, this causes

death or severe personal injuries.

001-01

WARNING

Refers to situations that may be dangerous. If this situation is not

avoided, fatality or very serious injuries may be caused.

002-01

CAUTION

Refers to situations that may be dangerous. If this situation is not

avoided, minor or light injuries may be caused.

003-01

NOTICE

Refers to a situation that may cause property damage.

004-01

Foreword

Documentation

BA RD 40 US / RD 45 US en* 00*

15

1.01 Documentation

This instruction manual is intended to make the operating personnel

familiar with basic work steps / activities of and with the machine.

The entire instruction manual consists of:

■

Safety instructions

■

Instruction manual of the machine

■

Instruction manual of the diesel engine

■

If necessary, additional information (e. g. QR code)

The entire instruction manual must always be available at the machine

and be accessible to the authorized operating personnel at all times. Prior

to operating the machine, you must have carefully read und understood

this instruction manual. In case you do not understand this instruction

manual or individual parts, please ask us prior to starting these activities.

The instruction manual includes valuable information in order to operate

the machine safely, appropriately and economically.

Foreword

Use

16

BA RD 40 US / RD 45 US en* 00*

1.02 Use

1.02.01 Intended Use

The machine represents state-of-the-art technology and complies with

all valid safety regulations concerning its intended use at the time the

machine was launched on the market.

When designing the machine it was not possible to avoid foreseeable

misuse or residual risks without restricting the machine's intended

functionality.

The maschine's intended use is:

■

To pave roads and traffic areas.

■

To ram and smooth loose earth, road bedding, pavement or similar

ramable subgrade in layers.

The machine may only be deployed on surfaces that can support it.

Not capable of bearing are e.g. high fillings, batters, roadside ditches.

The machine may not be used in explosive areas, on landfill sites and in

mining.

The machine is only intended for commercial applications within fenced

construction sites.

The machine must only be operated by authorised operating personnel

and only if in proper technical condition and in accordance with this

instruction manual.

All unintended use and/or all machine-related activities not described in

this instruction manual is to be deemed as unauthorised misuse outside

the legal limits of indemnity of the manufacturer.

Foreword

Use

BA RD 40 US / RD 45 US en* 00*

17

1.02.02 Abnormal use

Any abnormal use or any misuse of the machine will void the

manufacturer's warranty obligation, and the owner will bear the sole

responsibility in this case.

Abnormal uses shall be deemed to include:

■

Non-compliance with this instruction manual.

■

Operating errors by operating personnel not qualified or not

instructed.

■

Conveyance of passangers.

■

Leaving the driver's position during operation.

■

Starting, using the machine outside the driver's position.

■

Errors due to "reflexive behaviour" and/or "chosing the easiest way".

■

Operating the machine if it is not in a proper technical condition.

■

Using the machine with improper ambient conditions (e.g.

temperature, gradient, transverse gradient).

■

Using the machine with the protective equipment removed.

■

Spraying with high-pressure cleaners or fire extinguishing equipment.

■

Towing trailing loads.

■

Non-compliance with maintenance intervals.

■

Omission of measurements and tests to detect damages early.

■

Omission of replacing wear parts.

■

In the case the spare parts used are no original spare parts.

■

Omission of maintenance and repair works.

■

Improper maintenance and repair works.

■

Unauthorised modifications of the machine.

1.02.03 Residual risks

Residual risks have been analysed and evaluated prior to starting the

construction and planning the machine. Existing residual risks are

referred to in the documentation. However, the manufacturer cannot

foresee all situations that may pose a risk in practice.

You can avoid existing residual risks if you comply with and

implement the following instructions:

■

Special warnings at the machine.

■

General safety instructions in this instruction manual and in the safety

instructions .

■

Special warnings in this instruction manual.

■

Instructions contained in the safety instructions.

■

Operating instructions of the operator.

Danger of life / risk of personal injury when operating the machine

due to:

■

Misuse.

■

Improper operation.

■

Transport.

■

Missing protective equipment.

■

Defective and/or damaged components.

■

Operation / usage by personnel not trained and/or instructed.

Foreword

Use

18

BA RD 40 US / RD 45 US en* 00*

The machine may cause risk to the environment with:

■

Improper operation.

■

Operating supply items (lubricants etc.).

■

Noise emission.

Property damage may occur at the machine e.g. with:

■

Improper operation.

■

Non-compliance with operating and maintenance instructions.

■

Improper operating supply items.

Property damage may occur at further assets within the

machine's operating area e.g. with:

■

Improper operation.

Reduction in performance and/or the machine's functionality may

occur at the machine with:

■

Improper operation.

■

Improper maintenance and/or repair works.

■

Improper operating supply items.

1.02.04 Climatic conditions

Low ambient temperature The diesel engine's starting behaviour and the machine's operation

depend on:

■

The fuel used.

■

The viscosity of the motor, gear and hydraulic oil.

■

The battery's charge state.

Please note:

The acceleration and braking behaviour of the machine are influenced by

viscous hydraulic oil. Prior to cold seasons (autumn, winter) please adjust

all operating supply items (coolants, oils etc.) to low temperatures.

Please use fuels suitable in winter or additives improving the flow with

temperatures below 0 °C (32 °F) (see page 143 sqq.). Do not charge

batteries with temperatures below 0 °C (32 °F).

WARNING

Explosion!

Risk of injury due to burns and moving parts.

■

Do not use aerosol start-up aid (e.g. aether).

■

Do not use any liquids as start-up aid (e.g. alcohol).

002-02

Extensive ambient

temperature, extensive

height

See instruction manual of diesel engine.

Foreword

Environmental protection

BA RD 40 US / RD 45 US en* 00*

19

1.03 Environmental protection

Packing materials, cleaning agents and used or residual operating supply

items are to be disposed according to relevant environmental provisions

at the building site using the recycling systems provided.

1.04 Disposal

Conservation of nature is one of our major tasks. Properly disposed

devices avoid negative impacts on human beings and the environment

and allows re-using our precious resources.

Operating supply items Please dispose all operating supply items according to relevant

specifications and local regulations of the relevant country.

Materials (metal, plastics) To be able to dispose materials professionally, these materials need to be

correctly sorted. Cleanse materials of adhesive impurities.

Please dispose all materials as demanded by local provisions of the

relevant country.

Electical / electronic system /

battery

Electrical / electronical components are not subject to

Directive 2002/96/EC and relevant national regulations (in Germany e.g.

ElektroG).

Dispose electrical / electronic components directly at a specialised

recycling company.

Foreword

Type plate

20

BA RD 40 US / RD 45 US en* 00*

1.05 Type plate

NOTE

For machines without EC Conformity, neither an EC

Declaration of Conformity nor a CE type plate can be issued.

This is the case if, for example, the machine does not have a

drum drive, drum brake or roll-over protection.

000-45

The entire marking represents an official document and must not be

altered or effaced.

NOTE

Please state the vehicle identification number (VIN) and the

type of your machine for every spare part order.

Machine type plate The type plate is fixed to the machine frame ("Chassis / safety features").

NOTE

The VIN [E] indicates the type series and the serial number of

the machine e.g. WNCxxxxxxxxxxxxxx.

The maximum operating weight [J] is the static weight of the

machine including:

■

Working substances and lubricants

■

100 % fuel tank contents x 0.84 specific weight

■

100 % water & additive tank contents

■

75 kg for the driver

■

the static weight of all options or auxiliary devices at the

same time and approved by the manufacturer (e.g., chip

spreader).

No additional ballasting is allowed.

La page charge ...

Wacker Neuson RD40-130 US Manuel utilisateur

Ce manuel convient également à

Wacker Neuson RD40-130 US Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents