Samsung UN46F8000AF Guide de démarrage rapide

Taper
Guide de démarrage rapide

Ce manuel convient également à

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs
Samsung.
Country Customer Care
Center
Web Site Address
CANADA 1-800-SAMSUNG
(726-7864)
www.samsung.com/ca (English)
www.samsung.com/ca_fr (French)
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
U.S.A 1-800-SAMSUNG
(726-7864)
www.samsung.com/us Samsung Electronics America, Inc. 85
Challenger Road Ridgeeld Park, NJ 07660
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04786B-08
LED TV
user manual
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________Serial No. _____________
If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
[UF8000-ZC]BN68-04786B-08L02.indb 1 2013-10-28 �� 6:58:37
English - 2
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries
properly. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the
local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately
and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
(especially when children, elderly or disabled people will be left alone in the house).
Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or
the insulation to deteriorate.
• Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low
temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such in an airport, a train station, etc. Failing to
do so may lead to serious damage of your TV.
• Use only a properly grounded plug and wall outlet.
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be
readily accessible at all times.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
• Do not drop or apply any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals
such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance
of the TV or erase the printing on the product.
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in fire.
• Do not short-circuit, disassemble or overheat the batteries.
• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace
only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
Important Safety Instructions
Warning! Important Safety Instructions
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK DO NOT OPEN
[UF8000-ZC]BN68-04786B-08L02.indb 2 2013-10-28 �� 6:58:38
English - 3
Contents
Basic Features
5 Using the Smart Touch Control
6 Connecting to the TV
6 Inserting the Batteries (AAA X 2)
7 Low Battery Power Warning
8 Using the touch pad
8 Changing Channels by Entering Numbers
9 Show Status and Notification Banner
9 Recommended
9 History
9 Searching
9 Using the Virtual Remote Control
10 Turning on the TV
11 Built-in TV Camera and Microphone
11 Extending the TV Camera
11 Retracting the Camera
12 Switching Between Video Sources
13 Universal Remote Setup
13 Add the External Device
Viewing the e-Manual
14 Viewing the e-Manual
14 Scrolling a Page
14 Using the Top Icons
14 Returning to the Home Page
14 Searching the Index
15 Searching Pages
15 Closing the e-Manual
15 Jumping to a Menu Item
15 Updating the e-Manual
Network Configuration
16 Connecting to a Network
16 Network Connection - Wireless
16 Wireless Network Precautions
16 Network Security Protocols
17 Network Connection - Wired
3D Basics
18 3D Active Glasses
18 Pairing 3D Active Glasses
20 Watching 3D Video
Troubleshooting and Other
Information
21 What is Remote Support?
21 The Evolution Kit Slot (Kit Sold Separately)
22 Troubleshooting
23 Mounting the TV on the Wall Using
the Wall Mount Kit (Optional)
25 Assembling the Cable clip
25 Assembling the Power inlet Cover
26 Eco Sensor and Screen Brightness
27 Maintenance
27 Providing Proper Ventilation for Your TV
28 Securing the TV to the Wall
Specifications
30 Specifications
31 Dimensions
31 Licenses
Guides
32 Warranty Information
34 Regulatory Compliance Statements
(For 3D Active Glasses)
[UF8000-ZC]BN68-04786B-08L02.indb 3 2013-10-28 �� 6:58:38
English - 4
Figures and illustrations in this User Manual are provided for reference only and may differ from the actual
product appearance. Product design and specifications may change without notice.
Features of your new TV
3D: This new feature enables you to view 3D content.
SMART HUB:
This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you
can surf the web, download applications, and stay in touch with family and friends through social
networking services. In addition, you can view or play photo, video, and music files stored on external
storage devices.
Press the button to launch Smart Hub. Choose a service using the icons displayed in the top part of
the screen.
Smart Hub services and functionality include:
Social: Watch the latest YouTube videos and your and your friends' video posts on Facebook and
Twitter. You can also make video calls to friends by the TV camera.
Apps: Samsung Apps offers an extensive collection of free and paid news, sports, weather, and
gaming content you can directly download to and enjoy on your TV.
On TV: Check a listing of programs that are currently airing or are scheduled to air.
Photos, Videos & Music: Play back photo, video, and music files from an external storage device.
Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support
Anynet+ with your Samsung TV’s remote.
e-Manual: Provides a detailed, on-screen user's manual built into your TV.
SMART Interaction: Using this function, you can access and control menu options and functions
using motions.
Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.
MHL & Screen Mirroring: Displays mobile device screens on your TV using a wired or wireless
connection.
Accessories
Included in this box
Remote Control Stand Parts and Cables
x 2
Smart Touch Control Power inlet cover Cable clip Wall mount adapter
Batteries (AAA x 2) IR extender TV holder kit Power cord
RCA Adapter x 2 Component adapter Base
x 2
x 8
Leg Screws
Also included: User manual, 3D active glasses, quick setup guide
[UF8000-ZC]BN68-04786B-08L02.indb 4 2013-10-28 �� 6:58:40
English - 5
Using the Smart Touch Control
TV
MIC
STB
SOURCE
VOICE
MORE
VOL
CH
LIGHT DVR MENU 3D
SMART HUB
GUIDERETURN
EXIT
MUTE
Touch Pad
• Drag on the touch pad to move the
focus on the screen.
• Press the touch pad to run,
activate, or select the highlighted
item.
• Press and hold the touch pad to
display the Channel List.
VOICE: Take your voice command and
enter a text using your voice.
Displays a virtual remote panel on the
screen. See the e-Manual chapter,
Controlling the TV > Using the Virtual
Remote Control.
Changes channels.
Displays the EPG
(Electronic Program Guide).
Brings up Smart Hub applications.
See the e-Manual chapter, SMART TV
Features > Smart Hub.
To exit an application that is
running easily, press the
button.
Turn on and off the satellite or cable
set-top box connected to the TV.
For this, the Smart Touch Control must
be configured as a universal remote
control. See the e-Manual chapter,
Controlling the TV > Universal
Remote Setup.
Turns the TV on and off.
Displays and selects the available video
sources.
Returns to the previous menu.
LIGHT: Turn on the backlight for the
buttons. The backlight lasts for only a
few seconds. Turns the remote control
light on or off. When on, the buttons
become illuminated for a moment when
pressed. (Using the remote control with
this button set to On will reduce the
battery usage time.)
DVR: This button is only available
when the Smart Touch Control is
configured to function as a universal
remote control to control a set-top box.
Run DVR (Digital Video Recording) in
set-top box.
MENU: Opens the OSD.
3D: Turns the 3D function on or off.
See e-Manual chapter,
TV Viewing > 3D TV.
TV
MIC
STB
SOURCE
VOICE
MORE
VOL
CH
LIGHT DVR MENU 3D
SMART HUB
GUIDERETURN
EXIT
MUTE
MUTE: Cuts
off the sound
temporarily.
Adjusts the volume.
Use Voice Recognition function with
the microphone embedded in remote
control.
The Voice Recognition function
can be affected by unclear
pronunciation, voice level, or
surrounding noise.
Basic Features
[UF8000-ZC]BN68-04786B-08L02.indb 5 2013-10-28 �� 6:58:41
English - 6
Connecting to the TV
In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
We recommend to use the Smart Touch Control in less than 20ft(6m). A usable distance may differ
depending on the wireless environmental conditions.
1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the
P button. The remote control receiver's location may vary depending on the model.
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt
to connect to the Smart Touch Control automatically.
<Attempting to connect and completion icons>
Inserting the Batteries (AAA X 2)
1 2 3
1. Slightly lift the battery cover using a plastic card. Next, pull on the cover’s notch with a fingernail to
remove the cover completely.
Check the location of the battery cover groove. The groove's location may vary depending on the
type of Smart Touch Control is provided with the product.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control, and then press down along the edges until
it is completely attached to the remote control.
[UF8000-ZC]BN68-04786B-08L02.indb 6 2013-10-28 �� 6:58:41
English - 7
Reconnecting the Smart Touch Control
If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused
by insufficient battery power. If the problem persists, press the PAIRING button on the Smart Touch Control
to restore pairing with the TV. The PAIRING button cannot be accessed without removing the Smart Touch
Control's battery cover. Within a distance between 1ft to 13.1ft(30cm to 4m), point the Smart Touch
Control to the TV receiver and press the PAIRING button. When pairing is complete, the pairing image
displays at the bottom left of the TV screen.
<The Smart Touch Control's pairing button>
Low Battery Power Warning
If the battery becomes low while using the Smart Touch Control, the following alarm window appears at the
bottom of the left screen. If the alarm window pops up, replace the batteries of the Smart Touch Control.
Use alkaline batteries for longer usage.
<Low battery alarm window>
[UF8000-ZC]BN68-04786B-08L02.indb 7 2013-10-28 �� 6:58:41
English - 8
Using the touch pad
Use the touch pad to implement various commands. Navigate to Tutorial (System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.
Dragging Pressing
Drag on the touch pad to move the focus, pointer, or highlight in the
direction the finger is dragging.
Press the touch pad to select the item highlighted or in focus.
When watching TV, press and hold the touch pad for 2 seconds displays
the channel list. On some apps, press and hold the touch pad for 2
seconds displays a list of functions available for the app.
Changing Channels by Entering Numbers
While watching TV, tap on the protruding line on the left or right edge of
the touchpad to bring up the numerical input window on the screen. Use
your finger to enter the number for the channel you want to watch. The
recognized number is displayed on the screen and the TV switches to
the corresponding channel. However, the number you have entered may
not be recognized properly by the TV. Refer to the guide below to ensure
that your numerical entries are recognized accurately.
Numerical Input Guide
Refer to the diagrams below when entering numerical values. The TV may not recognize your entries if you
do not follow the sequences shown below.
[UF8000-ZC]BN68-04786B-08L02.indb 8 2013-10-28 �� 6:58:42
English - 9
Show Status and Notification Banner
Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel
that appears on the screen. The status and notification banner appears at the top of the screen. For more
information about using the status and notification banner, refer to e-Manual > SMART TV Features >
Status and Notification.
Recommended
Press the RECOMM. / SEARCH button and then select the Recommended from the list on bottom of the
screen. This shows the current/scheduled program and application recommendations.
Select a program that is currently airing to jump to the corresponding channel or a program that is
scheduled to air to set up a Schedule Viewing setting. Refer to e-Manual > SMART TV Features > On TV
for more information.
Select an application to launch. Samsung Apps will launch if the selected application is not installed on the
TV. Refer to e-Manual > SMART TV Features > Apps > Samsung Apps for more information.
History
Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of
the screen. This displays an interactive list of recently accessed channels, media content and applications.
Searching
Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the
screen. Press the RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search
criteria to search not only many apps and their contents on the TV but also the Web.
Refer to e-Manual > SMART TV Features > Searching for more information.
Using the Virtual Remote Control
Press the MORE button to display the virtual remote panel on the TV screen. The virtual remote panel
consists of the number panel, a playback control panel, and the quick access panel. Use the touch pad to
highlight and select icons, numbers, and buttons on the panels.
The displayed virtual remote panel on the TV screen may differ depending on the country.
Changing the Virtual Remote Panel
You can change which virtual remote panel is displayed on the TV screen. To shift between panels, move
the focus highlight beyond the left or right edge of the displayed panel.
Use left/right scroll function on the touch pad to change the panel easily.
[UF8000-ZC]BN68-04786B-08L02.indb 9 2013-10-28 �� 6:58:42
English - 10
Change a position of the Virtual Remote Panel
Press the MORE button on the Smart Touch Control. The virtual remote panel appears on the screen.
Press and hold the touch pad for one second. Users can change a position of the virtual remote panel of
the screen.
Using the Number Panel
Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while
watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to
previous channels.
Using the Playback Control Panel
Use the playback control panel to pause, rewind, fast forward, skip to the next file, select a function with
the a, b, {, } buttons, and much more while enjoying media content.
Using the Quick Access Panel
Use the buttons on the quick access panel to bring up the TV's INFO, TOOLS, or e-Manual screens. Note
that the buttons that appear may vary depending on the operating mode of the Smart Touch Control (with
the TV only, as a universal remote, etc.).
Turning on the TV
Turn on the TV using the P button on the Smart Touch Control or TV panel.
The first time you turn on your TV, it will immediately start the initial setup.
The product color and shape may vary depending on the model.
The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV
without the remote control.
mR
P
TV
MIC
STB
SOURCE
VOICE
MORE
VOL
CH
LIGHT
DVR
MENU
3D
SMART HUB
GUIDERETURN
EXIT
Open Smart Hub.
Turn off the TV.
Select a source.Open the menu.
TV Controller
The control stick is located at the
lower-left corner on the back of the TV.
Camera
Remote control sensor
When you use the Smart Touch Control,
the standby LED does not respond,
except when you press the
P
button.
[UF8000-ZC]BN68-04786B-08L02.indb 10 2013-10-28 �� 6:58:43
English - 11
Built-in TV Camera and Microphone
This TV features a built-in TV camera and microphone that you can use for the Motion Control, Voice
Recognition, and Face Recognition features. You can also use the camera's angle adjustment knob to
change the camera's viewing angle.
From the Top From Behind
Microphone
Lens
Knob for camera's angle adjustment
Microphone
Do not touch the lens while operating the TV camera.
You can leave fingerprints that may affect the image quality.
If the lens gets dirty, clean it using a soft piece of cloth.
Extending the TV Camera
To use the TV camera, you must first extend it.
Gently push the camera in without touching the lens until you hear a click. The camera pops up.
Retracting the Camera
If you are not using the TV camera, keep it retracted inside the TV. The Motion Control and Face
Recognition features cannot be used while the TV camera is in the retracted state, but Voice Recognition
will still be available.
Gently push the camera in without touching the lens until you hear a click.
[UF8000-ZC]BN68-04786B-08L02.indb 11 2013-10-28 �� 6:58:45
English - 12
Switching Between Video Sources
Press the SOURCE button to switch between devices connected to the TV.
For example, to switch to a game console connected to the second HDMI connector, press the SOURCE
button. From the Source list, select HDMI2. The connector names may vary depending on the product.
Select Tools at the upper-right corner of the source screen to access the following functions.
Edit Name: Lets you associate a device name to an input source.
You can select the following device names in the Edit Name option:
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI
PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA
To associate a device name to an input source, follow these steps:
1. Select Tools in the upper right corner of the source screen.
2. Select Edit Name.
3. Find the input source you want in the Source list (HDMI1, HDMI2, Component, etc.).
4. Select the blank field next to the input.
5. In the device name list that appears, select the name of the device attached to the input.
When you view the Source list, the device name and the input jack will be displayed together.
If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI cable, select PC from the
device name list.
If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI to DVI cable, select DVI PC
from the device name list.
If you connected an AV device to the HDMI IN 2 (DVI) port with an HDMI to DVI cable, select DVI
Devices from the device name list.
Information: View detailed information about the connected devices.
Anynet+ (HDMI-CEC): A list appears showing Anynet+ compatible ones of external devices connected
to the TV.
Remove USB: Remove the USB device from the list safely. This function is only available when the
USB device selected.
Universal Remote Setup: Use to configure universal remote control settings. Using the universal remote
control, you can control external devices connected to the TV, such as a set-top box, Blu-ray player, and
AV receiver.
[UF8000-ZC]BN68-04786B-08L02.indb 12 2013-10-28 �� 6:58:46
English - 13
Universal Remote Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home
theaters, and other third-party external devices connected to the TV using the TV's remote control.
2 inches
Keep a distance of 2 inches at least between the IR Extender and the external device, as the illustration
shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should
be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with
the transmission of the remote control signal.
Add the External Device
1. Turn on the external device you wish to set up universal remote function for and then press the
SOURCE to bring up the Source screen.
2. Select Universal Remote Setup from the top of the screen. This initiates the universal remote setup
process.
3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the
remote control by entering the model number manually.
[UF8000-ZC]BN68-04786B-08L02.indb 13 2013-10-28 �� 6:58:46
English - 14
Viewing the e-Manual
This TV has a built-in e-Manual that contains information about your TV's key features and instructions for
using them. To view the e-Manual, use one of the following methods:
Open the Support menu and choose e-Manual (Troubleshooting).
Press the MORE button on the Smart Touch Control to display the virtual remote panel on the TV
screen. Flick the touch pad until the quick access panel appears, select the e-Manual icon, and then
press the touch pad.
In the e-Manual, words in blue refer to screen menu options and words in light blue refer to remote
control buttons.
A printable version of this guide is also available at www.samsung.com/support.
Scrolling a Page
To scroll a page, use of one of the following methods:
Place the focus on the
or button at the right edge of the screen, and then press the touch pad.
Drag or flick up or down the line on either the left or right edge of the touch pad.
Place the focus on the
or button at the right edge of the screen, drag or flick up or down on the
touch pad.
Using the Top Icons
Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through
pages. These icons are available after you have viewed two or more pages.
Returning to the Home Page
To return to the home page, select the a button or select on the top right of the screen.
To select a letter button (a, b, {, }), press the MORE button on the Smart Touch Control to display
to display the virtual remote panel on the TV screen. Flick the touch pad until the playback control
panel appears, select the a button, and then press the touch pad.
Searching the Index
Select the b button or select on the top right of the screen to display the index. Select a term to
display the page containing the term.
Viewing the e-Manual
[UF8000-ZC]BN68-04786B-08L02.indb 14 2013-10-28 �� 6:58:47
English - 15
Searching Pages
Select the { button or select on the top right of the screen, and enter search criteria. Select a page
from the list of search results to display it.
Closing the e-Manual
To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the
screen.
Jumping to a Menu Item
To jump directly to the menu item that is described in the current section, select . It is possible to
jump from a menu item directly to the related section in the e-Manual. On a menu screen, press the MORE
button on the Smart Touch Control and then select e-Manual on the virtual remote panel that appears on
the screen.
This feature may not be available, depending on the menu.
Picture
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Standard
14
100
45
50
50
R50
G50
e-Manual
Try Now
Updating the e-Manual
Press the button and select Apps, and then select More Apps. The e-Manual can be updated in the
same way with an application update.
On the More Apps screen, select Update Apps, and then select e-Manual from the list. The e-Manual
starts updating to the latest version. However, Update Apps appears on the screen only when the update
is required.
[UF8000-ZC]BN68-04786B-08L02.indb 15 2013-10-28 �� 6:58:48
English - 16
Network Configuration
Connecting to a Network
Connecting the TV to a network gives you access to online services such as Smart Hub and lets you
update the TV's software online directly from Samsung.com.
Network Connection - Wireless
Connect the TV to the Internet using a standard wireless router or modem.
Wireless IP Router or Modem
that has a DHCP Server
LAN Cable (Not Supplied)
The LAN Port on the Wall
Wireless Network Precautions
This TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using
IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play
smoothly.
To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless
router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
Select a channel that is not currently in use for the wireless router. If the channel set for the
wireless router is currently being used by another device, the result is usually interference and/or a
communications failure.
Most wireless networks have an optional security system. To enable a wireless network's security
system, you need to create a security key using characters and numbers, and then enter that key into
the router through its menu. You then must enter this security key into any other devices you want to
connect to the wireless network.
Network Security Protocols
The TV only supports the following wireless network security protocols:
Authentication Modes: WEP, WPAPSK, WPA2PSK
Encryption Types: WEP, TKIP, AES
In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP
security encryption in networks running in the 802.11n mode.
If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using
PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures
the SSID and WPA key settings.
Your Smart TV cannot connect to uncertified wireless routers.
[UF8000-ZC]BN68-04786B-08L02.indb 16 2013-10-28 �� 6:58:48
English - 17
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending on your network
setup. They are illustrated below:
The Modem Port on the Wall
Modem Cable (Not Supplied) LAN Cable (Not Supplied)
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel
The Modem Port on the Wall
Modem Cable
(Not Supplied)
LAN Cable
(Not Supplied)
LAN Cable
(Not Supplied)
External Modem
(ADSL / VDSL / Cable TV)
IP Router that has a
DHCP Server
TV Rear Panel
The LAN Port on the Wall
LAN Cable (Not Supplied)
The TV does not support network speeds less than or equal to 10Mbps.
Use Cat 7 cable for the connection.
[UF8000-ZC]BN68-04786B-08L02.indb 17 2013-10-28 �� 6:58:49
English - 18
3D Basics
3D Active Glasses
Features
Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D
glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.
The Samsung 3D glasses are only compatible with Samsung D, E, and F series 3D TV's that were
released in 2011, 2012, and 2013. These 3D glasses cannot be connected to other Bluetooth devices.
Parts
LED Indicator & Power Button
Liquid crystal shutter
Battery Cover
For details on how to attach the glasses'
temples, refer to the separate 3D glasses
manual.
Replacing the Battery
If the red LED blinks every two seconds continually, replace the battery with a new one.
Insert the "+" side of the battery into the side marked with "+" in the battery compartment.
To check the remaining battery capacity, refer to the pairing section in this manual.
Pull the battery cover
downward
Open the battery cover Remove the battery Replace the battery Push the battery cover
downward
Close the battery cover
Pairing 3D Active Glasses
What is Pairing? Pairing is the process of connecting 3D glasses and a 3D TV so that the two devices
can exchange data.
Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm) apart from each other
while pairing is in progress.
[UF8000-ZC]BN68-04786B-08L02.indb 18 2013-10-28 �� 6:58:50
English - 19
Turning the glasses on
Press the power button briefly. The green LED turns on for 3 seconds.
(Make sure that 3D is activated on the TV before using the 3D glasses.)
Turning the glasses off
Press the power button briefly. The red LED turns on for 3 seconds.
Performing the pairing process
Turn the TV on and let it power up completely. Press and hold the Power
button on the glasses. The green and the red LEDs blink alternately for 2
seconds.
Operating range
2~6m
50cm
Recommended pairing distance
Recommended viewing distance
Recommended viewing distance Recommended pairing distance
2~6m (6.5 to 19.5 ft) 50 cm or less (19.5 in)
Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This
feature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)
If you keep trying to pair the glasses and the TV after pairing has failed, the battery level will decrease
significantly. However, the battery level will recover to a certain degree in about a minute.
The working distance is affected by the presence of obstacles (a person, metal, walls, etc.) between
the glasses and the TV and the strength of the Bluetooth signal.
Turn off the 3D glasses when they are not in use. If you leave the 3D glasses on, the battery lifespan
decreases.
Pairing steps
1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.
2. Press the power button on the 3D glasses briefly. The 3D glasses will power on and pairing will start.
3. The message “3D glasses are connected to TV.” will be displayed on the TV screen when the pairing is
successfully completed.
If pairing fails, the 3D glasses will power off.
If the first attempt to pair fails, power the TV off and on again and perform step 2.
How to pair again: Press the power button on the 3D glasses for more than 1 second.
You must pair the glasses again in the following situations:
If the 3D glasses do not function, even when the power button is pressed, especially if the TV has
just been a repaired.
If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F
series released in 2011 through 2013. You must pair the glasses with the other TV.
[UF8000-ZC]BN68-04786B-08L02.indb 19 2013-10-28 �� 6:58:50
English - 20
Watching 3D Video
Some 3D modes may not be available depending on the format of the image source.
To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button.
1. Go to the 3D screen. (Picture > 3D)
2. Select the 3D Mode. The 3D Mode screen appears.
3. Set the 3D Mode of the image you want to view.
Troubleshooting
If you encounter... Try this...
My 3D glasses do not work.
Replace the battery.
The 3D glasses should be close to the TV. Make sure that the distance
between the TV and your 3D glasses is less than 19.5 feet (6m) in a
straight line.
Check the 3D function settings of your TV.
The LED keeps blinking The battery is dead. Replace the battery.
Specifications (Model Number: SSG-5100GB)
Optics
Shutters Liquid crystal Transmittance 36±2%
Recommended
operating
distance
2 ~ 6m (6.5 to 19.5 ft) Field Rate 120 fields/second
Weight Glasses 21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. )
Power Glasses One 3V lithium/manganese dioxide battery 3V (CR2025)
Power
consumption
Glasses 0.85mA (Average)
Battery
Type 165mAh, 3.0V (CR2025)
Operating time 150 hours
Operating
conditions
Operating
temperature
50 °F ~ 104 °F (10°C ~ 40°C)
Custody
temperature
-4 °F ~ 113 °F (-20°C ~ 45°C)
Product specifications may be changed without notice in order to enhance product performance.
The continuous operating time may differ depending on the wireless communication environment and
usage conditions.
[UF8000-ZC]BN68-04786B-08L02.indb 20 2013-10-28 �� 6:58:50
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70

Samsung UN46F8000AF Guide de démarrage rapide

Taper
Guide de démarrage rapide
Ce manuel convient également à

dans d''autres langues